aboutsummaryrefslogtreecommitdiffstats
path: root/fs/romfs (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2010-04-20x86: correctly wire up the newuname system callChristoph Hellwig1-1/+1
Before commit e28cbf22933d0c0ccaf3c4c27a1a263b41f73859 ("improve sys_newuname() for compat architectures") 64-bit x86 had a private implementation of sys_uname which was just called sys_uname, which other architectures used for the old uname. Due to some merge issues with the uname refactoring patches we ended up calling the old uname version for both the old and new system call slots, which lead to the domainname filed never be set which caused failures with libnss_nis. Reported-and-tested-by: Andy Isaacson <adi@hexapodia.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-20sparc64: Fix hardirq tracing in trap return path.David S. Miller1-1/+11
We can overflow the hardirq stack if we set the %pil here so early, just let the normal control flow do it. This is fine as we are allowed to do the actual IRQ enable at any point after we call trace_hardirqs_on. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20drm: delay vblank cleanup until after driver unloadJesse Barnes1-2/+2
Drivers may use vblank calls now (e.g. drm_vblank_off) in their unload paths, so don't clean up the vblank related structures until after driver unload. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Kristian Høgsberg <krh@bitplanet.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19Linux 2.6.34-rc5Linus Torvalds1-2/+2
2010-04-19rmap: add exclusively owned pages to the newest anon_vmaRik van Riel1-11/+16
The recent anon_vma fixes cause many anonymous pages to end up in the parent process anon_vma, even when the page is exclusively owned by the current process. Adding exclusively owned anonymous pages to the top anon_vma reduces rmap scanning overhead, especially in workloads with forking servers. This patch adds a parameter to __page_set_anon_rmap that can be used to indicate whether or not the added page is exclusively owned by the current process. Pages added through page_add_new_anon_rmap are exclusively owned by the current process, and can be added to the top anon_vma. Pages added through page_add_anon_rmap can be either shared or exclusively owned, so we do the conservative thing and add it to the oldest anon_vma. A next step would be to add the exclusive parameter to page_add_anon_rmap, to be used from functions where we do know for sure whether a page is exclusively owned. Signed-off-by: Rik van Riel <riel@redhat.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Lightly-tested-by: Borislav Petkov <bp@alien8.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> [ Edited to look nicer - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-19sparc64: Use correct pt_regs in decode_access_size() error paths.David S. Miller1-3/+3
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19eCryptfs: Turn lower lookup error messages into debug messagesTyler Hicks1-6/+6
Vaugue warnings about ENAMETOOLONG errors when looking up an encrypted file name have caused many users to become concerned about their data. Since this is a rather harmless condition, I'm moving this warning to only be printed when the ecryptfs_verbosity module param is 1. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2010-04-19eCryptfs: Copy lower directory inode times and size on linkTyler Hicks1-2/+2
The timestamps and size of a lower inode involved in a link() call was being copied to the upper parent inode. Instead, we should be copying lower parent inode's timestamps and size to the upper parent inode. I discovered this bug using the POSIX test suite at Tuxera. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2010-04-19ecryptfs: fix use with tmpfs by removing d_drop from ecryptfs_destroy_inodeJeff Mahoney1-1/+0
Since tmpfs has no persistent storage, it pins all its dentries in memory so they have d_count=1 when other file systems would have d_count=0. ->lookup is only used to create new dentries. If the caller doesn't instantiate it, it's freed immediately at dput(). ->readdir reads directly from the dcache and depends on the dentries being hashed. When an ecryptfs mount is mounted, it associates the lower file and dentry with the ecryptfs files as they're accessed. When it's umounted and destroys all the in-memory ecryptfs inodes, it fput's the lower_files and d_drop's the lower_dentries. Commit 4981e081 added this and a d_delete in 2008 and several months later commit caeeeecf removed the d_delete. I believe the d_drop() needs to be removed as well. The d_drop effectively hides any file that has been accessed via ecryptfs from the underlying tmpfs since it depends on it being hashed for it to