| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We weren't reclaiming the clusters which get free'd from this function,
so any user punching holes in a file would still have those bytes accounted
against him/her. Add the call to vfs_dq_free_space_nodirty() to fix this.
Interestingly enough, the journal credits calculation already took this into
account.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Jan Kara <jack@suse.cz>
|
|
When two nodes holding PR locks on a resource concurrently attempt to
upconvert the locks to EX, the master sends a BAST to one of the nodes. This
message tells that node to first cancel convert the upconvert request,
followed by downconvert to a NL. Only when this lock is downconverted to NL,
can the master upconvert the first node's lock to EX.
While the fs was doing the cancel convert, it was forgetting to wake up the
dc thread after a successful cancel, leading to a deadlock.
Reported-and-Tested-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
In ocfs2_xattr_value_truncate, we may call b-tree codes which will
extend the journal transaction. It has a potential problem that it
may let the already-accessed-but-not-dirtied buffers gone. So we'd
better access the bucket after we call ocfs2_xattr_value_truncate.
And as for the root buffer for the xattr value, b-tree code will
acess and dirty it, so we don't need to worry about it.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
It could happen that some limit has been set via quotactl() and in parallel
->mark_dirty() is called from another thread doing e.g. dquot_alloc_space(). In
such case ocfs2_write_dquot() must not try to sync the dquot because that needs
global quota lock but that ranks above transaction start.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Dropping of last reference to dentry lock is a complicated operation involving
dropping of reference to inode. This can get complicated and quota code in
particular needs to obtain some quota locks which leads to potential deadlock.
Thus we defer dropping of inode reference to ocfs2_wq.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6:
ocfs2: Remove ocfs2_dquot_initialize() and ocfs2_dquot_drop()
quota: Improve locking
|
|
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
|
|
Since ->acquire_dquot and ->release_dquot callbacks aren't called under
dqptr_sem anymore, we don't have to start a transaction and obtain locks
so early. So we can just remove all this complicated stuff.
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mark Fasheh <mfasheh@suse.de>
|
|
When I review ocfs2 code, find there are 2 typos to "successfull". After
doing grep "successfull " in kernel tree, 22 typos found totally -- great
minds always think alike :)
This patch fixes all the similar typos. Thanks for Randy's ack and comments.
Signed-off-by: Coly Li <coyli@suse.de>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Roland Dreier <rolandd@cisco.com>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Vlad Yasevich <vladislav.yasevich@hp.com>
Cc: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
- (better, more, bigger ...) then -> (...) than
Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (138 commits)
ocfs2: Access the right buffer_head in ocfs2_merge_rec_left.
ocfs2: use min_t in ocfs2_quota_read()
ocfs2: remove unneeded lvb casts
ocfs2: Add xattr support checking in init_security
ocfs2: alloc xattr bucket in ocfs2_xattr_set_handle
ocfs2: calculate and reserve credits for xattr value in mknod
ocfs2/xattr: fix credits calculation during index create
ocfs2/xattr: Always updating ctime during xattr set.
ocfs2/xattr: Remove extend_trans call and add its credits from the beginning
ocfs2/dlm: Fix race during lockres mastery
ocfs2/dlm: Fix race in adding/removing lockres' to/from the tracking list
ocfs2/dlm: Hold off sending lockres drop ref message while lockres is migrating
ocfs2/dlm: Clean up errors in dlm_proxy_ast_handler()
ocfs2/dlm: Fix a race between migrate request and exit domain
ocfs2: One more hamming code optimization.
ocfs2: Another hamming code optimization.
ocfs2: Don't hand-code xor in ocfs2_hamming_encode().
ocfs2: Enable metadata checksums.
ocfs2: Validate superblock with checksum and ecc.
ocfs2: Checksum and ECC for directory blocks.
...
|
|
... and don't bother in callers. Don't bother with zeroing i_blocks,
while we are at it - it's already been zeroed.
i_mode is not worth the effort; it has no common default value.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
In commit "ocfs2: Use metadata-specific ocfs2_journal_access_*()
functions", the wrong buffer_head is accessed. So change it
to the right buffer_head.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
This is preferred to min().
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
dlmglue.c has lots of code which casts the return value of ocfs2_dlm_lvb().
