| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull misc vfs updates from Al Viro:
"Making sure that something like a referral point won't end up as pwd
or root.
The main part is the last commit (fixing mntns_install()); that one
fixes a hard-to-hit race. The fchdir() commit is making fchdir(2) a
bit more robust - it should be impossible to get opened files (even
O_PATH ones) for referral points in the first place, so the existing
checks are OK, but checking the same thing as in chdir(2) is just as
cheap.
The path_init() commit removes a redundant check that shouldn't have
been there in the first place"
* 'work.sane_pwd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make sure that mntns_install() doesn't end up with referral for root
path_init(): don't bother with checking MAY_EXEC for LOOKUP_ROOT
make sure that fchdir() won't accept referral points, etc.
|
|
Pull MTD updates from Brian Norris:
"NAND, from Boris:
- some minor fixes/improvements on existing drivers (fsmc, gpio, ifc,
davinci, brcmnand, omap)
- a huge cleanup/rework of the denali driver accompanied with core
fixes/improvements to simplify the driver code
- a complete rewrite of the atmel driver to support new DT bindings
make future evolution easier
- the addition of per-vendor detection/initialization steps to avoid
extending the nand_ids table with more extended-id entries
SPI NOR, from Cyrille:
- fixes in the hisi, intel and Mediatek SPI controller drivers
- fixes to some SPI flash memories not supporting the Chip Erase
command.
- add support to some new memory parts (Winbond, Macronix, Micron,
ESMT).
- add new driver for the STM32 QSPI controller
And a few fixes for Gemini and Versatile platforms on physmap-of"
* tag 'for-linus-20170510' of git://git.infradead.org/linux-mtd: (100 commits)
MAINTAINERS: Update NAND subsystem git repositories
mtd: nand: gpio: update binding
mtd: nand: add ooblayout for old hamming layout
mtd: oxnas_nand: Allocating more than necessary in probe()
dt-bindings: mtd: Document the STM32 QSPI bindings
mtd: mtk-nor: set controller's address width according to nor flash
mtd: spi-nor: add driver for STM32 quad spi flash controller
mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program
mtd: nand: davinci: add comment on NAND subpage write status on keystone
mtd: nand: omap2: Fix partition creation via cmdline mtdparts
mtd: nand: NULL terminate a of_device_id table
mtd: nand: Fix a couple error codes
mtd: nand: allow drivers to request minimum alignment for passed buffer
mtd: nand: allocate aligned buffers if NAND_OWN_BUFFERS is unset
mtd: nand: denali: allow to override revision number
mtd: nand: denali_dt: use pdev instead of ofdev for platform_device
mtd: nand: denali_dt: remove dma-mask DT property
mtd: nand: denali: support 64bit capable DMA engine
mtd: nand: denali_dt: enable HW_ECC_FIXUP for Altera SOCFPGA variant
mtd: nand: denali: support HW_ECC_FIXUP capability
...
|
|
Pull hw lockdown support from David Howells:
"Annotation of module parameters that configure hardware resources
including ioports, iomem addresses, irq lines and dma channels.
This allows a future patch to prohibit the use of such module
parameters to prevent that hardware from being abused to gain access
to the running kernel image as part of locking the kernel down under
UEFI secure boot conditions.
Annotations are made by changing:
module_param(n, t, p)
module_param_named(n, v, t, p)
module_param_array(n, t, m, p)
to:
module_param_hw(n, t, hwtype, p)
module_param_hw_named(n, v, t, hwtype, p)
module_param_hw_array(n, t, hwtype, m, p)
where the module parameter refers to a hardware setting
hwtype specifies the type of the resource being configured. This can
be one of:
ioport Module parameter configures an I/O port
iomem Module parameter configures an I/O mem address
ioport_or_iomem Module parameter could be either (runtime set)
irq Module parameter configures an I/O port
dma Module parameter configures a DMA channel
dma_addr Module parameter configures a DMA buffer address
other Module parameter configures some other value
Note that the hwtype is compile checked, but not currently stored (the
lockdown code probably won't require it). It is, however, there for
future use.
A bonus is that the hwtype can also be used for grepping.
The intention is for the kernel to ignore or reject attempts to set
annotated module parameters if lockdown is enabled. This applies to
options passed on the boot command line, passed to insmod/modprobe or
direct twiddling in /sys/module/ parameter files.
The module initialisation then needs to handle the parameter not being
set, by (1) giving an error, (2) probing for a value or (3) using a
reasonable default.
What I can't do is just reject a module out of hand because it may
take a hardware setting in the module parameters. Some important
modules, some ipmi stuff for instance, both probe for hardware and
allow hardware to be manually specified; if the driver is aborts with
any error, you don't get any ipmi hardware.
Further, trying to do this entirely in the module initialisation code
doesn't protect against sysfs twiddling.
[!] Note that in and of itself, this series of patches should have no
effect on the the size of the kernel or code execution - that is
left to a patch in the next series to effect. It does mark
annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in
an already existing field"
* tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits)
Annotate hardware config module parameters in sound/pci/
Annotate hardware config module parameters in sound/oss/
Annotate hardware config module parameters in sound/isa/
Annotate hardware config module parameters in sound/drivers/
Annotate hardware config module parameters in fs/pstore/
Annotate hardware config module parameters in drivers/watchdog/
Annotate hardware config module parameters in drivers/video/
Annotate hardware config module parameters in drivers/tty/
Annotate hardware config module parameters in drivers/staging/vme/
Annotate hardware config module parameters in drivers/staging/speakup/
Annotate hardware config module parameters in drivers/staging/media/
Annotate hardware config module parameters in drivers/scsi/
Annotate hardware config module parameters in drivers/pcmcia/
Annotate hardware config module parameters in drivers/pci/hotplug/
Annotate hardware config module parameters in drivers/parport/
Annotate hardware config module parameters in drivers/net/wireless/
Annotate hardware config module parameters in drivers/net/wan/
Annotate hardware config module parameters in drivers/net/irda/
Annotate hardware config module parameters in drivers/net/hamradio/
Annotate hardware config module parameters in drivers/net/ethernet/
...