be accessible. I've removed the d_drop on my development node and see no ill effects with basic testing on both tmpfs and persistent storage. As a side effect, after ecryptfs d_drops the dentries on tmpfs, tmpfs BUGs on umount. This is due to the dentries being unhashed. tmpfs->kill_sb is kill_litter_super which calls d_genocide to drop the reference pinning the dentry. It skips unhashed and negative dentries, but shrink_dcache_for_umount_subtree doesn't. Since those dentries still have an elevated d_count, we get a BUG(). This patch removes the d_drop call and fixes both issues. This issue was reported at: https://bugzilla.novell.com/show_bug.cgi?id=567887 Reported-by: Árpád Bíró <biroa@demasz.hu> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Cc: Dustin Kirkland <kirkland@canonical.com> Cc: stable@kernel.org Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2010-04-19ecryptfs: fix error code for missing xattrs in lower fsChristian Pulvermacher1-4/+4
If the lower file system driver has extended attributes disabled, ecryptfs' own access functions return -ENOSYS instead of -EOPNOTSUPP. This breaks execution of programs in the ecryptfs mount, since the kernel expects the latter error when checking for security capabilities in xattrs. Signed-off-by: Christian Pulvermacher <pulvermacher@gmx.de> Cc: stable@kernel.org Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2010-04-19eCryptfs: Decrypt symlink target for stat sizeTyler Hicks1-48/+52
Create a getattr handler for eCryptfs symlinks that is capable of reading the lower target and decrypting its path. Prior to this patch, a stat's st_size field would represent the strlen of the encrypted path, while readlink() would return the strlen of the decrypted path. This could lead to confusion in some userspace applications, since the two values should be equal. https://bugs.launchpad.net/bugs/524919 Reported-by: Loïc Minier <loic.minier@canonical.com> Cc: stable@kernel.org Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2010-04-19Fix ISDN/Gigaset build failureLinus Torvalds1-0/+1
Commit b91ecb00 ("gigaset: include cleanup cleanup") removed an implicit sched.h inclusion that came in via slab.h, and caused various compile problems as a result. This should fix it. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-19pcmcia: fix error handling in cm4000_cs.cDan Carpenter1-3/+5
In the original code we used -ENODEV as the number of bytes to copy_to_user() and we didn't release the locks. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-19drm/radeon/kms: add FireMV 2400 PCI ID.Dave Airlie1-0/+1
This is an M24/X600 chip. From RH# 581927 cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19sparc64: Fix PREEMPT_ACTIVE value.David S. Miller1-1/+1
It currently overlaps the NMI bit. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19rcu: Make RCU lockdep check the lockdep_recursion variablePaul E. McKenney2-4/+8
The lockdep facility temporarily disables lockdep checking by incrementing the current->lockdep_recursion variable. Such disabling happens in NMIs and in other situations where lockdep might expect to recurse on itself. This patch therefore checks current->lockdep_recursion, disabling RCU lockdep splats when this variable is non-zero. In addition, this patch removes the "likely()", as suggested by Lai Jiangshan. Reported-by: Frederic Weisbecker <fweisbec@gmail.com> Reported-by: David Miller <davem@davemloft.net> Tested-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com Cc: eric.dumazet@gmail.com LKML-Reference: <20100415195039.GA22623@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-19drm/radeon/kms: allow R500 regs VAP_ALT_NUM_VERTICES and VAP_INDEX_OFFSETMarek Olšák5-6/+20
[airlied: fix V_A_N_V to not be safe and fix check to make sure only r500 - bump userspace version] Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19drivers/gpu/radeon: Add MSPOS regs to safe list.Corbin Simpson4-0/+8
Permits MSAA and D3D-style rasterization. [airlied: add rs600] Signed-off-by: Corbin Simpson <MostAwesomeDude@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19drm/radeon/kms: disable the tv encoder when tv/cv is not in useAlex Deucher1-2/+6
Switching between TV and VGA caused VGA to break on some systems since the TV encoder was left enabled when VGA was used. fixes fdo bug 25520. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19drm/radeon/kms: adjust pll settings for tvAlex Deucher1-0/+4
May fix fdo bug 26582. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19drm/radeon/kms: fix tv dac conflict resolverAlex Deucher1-0/+5
