aboutsummaryrefslogtreecommitdiffstats
path: root/fs (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-12-05drm: Add helper iterator functions for plane fb_damage_clips blobDeepak Rawat3-1/+147
With fb_damage_clips blob property in drm_plane_state, this patch adds helper iterator to traverse the damage clips that lie inside plane src. Iterator will return full plane src as damage in case need full plane update or damage is not specified. v2: - Plane src clipping correction - Handle no plane update case in iter_next Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-12-05drm: Add a new helper to validate damage during atomic_checkDeepak Rawat3-0/+40
This helper function makes sure that damage from plane state is discarded for full modeset. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-12-05drm: Add a new plane property to send damage during plane updateLukasz Spintzyk10-1/+244
FB_DAMAGE_CLIPS is an optional plane property to mark damaged regions on the plane in framebuffer coordinates of the framebuffer attached to the plane. The layout of blob data is simply an array of "struct drm_mode_rect". Unlike plane src coordinates, damage clips are not in 16.16 fixed point. As plane src in framebuffer cannot be negative so are damage clips. In damage clip, x1/y1 are inclusive and x2/y2 are exclusive. This patch also exports the kernel internal drm_rect to userspace as drm_mode_rect. This is because "struct drm_clip_rect" is not sufficient to represent damage for current plane size. Driver which are interested in enabling FB_DAMAGE_CLIPS property for a plane should enable this property using drm_plane_enable_damage_clips. v2: - Input validation on damage clips against framebuffer size. - Doc update, other minor changes. Signed-off-by: Lukasz Spintzyk <lukasz.spintzyk@displaylink.com> Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-11-30Documentation: drm: Remove dangling pointer from drm-mm.rstSean Paul1-3/+0
Fixes htmldocs build error: Error: Cannot open file ../drivers/gpu/drm/drm_global.c Fixes: 2bb42410b1bd ("drm: Remove drm_global.{c,h} v2") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Christian König <christian.koenig@amd.com> Cc: Junwei Zhang <Jerry.Zhang@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181129155522.33749-1-sean@poorly.run
2018-11-27drm/vkms: Drop custom vkms_dumb_map().Eric Anholt3-30/+0
This is the same as the default drm_gem_dumb_map_offset() implementation, except that this one missed the ban on userspace mapping an imported dmabuf (which seems like intended common behavior for drivers). Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181126215929.20546-1-eric@anholt.net Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-11-27drm/v3d: Clean up the reservation object setup.Eric Anholt1-22/+11
The extra to_v3d_bo() calls came from copying this from the vc4 driver, which stored the cma gem object in the structs. v2: Fix an unused var warning Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181108161654.19888-4-eric@anholt.net Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> (v1)
2018-11-27drm/v3d: Update a comment about what uses v3d_job_dependency().Eric Anholt1-1/+1
I merged bin and render's paths in a late refactoring. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181108161654.19888-3-eric@anholt.net Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-11-27drm/v3d: Fix whitespace inconsistency in the header.Eric Anholt1-2/+2
Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181108161654.19888-2-eric@anholt.net Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-11-27drm/meson: Add support for VIC alternate timingsNeil Armstrong3-52/+89
This change is an attempt to handle the alternate clock for the CEA mode. 60Hz vs. 59.94Hz, 30Hz vs 29.97Hz or 24Hz vs 23.97Hz on the Amlogic Meson SoC DRM Driver pixel clock generation. The actual clock generation will be moved to the Common Clock framework once all the video clock are handled by the Amlogic Meson SoC clock driver, then these alternate timings will be handled in the same time in a cleaner fashion. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com> [narmstrong: fix maybe-uninitialized warnings after applying] Link: https://patchwork.freedesktop.org/patch/msgid/1541501675-3928-1-git-send-email-narmstrong@baylibre.com
2018-11-27drm/meson: Add HDMI 1.4 4k modesNeil Armstrong1-0/+129
Add the timings for the HDMI 1.4 4K modes support : - 3840x2160@30 - 3840x2160@25 - 3840x2160@24 Since the 297000Hz pixel clock is already managed and the modes are compatible with the HDMI 1.4 current HDMI PHY+Controller support, only the missing timings values needs to be added. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1541496909-19625-1-git-send-email-narmstrong@baylibre.com
2018-11-27drm: Improve dumb callback docsDaniel Vetter3-3/+18
Noticed while reviewing a patch from Eric. Also add a todo for the dumb_map_offset callbacks (it should be simple to do, but piles of work). Plus fix up vbox, because vbox. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Fabio Rafael da Rosa <fdr@pid42.net> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181127091921.8325-1-daniel.vetter@ffwll.ch
2018-11-27drm/sun4i: Pass modifier to backend and frontend format support helpersPaul Kocialkowski4-6/+13
To prepare the introduction of tiled mode support, pass the framebuffer format modifier to the helpers dealing with format support. Since only linear mode is supported for now, add corresponding checks in each helper. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-33-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: frontend: Add support for the BGRX8888 output formatPaul Kocialkowski2-0/+5
This introduces support for the BGRX8888 output format for the frontend, with its associated output format value definition. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-23-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: Make pitch even for GEM dumb alloc as per hardware constraintPaul Kocialkowski1-1/+11
Our hardware requires the pitch to be an even number when using YUV formats with the frontend. Implement a driver-specific callback for GEM dumb allocation that sets the pitch accordingly. Since only the bpp is passed (and not the format), we cannot really distinguish if this alignment is really required. Since it doesn't hurt to align the pitch anyway, always do it. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-30-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: frontend: Apply format sub-sampling to CH1 dimensionsPaul Kocialkowski1-8/+16
The frontend comes with two "channels", that can be configured independently. When used in YUV mode, the first channel (CH0) represents the luminance component while the second channel (CH1) represents the chrominance. In RGB mode, both have to be configured the same way. Use variables (with the YUV terminology) for each channel's dimensions, calculating the chroma dimensions from the luma dimensions and the sub-sampling factors from the format description. Since the configured size only has pixel precision, the fractional fixed-point part of the source size is dropped for both components to ensure that the scaling factors are accurate. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-26-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: backend: Detail the YUV to RGB values coding explanationPaul Kocialkowski1-2/+6