|
|
Pull nfsd updates from Bruce Fields:
"Another RDMA update from Chuck Lever, and a bunch of miscellaneous
bugfixes"
* tag 'nfsd-4.12' of git://linux-nfs.org/~bfields/linux: (26 commits)
nfsd: Fix up the "supattr_exclcreat" attributes
nfsd: encoders mustn't use unitialized values in error cases
nfsd: fix undefined behavior in nfsd4_layout_verify
lockd: fix lockd shutdown race
NFSv4: Fix callback server shutdown
SUNRPC: Refactor svc_set_num_threads()
NFSv4.x/callback: Create the callback service through svc_create_pooled
lockd: remove redundant check on block
svcrdma: Clean out old XDR encoders
svcrdma: Remove the req_map cache
svcrdma: Remove unused RDMA Write completion handler
svcrdma: Reduce size of sge array in struct svc_rdma_op_ctxt
svcrdma: Clean up RPC-over-RDMA backchannel reply processing
svcrdma: Report Write/Reply chunk overruns
svcrdma: Clean up RDMA_ERROR path
svcrdma: Use rdma_rw API in RPC reply path
svcrdma: Introduce local rdma_rw API helpers
svcrdma: Clean up svc_rdma_get_inv_rkey()
svcrdma: Add helper to save pages under I/O
svcrdma: Eliminate RPCRDMA_SQ_DEPTH_MULT
...
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable bugfixes:
- Fix use after free in write error path
- Use GFP_NOIO for two allocations in writeback
- Fix a hang in OPEN related to server reboot
- Check the result of nfs4_pnfs_ds_connect
- Fix an rcu lock leak
Features:
- Removal of the unmaintained and unused OSD pNFS layout
- Cleanup and removal of lots of unnecessary dprintk()s
- Cleanup and removal of some memory failure paths now that GFP_NOFS
is guaranteed to never fail.
- Remove the v3-only data server limitation on pNFS/flexfiles
Bugfixes:
- RPC/RDMA connection handling bugfixes
- Copy offload: fixes to ensure the copied data is COMMITed to disk.
- Readdir: switch back to using the ->iterate VFS interface
- File locking fixes from Ben Coddington
- Various use-after-free and deadlock issues in pNFS
- Write path bugfixes"
* tag 'nfs-for-4.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (89 commits)
pNFS/flexfiles: Always attempt to call layoutstats when flexfiles is enabled
NFSv4.1: Work around a Linux server bug...
NFS append COMMIT after synchronous COPY
NFSv4: Fix exclusive create attributes encoding
NFSv4: Fix an rcu lock leak
nfs: use kmap/kunmap directly
NFS: always treat the invocation of nfs_getattr as cache hit when noac is on
Fix nfs_client refcounting if kmalloc fails in nfs4_proc_exchange_id and nfs4_proc_async_renew
NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION
pNFS: Fix NULL dereference in pnfs_generic_alloc_ds_commits
pNFS: Fix a typo in pnfs_generic_alloc_ds_commits
pNFS: Fix a deadlock when coalescing writes and returning the layout
pNFS: Don't clear the layout return info if there are segments to return
pNFS: Ensure we commit the layout if it has been invalidated
pNFS: Don't send COMMITs to the DSes if the server invalidated our layout
pNFS/flexfiles: Fix up the ff_layout_write_pagelist failure path
pNFS: Ensure we check layout validity before marking it for return
NFS4.1 handle interrupted slot reuse from ERR_DELAY
NFSv4: check return value of xdr_inline_decode
nfs/filelayout: fix NULL pointer dereference in fl_pnfs_update_layout()
...
|
|
If an NFSv4 client asks us for the supattr_exclcreat, then we must
not return attributes that are unsupported by this minor version.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fixes: 75976de6556f ("NFSD: Return word2 bitmask if setting security..,")
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
In error cases, lgp->lg_layout_type may be out of bounds; so we
shouldn't be using it until after the check of nfserr.
This was seen to crash nfsd threads when the server receives a LAYOUTGET
request with a large layout type.
GETDEVICEINFO has the same problem.
Reported-by: Ari Kauppi <Ari.Kauppi@synopsys.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Pull RCU updates from Ingo Molnar:
"The main changes are:
- Debloat RCU headers
- Parallelize SRCU callback handling (plus overlapping patches)
- Improve the performance of Tree SRCU on a CPU-hotplug stress test
- Documentation updates
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits)
rcu: Open-code the rcu_cblist_n_lazy_cbs() function
rcu: Open-code the rcu_cblist_n_cbs() function
rcu: Open-code the rcu_cblist_empty() function
rcu: Separately compile large rcu_segcblist functions
srcu: Debloat the <linux/rcu_segcblist.h> header
srcu: Adjust default auto-expediting holdoff
srcu: Specify auto-expedite holdoff time
srcu: Expedite first synchronize_srcu() when idle
srcu: Expedited grace periods with reduced memory contention
srcu: Make rcutorture writer stalls print SRCU GP state
srcu: Exact tracking of srcu_data structures containing callbacks
srcu: Make SRCU be built by default
srcu: Fix Kconfig botch when SRCU not selected
rcu: Make non-preemptive schedule be Tasks RCU quiescent state
srcu: Expedite srcu_schedule_cbs_snp() callback invocation
srcu: Parallelize callback handling
kvm: Move srcu_struct fields to end of struct kvm
rcu: Fix typo in PER_RCU_NODE_PERIOD header comment
rcu: Use true/false in assignment to bool
rcu: Use bool value directly
...
|
|
Pull overlayfs update from Miklos Szeredi:
"The biggest part of this is making st_dev/st_ino on the overlay behave
like a normal filesystem (i.e. st_ino doesn't change on copy up,
st_dev is the same for all files and directories). Currently this only
works if all layers are on the same filesystem, but future work will
move the general case towards more sane behavior.
