aboutsummaryrefslogtreecommitdiffstats
path: root/fs/proc/task_mmu.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-02-10mm: drop vm_ops->remap_pages and generic_file_remap_pages() stubKirill A. Shutemov18-26/+0
Nobody uses it anymore. [akpm@linux-foundation.org: fix filemap_xip.c] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10mm: drop support of non-linear mapping from fault codepathKirill A. Shutemov2-65/+16
We don't create non-linear mappings anymore. Let's drop code which handles them on page fault. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10mm: drop support of non-linear mapping from unmap/zap codepathKirill A. Shutemov3-70/+22
We have remap_file_pages(2) emulation in -mm tree for few release cycles and we plan to have it mainline in v3.20. This patchset removes rest of VM_NONLINEAR infrastructure. Patches 1-8 take care about generic code. They are pretty straight-forward and can be applied without other of patches. Rest patches removes pte_file()-related stuff from architecture-specific code. It usually frees up one bit in non-present pte. I've tried to reuse that bit for swap offset, where I was able to figure out how to do that. For obvious reason I cannot test all that arch-specific code and would like to see acks from maintainers. In total, remap_file_pages(2) required about 1.4K lines of not-so-trivial kernel code. That's too much for functionality nobody uses. Tested-by: Felipe Balbi <balbi@ti.com> This patch (of 38): We don't create non-linear mappings anymore. Let's drop code which handles them on unmap/zap. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10mm: replace remap_file_pages() syscall with emulationKirill A. Shutemov6-298/+79
remap_file_pages(2) was invented to be able efficiently map parts of huge file into limited 32-bit virtual address space such as in database workloads. Nonlinear mappings are pain to support and it seems there's no legitimate use-cases nowadays since 64-bit systems are widely available. Let's drop it and get rid of all these special-cased code. The patch replaces the syscall with emulation which creates new VMA on each remap_file_pages(), unless they it can be merged with an adjacent one. I didn't find *any* real code that uses remap_file_pages(2) to test emulation impact on. I've checked Debian code search and source of all packages in ALT Linux. No real users: libc wrappers, mentions in strace, gdb, valgrind and this kind of stuff. There are few basic tests in LTP for the syscall. They work just fine with emulation. To test performance impact, I've written small test case which demonstrate pretty much worst case scenario: map 4G shmfs file, write to begin of every page pgoff of the page, remap pages in reverse order, read every page. The test creates 1 million of VMAs if emulation is in use, so I had to set vm.max_map_count to 1100000 to avoid -ENOMEM. Before: 23.3 ( +- 4.31% ) seconds After: 43.9 ( +- 0.85% ) seconds Slowdown: 1.88x I believe we can live with that. Test case: #define _GNU_SOURCE #include <assert.h> #include <stdlib.h> #include <stdio.h> #include <sys/mman.h> #define MB (1024UL * 1024) #define SIZE (4096 * MB) int main(int argc, char **argv) { unsigned long *p; long i, pass; for (pass = 0; pass < 10; pass++) { p = mmap(NULL, SIZE, PROT_READ|PROT_WRITE, MAP_SHARED | MAP_ANONYMOUS, -1, 0); if (p == MAP_FAILED) { perror("mmap"); return -1; } for (i = 0; i < SIZE / 4096; i++) p[i * 4096 / sizeof(*p)] = i; for (i = 0; i < SIZE / 4096; i++) { if (remap_file_pages(p + i * 4096 / sizeof(*p), 4096, 0, (SIZE - 4096 * (i + 1)) >> 12, 0)) { perror("remap_file_pages"); return -1; } } for (i = SIZE / 4096 - 1; i >= 0; i--) assert(p[i * 4096 / sizeof(*p)] == SIZE / 4096 - i - 1); munmap(p, SIZE); } return 0; } [akpm@linux-foundation.org: fix spello] [sasha.levin@oracle.com: initialize populate before usage] [sasha.levin@oracle.com: grab file ref to prevent race while mmaping] Signed-off-by: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Dave Jones <davej@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Armin Rigo <arigo@tunes.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10mm/vmstat.c: fix/cleanup ifdefsAndrew Morton1-62/+62