On systems with the tv dac shared between DVI and TV, we can only use the dac for one of the connectors. However, when using a digital monitor on the DVI port, you can use the dac for the TV connector just fine. Check the use_digital status when resolving the conflict. Fixes fdo bug 27649, possibly others. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19drm/radeon/kms/evergreen: don't enable hdmi audio stuffAlex Deucher2-1/+10
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19drm/radeon/kms/atom: fix dual-link DVI on DCE3.2/4.0Alex Deucher1-0/+4
Got broken during the evergreen merge. Fixes fdo bug 27001. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19drm/radeon/kms: fix rs600 tlb flushJerome Glisse1-1/+1
Typo in in flush leaded to no flush of the RS600 tlb which ultimately leaded to massive system ram corruption, with this patch everythings seems to work properly. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19drm/radeon/kms: print GPU family and device id when loadingJerome Glisse2-2/+54
This will help figuring out GPU when looking at bugs log. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-18gigaset: include cleanup cleanupTilman Schmidt9-20/+1
Commit 5a0e3ad causes slab.h to be included twice in many of the Gigaset driver's source files, first via the common include file gigaset.h and then a second time directly. Drop the spares, and use the opportunity to clean up a few more similar cases. Impact: cleanup, no functional change Signed-off-by: Tilman Schmidt <tilman@imap.cc> CC: Tejun Heo <tj@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-17drivers/pcmcia: Add missing local_irq_restoreJulia Lawall1-1/+3
Use local_irq_restore in this error-handling case just like in the one just below. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E1; identifier f; @@ f (...) { <+... * local_irq_save (E1,...); ... when != E1 * return ...; ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-17serial_cs: MD55x support (PCMCIA GPRS/EDGE modem) (kernel 2.6.33)Timur Maximov1-0/+9
Many PCMCIA GPRS modems like: Onda Edge N100E, Novaway PC98 (OEM SPC98Z), Rovermate Edgus Adaptmate-039 and others have same construction and identification: lspcmcia -vvv Product Name: Generic Modem: MD55x 1.00 Serial number: xxxxx-xxx Identification: manf_id: 0x015d card_id: 0x4c45 function: 2 (serial) prod_id(1): "Generic" (0xc49e4731) prod_id(2): "Modem: MD55x" (0x8913b110) prod_id(3): "1.00" (0x83dbf271) prod_id(4): "Serial number: xxxxx-xxx" (0x73ee9514) Serial connection to GSM module based on Elan VPU16551 PCMCIA UART with datasheet recommeded 14.7456MHz crystal oscillator. By default serial_cs set UART clock == 1843200 Hz For correct work need set clock 14745600 Hz. This quirk already present in driver, only need add device in quirk list. Signed-off-by: Timur Maximov <xcom.org@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-17pcmcia: avoid late calls to pccard_validate_cisDominik Brodowski1-2/+7
pccard_validate_cis() nowadays destroys the CIS cache. Therefore, calling it after card setup should be avoided. We can't control the deprecated PCMCIA ioctl (which is only used on ARM nowadays), but we can avoid -- and report -- any other calls. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-16packet : remove init_net restrictionDaniel Lezcano1-2/+0
The af_packet protocol is used by Perl to do ioctls as reported by Stephane Riviere: "Net::RawIP relies on SIOCGIFADDR et SIOCGIFHWADDR to get the IP and MAC addresses of the network interface." But in a new network namespace these ioctl fail because it is disabled for a namespace different from the init_net_ns. These two lines should not be there as af_inet and af_packet are namespace aware since a long time now. I suppose we forget to remove these lines because we sent the af_packet first, before af_inet was supported. Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr> Reported-by: Stephane Riviere <stephane.riviere@regis-dgac.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16WAN: flush tx_queue in hdlc_ppp to prevent panic on rmmod hw_driver.Krzysztof Halasa1-0/+6
tx_queue is used as a temporary queue when not allowed to queue skb directly to the hw device driver (which may sleep). Most paths flush it before returning, but ppp_start() currently cannot. Make sure we don't leave skbs pointing to a non-existent device. Thanks to Michael Barkowski for reporting this problem. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16ACPI: EC: Limit burst to 64 bitsAlexey Starikovskiy1-6/+11
access_bit_width field is u8 in ACPICA, thus 256 value written to it becomes 0, causing divide by zero later. Proper fix would be to remove access_bit_width at all, just because we already have access_byte_width, which is access_bit_width / 8. Limit access width to 64 bit for now. https://bugzilla.kernel.org/show_bug.cgi?id=15749 fixes regression caused by the fix for: https://bugzilla.kernel.org/show_bug.cgi?id=14667 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-16xfs: don't warn on EAGAIN in inode reclaimDave Chinner1-2/+2