There are also miscellaneous fixes, including fixes to handling
append-only files. There's a small change in the VFS, but that only
has an effect on overlayfs, since otherwise file->f_path.dentry->inode
and file_inode(file) are always the same"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: update documentation w.r.t. constant inode numbers
ovl: persistent inode numbers for upper hardlinks
ovl: merge getattr for dir and nondir
ovl: constant st_ino/st_dev across copy up
ovl: persistent inode number for directories
ovl: set the ORIGIN type flag
ovl: lookup non-dir copy-up-origin by file handle
ovl: use an auxiliary var for overlay root entry
ovl: store file handle of lower inode on copy up
ovl: check if all layers are on the same fs
ovl: do not set overlay.opaque on non-dir create
ovl: check IS_APPEND() on real upper inode
vfs: ftruncate check IS_APPEND() on real upper inode
ovl: Use designated initializers
ovl: lockdep annotate of nested stacked overlayfs inode lock
|
|
Pull fuse updates from Miklos Szeredi:
"Support for pid namespaces from Seth and refcount_t work from Elena"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: Add support for pid namespaces
fuse: convert fuse_conn.count from atomic_t to refcount_t
fuse: convert fuse_req.count from atomic_t to refcount_t
fuse: convert fuse_file.count from atomic_t to refcount_t
|
|
Pull ceph updates from Ilya Dryomov:
"The two main items are support for disabling automatic rbd exclusive
lock transfers from myself and the long awaited -ENOSPC handling
series from Jeff.
The former will allow rbd users to take advantage of exclusive lock's
built-in blacklist/break-lock functionality while staying in control
of who owns the lock. With the latter in place, we will abort
filesystem writes on -ENOSPC instead of having them block
indefinitely.
Beyond that we've got the usual pile of filesystem fixes from Zheng,
some refcount_t conversion patches from Elena and a patch for an
ancient open() flags handling bug from Alexander"
* tag 'ceph-for-4.12-rc1' of git://github.com/ceph/ceph-client: (31 commits)
ceph: fix memory leak in __ceph_setxattr()
ceph: fix file open flags on ppc64
ceph: choose readdir frag based on previous readdir reply
rbd: exclusive map option
rbd: return ResponseMessage result from rbd_handle_request_lock()
rbd: kill rbd_is_lock_supported()
rbd: support updating the lock cookie without releasing the lock
rbd: store lock cookie
rbd: ignore unlock errors
rbd: fix error handling around rbd_init_disk()
rbd: move rbd_unregister_watch() call into rbd_dev_image_release()
rbd: move rbd_dev_destroy() call out of rbd_dev_image_release()
ceph: when seeing write errors on an inode, switch to sync writes
Revert "ceph: SetPageError() for writeback pages if writepages fails"
ceph: handle epoch barriers in cap messages
libceph: add an epoch_barrier field to struct ceph_osd_client
libceph: abort already submitted but abortable requests when map or pool goes full
libceph: allow requests to return immediately on full conditions if caller wishes
libceph: remove req->r_replay_version
ceph: make seeky readdir more efficient
...
|
|
Pull btrfs updates from Chris Mason:
"This has fixes and cleanups Dave Sterba collected for the merge
window.
The biggest functional fixes are between btrfs raid5/6 and scrub, and
raid5/6 and device replacement. Some of our pending qgroup fixes are
included as well while I bash on the rest in testing.
We also have the usual set of cleanups, including one that makes
__btrfs_map_block() much more maintainable, and conversions from
atomic_t to refcount_t"
* 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (71 commits)
btrfs: fix the gfp_mask for the reada_zones radix tree
Btrfs: fix reported number of inode blocks
Btrfs: send, fix file hole not being preserved due to inline extent
Btrfs: fix extent map leak during fallocate error path
Btrfs: fix incorrect space accounting after failure to insert inline extent
Btrfs: fix invalid attempt to free reserved space on failure to cow range
btrfs: Handle delalloc error correctly to avoid ordered extent hang
btrfs: Fix metadata underflow caused by btrfs_reloc_clone_csum error
btrfs: check if the device is flush capable
btrfs: delete unused member nobarriers
btrfs: scrub: Fix RAID56 recovery race condition
btrfs: scrub: Introduce full stripe lock for RAID56
btrfs: Use ktime_get_real_ts for root ctime
Btrfs: handle only applicable errors returned by btrfs_get_extent
btrfs: qgroup: Fix qgroup corruption caused by inode_cache mount option
btrfs: use q which is already obtained from bdev_get_queue
Btrfs: switch to div64_u64 if with a u64 divisor
Btrfs: update scrub_parity to use u64 stripe_len
Btrfs: enable repair during read for raid56 profile
btrfs: use clear_page where appropriate
...
|
|
UBSAN: Undefined behaviour in fs/nfsd/nfs4proc.c:1262:34
shift exponent 128 is too large for 32-bit type 'int'
Depending on compiler+architecture, this may cause the check for
layout_type to succeed for overly large values (which seems to be the
case with amd64). The large value will be later used in de-referencing
nfsd4_layout_ops for function pointers.
Reported-by: Jani Tuovila <tuovila@synopsys.com>
Signed-off-by: Ari Kauppi <ari@synopsys.com>
[colin.king@canonical.com: use LAYOUT_TYPE_MAX instead of 32]
Cc: stable@vger.kernel.org
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Layoutstats is always desirable when using the flexfiles driver, so
we should enable it if that driver is being loaded. It is safe to do
so, because even when the mount specifies NFSv4.1, we will turn it
off if the server tells us it is unsupported.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
It turns out the Linux server has a bug in its implementation of
supattr_exclcreat; it returns the set of all attributes, whether
or not they are supported by minor version 1.
In order to avoid a regression, we therefore apply the supported_attrs
as a mask on top of whatever the server sent us.