CONFIG_COMPACTION=y, CONFIG_DEBUG_FS=n: mm/vmstat.c:690: warning: 'frag_start' defined but not used mm/vmstat.c:702: warning: 'frag_next' defined but not used mm/vmstat.c:710: warning: 'frag_stop' defined but not used mm/vmstat.c:715: warning: 'walk_zones_in_node' defined but not used It's all a bit of a tangly mess and it's unclear why CONFIG_COMPACTION figures in there at all. Move frag_start/frag_next/frag_stop and migratetype_names[] into the existing CONFIG_PROC_FS block. walk_zones_in_node() gets a special ifdef. Also move the #include lines up to where #include lines live. [axel.lin@ingics.com: fix build error when !CONFIG_PROC_FS] Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Tested-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10mm/slab_common.c: use kmem_cache_free()Vaishali Thakkar1-1/+1
Here, free memory is allocated using kmem_cache_zalloc. So, use kmem_cache_free instead of kfree. This is done using Coccinelle and semantic patch used is as follows: @@ expression x,E,c; @@ x = \(kmem_cache_alloc\|kmem_cache_zalloc\|kmem_cache_alloc_node\)(c,...) ... when != x = E when != &x ?-kfree(x) +kmem_cache_free(c,x) Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10mm/slub.c: fix typo in commentKim Phillips1-1/+1
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10mm: don't use compound_head() in virt_to_head_page()Joonsoo Kim1-1/+26
compound_head() is implemented with assumption that there would be race condition when checking tail flag. This assumption is only true when we try to access arbitrary positioned struct page. The situation that virt_to_head_page() is called is different case. We call virt_to_head_page() only in the range of allocated pages, so there is no race condition on tail flag. In this case, we don't need to handle race condition and we can reduce overhead slightly. This patch implements compound_head_fast() which is similar with compound_head() except tail flag race handling. And then, virt_to_head_page() uses this optimized function to improve performance. I saw 1.8% win in a fast-path loop over kmem_cache_alloc/free, (14.063 ns -> 13.810 ns) if target object is on tail page. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10mm/slub: optimize alloc/free fastpath by removing preemption on/offJoonsoo Kim1-12/+23
We had to insert a preempt enable/disable in the fastpath a while ago in order to guarantee that tid and kmem_cache_cpu are retrieved on the same cpu. It is the problem only for CONFIG_PREEMPT in which scheduler can move the process to other cpu during retrieving data. Now, I reach the solution to remove preempt enable/disable in the fastpath. If tid is matched with kmem_cache_cpu's tid after tid and kmem_cache_cpu are retrieved by separate this_cpu operation, it means that they are retrieved on the same cpu. If not matched, we just have to retry it. With this guarantee, preemption enable/disable isn't need at all even if CONFIG_PREEMPT, so this patch removes it. I saw roughly 5% win in a fast-path loop over kmem_cache_alloc/free in CONFIG_PREEMPT. (14.821 ns -> 14.049 ns) Below is the result of Christoph's slab_test reported by Jesper Dangaard Brouer. * Before Single thread testing ===================== 1. Kmalloc: Repeatedly allocate then free test 10000 times kmalloc(8) -> 49 cycles kfree -> 62 cycles 10000 times kmalloc(16) -> 48 cycles kfree -> 64 cycles 10000 times kmalloc(32) -> 53 cycles kfree -> 70 cycles 10000 times kmalloc(64) -> 64 cycles kfree -> 77 cycles 10000 times kmalloc(128) -> 74 cycles kfree -> 84 cycles 10000 times kmalloc(256) -> 84 cycles kfree -> 114 cycles 10000 times kmalloc(512) -> 83 cycles kfree -> 116 cycles 10000 times kmalloc(1024) -> 81 cycles kfree -> 120 cycles 10000 times kmalloc(2048) -> 104 cycles kfree -> 136 cycles 10000 times kmalloc(4096) -> 142 cycles kfree -> 165 cycles 10000 times kmalloc(8192) -> 238 cycles kfree -> 226 cycles 10000 times kmalloc(16384) -> 403 cycles kfree -> 264 cycles 2. Kmalloc: alloc/free test 10000 times kmalloc(8)/kfree -> 68 cycles 10000 times kmalloc(16)/kfree -> 68 cycles 10000 times kmalloc(32)/kfree -> 69 cycles 10000 times kmalloc(64)/kfree -> 68 cycles 10000 times kmalloc(128)/kfree -> 68 cycles 10000 times kmalloc(256)/kfree -> 68 cycles 10000 times kmalloc(512)/kfree -> 74 cycles 10000 times kmalloc(1024)/kfree -> 75 cycles 10000 times kmalloc(2048)/kfree -> 74 cycles 10000 times kmalloc(4096)/kfree -> 74 cycles 10000 times kmalloc(8192)/kfree -> 75 cycles 10000 times kmalloc(16384)/kfree -> 510 cycles * After Single thread testing ===================== 1. Kmalloc: Repeatedly allocate then free test 10000 times kmalloc(8) -> 46 cycles kfree -> 61 cycles 10000 times kmalloc(16) -> 46 cycles kfree -> 63 cycles 10000 times kmalloc(32) -> 49 cycles kfree -> 69 cycles 10000 times kmalloc(64) -> 57 cycles kfree -> 76 cycles 10000 times kmalloc(128) -> 66 cycles kfree -> 83 cycles 10000 times kmalloc(256) -> 84 cycles kfree -> 110 cycles 10000 times kmalloc(512) -> 77 cycles kfree -> 114 cycles 10000 times kmalloc(1024) -> 80 cycles kfree -> 116 cycles 10000 times kmalloc(2048) -> 102 cycles kfree -> 131 cycles 10000 times kmalloc(4096) -> 135 cycles kfree -> 163 cycles 10000 times kmalloc(8192) -> 238 cycles kfree -> 218 cycles 10000 times kmalloc(16384) -> 399 cycles kfree -> 262 cycles 2. Kmalloc: alloc/free test 10000 times kmalloc(8)/kfree -> 65 cycles 10000 times kmalloc(16)/kfree -> 66 cycles 10000 times kmalloc(32)/kfree -> 65 cycles 10000 times kmalloc(64)/kfree -> 66 cycles 10000 times kmalloc(128)/kfree -> 66 cycles 10000 times kmalloc(256)/kfree -> 71 cycles 10000 times kmalloc(512)/kfree -> 72 cycles 10000 times kmalloc(1024)/kfree -> 71 cycles 10000 times kmalloc(2048)/kfree -> 71 cycles 10000 times kmalloc(4096)/kfree -> 71 cycles 10000 times kmalloc(8192)/kfree -> 65 cycles 10000 times kmalloc(16384)/kfree -> 511 cycles Most of the results are better than before. Note that this change slightly worses performance in !CONFIG_PREEMPT, roughly 0.3%. Implementing each case separately would help performance, but, since it's so marginal, I didn't do that. This would help maintanance since we have same code for all cases. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Christoph Lameter <cl@linux.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10fsioctl.c: make generic_block_fiemap() signal-tolerantDmitry Monakhov2-1/+7
__generic_block_fiemap may spin very long time for large sparse files. Without this patch an unprivileged user may abuse system resources simply by spawning a vast number of unkilable busyloops (works on ext2/ext3): truncate --size 1T test for ((i=0;i<1024;i++)) do filefrag test > /dev/null & done Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10o2dlm: fix NULL pointer dereference in o2dlm_blocking_ast_wrapperSrinivas Eeda1-1/+5
A tiny race between BAST and unlock message causes the NULL dereference. A node sends an unlock request to master and receives a response. Before processing the response it receives a BAST from the master. Since both requests are processed by different threads it creates a race. While the BAST is being processed, lock can get freed by unlock code. This patch makes bast to return immediately if lock is found but unlock is pending. The code should handle this race. We also have to fix master node to skip sending BAST after receiving unlock message. Below is the crash stack BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 IP: o2dlm_blocking_ast_wrapper+0xd/0x16 dlm_do_local_bast+0x8e/0x97 [ocfs2_dlm] dlm_proxy_ast_handler+0x838/0x87e [ocfs2_dlm] o2net_process_message+0x395/0x5b8 [ocfs2_nodemanager] o2net_rx_until_empty+0x762/0x90d [ocfs2_nodemanager] worker_thread+0x14d/0x1ed [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: prune the dcache before deleting the dentry of directoryalex chen1-0/+3
