aboutsummaryrefslogtreecommitdiffstats
path: root/fs (follow)
AgeCommit message (Collapse)AuthorFilesLines
2006-09-27[PATCH] Really ignore kmem_cache_destroy return valueAlexey Dobriyan33-107/+42
* Rougly half of callers already do it by not checking return value * Code in drivers/acpi/osl.c does the following to be sure: (void)kmem_cache_destroy(cache); * Those who check it printk something, however, slab_error already printed the name of failed cache. * XFS BUGs on failed kmem_cache_destroy which is not the decision low-level filesystem driver should make. Converted to ignore. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] fs: Removing useless castsPanagiotis Issaris21-48/+37
* Removing useless casts * Removing useless wrapper * Conversion from kmalloc+memset to kzalloc Signed-off-by: Panagiotis Issaris <takis@issaris.org> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] fs: Conversions from kmalloc+memset to k(z|c)allocPanagiotis Issaris35-84/+43
Conversions from kmalloc+memset to kzalloc. Signed-off-by: Panagiotis Issaris <takis@issaris.org> Jffs2-bit-acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] more ext3 16T overflow fixesEric Sandeen2-6/+23
Some of the changes in balloc.c are just cosmetic, as Andreas pointed out - if they overflow they'll then underflow and things are fine. 5th hunk actually fixes an overflow problem. Also check for potential overflows in inode & block counts when resizing. Signed-off-by: Eric Sandeen <esandeen@redhat.com> Cc: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] ext3: Fix sparse warningsDave Kleikamp3-14/+13
Fixing up some endian-ness warnings in preparation to clone ext4 from ext3. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] ext3: More whitespace cleanupsDave Kleikamp11-41/+41
More white space cleanups in preparation of cloning ext4 from ext3. Removing spaces that precede a tab. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] ext3: wrong error behaviorVasily Averin1-5/+6
SWsoft Virtuozzo/OpenVZ Linux kernel team has discovered that ext3 error behavior was broken in linux kernels since 2.5.x versions by the following patch: 2002/10/31 02:15:26-05:00 tytso@snap.thunk.org Default mount options from superblock for ext2/3 filesystems http://linux.bkbits.net:8080/linux-2.6/gnupatch@3dc0d88eKbV9ivV4ptRNM8fBuA3JBQ In case ext3 file system is mounted with errors=continue (EXT3_ERRORS_CONTINUE) errors should be ignored when possible. However at present in case of any error kernel aborts journal and remounts filesystem to read-only. Such behavior was hit number of times and noted to differ from that of 2.4.x kernels. This patch fixes this: - do nothing in case of EXT3_ERRORS_CONTINUE, - set EXT3_MOUNT_ABORT and call journal_abort() in all other cases - panic() should be called after ext3_commit_super() to save sb marked as EXT3_ERROR_FS Signed-off-by: Vasily Averin <vvs@sw.ru> Acked-by: Kirill Korotaev <dev@sw.ru> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Stephen C. Tweedie" <sct@redhat.com> Cc: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] ext3: more comments about block allocation/reservation codeMingming Cao1-45/+247
Signed-off-by: Mingming Cao <cmm@us.ibm.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] ext3: turn on reservation dump on block allocation errorsMingming Cao1-4/+8
In the past there were a few kernel panics related to block reservation tree operations failure (insert/remove etc). It would be very useful to get the block allocation reservation map info when such error happens. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] JBD: 16T fixesEric Sandeen1-3/+3
These are a few places I've found in jbd that look like they may not be 16T-safe, or consistent with the use of unsigned longs for block containers. Problems here would be somewhat hard to hit, would require journal blocks past the 8T boundary, which would not be terribly common. Still, should fix. (some of these have come from the ext4 work on jbd as well). I think there's one more possibility that the wrap() function may not be safe IF your last block in the journal butts right up against the 232 block boundary, but that seems like a VERY remote possibility, and I'm not worrying about it at this point. Signed-off-by: Eric Sandeen <esandeen@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] ext3: inode numbers are unsigned longEric Sandeen5-26/+27
This is primarily format string fixes, with changes to ialloc.c where large inode counts could overflow, and also pass around journal_inum as an unsigned long, just to be pedantic about it.... Signed-off-by: Eric Sandeen <esandeen@redhat.com> Cc: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] ext2: fix mounts at 16TEric Sandeen1-13/+19
Signed-off-by: Eric Sandeen <esandeen@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] fix ext3 mounts at 16TEric Sandeen1-15/+19
