aboutsummaryrefslogtreecommitdiffstats
path: root/fs/ubifs/tnc_commit.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-06-22ubifs: Fix spelling mistakesZheng Yongjun1-1/+1
Fix some spelling mistakes in comments: withoug ==> without numer ==> number aswell ==> as well referes ==> refers childs ==> children unnecesarry ==> unnecessary Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-11-17ubifs: ubifs_tnc_start_commit: Fix OOB in layout_in_gapsZhihao Cheng1-7/+27
Running stress-test test_2 in mtd-utils on ubi device, sometimes we can get following oops message: BUG: unable to handle page fault for address: ffffffff00000140 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 280a067 P4D 280a067 PUD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 60 Comm: kworker/u16:1 Kdump: loaded Not tainted 5.2.0 #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0 -0-ga698c8995f-prebuilt.qemu.org 04/01/2014 Workqueue: writeback wb_workfn (flush-ubifs_0_0) RIP: 0010:rb_next_postorder+0x2e/0xb0 Code: 80 db 03 01 48 85 ff 0f 84 97 00 00 00 48 8b 17 48 83 05 bc 80 db 03 01 48 83 e2 fc 0f 84 82 00 00 00 48 83 05 b2 80 db 03 01 <48> 3b 7a 10 48 89 d0 74 02 f3 c3 48 8b 52 08 48 83 05 a3 80 db 03 RSP: 0018:ffffc90000887758 EFLAGS: 00010202 RAX: ffff888129ae4700 RBX: ffff888138b08400 RCX: 0000000080800001 RDX: ffffffff00000130 RSI: 0000000080800024 RDI: ffff888138b08400 RBP: ffff888138b08400 R08: ffffea0004a6b920 R09: 0000000000000000 R10: ffffc90000887740 R11: 0000000000000001 R12: ffff888128d48000 R13: 0000000000000800 R14: 000000000000011e R15: 00000000000007c8 FS: 0000000000000000(0000) GS:ffff88813ba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff00000140 CR3: 000000013789d000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: destroy_old_idx+0x5d/0xa0 [ubifs] ubifs_tnc_start_commit+0x4fe/0x1380 [ubifs] do_commit+0x3eb/0x830 [ubifs] ubifs_run_commit+0xdc/0x1c0 [ubifs] Above Oops are due to the slab-out-of-bounds happened in do-while of function layout_in_gaps indirectly called by ubifs_tnc_start_commit. In function layout_in_gaps, there is a do-while loop placing index nodes into the gaps created by obsolete index nodes in non-empty index LEBs until rest index nodes can totally be placed into pre-allocated empty LEBs. @c->gap_lebs points to a memory area(integer array) which records LEB numbers used by 'in-the-gaps' method. Whenever a fitable index LEB is found, corresponding lnum will be incrementally written into the memory area pointed by @c->gap_lebs. The size ((@c->lst.idx_lebs + 1) * sizeof(int)) of memory area is allocated before do-while loop and can not be changed in the loop. But @c->lst.idx_lebs could be increased by function ubifs_change_lp (called by layout_leb_in_gaps->ubifs_find_dirty_idx_leb->get_idx_gc_leb) during the loop. So, sometimes oob happens when number of cycles in do-while loop exceeds the original value of @c->lst.idx_lebs. See detail in https://bugzilla.kernel.org/show_bug.cgi?id=204229. This patch fixes oob in layout_in_gaps. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336Thomas Gleixner1-13/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 246 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-23ubifs: authentication: Add hashes to index nodesSascha Hauer1-0/+27
With this patch the hashes over the index nodes stored in the tree node cache are written to flash and are checked when read back from flash. The hash of the root index node is stored in the master node. During journal replay the hashes are regenerated from the read nodes and stored in the tree node cache. This means the nodes must previously be authenticated by other means. This is done in a later patch. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Pass struct ubifs_info to ubifs_assert()Richard Weinberger1-14/+14
This allows us to have more context in ubifs_assert() and take different actions depending on the configuration. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-2/+3
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-07-14ubifs: Fail commit if TNC is obviously inconsistentRichard Weinberger1-0/+4
A reference to LEB 0 or with length 0 in the TNC is never correct and could be caused by a memory corruption. Don't write such a bad index node to the MTD. Instead fail the commit which will turn UBIFS into read-only mode. This is less painful than having the bad reference on the MTD from where UBFIS has no chance to recover. Signed-off-by: Richard Weinberger <richard@nod.at>