In ocfs2_dentry_convert_worker, we should prune the dcache before deleting the dentry of directory, otherwise, in the following cases the inode of directory will still remain in orphan directory until the device being umounted. Mount point: /mnt/ocfs2 Node A Node B mkdir /mnt/ocfs2/testdir ocfs2_mkdir ->ocfs2_mknod ->ocfs2_dentry_attach_lock ->ocfs2_dentry_lock(dentry, 0) ... ... touch /mnt/ocfs2/testdir/testfile unlink /mnt/test/testdir/testfile rmdir /mnt/ocfs2/testdir ocfs2_unlink ->ocfs2_remote_dentry_delete ->ocfs2_dentry_lock(dentry, 1) ... ... ... ... ocfs2_downconvert_thread ->ocfs2_unblock_lock ->ocfs2_dentry_convert_worker ->ocfs2_find_local_alias ->dget_dlock ->d_delete Here the dentry can not be released because the children's dentry is negative but still exist. Finally, this inode will still remain in orphan directory until its children are destroyed. So before deleting dentry of directory, we should prune the dcache to remove unused children of the parent dentry by shrink_dcache_parent(). Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: joyce.xue <xuejiufei@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: make resv_lock spinlock staticFabian Frederick1-1/+1
resv_lock is only used in reservations.c Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: remove unreachable code in __ocfs2_recovery_thread()Daeseok Youn1-1/+0
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: removes mlog_errno() call twice in ocfs2_find_dir_space_el()Daeseok Youn1-6/+3
mlog_errno() is called twice when some functions are failed. Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: remove unreachable codeDaeseok Youn1-1/+0
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: o2net: silence uninitialized variable warningDan Carpenter1-1/+2
Smatch complains that, if o2net_tx_can_proceed() returns false, then "sc" and "ret" are uninialized or maybe we are re-using the data from previous iteration. I do not know if we can hit this bug in real life but checking the return value is harmless and we may as well silence the static checker warning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: remove pointless assignment from ocfs2_calc_refcount_meta_credits()Jan Kara1-2/+0
The assigned value is never used. Coverity-id 1226847. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: add a mount option journal_async_commit on ocfs2 filesystemalex chen3-0/+23
Add a mount option to support JBD2 feature: JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT. When this feature is opened, journal commit block can be written to disk without waiting for descriptor blocks, which can improve journal commit performance. This option will enable 'journal_checksum' internally. Using the fs_mark benchmark, using journal_async_commit shows a 50% improvement, the files per second go up from 215.2 to 317.5. test script: fs_mark -d /mnt/ocfs2/ -s 10240 -n 1000 default: FSUse% Count Size Files/sec App Overhead 0 1000 10240 215.2 17878 with journal_async_commit option: FSUse% Count Size Files/sec App Overhead 0 1000 10240 317.5 17881 Signed-off-by: Alex Chen <alex.chen@huawei.com> Signed-off-by: Weiwei Wang <wangww631@huawei.comm> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: fix journal commit deadlock in ocfs2_convert_inline_data_to_extentsalex chen1-9/+9
Similar to ocfs2_write_end_nolock() which is metioned at commit 136f49b91710 ("ocfs2: fix journal commit deadlock"), we should unlock pages before ocfs2_commit_trans() in ocfs2_convert_inline_data_to_extents. Otherwise, it will cause a deadlock with journal commit threads. Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: dlm: dlmdomain: remove unused functionRickard Strandqvist2-15/+0
Remove dlm_joined() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: quota_local: remove unused functionRickard Strandqvist1-6/+0
Remove ol_dqblk_file_block() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: xattr: remove unused functionRickard Strandqvist1-10/+0
Remove ocfs2_xattr_bucket_get_val() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: fix snprintf format specifier in dlmdebug.calex chen1-2/+2
Use snprintf format specifier "%lu" instead of "%ld" for argument of type 'unsigned long'. Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: fix wrong commentJunxiao Bi1-6/+6
O2NET_CONN_IDLE_DELAY is not defined, connection attempts will not be canceled due to timeout. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: fix uninitialized variable accessJunxiao Bi1-1/+1
Variable "why" is not yet initialized at line 615, fix it. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: remove unnecessary else in ocfs2_set_acl()Fabian Frederick1-8/+6