I need to do some actual IO testing now, but this gets things mounting for a 16T ext3 filesystem. (patched up e2fsprogs is needed too, I'll send that off the kernel list) This patch fixes these issues in the kernel: o sbi->s_groups_count overflows in ext3_fill_super() sbi->s_groups_count = (le32_to_cpu(es->s_blocks_count) - le32_to_cpu(es->s_first_data_block) + EXT3_BLOCKS_PER_GROUP(sb) - 1) / EXT3_BLOCKS_PER_GROUP(sb); at 16T, s_blocks_count is already maxed out; adding EXT3_BLOCKS_PER_GROUP(sb) overflows it and groups_count comes out to 0. Not really what we want, and causes a failed mount. Feel free to check my math (actually, please do!), but changing it this way should work & avoid the overflow: (A + B - 1)/B changed to: ((A - 1)/B) + 1 o ext3_check_descriptors() overflows range checks ext3_check_descriptors() iterates over all block groups making sure that various bits are within the right block ranges... on the last pass through, it is checking the error case [item] >= block + EXT3_BLOCKS_PER_GROUP(sb) where "block" is the first block in the last block group. The last block in this group (and the last one that will fit in 32 bits) is block + EXT3_BLOCKS_PER_GROUP(sb)- 1. block + EXT3_BLOCKS_PER_GROUP(sb) wraps back around to 0. so, make things clearer with "first_block" and "last_block" where those are first and last, inclusive, and use <, > rather than <, >=. Finally, the last block group may be smaller than the rest, so account for this on the last pass through: last_block = sb->s_blocks_count - 1; (a similar patch could be done for ext2; does anyone in their right mind use ext2 at 16T? I'll send an ext2 patch doing the same thing if that's warranted) Signed-off-by: Eric Sandeen <esandeen@redhat.com> Cc: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] jbd: use BUILD_BUG_ON in journal initAlexey Dobriyan1-7/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Stephen Tweedie <sct@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] ext3 and jbd cleanup: remove whitespaceMingming Cao15-274/+274
Remove whitespace from ext3 and jbd, before we clone ext4. Signed-off-by: Mingming Cao<cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] jbd: add lock annotation to jbd_sync_bhJosh Triplett1-0/+1
jbd_sync_bh releases journal->j_list_lock. Add a lock annotation to this function so that sparse can check callers for lock pairing, and so that sparse will not complain about this function since it intentionally uses the lock in this manner. Signed-off-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds2-3/+5
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (225 commits) [PATCH] Don't set calgary iommu as default y [PATCH] i386/x86-64: New Intel feature flags [PATCH] x86: Add a cumulative thermal throttle event counter. [PATCH] i386: Make the jiffies compares use the 64bit safe macros. [PATCH] x86: Refactor thermal throttle processing [PATCH] Add 64bit jiffies compares (for use with get_jiffies_64) [PATCH] Fix unwinder warning in traps.c [PATCH] x86: Allow disabling early pci scans with pci=noearly or disallowing conf1 [PATCH] x86: Move direct PCI scanning functions out of line [PATCH] i386/x86-64: Make all early PCI scans dependent on CONFIG_PCI [PATCH] Don't leak NT bit into next task [PATCH] i386/x86-64: Work around gcc bug with noreturn functions in unwinder [PATCH] Fix some broken white space in ia32_signal.c [PATCH] Initialize argument registers for 32bit signal handlers. [PATCH] Remove all traces of signal number conversion [PATCH] Don't synchronize time reading on single core AMD systems [PATCH] Remove outdated comment in x86-64 mmconfig code [PATCH] Use string instructions for Core2 copy/clear [PATCH] x86: - restore i8259A eoi status on resume [PATCH] i386: Split multi-line printk in oops output. ...
2006-09-26Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds8-61/+62
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (47 commits) Driver core: Don't call put methods while holding a spinlock Driver core: Remove unneeded routines from driver core Driver core: Fix potential deadlock in driver core PCI: enable driver multi-threaded probe Driver Core: add ability for drivers to do a threaded probe sysfs: add proper sysfs_init() prototype drivers/base: check errors drivers/base: Platform notify needs to occur before drivers attach to the device v4l-dev2: handle __must_check add CONFIG_ENABLE_MUST_CHECK add __must_check to device management code Driver core: fixed add_bind_files() definition Driver core: fix comments in drivers/base/power/resume.c sysfs_remove_bin_file: no return value, dump_stack on error kobject: must_check fixes Driver core: add ability for devices to create and remove bin files Class: add support for class interfaces for devices Driver core: create devices/virtual/ tree Driver core: add device_rename function Driver core: add ability for classes to handle devices properly ...