This is pointless however, as ocfs2_dlm_lvb() returns void *.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
We must check whether ocfs2 volume support xattr in init_security,
if not support xattr and security is enable, would cause failure of mknod.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
In extreme situation, may need xattr bucket for setting
security entry and acl entries during mknod. This only
happens when block size is too small.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
We extend the credits for xattr's large value in set_value_outside
before, this can give rise to a credits issue when we set one security
entry and two acl entries duing mknod. As we remove extend_trans form
set_value_outside, we must calculate and reserve the credits for
xattr's large value in mknod.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
When creating a xattr index block, the old calculation forget
to add credits for the meta change of the alloc file. So add
more credits and more comments to explain it.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
In xattr set, we should always update ctime if the operation goes
sucessfully. The old one mistakenly put it in ocfs2_xattr_set_entry
which is only called when we set xattr in inode or xattr block. The
side benefit is that it resolve the bug 1052 since in that scenario,
ocfs2_calc_xattr_set_need only calc out the xattr set credits while
ocfs2_xattr_set_entry update the inode also which isn't concerned with
the process of xattr set.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Actually, when setting a new xattr value, we know it from the very
beginning, and it isn't like the extension of bucket in which case
we can't figure it out. So remove ocfs2_extend_trans in that function
and calculate it before the transaction. It also relieve acl operation
from the worry about the side effect of ocfs2_extend_trans.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
dlm_get_lock_resource() is supposed to return a lock resource with a proper
master. If multiple concurrent threads attempt to lookup the lockres for the
same lockid while the lock mastery in underway, one or more threads are likely
to return a lockres without a proper master.
This patch makes the threads wait in dlm_get_lock_resource() while the mastery
is underway, ensuring all threads return the lockres with a proper master.
This issue is known to be limited to users using the flock() syscall. For all
other fs operations, the ocfs2 dlmglue layer serializes the dlm op for each
lockid.
Users encountering this bug will see flock() return EINVAL and dmesg have the
following error:
ERROR: Dlm error "DLM_BADARGS" while calling dlmlock on resource <LOCKID>: bad api args
Reported-by: Coly Li <coyli@suse.de>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
This patch adds a new lock, dlm->tracking_lock, to protect adding/removing
lockres' to/from the dlm->tracking_list. We were previously using dlm->spinlock
for the same, but that proved inadequate as we could be freeing a lockres from
a context that did not hold that lock. As the new lock only protects this list,
we can explicitly take it when removing the lockres from the tracking list.
This bug was exposed when testing multiple processes concurrently flock() the
same file.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
During lockres purge, o2dlm sends a drop reference message to the lockres
master. This patch delays the message if the lockres is being migrated.
Fixes oss bugzilla#1012
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1012
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Patch cleans printed errors in dlm_proxy_ast_handler(). The errors now includes
the node number that sent the (b)ast. Also it reduces the number of endian swaps
of the cookie.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Patch address a racing migrate request message and an exit domain message.
Instead of blocking exit domains for the duration of the migrate, we ignore
failure to deliver that message. This is because an exiting domain should
not have any active locks and thus has no role to play in the migration.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
The previous optimization used a fast find-highest-bit-set operation to
give us a good starting point in calc_code_bit(). This version lets the
caller cache the previous code buffer bit offset. Thus, the next call
always starts where the last one left off.
This reduces the calculation another 39%, for a total 80% reduction from
the original, naive implementation. At least, on my machine. This also
brings the parity calculation to within an order of magnitude of the
crc32 calculation.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
In the calc_code_bit() function, we must find all powers of two beneath
the code bit number, *after* it's shifted by those powers of two. This
requires a loop to see where it ends up.
We can optimize it by starting at its most significant bit. This shaves
32% off the time, for a total of 67.6% shaved off of the original, naive
implementation.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
When I wrote ocfs2_hamming_encode(), I was following documentation of
the algorithm and didn't have quite the (possibly still imperfect) grasp
of it I do now. As part of this, I literally hand-coded xor. I would
test a bit, and then add that bit via xor to the parity word.
I can, of course, just do a single xor of the parity word and the source
word (the code buffer bit offset). This cuts CPU usage by 53% on a
mostly populated buffer (an inode containing utmp.h inline).
Joel
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Add OCFS2_FEATURE_INCOMPAT_META_ECC to the list of supported features.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
The superblock is read via a raw call. Validate it after we find it
from its signature.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Use the db_check field of ocfs2_dir_block_trailer to crc/ecc the
dirblocks.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Future ocfs2 features metaecc and indexed directories need to store a
little bit of data in each dirblock. For compatibility, we place this
in a trailer at the end of the dirblock. The trailer plays itself as an
empty dirent, so that if the features are turned off, it can be reused
without requiring a tunefs scan.
This code adds the trailer and validates it when the block is read in.
