aboutsummaryrefslogtreecommitdiffstats
path: root/fs/udf (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-04-11udf_file_write_iter: reorder and simplifyAl Viro1-20/+14
it's easier to do generic_write_checks() first Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11generic_write_checks(): drop isblk argumentAl Viro1-1/+1
all remaining callers are passing 0; some just obscure that fact. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11lift generic_write_checks() into callers of __generic_file_write_iter()Al Viro1-0/+10
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11direct_IO: remove rw from a_ops->direct_IO()Omar Sandoval2-4/+2
Now that no one is using rw, remove it completely. Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11direct_IO: use iov_iter_rw() instead of rw everywhereOmar Sandoval1-1/+1
The rw parameter to direct_IO is redundant with iov_iter->type, and treated slightly differently just about everywhere it's used: some users do rw & WRITE, and others do rw == WRITE where they should be doing a bitwise check. Simplify this with the new iov_iter_rw() helper, which always returns either READ or WRITE. Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11Remove rw from {,__,do_}blockdev_direct_IO()Omar Sandoval1-1/+1
Most filesystems call through to these at some point, so we'll start here. Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11make new_sync_{read,write}() staticAl Viro1-2/+0
All places outside of core VFS that checked ->read and ->write for being NULL or called the methods directly are gone now, so NULL {read,write} with non-NULL {read,write}_iter will do the right thing in all cases. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-01udf: Update ctime and mtime when directory is modifiedJan Kara1-2/+7
We failed to update ctime & mtime of a directory when new entry was created in it during rename, link, create, etc. Fix that. Reported-by: Taesoo Kim <tsgatesv@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2015-04-01udf: return correct errno for udf_update_inode()Changwoo Min1-1/+1
Instead of -ENOMEM, properly return -EIO udf_update_inode() error, similar/consistent to the rest of filesystems. Signed-off-by: Changwoo Min <changwoo.m@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2015-03-25fs: move struct kiocb to fs.hChristoph Hellwig2-2/+2
struct kiocb now is a generic I/O container, so move it to fs.h. Also do a #include diet for aio.h while we're at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-16udf: use int for allocated blocks instead of sector_tFabian Frederick1-1/+1
Fix the following warnings: fs/udf/balloc.c:768:15: warning: conversion to 'sector_t' from 'int' may change the sign of the result [-Wsign-conversion] allocated = udf_bitmap_prealloc_blocks(sb, ^ fs/udf/balloc.c:773:15: warning: conversion to 'sector_t' from 'int' may change the sign of the result [-Wsign-conversion] allocated = udf_table_prealloc_blocks(sb, ^ fs/udf/balloc.c:778:15: warning: conversion to 'sector_t' from 'int' may change the sign of the result [-Wsign-conversion] allocated = udf_bitmap_prealloc_blocks(sb, ^ fs/udf/balloc.c:783:15: warning: conversion to 'sector_t' from 'int' may change the sign of the result [-Wsign-conversion] allocated = udf_table_prealloc_blocks(sb, ^ fs/udf/balloc.c:791:26: warning: conversion to 'loff_t' from 'sector_t' may change the sign of the result [-Wsign-conversion] inode_add_bytes(inode, allocated << sb->s_blocksize_bits); ^ fs/udf/balloc.c:792:2: warning: conversion to 'int' from 'sector_t' may alter its value [-Wconversion] return allocated; Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2015-03-14udf: remove redundant buffer_head.h includesFabian Frederick11-11/+0
buffer_head.h was already included in udfdecl.h Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2015-03-14udf: remove else after return in __load_block_bitmap()Fabian Frederick1-8/+7
else after return is not needed. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2015-03-14udf: remove unused variable in udf_table_free_blocks()Fabian Frederick1-2/+0
Fix set but not used warning. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2015-03-12fs: remove ki_nbytesChristoph Hellwig1-1/+1
There is no need to pass the total request length in the kiocb, as we already get passed in through the iov_iter argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-05udf: remove bool assignment to 0/1Fabian Frederick1-2/+2
Fix the following coccinelle warnings: fs/udf/inode.c:753:2-13: WARNING: Assignment of bool to 0/1 fs/udf/inode.c:795:2-13: WARNING: Assignment of bool to 0/1 Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2015-02-05udf: use bool for doneFabian Frederick1-2/+2
variable 'done' is only used for true/false in loop. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2015-01-30Merge branch 'for_linus' into for_nextJan Kara1-1/+1
2015-01-28udf: Release preallocation on last writeable closeJan Kara1-1/+1