Reported-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Pull misc vfs updates from Al Viro:
"Assorted bits and pieces from various people. No common topic in this
pile, sorry"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/affs: add rename exchange
fs/affs: add rename2 to prepare multiple methods
Make stat/lstat/fstatat pass AT_NO_AUTOMOUNT to vfs_statx()
fs: don't set *REFERENCED on single use objects
fs: compat: Remove warning from COMPATIBLE_IOCTL
remove pointless extern of atime_need_update_rcu()
fs: completely ignore unknown open flags
fs: add a VALID_OPEN_FLAGS
fs: remove _submit_bh()
fs: constify tree_descr arrays passed to simple_fill_super()
fs: drop duplicate header percpu-rwsem.h
fs/affs: bugfix: Write files greater than page size on OFS
fs/affs: bugfix: enable writes on OFS disks
fs/affs: remove node generation check
fs/affs: import amigaffs.h
fs/affs: bugfix: make symbolic links work again
|
|
We fixed the bugs in it, but it's still an ugly interface, so let's see
if anybody actually depends on it. It's entirely possible that nothing
actually requires the whole "punch through read-only mappings"
semantics.
For example, gdb definitely uses the /proc/<pid>/mem interface, but it
looks like it mainly does it for regular reads of the target (that don't
need FOLL_FORCE), and looking at the gdb source code seems to fall back
on the traditional ptrace(PTRACE_POKEDATA) interface if it needs to.
If this breaks something, I do have a (more complex) version that only
enables FOLL_FORCE when somebody has PTRACE_ATTACH'ed to the target,
like the comment here used to say ("Maybe we should limit FOLL_FORCE to
actual ptrace users?").
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge more updates from Andrew Morton:
- the rest of MM
- various misc things
- procfs updates
- lib/ updates
- checkpatch updates
- kdump/kexec updates
- add kvmalloc helpers, use them
- time helper updates for Y2038 issues. We're almost ready to remove
current_fs_time() but that awaits a btrfs merge.
- add tracepoints to DAX
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits)
drivers/staging/ccree/ssi_hash.c: fix build with gcc-4.4.4
selftests/vm: add a test for virtual address range mapping
dax: add tracepoint to dax_insert_mapping()
dax: add tracepoint to dax_writeback_one()
dax: add tracepoints to dax_writeback_mapping_range()
dax: add tracepoints to dax_load_hole()
dax: add tracepoints to dax_pfn_mkwrite()
dax: add tracepoints to dax_iomap_pte_fault()
mtd: nand: nandsim: convert to memalloc_noreclaim_*()
treewide: convert PF_MEMALLOC manipulations to new helpers
mm: introduce memalloc_noreclaim_{save,restore}
mm: prevent potential recursive reclaim due to clearing PF_MEMALLOC
mm/huge_memory.c: deposit a pgtable for DAX PMD faults when required
mm/huge_memory.c: use zap_deposited_table() more
time: delete CURRENT_TIME_SEC and CURRENT_TIME
gfs2: replace CURRENT_TIME with current_time
apparmorfs: replace CURRENT_TIME with current_time()
lustre: replace CURRENT_TIME macro
fs: ubifs: replace CURRENT_TIME_SEC with current_time
fs: ufs: use ktime_get_real_ts64() for birthtime
...
|
|
Add a tracepoint to dax_insert_mapping(), following the same logging
conventions as the rest of DAX. This tracepoint, along with the one in
dax_load_hole(), lets us know how a DAX PTE fault was serviced.
Here is an example DAX fault that inserts a PTE mapping:
small-1126 [007] ....
145.451604: dax_pte_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220
small-1126 [007] ....
145.452317: dax_insert_mapping: dev 259:0 ino 0x1003 shared write address 0x10420000 radix_entry 0x100006
small-1126 [007] ....
145.452399: dax_pte_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220 MAJOR|NOPAGE
Link: http://lkml.kernel.org/r/20170221195116.13278-7-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a tracepoint to dax_writeback_one(), following the same logging
conventions as the rest of DAX.
Here is an example range writeback which ends up flushing one PMD and
one PTE:
test-1265 [003] ....
496.615250: dax_writeback_range: dev 259:0 ino 0x1003 pgoff 0x0-0x7ffffffffffff
test-1265 [003] ....
496.616263: dax_writeback_one: dev 259:0 ino 0x1003 pgoff 0x0 pglen 0x200
test-1265 [003] ....
496.616270: dax_writeback_one: dev 259:0 ino 0x1003 pgoff 0x305 pglen 0x1
test-1265 [003] ....
496.616272: dax_writeback_range_done: dev 259:0 ino 0x1003 pgoff 0x0-0x7ffffffffffff
[akpm@linux-foundation.org: struct blk_dax_ctl has disappeared]
Link: http://lkml.kernel.org/r/20170221195116.13278-6-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add tracepoints to dax_writeback_mapping_range(), following the same
logging conventions as the rest of DAX.
Here is an example writeback call:
msync-1085 [006] ....
200.902565: dax_writeback_range: dev 259:0 ino 0x1003 pgoff 0x200-0x2ff
msync-1085 [006] ....
200.902579: dax_writeback_range_done: dev 259:0 ino 0x1003 pgoff 0x200-0x2ff
[ross.zwisler@linux.intel.com: fix regression in dax_writeback_mapping_range()]
Link: http://lkml.kernel.org/r/20170314215358.31451-1-ross.zwisler@linux.intel.com
Link: http://lkml.kernel.org/r/20170221195116.13278-5-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add tracepoints to dax_load_hole(), following the same logging conventions
as the rest of DAX.
Here is the logging generated by a PTE read from a hole:
read-1075 [002] ....
62.362108: dax_pte_fault: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10480000 pgoff 0x280
read-1075 [002] ....
62.362140: dax_load_hole: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10480000 pgoff 0x280 NOPAGE
read-1075 [002] ....
62.362141: dax_pte_fault_done: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10480000 pgoff 0x280 NOPAGE
Link: http://lkml.kernel.org/r/20170221195116.13278-4-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add tracepoints to dax_pfn_mkwrite(), following the same logging
conventions as the rest of DAX.
Here is an example PTE fault followed by a pfn_mkwrite:
small_aligned-1094 [002] ....
374.084998: dax_pte_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10400000 pgoff 0x200
small_aligned-1094 [002] ....
374.085145: dax_pte_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10400000 pgoff 0x200 MAJOR|NOPAGE
small_aligned-1094 [002] ....