else is unnecessary after return. Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2/dlm: add missing dlm_lock_put() when recovery master downXue jiufei1-0/+7
When the recovery master is down, the owner of $RECOVERY calls dlm_do_local_recovery_cleanup() to prune any $RECOVERY entries for dead nodes. The lock is in the granted list and the refcount must be 2. We should put twice to remove this lock. Otherwise, it will lead to a memory leak. Signed-off-by: joyce.xue <xuejiufei@huawei.com> Reported-by: yangwenfang <vicky.yangwenfang@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10sh: eliminate unused irq_reg_{readl,writel} accessorsKevin Cernekee2-6/+0
Defining these macros way down in arch/sh/.../irq.c doesn't cause kernel/irq/generic-chip.c to use them. As far as I can tell this code has no effect. Fixes: 332fd7c4fef5f3b1 ("genirq: Generic chip: Change irq_reg_{readl,writel} arguments") Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> (cpp/asm comparison) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10sh: build superh without CONFIG_EXPERTRob Landley1-1/+1
What sh4 actually wants is HAVE_PATA_PLATFORM, so select that instead. Signed-off-by: Rob Landley <rob@landley.net> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10fsnotify: fix handling of renames in auditJan Kara1-2/+4
Commit e9fd702a58c4 ("audit: convert audit watches to use fsnotify instead of inotify") broke handling of renames in audit. Audit code wants to update inode number of an inode corresponding to watched name in a directory. When something gets renamed into a directory to a watched name, inotify previously passed moved inode to audit code however new fsnotify code passes directory inode where the change happened. That confuses audit and it starts watching parent directory instead of a file in a directory. This can be observed for example by doing: cd /tmp touch foo bar auditctl -w /tmp/foo touch foo mv bar foo touch foo In audit log we see events like: type=CONFIG_CHANGE msg=audit(1423563584.155:90): auid=1000 ses=2 op="updated rules" path="/tmp/foo" key=(null) list=4 res=1 ... type=PATH msg=audit(1423563584.155:91): item=2 name="bar" inode=1046884 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=DELETE type=PATH msg=audit(1423563584.155:91): item=3 name="foo" inode=1046842 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=DELETE type=PATH msg=audit(1423563584.155:91): item=4 name="foo" inode=1046884 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=CREATE ... and that's it - we see event for the first touch after creating the audit rule, we see events for rename but we don't see any event for the last touch. However we start seeing events for unrelated stuff happening in /tmp. Fix the problem by passing moved inode as data in the FS_MOVED_FROM and FS_MOVED_TO events instead of the directory where the change happens. This doesn't introduce any new problems because noone besides audit_watch.c cares about the passed value: fs/notify/fanotify/fanotify.c cares only about FSNOTIFY_EVENT_PATH events. fs/notify/dnotify/dnotify.c doesn't care about passed 'data' value at all. fs/notify/inotify/inotify_fsnotify.c uses 'data' only for FSNOTIFY_EVENT_PATH. kernel/audit_tree.c doesn't care about passed 'data' at all. kernel/audit_watch.c expects moved inode as 'data'. Fixes: e9fd702a58c49db ("audit: convert audit watches to use fsnotify instead of inotify") Signed-off-by: Jan Kara <jack@suse.cz> Cc: Paul Moore <paul@paul-moore.com> Cc: Eric Paris <eparis@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10inotify: update documentation to reflect code changesZhang Zhen1-194/+3
The inotify interface has changed a lot. The user interface was too old, and the kernel interface was removed by Eric Paris in commit: 2dfc1ca inotify: remove inotify in kernel interface. Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com> Cc: Wang Kai <morgan.wang@huawei.com> Cc: Eric Paris <eparis@parisplace.org> Cc: Robert Love <robert.w.love@intel.com> Cc: John McCutchan <john@johnmccutchan.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10fanotify: don't set FAN_ONDIR implicitly on a marks ignored maskLino Sanfilippo2-9/+18