2016-08-23ubifs: Fix assertion in layout_in_gaps()Vincent Stehlé1-1/+1
An assertion in layout_in_gaps() verifies that the gap_lebs pointer is below the maximum bound. When computing this maximum bound the idx_lebs count is multiplied by sizeof(int), while C pointers arithmetic does take into account the size of the pointed elements implicitly already. Remove the multiplication to fix the assertion. Fixes: 1e51764a3c2ac05a ("UBIFS: add new flash file system") Cc: <stable@vger.kernel.org> Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-03-25UBIFS: extend debug/message capabilitiesSheng Yong1-6/+6
In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-07-19UBIFS: remove useless statementshujianyang1-1/+0
This patch removes useless and duplicate statements. Signed-off-by: hujianyang <hujianyang@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra1-2/+2
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-01-15UBIFS: rename random32() to prandom_u32()Akinobu Mita1-1/+1
Use more preferable function name which implies using a pseudo-random number generator. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-05-20UBI: Kill data type hintRichard Weinberger1-4/+2
We do not need this feature and to our shame it even was not working and there was a bug found very recently. -- Artem Bityutskiy Without the data type hint UBI2 (fastmap) will be easier to implement. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-05-16UBIFS: remove Kconfig debugging optionArtem Bityutskiy1-10/+0
Have the debugging stuff always compiled-in instead. It simplifies maintanance a lot. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-05-16UBIFS: rename dumping functionsArtem Bityutskiy1-6/+6
This commit re-names all functions which dump something from "dbg_dump_*()" to "ubifs_dump_*()". This is done for consistency with UBI and because this way it will be more logical once we remove the debugging sompilation option. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-07-04UBIFS: lessen amount of debugging check typesArtem Bityutskiy1-3/+3
We have too many different debugging checks - lessen the amount by merging all index-related checks into one. At the same time, move the "force in-the-gap" test to the "index checks" class, because it is too heavy for the "general" class. This patch merges TNC, Old index, and Index size check and calles this just "index checks". Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-07-04UBIFS: introduce helper functions for debugging checks and testsArtem Bityutskiy1-2/+3
This patch introduces helper functions for all debugging checks, so instead of doing if (!(ubifs_chk_flags & UBIFS_CHK_GEN)) we now do if (!dbg_is_chk_gen(c)) This is a preparation to further changes where the flags will go away, and we'll need to only change the helper functions, but the code which utilizes them won't be touched. At the same time this patch removes 'dbg_force_in_the_gaps()', 'dbg_force_in_the_gaps_enabled()', and dbg_failure_mode helpers for consistency. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-07-04UBIFS: add few commentaries about TNCArtem Bityutskiy1-0/+26
Add a couple of comments - while looking into TNC I could not easily figure out few facts, so it is a good idea to document them in the code. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-07-04UBIFS: harmonize znode flag helpersArtem Bityutskiy1-4/+4
We have 3 znode flags: cow, obsolete, dirty. For the last flag we have a 'ubifs_zn_dirty()' helper function, but for the other 2 flags we use 'test_bit()' directly. This patch makes the situation more consistent and introduces helpers for the other 2 flags: 'ubifs_zn_cow()' and 'ubifs_zn_obsolete()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-07-04UBIFS: remove dead codeArtem Bityutskiy1-76/+30
Remove dead pieces of code under "if (c->min_io_size == 1)" statement - we never execute it because in UBIFS 'c->min_io_size' is always at least 8. This are leftovers from old pre-mainline prototype. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-13UBIFS: make force in-the-gaps to be a general self-checkArtem Bityutskiy1-2/+2