374.085165: dax_pfn_mkwrite: dev 259:0 ino 0x1003 shared WRITE|MKWRITE|ALLOW_RETRY|KILLABLE|USER address 0x10400000 pgoff 0x200 NOPAGE
Link: http://lkml.kernel.org/r/20170221195116.13278-3-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "second round of tracepoints for DAX".
This second round of DAX tracepoint patches adds tracing to the PTE
fault path (dax_iomap_pte_fault(), dax_pfn_mkwrite(), dax_load_hole(),
dax_insert_mapping()) and to the writeback path
(dax_writeback_mapping_range(), dax_writeback_one()).
The purpose of this tracing is to give us a high level view of what DAX
is doing, whether faults are being serviced by PMDs or PTEs, and by real
storage or by zero pages covering holes.
I do have some patches nearly ready which also add tracing to
grab_mapping_entry() and dax_insert_mapping_entry(). These are more
targeted at logging how we are interacting with the radix tree, how we
use empty entries for locking, whether we "downgrade" huge zero pages to
4k PTE sized allocations, etc. In the end it seemed to me that this
might be too detailed to have as constantly present tracepoints, but if
anyone sees value in having tracepoints like this in the DAX code
permanently (Jan?), please let me know and I'll add those last two
patches.
All these tracepoints were done to be consistent with the style of the
XFS tracepoints and with the existing DAX PMD tracepoints.
This patch (of 6):
Add tracepoints to dax_iomap_pte_fault(), following the same logging
conventions as the rest of DAX.
Here is an example fault that initially tries to be serviced by the PMD
fault handler but which falls back to PTEs because the VMA isn't large
enough to hold a PMD:
small-1086 [005] ....
71.140014: xfs_filemap_huge_fault: dev 259:0 ino 0x1003
small-1086 [005] ....
71.140027: dax_pmd_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 vm_start 0x10200000 vm_end 0x10500000 pgoff 0x220 max_pgoff 0x1400
small-1086 [005] ....
71.140028: dax_pmd_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 vm_start 0x10200000 vm_end 0x10500000 pgoff 0x220 max_pgoff 0x1400 FALLBACK
small-1086 [005] ....
71.140035: dax_pte_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220
small-1086 [005] ....
71.140396: dax_pte_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220 MAJOR|NOPAGE
Link: http://lkml.kernel.org/r/20170221195116.13278-2-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Link: http://lkml.kernel.org/r/20170420161852.0492bc3f@canb.auug.org.au
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CURRENT_TIME_SEC is not y2038 safe. current_time() will be transitioned
to use 64 bit time along with vfs in a separate patch. There is no plan
to transition CURRENT_TIME_SEC to use y2038 safe time interfaces.
current_time() returns timestamps according to the granularities set in
the inode's super_block. The granularity check to call
current_fs_time() or CURRENT_TIME_SEC is not required.
Use current_time() directly to update inode timestamp. Use
timespec_trunc during file system creation, before the first inode is
created.
Link: http://lkml.kernel.org/r/1491613030-11599-9-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Weinberger <richard@nod.at>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CURRENT_TIME is not y2038 safe. Replace it with ktime_get_real_ts64().
Inode time formats are already 64 bit long and accommodates time64_t.
Link: http://lkml.kernel.org/r/1491613030-11599-6-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CURRENT_TIME is not y2038 safe. The macro will be deleted and all the
references to it will be replaced by ktime_get_* apis.
struct timespec is also not y2038 safe. Retain timespec for timestamp
representation here as ceph uses it internally everywhere. These
references will be changed to use struct timespec64 in a separate patch.
The current_fs_time() api is being changed to use vfs struct inode* as
an argument instead of struct super_block*.
Set the new mds client request r_stamp field using ktime_get_real_ts()
instead of using current_fs_time().
Also, since r_stamp is used as mtime on the server, use timespec_trunc()
to truncate the timestamp, using the right granularity from the
superblock.
This api will be transitioned to be y2038 safe along with vfs.
Link: http://lkml.kernel.org/r/1491613030-11599-5-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
M: Ilya Dryomov <idryomov@gmail.com>
M: "Yan, Zheng" <zyan@redhat.com>
M: Sage Weil <sage@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CURRENT_TIME macro is not y2038 safe on 32 bit systems.
The patch replaces all the uses of CURRENT_TIME by current_time() for
filesystem times, and ktime_get_* functions for authentication
timestamps and timezone calculations.
This is also in preparation for the patch that transitions vfs
timestamps to use 64 bit time and hence make them y2038 safe.
CURRENT_TIME macro will be deleted before merging the aforementioned
change.
The inode timestamps read from the server are assumed to have correct
granularity and range.
The patch also assumes that the difference between server and client
times lie in the range INT_MIN..INT_MAX. This is valid because this is
the difference between current times between server and client, and the
largest timezone difference is in the range of one day.
All cifs timestamps currently use timespec representation internally.
Authentication and timezone timestamps can also be transitioned into
using timespec64 when all other timestamps for cifs is transitioned to
use timespec64.
Link: http://lkml.kernel.org/r/1491613030-11599-4-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CURRENT_TIME_SEC is not y2038 safe.
Replace use of CURRENT_TIME_SEC with ktime_get_real_seconds in segment
timestamps used by GC algorithm including the segment mtime timestamps.
Link: http://lkml.kernel.org/r/1491613030-11599-2-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit afddba49d18f ("fs: introduce write_begin, write_end, and
perform_write aops") introduced AOP_FLAG_UNINTERRUPTIBLE flag which was
checked in pagecache_write_begin(), but that check was removed by
4e02ed4b4a2f ("fs: remove prepare_write/commit_write").
Between these two commits, commit d9414774dc0c ("cifs: Convert cifs to
new aops.") added a check in cifs_write_begin(), but that check was soon
removed by commit a98ee8c1c707 ("[CIFS] fix regression in
cifs_write_begin/cifs_write_end").
Therefore, AOP_FLAG_UNINTERRUPTIBLE flag is checked nowhere. Let's
remove this flag. This patch has no functionality changes.
