aboutsummaryrefslogtreecommitdiffstats
path: root/fs/ubifs/crypto.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-28fscrypt: introduce fscrypt_decrypt_block_inplace()Eric Biggers1-3/+4
Currently fscrypt_decrypt_page() does one of two logically distinct things depending on whether FS_CFLG_OWN_PAGES is set in the filesystem's fscrypt_operations: decrypt a pagecache page in-place, or decrypt a filesystem block in-place in any page. Currently these happen to share the same implementation, but this conflates the notion of blocks and pages. It also makes it so that all callers have to provide inode and lblk_num, when fscrypt could determine these itself for pagecache pages. Therefore, move the FS_CFLG_OWN_PAGES behavior into a new function fscrypt_decrypt_block_inplace(). This mirrors fscrypt_encrypt_block_inplace(). This is in preparation for allowing encryption on ext4 filesystems with blocksize != PAGE_SIZE. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-05-28fscrypt: introduce fscrypt_encrypt_block_inplace()Eric Biggers1-6/+6
fscrypt_encrypt_page() behaves very differently depending on whether the filesystem set FS_CFLG_OWN_PAGES in its fscrypt_operations. This makes the function difficult to understand and document. It also makes it so that all callers have to provide inode and lblk_num, when fscrypt could determine these itself for pagecache pages. Therefore, move the FS_CFLG_OWN_PAGES behavior into a new function fscrypt_encrypt_block_inplace(). This is in preparation for allowing encryption on ext4 filesystems with blocksize != PAGE_SIZE. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-08-15ubifs: Pass struct ubifs_info to ubifs_assert()Richard Weinberger1-2/+2
This allows us to have more context in ubifs_assert() and take different actions depending on the configuration. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-05-20fscrypt: make fscrypt_operations.max_namelen an integerEric Biggers1-9/+1
Now ->max_namelen() is only called to limit the filename length when adding NUL padding, and only for real filenames -- not symlink targets. It also didn't give the correct length for symlink targets anyway since it forgot to subtract 'sizeof(struct fscrypt_symlink_data)'. Thus, change ->max_namelen from a function to a simple 'unsigned int' that gives the filesystem's maximum filename length. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-11-14Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscryptLinus Torvalds1-1/+0
Pull fscrypt updates from Ted Ts'o: "Lots of cleanups, mostly courtesy by Eric Biggers" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: fscrypt: lock mutex before checking for bounce page pool fscrypt: add a documentation file for filesystem-level encryption ext4: switch to fscrypt_prepare_setattr() ext4: switch to fscrypt_prepare_lookup() ext4: switch to fscrypt_prepare_rename() ext4: switch to fscrypt_prepare_link() ext4: switch to fscrypt_file_open() fscrypt: new helper function - fscrypt_prepare_setattr() fscrypt: new helper function - fscrypt_prepare_lookup() fscrypt: new helper function - fscrypt_prepare_rename() fscrypt: new helper function - fscrypt_prepare_link() fscrypt: new helper function - fscrypt_file_open() fscrypt: new helper function - fscrypt_require_key() fscrypt: remove unneeded empty fscrypt_operations structs fscrypt: remove ->is_encrypted() fscrypt: switch from ->is_encrypted() to IS_ENCRYPTED() fs, fscrypt: add an S_ENCRYPTED inode flag fscrypt: clean up include file mess
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-18fscrypt: remove ->is_encrypted()Eric Biggers1-1/+0
Now that all callers of fscrypt_operations.is_encrypted() have been switched to IS_ENCRYPTED(), remove ->is_encrypted(). Reviewed-by: Chao Yu <yuchao0@huawei.com> Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-07-14ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrsXiaolei Li1-1/+6
The inode is not locked in init_xattrs when creating a new inode. Without this patch, there will occurs assert when booting or creating a new file, if the kernel config CONFIG_SECURITY_SMACK is enabled. Log likes: UBIFS assert failed in ubifs_xattr_set at 298 (pid 1156) CPU: 1 PID: 1156 Comm: ldconfig Tainted: G S 4.12.0-rc1-207440-g1e70b02 #2 Hardware name: MediaTek MT2712 evaluation board (DT) Call trace: [<ffff000008088538>] dump_backtrace+0x0/0x238 [<ffff000008088834>] show_stack+0x14/0x20 [<ffff0000083d98d4>] dump_stack+0x9c/0xc0 [<ffff00000835d524>] ubifs_xattr_set+0x374/0x5e0 [<ffff00000835d7ec>] init_xattrs+0x5c/0xb8 [<ffff000008385788>] security_inode_init_security+0x110/0x190 [<ffff00000835e058>] ubifs_init_security+0x30/0x68 [<ffff00000833ada0>] ubifs_mkdir+0x100/0x200 [<ffff00000820669c>] vfs_mkdir+0x11c/0x1b8 [<ffff00000820b73c>] SyS_mkdirat+0x74/0xd0 [<ffff000008082f8c>] __sys_trace_return+0x0/0x4 Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-02-08fscrypt: constify struct fscrypt_operationsEric Biggers1-1/+1
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Richard Weinberger <richard@nod.at>
2017-01-08fscrypt: make fscrypt_operations.key_prefix a stringEric Biggers1-10/+1
There was an unnecessary amount of complexity around requesting the filesystem-specific key prefix. It was unclear why; perhaps it was envisioned that different instances of the same filesystem type could use different key prefixes, or that key prefixes could be binary. However, neither of those things were implemented or really make sense at all. So simplify the code by making key_prefix a const char *. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-13ubifs: Use FS_CFLG_OWN_PAGESRichard Weinberger1-1/+1
Commit bd7b8290388d ("fscrypt: Cleanup page locking requirements for fscrypt_{decrypt,encrypt}_page()") renamed the flag. Signed-off-by: Richard Weinberger <richard@nod.at>
2016-12-12ubifs: Implement encrypt/decrypt for all IORichard Weinberger1-0/+51
Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-12-12ubifs: Constify struct inode pointer in ubifs_crypt_is_encrypted()Richard Weinberger1-1/+1
...and provide a non const variant for fscrypto Signed-off-by: Richard Weinberger <richard@nod.at>
2016-12-12ubifs: Add skeleton for fscryptoRichard Weinberger1-0/+46
This is the first building block to provide file level encryption on UBIFS. Signed-off-by: Richard Weinberger <richard@nod.at>