Currently FAN_ONDIR is always set on a mark's ignored mask when the event mask is extended without FAN_MARK_ONDIR being set. This may result in events for directories being ignored unexpectedly for call sequences like fanotify_mark(fd, FAN_MARK_ADD, FAN_OPEN | FAN_ONDIR , AT_FDCWD, "dir"); fanotify_mark(fd, FAN_MARK_ADD, FAN_CLOSE, AT_FDCWD, "dir"); Also FAN_MARK_ONDIR is only honored when adding events to a mark's mask, but not for event removal. Fix both issues by not setting FAN_ONDIR implicitly on the ignore mask any more. Instead treat FAN_ONDIR as any other event flag and require FAN_MARK_ONDIR to be set by the user for both event mask and ignore mask. Furthermore take FAN_MARK_ONDIR into account when set for event removal. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10fanotify: don't recalculate a marks mask if only the ignored mask changedLino Sanfilippo1-3/+4
If removing bits from a mark's ignored mask, the concerning inodes/vfsmounts mask is not affected. So don't recalculate it. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10fanotify: only destroy mark when both mask and ignored_mask are clearedLino Sanfilippo1-2/+1
In fanotify_mark_remove_from_mask() a mark is destroyed if only one of both bitmasks (mask or ignored_mask) of a mark is cleared. However the other mask may still be set and contain information that should not be lost. So only destroy a mark if both masks are cleared. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10hugetlb, x86: register 1G page size if we can allocate them at runtimeKirill A. Shutemov1-0/+11
After commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation at runtime") we can allocate 1G pages at runtime if CMA is enabled. Let's register 1G pages into hugetlb even if the user hasn't requested them explicitly at boot time with hugepagesz=1G. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10microblaze: Remove *.dtb files in make cleanMichal Simek2-4/+1
dts/Makefile is called only for simpleImage target which is causing that *.dtb are not removed. This patch fix it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-10GFS2: Fix crash during ACL deletion in acl max entry check in gfs2_set_acl()Andrew Elble1-1/+1
Fixes: e01580bf9e ("gfs2: use generic posix ACL infrastructure") Reported-by: Eric Meddaugh <etmsys@rit.edu> Tested-by: Eric Meddaugh <etmsys@rit.edu> Signed-off-by: Andrew Elble <aweits@rit.edu> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2015-02-09tools/power turbostat: relax dependency on APERF_MSRLen Brown2-45/+68
While turbostat is significantly less useful on systems with no APERF_MSR, it seems more friendly to run on such systems and report what we can, rather than refusing to run. Update man page to reflect recent changes. Signed-off-by: Len Brown <len.brown@intel.com>
2015-02-09tools/power turbostat: relax dependency on invariant TSCLen Brown1-39/+75
Turbostat can be useful on systems that do not support invariant TSC, so allow it to run on those systgems. All arithmetic in turbostat using the TSC value is per-processsor, so it does not depend on the TSC values being in sync acrosss processors. Turbostat uses gettimeofday() for the measurement interval rather than using the TSC directly, so that key metric is also immune from variable TSC. Turbostat prints a TSC sanity check column: TSC_MHz = TSC_delta/interval If this column is constant and is close to the processor base frequency, then the TSC is behaving properly. The other key turbostat columns are calculated this way: Avg_Mhz = APERF_delta/interval %Busy = MPERF_delta/TSC_delta Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/interval Tested on Core2 and Core2-Xeon, and so this patch includes a few other changes to remove the assumption that target systems are Nehalem and newer. Signed-off-by: Len Brown <len.brown@intel.com>
2015-02-09Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resourcesRafael J. Wysocki1-0/+3