Link: http://lkml.kernel.org/r/1489294781-53494-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix typos and add the following to the scripts/spelling.txt:
intialisation||initialisation
intialised||initialised
intialise||initialise
This commit does not intend to change the British spelling itself.
Link: http://lkml.kernel.org/r/1481573103-11329-18-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__vmalloc* allows users to provide gfp flags for the underlying
allocation. This API is quite popular
$ git grep "=[[:space:]]__vmalloc\|return[[:space:]]*__vmalloc" | wc -l
77
The only problem is that many people are not aware that they really want
to give __GFP_HIGHMEM along with other flags because there is really no
reason to consume precious lowmemory on CONFIG_HIGHMEM systems for pages
which are mapped to the kernel vmalloc space. About half of users don't
use this flag, though. This signals that we make the API unnecessarily
too complex.
This patch simply uses __GFP_HIGHMEM implicitly when allocating pages to
be mapped to the vmalloc space. Current users which add __GFP_HIGHMEM
are simplified and drop the flag.
Link: http://lkml.kernel.org/r/20170307141020.29107-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Cristopher Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are many code paths opencoding kvmalloc. Let's use the helper
instead. The main difference to kvmalloc is that those users are
usually not considering all the aspects of the memory allocator. E.g.
allocation requests <= 32kB (with 4kB pages) are basically never failing
and invoke OOM killer to satisfy the allocation. This sounds too
disruptive for something that has a reasonable fallback - the vmalloc.
On the other hand those requests might fallback to vmalloc even when the
memory allocator would succeed after several more reclaim/compaction
attempts previously. There is no guarantee something like that happens
though.
This patch converts many of those places to kv[mz]alloc* helpers because
they are more conservative.
Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390
Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim
Acked-by: David Sterba <dsterba@suse.com> # btrfs
Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph
Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4
Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Santosh Raspatur <santosh@chelsio.com>
Cc: Hariprasad S <hariprasad@chelsio.com>
Cc: Yishai Hadas <yishaih@mellanox.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
getxattr uses vmalloc to allocate memory if kzalloc fails. This is
filled by vfs_getxattr and then copied to the userspace. vmalloc,
however, doesn't zero out the memory so if the specific implementation
of the xattr handler is sloppy we can theoretically expose a kernel
memory. There is no real sign this is really the case but let's make
sure this will not happen and use vzalloc instead.
Fixes: 779302e67835 ("fs/xattr.c:getxattr(): improve handling of allocation failures")
Link: http://lkml.kernel.org/r/20170306103327.2766-1-mhocko@kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org> [3.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "kvmalloc", v5.
There are many open coded kmalloc with vmalloc fallback instances in the
tree. Most of them are not careful enough or simply do not care about
the underlying semantic of the kmalloc/page allocator which means that
a) some vmalloc fallbacks are basically unreachable because the kmalloc
part will keep retrying until it succeeds b) the page allocator can
invoke a really disruptive steps like the OOM killer to move forward
which doesn't sound appropriate when we consider that the vmalloc
fallback is available.
As it can be seen implementing kvmalloc requires quite an intimate
knowledge if the page allocator and the memory reclaim internals which
strongly suggests that a helper should be implemented in the memory
subsystem proper.
Most callers, I could find, have been converted to use the helper
instead. This is patch 6. There are some more relying on __GFP_REPEAT
in the networking stack which I have converted as well and Eric Dumazet
was not opposed [2] to convert them as well.
[1] http://lkml.kernel.org/r/20170130094940.13546-1-mhocko@kernel.org
[2] http://lkml.kernel.org/r/1485273626.16328.301.camel@edumazet-glaptop3.roam.corp.google.com
This patch (of 9):
Using kmalloc with the vmalloc fallback for larger allocations is a
common pattern in the kernel code. Yet we do not have any common helper
for that and so users have invented their own helpers. Some of them are
really creative when doing so. Let's just add kv[mz]alloc and make sure
it is implemented properly. This implementation makes sure to not make
a large memory pressure for > PAGE_SZE requests (__GFP_NORETRY) and also
to not warn about allocation failures. This also rules out the OOM
killer as the vmalloc is a more approapriate fallback than a disruptive
user visible action.
This patch also changes some existing users and removes helpers which
are specific for them. In some cases this is not possible (e.g.
ext4_kvmalloc, libcfs_kvzalloc) because those seems to be broken and
require GFP_NO{FS,IO} context which is not vmalloc compatible in general
(note that the page table allocation is GFP_KERNEL). Those need to be
fixed separately.
While we are at it, document that __vmalloc{_node} about unsupported gfp
mask because there seems to be a lot of confusion out there.
kvmalloc_node will warn about GFP_KERNEL incompatible (which are not
superset) flags to catch new abusers. Existing ones would have to die
slowly.
[sfr@canb.auug.org.au: f2fs fixup]
Link: http://lkml.kernel.org/r/20170320163735.332e64b7@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170306103032.2540-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Andreas Dilger <adilger@dilger.ca> [ext4 part]
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
pid_ns_for_children set by a task is known only to the task itself, and
it's impossible to identify it from outside.
It's a big problem for checkpoint/restore software like CRIU, because it
can't correctly handle tasks, that do setns(CLONE_NEWPID) in proccess of
their work.
This patch solves the problem, and it exposes pid_ns_for_children to ns
directory in standard way with the name "pid_for_children":
~# ls /proc/5531/ns -l | grep pid
lrwxrwxrwx 1 root root 0 Jan 14 16:38 pid -> pid:[4026531836]
lrwxrwxrwx 1 root root 0 Jan 14 16:38 pid_for_children -> pid:[4026532286]
Link: http://lkml.kernel.org/r/149201123914.6007.2187327078064239572.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Andrei Vagin <avagin@virtuozzo.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Expose task pid_ns_for_children to userspace".
pid_ns_for_children set by a task is known only to the task itself, and
it's impossible to identify it from outside.