Any inode reclaim flush that returns EAGAIN will result in the inode reclaim being attempted again later. There is no need to issue a warning into the logs about this situation. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-04-16xfs: ensure that sync updates the log tail correctlyDave Chinner1-12/+26
Updates to the VFS layer removed an extra ->sync_fs call into the filesystem during the sync process (from the quota code). Unfortunately the sync code was unknowingly relying on this call to make sure metadata buffers were flushed via a xfs_buftarg_flush() call to move the tail of the log forward in memory before the final transactions of the sync process were issued. As a result, the old code would write a very recent log tail value to the log by the end of the sync process, and so a subsequent crash would leave nothing for log recovery to do. Hence in qa test 182, log recovery only replayed a small handle for inode fsync transactions in this case. However, with the removal of the extra ->sync_fs call, the log tail was now not moved forward with the inode fsync transactions near the end of the sync procese the first (and only) buftarg flush occurred after these transactions went to disk. The result is that log recovery now sees a large number of transactions for metadata that is already on disk. This usually isn't a problem, but when the transactions include inode chunk allocation, the inode create transactions and all subsequent changes are replayed as we cannt rely on what is on disk is valid. As a result, if the inode was written and contains unlogged changes, the unlogged changes are lost, thereby violating sync semantics. The fix is to always issue a transaction after the buftarg flush occurs is the log iѕ not idle or covered. This results in a dummy transaction being written that contains the up-to-date log tail value, which will be very recent. Indeed, it will be at least as recent as the old code would have left on disk, so log recovery will behave exactly as it used to in this situation. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-04-16[WATCHDOG] max63xx driver depends on ioremap()Geert Uytterhoeven1-1/+1
Correct fix for the "ioremap() causes build failure on S390" should have been a dependancy on HAS_IOMEM. So we add this dependancy also (and leave the driver in the ARM section for now). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-04-16[WATCHDOG] max63xx: be careful when disabling the watchdogMarc Zyngier1-1/+6
When shutting down the watchdog timer, special care must be taken not to overwrite other bits in the register, as it may be shared with other peripherals. For example, on the Arcom Vulcan, the register is shared between the watchdog and the PCI reset line... Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-04-16[WATCHDOG] fixed book E watchdog period register mask.Luuk Paulussen1-1/+1
A previous fix changed the WDTP function to use the period directly, rather than subtracting from 63. However the mask generation was not changed, so the mask was coming out as 0. This patch fixes it. Signed-off-by: Luuk Paulussen <luuk.paulussen@alliedtelesis.co.nz> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-04-16[WATCHDOG] omap4: Fix WDT KconfigSantosh Shilimkar1-3/+3
This patch allows Watchdog timer to be selected for OMAP4 by fixing Kconfig entry Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-04-15ip: Fix ip_dev_loopback_xmit()Eric Dumazet2-2/+2
Eric Paris got following trace with a linux-next kernel [ 14.203970] BUG: using smp_processor_id() in preemptible [00000000] code: avahi-daemon/2093 [ 14.204025] caller is netif_rx+0xfa/0x110 [ 14.204035] Call Trace: [ 14.204064] [<ffffffff81278fe5>] debug_smp_processor_id+0x105/0x110 [ 14.204070] [<ffffffff8142163a>] netif_rx+0xfa/0x110 [ 14.204090] [<ffffffff8145b631>] ip_dev_loopback_xmit+0x71/0xa0 [ 14.204095] [<ffffffff8145b892>] ip_mc_output+0x192/0x2c0 [ 14.204099] [<ffffffff8145d610>] ip_local_out+0x20/0x30 [ 14.204105] [<ffffffff8145d8ad>] ip_push_pending_frames+0x28d/0x3d0 [ 14.204119] [<ffffffff8147f1cc>] udp_push_pending_frames+0x14c/0x400 [ 14.204125] [<ffffffff814803fc>] udp_sendmsg+0x39c/0x790 [ 14.204137] [<ffffffff814891d5>] inet_sendmsg+0x45/0x80 [ 14.204149] [<ffffffff8140af91>] sock_sendmsg+0xf1/0x110 [ 14.204189] [<ffffffff8140dc6c>] sys_sendmsg+0x20c/0x380 [ 14.204233] [<ffffffff8100ad82>] system_call_fastpath+0x16/0x1b While current linux-2.6 kernel doesnt emit this warning, bug is latent and might cause unexpected failures. ip_dev_loopback_xmit() runs in process context, preemption enabled, so must call netif_rx_ni() instead of netif_rx(), to make sure that we process pending software interrupt. Same change for ip6_dev_loopback_xmit() Reported-by: Eric Paris <eparis@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-15Input: wacom - switch mode upon system resumePing Cheng1-5/+7