Commit 6fb1ca92a640 "udf: Fix race between write(2) and close(2)" changed the condition when preallocation is released. The idea was that we don't want to release the preallocation for an inode on close when there are other writeable file descriptors for the inode. However the condition was written in the opposite way so we released preallocation only if there were other writeable file descriptors. Fix the problem by changing the condition properly. CC: stable@vger.kernel.org Fixes: 6fb1ca92a6409a9d5b0696447cd4997bc9aaf5a2 Reported-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2015-01-12udf: destroy sbi mutex in put_superFabian Frederick1-0/+1
Call mutex_destroy() on superblock mutex in udf_put_super() otherwise mutex debugging code isn't able to detect that mutex is used after being freed. (thanks to Jan Kara for complete definition). Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2015-01-07udf: Check length of extended attributes and allocation descriptorsJan Kara1-0/+9
Check length of extended attributes and allocation descriptors when loading inodes from disk. Otherwise corrupted filesystems could confuse the code and make the kernel oops. Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no> CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
2015-01-07udf: Remove repeated loads blocksizeJan Kara1-11/+8
Store blocksize in a local variable in udf_fill_inode() since it is used a lot of times. Signed-off-by: Jan Kara <jack@suse.cz>
2015-01-05udf: Update Kconfig descriptionJan Kara1-4/+6
Update description of UDF in Kconfig to mention that UDF is also suitable for removable USB disks. Signed-off-by: Jan Kara <jack@suse.cz>
2014-12-21udf: Reduce repeated dereferencesJan Kara2-25/+25
Replace repeated dereferences like dir->i_sb by storing superblock pointer in a variable and using that. Signed-off-by: Jan Kara <jack@suse.cz>
2014-12-21udf: Check component length before reading itJan Kara1-2/+7
Check that length specified in a component of a symlink fits in the input buffer we are reading. Also properly ignore component length for component types that do not use it. Otherwise we read memory after end of buffer for corrupted udf image. Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no> CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
2014-12-19udf: Check path length when reading symlinkJan Kara5-20/+48
Symlink reading code does not check whether the resulting path fits into the page provided by the generic code. This isn't as easy as just checking the symlink size because of various encoding conversions we perform on path. So we have to check whether there is still enough space in the buffer on the fly. CC: stable@vger.kernel.org Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no> Signed-off-by: Jan Kara <jack@suse.cz>
2014-12-19udf: Verify symlink size before loading itJan Kara1-4/+13
UDF specification allows arbitrarily large symlinks. However we support only symlinks at most one block large. Check the length of the symlink so that we don't access memory beyond end of the symlink block. CC: stable@vger.kernel.org Reported-by: Carl Henrik Lunde <chlunde@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2014-12-19udf: Verify i_size when loading inodeJan Kara1-0/+14
Verify that inode size is sane when loading inode with data stored in ICB. Otherwise we may get confused later when working with the inode and inode size is too big. CC: stable@vger.kernel.org Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no> Signed-off-by: Jan Kara <jack@suse.cz>
2014-11-19udf: One function call less in udf_fill_super() after error detectionMarkus Elfring1-2/+3
The iput() function was called in up to three cases by the udf_fill_super() function during error handling even if the passed data structure element contained still a null pointer. This implementation detail could be improved by the introduction of another jump label. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Jan Kara <jack@suse.cz>
2014-11-19udf: Deletion of unnecessary checks before the function call "iput"Markus Elfring1-4/+2
The iput() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Jan Kara <jack@suse.cz>
2014-10-09udf: Fix loading of special inodesJan Kara3-11/+26
Some UDF media have special inodes (like VAT or metadata partition inodes) whose link_count is 0. Thus commit 4071b9136223 (udf: Properly detect stale inodes) broke loading these inodes because udf_iget() started returning -ESTALE for them. Since we still need to properly detect stale inodes queried by NFS, create two variants of udf_iget() - one which is used for looking up special inodes (which ignores link_count == 0) and one which is used for other cases which return ESTALE when link_count == 0. Fixes: 4071b913622316970d0e1919f7d82b4403fec5f2 CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-29udf: remove redundant sys_tz declarationFabian Frederick1-2/+0
sys_tz is already declared in include/linux/time.h Cc: Jan Kara <jack@suse.cz> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-17udf: Fix race between write(2) and close(2)Jan Kara1-1/+8
Currently write(2) updating i_size and close(2) of the file can race in such a way that udf_truncate_tail_extent() called from udf_file_release() sees old i_size but already new extents added by the running write call. This results in complaints like: UDF-fs: warning (device vdb2): udf_truncate_tail_extent: Too long extent after EOF in inode 877: i_size: 0 lbcount: 1073739776 extent 0+1073739776 UDF-fs: error (device vdb2): udf_truncate_tail_extent: Extent after EOF in inode 877 Fix the problem by grabbing i_mutex in udf_file_release() to be sure i_size is consistent with current state of extent list. Also avoid truncating tail extent unnecessarily when the file is still open for writing. Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04udf: saner calling conventions for udf_new_inode()Al Viro3-43/+27