It's a big problem for checkpoint/restore software like CRIU, because it
can't correctly handle tasks, that do setns(CLONE_NEWPID) in proccess of
their work. If they have a custom pid_ns_for_children before dump, they
must have the same ns after restore. Otherwise, restored task bumped
into enviroment it does not expect.
This patchset solves the problem. It exposes pid_ns_for_children to ns
directory in standard way with the name "pid_for_children":
~# ls /proc/5531/ns -l | grep pid
lrwxrwxrwx 1 root root 0 Jan 14 16:38 pid -> pid:[4026531836]
lrwxrwxrwx 1 root root 0 Jan 14 16:38 pid_for_children -> pid:[4026532286]
This patch (of 2):
Make possible to have link content prefix yyy different from the link
name xxx:
$ readlink /proc/[pid]/ns/xxx
yyy:[4026531838]
This will be used in next patch.
Link: http://lkml.kernel.org/r/149201120318.6007.7362655181033883000.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified
during allyesconfig builds of x86, arm, and arm64, with most initializer
fixes extracted from grsecurity.
Link: http://lkml.kernel.org/r/20170329210419.GA40066@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Coccinelle emits this warning:
WARNING: casting value returned by memory allocation function to (struct proc_inode *) is useless.
Remove unnecessary cast.
Link: http://lkml.kernel.org/r/1487745720-16967-1-git-send-email-me@tobin.cc
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Instead of messing with the commit path which has been causing issues,
add a COMMIT op after the COPY and ask for stable copies in the first
space.
It saves a round trip, since after the COPY, the client sends a COMMIT
anyway.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
As reported by David Jeffery: "a signal was sent to lockd while lockd
was shutting down from a request to stop nfs. The signal causes lockd
to call restart_grace() which puts the lockd_net structure on the grace
list. If this signal is received at the wrong time, it will occur after
lockd_down_net() has called locks_end_grace() but before
lockd_down_net() stops the lockd thread. This leads to lockd putting
the lockd_net structure back on the grace list, then exiting without
anything removing it from the list."
So, perform the final locks_end_grace() from the the lockd thread; this
ensures it's serialized with respect to restart_grace().
Reported-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've focused on enhancing performance with regards to
block allocation, GC, and discard/in-place-update IO controls. There
are a bunch of clean-ups as well as minor bug fixes.
Enhancements:
- disable heap-based allocation by default
- issue small-sized discard commands by default
- change the policy of data hotness for logging
- distinguish IOs in terms of size and wbc type
- start SSR earlier to avoid foreground GC
- enhance data structures managing discard commands
- enhance in-place update flow
- add some more fault injection routines
- secure one more xattr entry
Bug fixes:
- calculate victim cost for GC correctly
- remain correct victim segment number for GC
- race condition in nid allocator and initializer
- stale pointer produced by atomic_writes
- fix missing REQ_SYNC for flush commands
- handle missing errors in more corner cases"
* tag 'for-f2fs-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (111 commits)
f2fs: fix a mount fail for wrong next_scan_nid
f2fs: enhance scalability of trace macro
f2fs: relocate inode_{,un}lock in F2FS_IOC_SETFLAGS
f2fs: Make flush bios explicitely sync
f2fs: show available_nids in f2fs/status
f2fs: flush dirty nats periodically
f2fs: introduce CP_TRIMMED_FLAG to avoid unneeded discard
f2fs: allow cpc->reason to indicate more than one reason
f2fs: release cp and dnode lock before IPU
f2fs: shrink size of struct discard_cmd
f2fs: don't hold cmd_lock during waiting discard command
f2fs: nullify fio->encrypted_page for each writes
f2fs: sanity check segment count
f2fs: introduce valid_ipu_blkaddr to clean up
f2fs: lookup extent cache first under IPU scenario
f2fs: reconstruct code to write a data page
f2fs: introduce __wait_discard_cmd
f2fs: introduce __issue_discard_cmd
f2fs: enable small discard by default
f2fs: delay awaking discard thread
...
|
|
Pull fscrypt updates from Ted Ts'o:
"Only bug fixes and cleanups for this merge window"
* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: correct collision claim for digested names
MAINTAINERS: fscrypt: update mailing list, patchwork, and git
ext4: clean up ext4_match() and callers
f2fs: switch to using fscrypt_match_name()
ext4: switch to using fscrypt_match_name()
fscrypt: introduce helper function for filename matching
fscrypt: avoid collisions when presenting long encrypted filenames
f2fs: check entire encrypted bigname when finding a dentry
ubifs: check for consistent encryption contexts in ubifs_lookup()
f2fs: sync f2fs_lookup() with ext4_lookup()
ext4: remove "nokey" check from ext4_lookup()
fscrypt: fix context consistency check when key(s) unavailable
fscrypt: Remove __packed from fscrypt_policy
fscrypt: Move key structure and constants to uapi
fscrypt: remove fscrypt_symlink_data_len()
fscrypt: remove unnecessary checks for NULL operations
|
|
Pull ext4 updates from Ted Ts'o:
- add GETFSMAP support
- some performance improvements for very large file systems and for
random write workloads into a preallocated file
- bug fixes and cleanups.
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: cleanup write flags handling from jbd2_write_superblock()
ext4: mark superblock writes synchronous for nobarrier mounts
ext4: inherit encryption xattr before other xattrs
ext4: replace BUG_ON with WARN_ONCE in ext4_end_bio()
ext4: avoid unnecessary transaction stalls during writeback
ext4: preload block group descriptors
ext4: make ext4_shutdown() static
ext4: support GETFSMAP ioctls
vfs: add common GETFSMAP ioctl definitions
ext4: evict inline data when writing to memory map
ext4: remove ext4_xattr_check_entry()
ext4: rename ext4_xattr_check_names() to ext4_xattr_check_entries()
ext4: merge ext4_xattr_list() into ext4_listxattr()
ext4: constify static data that is never modified
ext4: trim return value and 'dir' argument from ext4_insert_dentry()
jbd2: fix dbench4 performance regression for 'nobarrier' mounts
jbd2: Fix lockdep splat with generic/270 test
mm: retry writepages() on ENOMEM when doing an data integrity writeback
|
|
When using NFS4_CREATE_EXCLUSIVE4_1 mode, the client will overestimate the
amount of space that it needs for the attributes because it does so
before checking whether or not the server supports a given attribute.