[ Mark is the original author, but I reinserted this code before his
dir index work. -- Joel ]
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Change the rest of the naked ocfs2_journal_access() calls in
fs/ocfs2/xattr.c to use the appropriate ocfs2_journal_access_*() call
for their metadata type.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
ocfs2_remove_value_outside() needs to know the type of buffer it is
looking at. Pass in an ocfs2_xattr_value_buf.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
ocfs2_xattr_set_entry is the function that knows what type of block it
is setting into. This is what we wanted from ocfs2_xattr_value_buf.
Plus, moving the value buf up into ocfs2_xattr_set_entry() allows us to
pass it into ocfs2_xattr_set_value_outside() and ocfs2_xattr_cleanup().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
ocfs2_xattr_update_entry() updates the entry portion of an xattr buffer.
This can be part of multiple metadata block types, so pass the buffer in
via an ocfs2_xattr_value_buf.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
The callers of ocfs2_xattr_value_truncate() now pass in
ocfs2_xattr_value_bufs. These callers are the ones that calculated the
xv location, so they are the right starting point.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Place an ocfs2_xattr_value_buf in ocfs2_xattr_value_truncate() and pass
it down to ocfs2_xattr_shrink_size(). We can also pass it into
ocfs2_xattr_extend_allocation(), replacing its ocfs2_xattr_value_buf.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Place an ocfs2_xattr_value_buf in __ocfs2_xattr_shrink_size() and pass
it down to __ocfs2_remove_xattr_range().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
When an ocfs2 extended attribute is large enough to require its own
allocation tree, we root it with an ocfs2_xattr_value_root. However,
these roots can be a part of inodes, xattr blocks, or xattr buckets.
Thus, they need a different journal access function for each container.
We wrap the bh, its journal access function, and the value root (xv) in
a structure called ocfs2_xattr_valu_buf. This is a package that can
be passed around. In this first pass, we simply pass it to the
extent tree code.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
The xattr bucket can span multiple blocks on disk. We have wrappers
for this structure in the code. We use the new multi-block ecc calls to
calculate and validate the bucket.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
The per-metadata-type ocfs2_journal_access_*() functions hook up jbd2
commit triggers and allow us to compute metadata ecc right before the
buffers are written out. This commit provides ecc for inodes, extent
blocks, group descriptors, and quota blocks. It is not safe to use
extened attributes and metaecc at the same time yet.
The ocfs2_extent_tree and ocfs2_path abstractions in alloc.c both hide
the type of block at their root. Before, it didn't matter, but now the
root block must use the appropriate ocfs2_journal_access_*() function.
To keep this abstract, the structures now have a pointer to the matching
journal_access function and a wrapper call to call it.
A few places use naked ocfs2_write_block() calls instead of adding the
blocks to the journal. We make sure to calculate their checksum and ecc
before the write.
Since we pass around the journal_access functions. Let's typedef them
in ocfs2.h.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
The majority of ocfs2_new_path() calls are:
ocfs2_new_path(path_root_bh(otherpath),
path_root_el(otherpath));
Let's call that ocfs2_new_path_from_path(). The rest do similar things
from struct ocfs2_extent_tree. Let's call those
ocfs2_new_path_from_et(). This will make the next change easier.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
We create wrappers for ocfs2_journal_access() that are specific to the
type of metadata block. This allows us to associate jbd2 commit
triggers with the block. The triggers will compute metadata ecc in a
future commit.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Add block check calls to the read_block validate functions. This is the
almost all of the read-side checking of metaecc. xattr buckets are not checked
yet. Writes are also unchecked, and so a read-write mount will quickly fail.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Add a currently-returns-success hook for quota block reads. We'll be
adding checks to this.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
This is the code that computes crc32 and ecc for ocfs2 metadata blocks.
There are high-level functions that check whether the filesystem has the
ecc feature, mid-level functions that work on a single block or array of
buffer_heads, and the low-level ecc hamming code that can handle
multiple buffers like crc32_le().
It's not hooked up to the filesystem yet.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Define struct ocfs2_block_check, an 8-byte structure containing a 32bit
crc32_le and a 16bit hamming code ecc. This will be used for metadata
checksums. Add the structure to free spaces in the various metadata
structures.
Add the OCFS2_FEATURE_INCOMPAT_META_ECC bit.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
Mark Fasheh
Sunil Mushran
Tao Ma
Jan Kara
Linus Torvalds
Alexey Dobriyan
Coly Li
Fernando Carrijo
Frederik Schwarzer
Al Viro
Tiger Yang
Joel Becker