aboutsummaryrefslogtreecommitdiffstats
path: root/fs/nfs/pnfs.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-01-06pnfs: layout roc codeFred Isaman1-0/+29
A layout can request return-on-close. How this interacts with the forgetful model of never sending LAYOUTRETURNS is a bit ambiguous. We forget any layouts marked roc, and wait for them to be completely forgotten before continuing with the close. In addition, to compensate for races with any inflight LAYOUTGETs, and the fact that we do not get any layout stateid back from the server, we set the barrier to the worst case scenario of current_seqid + number of outstanding LAYOUTGETS. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06pnfs: add CB_LAYOUTRECALL handlingFred Isaman1-0/+11
This is the heart of the wave 2 submission. Add the code to trigger drain and forget of any afected layouts. In addition, we set a "barrier", below which any LAYOUTGET reply is ignored. This is to compensate for the fact that we do not wait for outstanding LAYOUTGETs to complete as per section 12.5.5.2.1 of RFC 5661. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06pnfs: change lo refcounting to atomic_tFred Isaman1-2/+2
This will be required to allow us to grab reference outside of i_lock. While we are at it, make put_layout_hdr take the same argument as all the related functions. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06pnfs: serialize LAYOUTGET(openstateid)Fred Isaman1-0/+1
We shouldn't send a LAYOUTGET(openstateid) unless all outstanding RPCs using the previous stateid are completed. This requires choosing the stateid to encode earlier, so we can abort if one is not available (we want to use the open stateid, but a LAYOUTGET is already out using it), and adding a count of the number of outstanding rpc calls using layout state (which for now consist solely of LAYOUTGETs). Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06pnfs: change how lsegs are removed from layout listFred Isaman1-1/+7
This is to prepare the way for sensible io draining. Instead of just removing the lseg from the list, we instead clear the VALID flag (preventing new io from grabbing references to the lseg) and remove the reference holding it in the list. Thus the lseg will be removed once any io in progress completes and any references still held are dropped. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06pnfs: change layout state seqlock to a spinlockFred Isaman1-4/+3
This prepares for future changes, where the layout state needs to change atomically with several other variables. In particular, it will need to know if lo->segs is empty, as we test that instead of manipulating the NFS_LAYOUT_STATEID_SET bit. Moreover, the layoutstateid is not really a read-mostly structure, as it is written almost as often as it is read. The behavior of pnfs_get_layout_stateid is also slightly changed, so that it no longer changes the stateid. Its name is changed to +pnfs_choose_layoutget_stateid. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06pnfs: add prefix to struct pnfs_layout_hdr fieldsFred Isaman1-6/+6
Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-06pnfs: add prefix to struct pnfs_layout_segment fieldsFred Isaman1-5/+5
While we are renaming all the fields, change lo->state to lo->plh_flags. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24NFSv4.1: Use more sensible names for 'initialize_mountpoint'Trond Myklebust1-2/+2
The initialize_mountpoint/uninitialise_mountpoint functions are really about setting or clearing the layout driver to be used on this filesystem. Change the names to the more descriptive 'set_layoutdriver/clear_layoutdriver'. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24NFSv4.1: pnfs: add LAYOUTGET and GETDEVICEINFO infrastructureAndy Adamson1-1/+72
Add the ability to actually send LAYOUTGET and GETDEVICEINFO. This also adds in the machinery to handle layout state and the deviceid cache. Note that GETDEVICEINFO is not called directly by the generic layer. Instead it is called by the drivers while parsing the LAYOUTGET opaque data in response to an unknown device id embedded therein. RFC 5661 only encodes device ids within the driver-specific opaque data. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Dean Hildebrand <dhildebz@umich.edu> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24NFS: client needs to maintain list of inodes with active layoutsAndy Adamson1-0/+14
In particular, server reboot will invalidate all layouts. Note that in order to have an active layout, we must get a successful response from the server. To avoid adding that machinery, this patch just includes a stub that fakes up a successful return. Since the layout is never referenced for io, this is not a problem. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Dean Hildebrand <dhildebz@umich.edu> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24NFS: create and destroy inode's layout cacheBenny Halevy1-0/+39
At the start of the io paths, try to grab the relevant layout information. This will initiate the inode's layout cache, but stubs ensure the cache stays empty. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Dean Hildebrand <dhildebz@umich.edu> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24NFSv4.1: pnfs: full mount/umount infrastructureFred Isaman1-0/+9
Allow a module implementing a layout type to register, and have its mount/umount routines called for filesystems that the server declares support it. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Andy Adamson<andros@netapp.com> Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24NFS: set layout driverRicardo Labiaga1-0/+56
Put in the infrastructure that uses information returned from the server at mount to select a layout driver module. In this patch, a stub is used that always returns "no driver found". Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Dean Hildebrand <dhildebz@umich.edu> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.