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04udf: fix the udf_iget() vs. udf_new_inode() racesAl Viro2-1/+13
Currently udf_iget() (triggered by NFS) can race with udf_new_inode() leading to two inode structures with the same inode number: nfsd: iget_locked() creates inode nfsd: try to read from disk, block on that. udf_new_inode(): allocate inode with that inumber udf_new_inode(): insert it into icache, set it up and dirty udf_write_inode(): write inode into buffer cache nfsd: get CPU again, look into buffer cache, see nice and sane on-disk inode, set the in-core inode from it Fix the problem by putting inode into icache in locked state (I_NEW set) and unlocking it only after it's fully set up. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04udf: merge the pieces inserting a new non-directory object into directoryAl Viro1-69/+29
boilerplate code in udf_{create,mknod,symlink} taken to new helper symlink case converted to unique id calculated by udf_new_inode() - no point finding a new one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04udf: Set i_generation fieldJan Kara2-0/+2
Currently UDF doesn't initialize i_generation in any way and thus NFS can easily get reallocated inodes from stale file handles. Luckily UDF already has a unique object identifier associated with each inode - i_unique. Use that for initialization of i_generation. Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04udf: Properly detect stale inodesJan Kara1-2/+4
NFS can easily ask for inodes that are already deleted. Currently UDF happily returns such inodes which is a bug. Return -ESTALE if udf_read_inode() is asked to read deleted inode. Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04udf: Make udf_read_inode() and udf_iget() return errorJan Kara4-95/+96
Currently __udf_read_inode() wasn't returning anything and we found out whether we succeeded reading inode by checking whether inode is bad or not. udf_iget() returned NULL on failure and inode pointer otherwise. Make these two functions properly propagate errors up the call stack and use the return value in callers. Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04udf: Avoid infinite loop when processing indirect ICBsJan Kara1-14/+21
We did not implement any bound on number of indirect ICBs we follow when loading inode. Thus corrupted medium could cause kernel to go into an infinite loop, possibly causing a stack overflow. Fix the possible stack overflow by removing recursion from __udf_read_inode() and limit number of indirect ICBs we follow to avoid infinite loops. Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04udf: Fold udf_fill_inode() into __udf_read_inode()Jan Kara1-17/+5
There's no good reason to separate these since udf_fill_inode() is called only from __udf_read_inode() and both do part of the same thing. Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04udf: Avoid dir link count to go negativeJan Kara1-1/+1
If we are writing back inode of unlinked directory, its link count ends up being (u16)-1. Although the inode is deleted, udf_iget() can load the inode when NFS uses stale file handle and get confused. Signed-off-by: Jan Kara <jack@suse.cz>
2014-08-19udf: avoid unneeded up_write when fail to add entry in ->symlinkChao Yu1-1/+2
We have released the ->i_data_sem before invoking udf_add_entry(), so in following error path, we should not release this lock again. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jan Kara <jack@suse.cz>
2014-07-15udf: avoid redundant memcpy when writing data in ICBChao Yu1-19/+1
Valid data within i_size in page cache will be copied to ICB cache when we writeback the page by invoking udf_adinicb_writepage, so the copy in udf_adinicb_write_end is redundant. After we remove the copy, it's better to use simple_write_end directly in udf_adinicb_aops instead of udf_adinicb_write_end. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jan Kara <jack@suse.cz>
2014-07-15fs/udf: re-use hex_asc_upper_{hi,lo} macrosAndy Shevchenko1-5/+4
This patch cleans up udf_translate_to_linux() a bit by using globally defined macros instead of custom code. We can use sprintf(buf, "%04X", ...) there as well, but this one faster. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jan Kara <jack@suse.cz>
2014-07-15udf: use linux/uaccess.hFabian Frederick4-4/+4
Fix checkpatch warning WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2014-05-06udf: switch to ->write_iter()Al Viro1-6/+5
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06switch simple generic_file_aio_read() users to ->read_iter()Al Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06switch {__,}blockdev_direct_IO() to iov_iterAl Viro1-2/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06get rid of pointless iov_length() in ->direct_IO()Al Viro1-1/+2
all callers have iov_length(iter->iov, iter->nr_segs) == iov_iter_count(iter) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.