modified: drivers/of/of_pci.c This fixes a build failure after merging the 'acpi-resources' branch with the PCI tree caused by bad interactions between that branch and the only commit in 'pci/host-generic'. Also that commit contains a bug which can be fixed by removing one line of code, so do that too. Link: http://marc.info/?l=linux-kernel&m=142344882101429&w=2 Link: http://marc.info/?l=linux-next&m=142346304003932&w=2 Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-10xfs: only trace buffer items if they existDave Chinner1-2/+3
The commit 2d3d0c5 ("xfs: lobotomise xfs_trans_read_buf_map()") left a landmine in the tracing code: trace_xfs_trans_buf_read() is now call on all buffers that are read through this interface rather than just buffers in transactions. For buffers outside transaction context, bp->b_fspriv is null, and so the buf log item tracing functions cannot be called. This causes a NULL pointer dereference in the trace_xfs_trans_buf_read() function when tracing is turned on. cc: <stable@vger.kernel.org> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-09tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONSLen Brown2-0/+130
The Processor generation code-named Haswell added MSR_{CORE | GFX | RING}_PERF_LIMIT_REASONS to explain when and how the processor limits frequency. turbostat -v will now decode these bits. Each MSR has an "Active" set of bits which describe current conditions, and a "Logged" set of bits, which describe what has happened since last cleared. Turbostat currently doesn't clear the log bits. Signed-off-by: Len Brown <len.brown@intel.com>
2015-02-09tools/power turbostat: relax dependency on root permissionLen Brown1-12/+41
For turbostat to run as non-root, it needs to permissions: 1. read access to /dev/cpu/*/msr via standard user/group/world file permissions 2. CAP_SYS_RAWIO eg. # setcap cap_sys_rawio=ep turbostat Yes, running as root still works. Signed-off-by: Len Brown <len.brown@intel.com>
2015-02-09random: Fix fast_mix() functionGeorge Spelvin1-4/+4
There was a bad typo in commit 43759d4f429c ("random: use an improved fast_mix() function") and I didn't notice because it "looked right", so I saw what I expected to see when I reviewed it. Only months later did I look and notice it's not the Threefish-inspired mix function that I had designed and optimized. Mea Culpa. Each input bit still has a chance to affect each output bit, and the fast pool is spilled *long* before it fills, so it's not a total disaster, but it's definitely not the intended great improvement. I'm still working on finding better rotation constants. These are good enough, but since it's unrolled twice, it's possible to get better mixing for free by using eight different constants rather than repeating the same four. Signed-off-by: George Spelvin <linux@horizon.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-09EDAC: Add repo URLs to MAINTAINERSBorislav Petkov1-0/+2
... so that people can base new work ontop. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2015-02-08Linux 3.19Linus Torvalds1-1/+1
2015-02-09nios2: fix unhandled signalsChung-Ling Tang1-3/+5
Follow other architectures for user fault handling. Signed-off-by: Chung-Ling Tang <cltang@codesourcery.com> Acked-by: Ley Foon Tan <lftan@altera.com>
2015-02-08ACPI / video: Add disable_native_backlight quirk for Samsung 510RHans de Goede1-0/+9
Backlight control through the native intel interface does not work properly on the Samsung 510R, where as using the acpi_video interface does work, add a quirk for this. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1186097 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-08ACPI / PM: Remove unneeded nested #ifdefAndreas Ruprecht1-2/+0
In commit 5de21bb998b8 ("ACPI / PM: Drop CONFIG_PM_RUNTIME from the ACPI core"), all occurrences of CONFIG_PM_RUNTIME were replaced with CONFIG_PM. This created the following structure of #ifdef blocks in the code: [...] #ifdef CONFIG_PM #ifdef CONFIG_PM /* always on / undead */ #ifdef CONFIG_PM_SLEEP [...] #endif #endif [...] #endif This patch removes the inner "#ifdef CONFIG_PM" block as it will always be enabled when the outer block is enabled. This inconsistency was found using the undertaker-checkpatch tool. Signed-off-by: Andreas Ruprecht <rupran@einserver.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.