Fix by checking the attribute mask earlier.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
The intention in the original patch was to release the lock when
we put the inode, however something got screwed up.
Reported-by: Jason Yan <yanaijie@huawei.com>
Fixes: 7b410d9ce460f ("pNFS: Delay getting the layout header in..")
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Pull cifs fixes from Steve French:
"Various fixes for stable for CIFS/SMB3 especially for better
interoperability for SMB3 to Macs.
It also includes Pavel's improvements to SMB3 async i/o support
(which is much faster now)"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: add misssing SFM mapping for doublequote
SMB3: Work around mount failure when using SMB3 dialect to Macs
cifs: fix CIFS_IOC_GET_MNT_INFO oops
CIFS: fix mapping of SFM_SPACE and SFM_PERIOD
CIFS: fix oplock break deadlocks
cifs: fix CIFS_ENUMERATE_SNAPSHOTS oops
cifs: fix leak in FSCTL_ENUM_SNAPS response handling
Set unicode flag on cifs echo request to avoid Mac error
CIFS: Add asynchronous write support through kernel AIO
CIFS: Add asynchronous read support through kernel AIO
CIFS: Add asynchronous context to support kernel AIO
cifs: fix IPv6 link local, with scope id, address parsing
cifs: small underflow in cnvrtDosUnixTm()
|
|
Pull xfs updates from Darrick Wong:
"Here are the XFS changes for 4.12. The big new feature for this
release is the new space mapping ioctl that we've been discussing
since LSF2016, but other than that most of the patches are larger bug
fixes, memory corruption prevention, and other cleanups.
Summary:
- various code cleanups
- introduce GETFSMAP ioctl
- various refactoring
- avoid dio reads past eof
- fix memory corruption and other errors with fragmented directory blocks
- fix accidental userspace memory corruptions
- publish fs uuid in superblock
- make fstrim terminatable
- fix race between quotaoff and in-core inode creation
- avoid use-after-free when finishing up w/ buffer heads
- reserve enough space to handle bmap tree resizing during cow remap"
* tag 'xfs-4.12-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (53 commits)
xfs: fix use-after-free in xfs_finish_page_writeback
xfs: reserve enough blocks to handle btree splits when remapping
xfs: wait on new inodes during quotaoff dquot release
xfs: update ag iterator to support wait on new inodes
xfs: support ability to wait on new inodes
xfs: publish UUID in struct super_block
xfs: Allow user to kill fstrim process
xfs: better log intent item refcount checking
xfs: fix up quotacheck buffer list error handling
xfs: remove xfs_trans_ail_delete_bulk
xfs: don't use bool values in trace buffers
xfs: fix getfsmap userspace memory corruption while setting OF_LAST
xfs: fix __user annotations for xfs_ioc_getfsmap
xfs: corruption needs to respect endianess too!
xfs: use NULL instead of 0 to initialize a pointer in xfs_ioc_getfsmap
xfs: use NULL instead of 0 to initialize a pointer in xfs_getfsmap
xfs: simplify validation of the unwritten extent bit
xfs: remove unused values from xfs_exntst_t
xfs: remove the unused XFS_MAXLINK_1 define
xfs: more do_div cleanups
...
|
|
Pull block fixes and updates from Jens Axboe:
"Some fixes and followup features/changes that should go in, in this
merge window. This contains:
- Two fixes for lightnvm from Javier, fixing problems in the new code
merge previously in this merge window.
- A fix from Jan for the backing device changes, fixing an issue in
NFS that causes a failure to mount on certain setups.
- A change from Christoph, cleaning up the blk-mq init and exit
request paths.
- Remove elevator_change(), which is now unused. From Bart.
- A fix for queue operation invocation on a dead queue, from Bart.
- A series fixing up mtip32xx for blk-mq scheduling, removing a
bandaid we previously had in place for this. From me.
- A regression fix for this series, fixing a case where we wait on
workqueue flushing from an invalid (non-blocking) context. From me.
- A fix/optimization from Ming, ensuring that we don't both quiesce
and freeze a queue at the same time.
- A fix from Peter on lock ordering for CPU hotplug. Not a real
problem right now, but will be once the CPU hotplug rework goes in.
- A series from Omar, cleaning up out blk-mq debugfs support, and
adding support for exporting info from schedulers in debugfs as
well. This is really useful in debugging stalls or livelocks. From
Omar"
* 'for-linus' of git://git.kernel.dk/linux-block: (28 commits)
mq-deadline: add debugfs attributes
kyber: add debugfs attributes
blk-mq-debugfs: allow schedulers to register debugfs attributes
blk-mq: untangle debugfs and sysfs
blk-mq: move debugfs declarations to a separate header file
blk-mq: Do not invoke queue operations on a dead queue
blk-mq-debugfs: get rid of a bunch of boilerplate
blk-mq-debugfs: rename hw queue directories from <n> to hctx<n>
blk-mq-debugfs: don't open code strstrip()
blk-mq-debugfs: error on long write to queue "state" file
blk-mq-debugfs: clean up flag definitions
blk-mq-debugfs: separate flags with |
nfs: Fix bdi handling for cloned superblocks
block/mq: Cure cpu hotplug lock inversion
lightnvm: fix bad back free on error path
lightnvm: create cmd before allocating request
blk-mq: don't use sync workqueue flushing from drivers
mtip32xx: convert internal commands to regular block infrastructure
mtip32xx: cleanup internal tag assumptions
block: don't call blk_mq_quiesce_queue() after queue is frozen
...
|
Linus Torvalds
Trond Myklebust
J. Bruce Fields
Ari Kauppi
Ross Zwisler
Stephen Rothwell
Deepa Dinamani
Tetsuo Handa
Masahiro Yamada
Michal Hocko
Kirill Tkhai
Kees Cook
Tobin C. Harding
Olga Kornievskaia