When Wacom devices wake up from a sleep, the switch mode command (wacom_query_tablet_data) is needed before wacom_open is called. wacom_query_tablet_data should not be executed inside wacom_open since wacom_open is called more than once during probe. wacom_retrieve_hid_descriptor is removed from wacom_resume due to the fact that the required descriptors are stored properly upon system resume. Reported-and-tested-by: Anton Anikin <Anton@Anikin.name> Signed-off-by: Ping Cheng <pingc@wacom.com> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-15pcmcia: fix ioport size calculation in rsrc_nonstaticDominik Brodowski1-1/+3
Size needs to be calculated after manipulating with the start value. Reported-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-16ASoC: imx-ssi: do not call hrtimer_disable in trigger functionSascha Hauer1-2/+8
Doing so causes a deadlock, so just signal the timer to stop using an atomic variable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-04-15firewire: cdev: change license of exported header files to MIT licenseStefan Richter2-17/+47
Among else, this allows projects like libdc1394 to carry copies of the ABI related header files without them or distributors having to worry about effects on the project's overall license terms. Switch to MIT license as suggested by Kristian. Also update the year in the copyright statement according to source history. Cc: Jay Fenlason <fenlason@redhat.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
2010-04-15net: dev_pick_tx() fixEric Dumazet1-2/+6
When dev_pick_tx() caches tx queue_index on a socket, we must check socket dst_entry matches skb one, or risk a crash later, as reported by Denys Fedorysychenko, if old packets are in flight during a route change, involving devices with different number of queues. Bug introduced by commit a4ee3ce3 (net: Use sk_tx_queue_mapping for connected sockets) Reported-by: Denys Fedorysychenko <nuclearcat@nuclearcat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-15ALSA: hda - Add position_fix quirk for Biostar moboTakashi Iwai1-0/+1
The Biostar mobo seems to give a wrong DMA position, resulting in stuttering or skipping sounds on 2.6.34. Since the commit 7b3a177b0d4f92b3431b8dca777313a07533a710, "ALSA: pcm_lib: fix "something must be really wrong" condition", makes the position check more strictly, the DMA position problem is revealed more clearly now. The fix is to use only LPIB for obtaining the position, i.e. passing position_fix=1. This patch adds a static quirk to achieve it as default. Reported-by: Frank Griffin <ftg@roadrunner.com> Cc: Eric Piel <Eric.Piel@tremplin-utc.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-15ALSA: hda - add a quirk for Clevo M570U laptopJoerg Schirottke1-0/+1
Added the matching model for Clevo laptop M570U. Signed-off-by: Joerg Schirottke <master@kanotix.com> Tested-by: Maximilian Gerhard <maxbox@directbox.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-15ASoC: imx-ssi: increase minimum periods to 4Sascha Hauer1-1/+1
Currently the notification of elapsed periods is not very exact. Increase minimum periods to 4 as suggested by Liam Girdwood. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-04-15SELinux: Reduce max avtab size to avoid page allocation failuresStephen Smalley1-1/+1
Reduce MAX_AVTAB_HASH_BITS so that the avtab allocation is an order 2 allocation rather than an order 4 allocation on x86_64. This addresses reports of page allocation failures: http://marc.info/?l=selinux&m=126757230625867&w=2 https://bugzilla.redhat.com/show_bug.cgi?id=570433 Reported-by: Russell Coker <russell@coker.com.au> Signed-off-by: Stephen D. Smalley <sds@tycho.nsa.gov> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2010-04-14fib: suppress lockdep-RCU false positive in FIB trie.Eric Dumazet1-1/+3
Followup of commit 634a4b20 Allow tnode_get_child_rcu() to be called either under rcu_read_lock() protection or with RTNL held. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-14m68k: Fix asm constraints for atomic_sub_and_test() and atomic_add_negative()Geert Uytterhoeven1-2/+6
Recently, we started seeing this on allmodconfig builds: CC mm/memcontrol.o {standard input}: Assembler messages: {standard input}:4076: Error: operands mismatch -- statement `subl 12(%fp),170(%a0)' ignored Correct the asm constraint, like done for m68knommu. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>