2006-09-26[PATCH] binfmt_elf: consistently use loff_tAndrew Morton1-5/+5
As David Howells <dhowells@redhat.com> points out, binfmt_elf sometimes uses off_t, sometimes uses loff_t. Use loff_t throughout. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] ZVC: Support NR_SLAB_RECLAIMABLE / NR_SLAB_UNRECLAIMABLEChristoph Lameter1-1/+6
Remove the atomic counter for slab_reclaim_pages and replace the counter and NR_SLAB with two ZVC counter that account for unreclaimable and reclaimable slab pages: NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE. Change the check in vmscan.c to refer to to NR_SLAB_RECLAIMABLE. The intend seems to be to check for slab pages that could be freed. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] reduce MAX_NR_ZONES: make display of highmem counters conditional on CONFIG_HIGHMEMChristoph Lameter1-0/+4
Do not display HIGHMEM memory sizes if CONFIG_HIGHMEM is not set. Make HIGHMEM dependent texts and make display of highmem counters optional Some texts are depending on CONFIG_HIGHMEM. Remove those strings and remove the display of highmem counter values if CONFIG_HIGHMEM is not set. [akpm@osdl.org: remove some ifdefs] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] mm: tracking shared dirty pagesPeter Zijlstra1-1/+1
Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] jbd: fix commit of ordered data buffersJan Kara1-69/+113
Original commit code assumes, that when a buffer on BJ_SyncData list is locked, it is being written to disk. But this is not true and hence it can lead to a potential data loss on crash. Also the code didn't count with the fact that journal_dirty_data() can steal buffers from committing transaction and hence could write buffers that no longer belong to the committing transaction. Finally it could possibly happen that we tried writing out one buffer several times. The patch below tries to solve these problems by a complete rewrite of the data commit code. We go through buffers on t_sync_datalist, lock buffers needing write out and store them in an array. Buffers are also immediately refiled to BJ_Locked list or unfiled (if the write out is completed). When the array is full or we have to block on buffer lock, we submit all accumulated buffers for IO. [suitable for 2.6.18.x around the 2.6.19-rc2 timeframe] Signed-off-by: Jan Kara <jack@suse.cz> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] Check return value of copy_to_user in compat_sys_pselect7Andi Kleen1-2/+3
Fix linux/fs/compat.c: In function compat_sys_pselect7 linux/fs/compat.c:1869: warning: ignoring return value of copy_to_user, declared with attribute warn_unused_result To make it easier to handle I changed to semantics to not try to write out a timespec if an error occurred. I hope that's ok. Cc: dwmw2@infradead.org Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] i386/x86-64: Don't randomize stack top when no randomization personality is setAndi Kleen1-1/+2
Based on patch from Frank van Maarseveen <frankvm@frankvm.com>, but extended. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-25sysfs: add proper sysfs_init() prototypeAndrew Morton1-9/+1
Don't be crufty. Mark it __must_check too. Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-25sysfs_remove_bin_file: no return value, dump_stack on errorRandy.Dunlap3-9/+17
Make sysfs_remove_bin_file() void. If it detects an error, printk the file name and call dump_stack(). sysfs_hash_and_remove() now returns an error code indicating its success or failure so that sysfs_remove_bin_file() can know success/failure. Convert the only driver that checked the return value of sysfs_remove_bin_file(). Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-25SYSFS: allow sysfs_create_link to create symlinks in the root of sysfsGreg Kroah-Hartman1-2/+12
This is needed to make the compatible link for /sys/block in the future. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-25Debugfs: kernel-doc fixes for debugfsRandy Dunlap2-40/+31
Fix kernel-doc and typos/spellos in fs/debugfs/. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-25sysfs: Make poll behaviour consistentJuha Yrjölä1-1/+1
When no events have been reported by sysfs_notify(), sd->s_events was previously set to zero. The initial value for new readers is also zero, so poll was blocking, regardless of whether the attribute was read by the process or not. Make poll behave consistently by setting the initial value of sd->s_events to non-zero. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-25[PATCH] autofs4: zero timeout prevents shutdownIan Kent1-3/+3
If the timeout of an autofs mount is set to zero then umounts are disabled. This works fine, however the kernel module checks the expire timeout and goes no further if it is zero. This is not the right thing to do at shutdown as the module is passed an option to expire mounts regardless of their timeout setting. This patch allows autofs to honor the force expire option. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-24ocfs2: Teach ocfs2_drop_lock() to use ->set_lvb() callbackMark Fasheh1-31/+28
With this, we don't need to pass an additional struct with function pointer. Now that the callbacks are fully used, comment the remaining API. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: Remove ->unblock lockres operationMark Fasheh1-146/+6