UBIFS can force itself to use the 'in-the-gaps' commit method - the last resort method which is normally invoced very very rarely. Currently this "force int-the-gaps" debugging feature is a separate test mode. But it is a bit saner to make it to be the "general" self-test check instead. This patch is just a clean-up which should make the debugging code look a bit nicer and easier to use - we have way too many debugging options. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-13UBIFS: improve space checking debugging featureArtem Bityutskiy1-1/+1
This patch improves the 'dbg_check_space_info()' function which checks whether the amount of space before re-mounting and after re-mounting is the same (remounting from R/O to R/W modes and vice-versa). The problem is that 'dbg_check_space_info()' does not save the budgeting information before re-mounting, so when an error is reported, we do not know why the amount of free space changed. This patches makes the following changes: 1. Teaches 'dbg_dump_budg()' function to accept a 'struct ubifs_budg_info' argument and print out the this argument. This way we may ask it to print any saved budgeting info, no only the current one. 2. Accordingly changes all the callers of 'dbg_dump_budg()' to comply with the changed interface. 3. Introduce a 'saved_bi' (saved budgeting info) field to 'struct ubifs_debug_info' and save the budgeting info before re-mounting there. 4. Change 'dbg_check_space_info()' and make it print both old and new budgeting information. 5. Additionally, save 'c->igx_gc_cnt' and print it if and error happens. This value contributes to the amount of free space, so we have to print it. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-13UBIFS: simplify dbg_dump_budg calling conventionsArtem Bityutskiy1-2/+0
The current 'dbg_dump_budg()' calling convention is that the 'c->space_lock' spinlock is held. However, none of the callers actually use it from contects which have 'c->space_lock' locked, so all callers have to explicitely lock and unlock the spinlock. This is not very sensible convention. This patch changes it and makes 'dbg_dump_budg()' lock the spinlock instead of imposing this to the callers. This simplifies the code a little. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-13UBIFS: introduce a separate structure for budgeting infoArtem Bityutskiy1-5/+5
This patch separates out all the budgeting-related information from 'struct ubifs_info' to 'struct ubifs_budg_info'. This way the code looks a bit cleaner. However, the main driver for this is that we want to save budgeting information and print it later, so a separate data structure for this is helpful. This patch is a preparation for the further debugging output improvements. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-09-10UBIFS: do not print scary error messages needlesslyArtem Bityutskiy1-1/+1
At the moment UBIFS print large and scary error messages and flash dumps in case of nearly any corruption, even if it is a recoverable corruption. For example, if the master node is corrupted, ubifs_scan() prints error dumps, then UBIFS recovers just fine and goes on. This patch makes UBIFS print scary error messages only in real cases, which are not recoverable. It adds 'quiet' argument to the 'ubifs_scan()' function, so the caller may ask 'ubi_scan()' not to print error messages if the caller is able to do recovery. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Reviewed-by: Adrian Hunter <Adrian.Hunter@nokia.com>
2008-12-23UBIFS: re-calculate min_idx_size after the commitArtem Bityutskiy1-0/+2
When we commit, but before we try to write anything to the flash media, @c->min_idx_size is inaccurate, because we do not re-calculate it after the commit. Do not forget to do this. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-12-03UBIFS: separate debugging fields outArtem Bityutskiy1-3/+4
Introduce a new data structure which contains all debugging stuff inside. This is cleaner than having debugging stuff directly in 'c'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13UBIFS: minor tweaks in commitArtem Bityutskiy1-19/+18
No functional changes, just lessen the amount of indentations. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-07-15UBIFS: add new flash file systemArtem Bityutskiy1-0/+1103
This is a new flash file system. See http://www.linux-mtd.infradead.org/doc/ubifs.html Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.