Have ocfs2_process_blocked_lock() call ocfs2_generic_unblock_lock(), which gets to be ocfs2_unblock_lock() now that it's the only possible unblock function. Remove the ->unblock() callback from the structure, and all lock type specific unblock functions. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: move downconvert worker to lockres opsMark Fasheh1-18/+32
This way lock types don't have to manually pass it to ocfs2_generic_unblock_lock(). Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: Remove unused dlmglue functionsMark Fasheh1-103/+0
The meta data unblocking code no longer needs ocfs2_do_unblock_meta() or ocfs2_can_downconvert_meta_lock(), so remove them. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: Have the metadata lock use generic dlmglue functionsMark Fasheh1-1/+31
Fill in the ->check_downconvert and ->set_lvb callbacks with meta data specific operations and switch ocfs2_unblock_meta() to call ocfs2_generic_unblock_lock() Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: Add ->set_lvb callback in dlmglueMark Fasheh1-2/+29
This allows a lock type to set the value block before downconvert. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: Add ->check_downconvert callback in dlmglueMark Fasheh1-1/+18
This will allow lock types to force a requeue of a lock downconvert. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: Check for refreshing locks in generic unblock functionMark Fasheh1-12/+19
Tidy up the exit path a bit too. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: don't unconditionally pass LVB flagsMark Fasheh1-3/+15
Allow a lock type to specifiy whether it makes use of the LVB. The only type which does this right now is the meta data lock. This should save us some space on network messages since they won't have to needlessly transmit value blocks. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: combine inode and generic blocking AST functionsMark Fasheh1-112/+11
There is extremely little difference between the two now. We can remove the callback from ocfs2_lock_res_ops as well. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: Add ->get_osb() dlmglue locking operationMark Fasheh1-0/+33
Will be used to find the ocfs2_super structure from a given lockres. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: remove ->unlock_ast() callback from ocfs2_lock_res_opsMark Fasheh1-13/+3
This was always defined to the same function in all locks, so clean things up by removing and passing ocfs2_unlock_ast() directly to the DLM. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: combine inode and generic AST functionsMark Fasheh1-110/+10
There is extremely little difference between the two now. We can remove the callback from ocfs2_lock_res_ops as well. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: Clean up lock resource refresh flagsMark Fasheh1-14/+35
Use of the refresh mechanism is lock-type wide, so move knowledge of that to the ocfs2_lock_res_ops structure. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: Remove i_generation from inode lock namesMark Fasheh10-53/+170
OCFS2 puts inode meta data in the "lock value block" provided by the DLM. Typically, i_generation is encoded in the lock name so that a deleted inode on and a new one in the same block don't share the same lvb. Unfortunately, that scheme means that the read in ocfs2_read_locked_inode() is potentially thrown away as soon as the meta data lock is taken - we cannot encode the lock name without first knowing i_generation, which requires a disk read. This patch encodes i_generation in the inode meta data lvb, and removes the value from the inode meta data lock name. This way, the read can be covered by a lock, and at the same time we can distinguish between an up to date and a stale LVB. This will help cold-cache stat(2) performance in particular. Since this patch changes the protocol version, we take the opportunity to do a minor re-organization of two of the LVB fields. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: Encode i_generation in the meta data lvbMark Fasheh2-7/+12
When i_generation is removed from the lockname, this will help us determine whether a meta data lvb has information that is in sync with the local struct inode. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: Free up some space in the lvbMark Fasheh2-4/+6
lvb_version doesn't need to be a whole 32 bits. Make it an 8 bit field to free up some space. This should be backwards compatible until we use one of the fields, in which case we'd bump the lvb version anyway. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: Remove special casing for inode creation in ocfs2_dentry_attach_lock()Mark Fasheh3-37/+14
We can't use LKM_LOCAL for new dentry locks because an unlink and subsequent re-create of a name/inode pair may result in the lock still being mastered somewhere in the cluster. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-09-24ocfs2: manually d_move() during ocfs2_rename()Mark Fasheh2-2/+5
Make use of FS_RENAME_DOES_D_MOVE to avoid a race condition that can occur during ->rename() if we d_move() outside of the parent directory cluster locks, and another node discovers the new name (created during the rename) and unlinks it. d_move() will unconditionally rehash a dentry - which will leave stale data in the system. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.