The values in the BT601 YUV to RGB colorspace translation are not simply coded as multiples, but rather as fixed-point signed fractional values on a given number of bits. Add an explanation about that. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-24-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: frontend: Add support for the BGRX8888 input formatPaul Kocialkowski3-0/+7
This introduces support for the BGRX8888 input format for the frontend, with its associated pixel sequence value definition. Other fields are already configured correctly as they no longer depend on the format's fourcc directly. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-22-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: frontend: Determine input mode based on the number of planesPaul Kocialkowski1-6/+4
Use the number of planes associated with the DRM format to determine the input mode configuration instead of the format iteself. This way, the helper can be used for all packed formats without future changes. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-20-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: frontend: Add proper definitions for format registersPaul Kocialkowski2-12/+10
This introduces proper definitions for the input and output format configuration registers instead of a macro and raw values in the code, with the intent to increase code readability and reduce indirections. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-19-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: frontend: Add helpers for input data mode and pixel sequencePaul Kocialkowski1-5/+41
This introduces new helpers for retrieving the input data mode and pixel sequence register field values based on the DRM format instead of hardcoding these. This makes it easier to add support for more formats. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-18-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: frontend: Move CSC bypass setup to format update routinePaul Kocialkowski1-4/+4
In order to support YUV to RGB conversion with the frontend (which is generally used for connecting with the backend), the CSC block must not be bypassed. As a result, the bit to enable CSC bypass is moved from the runtime resume routine to the format update routine, so that it can disabled when introducing support for YUV formats later. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-17-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: Rename sun4i_backend_layer_formats to sun4i_layer_formatsPaul Kocialkowski1-3/+3
Since more formats can be supported by the frontend, rename the variable listing the layer formats to avoid suggesting that the backend itself supports all the listed formats. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-16-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: backend: Avoid counting YUV planes that use the frontendPaul Kocialkowski1-5/+5
Our hardware has a limited number of YUV planes (usually 1) that can be supported using the backend only. However, YUV planes can also be supported by the frontend and must then not be counted when checking for that limitation. Only count the YUV plane when the frontend is not used. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-15-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: backend: Use a specific function to check if a plane is supportedPaul Kocialkowski1-5/+22
Before this patch, it is assumed that a plane is supported either through the frontend or through the backend alone. However, the DRM interface does not allow finely reporting our hardware capabilities and there are cases where neither are support. In particular, some plane formats are supported by the backend and not the frontend, so they can only be supported without scaling. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-8-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: backend: Refine the logic behind using the frontendPaul Kocialkowski1-2/+18
Checking that scaling is in use is not sufficient as a condition to decide to use the frontend. Since not all layer formats are supported by the frontend, we need to check for that support first. Then, the frontend must only be enabled if the backend doesn't support the format or that scaling is required. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-7-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: frontend: Add a helper and a list for supported formatsPaul Kocialkowski2-0/+17
In order to check whether the frontend supports a specific format, an explicit list and a related helper are introduced. Just like in the backend, the prototype of the helper is added to the frontend header so that it can be used later on. The helper is also exported because it will be used outside of the frontend module. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-6-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: backend: Add a helper and a list for supported formatsPaul Kocialkowski2-0/+28
In order to check whether the backend supports a specific format, an explicit list and a related helper are introduced. The prototype of this helper is added to the header so that it can be called from sun4i_layer later (when introducing tiled mode support). Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-5-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: Add TODO comment about supporting scaling with the backendPaul Kocialkowski1-0/+5
The backend allows integer-only scaling but can handle alpha components, unlike the frontend. It could be useful to add support for this eventually, so add a short TODO comment describing the situation. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-4-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: frontend: Replace ARGB with XRGB as supported formatPaul Kocialkowski2-4/+3
The frontend documentation (for the A33) mentions that ARGB is supported as output, but with the alpha component always set to 0xff. In practice, this means that the alpha component cannot be preserved when going through the frontend. Since the information is lost, ARGB is not properly supported. As a result, expose the matching format supported by the frontend (both for input and output) as XRGB instead of ARGB. Since ARGB was the selected format for connecting the frontend to the backend, change it to XRGB to reflect this as well. The A31 and A80 SoCs apparently have a bit to enable proper alpha, but this is not supported at this point (see the comment already in the code). Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-3-paul.kocialkowski@bootlin.com
2018-11-27drm/sun4i: Cleanup video/YUV source before enabling a layerPaul Kocialkowski3-0/+13
This adds a dedicated function for cleaning the video and YUV source channel layer enable bits. This function is called first on layer atomic update to make sure that there are no leftover bits from previous plane configuration that were not cleaned until now. It fixes issues when alternating between video and YUV planes, where both bits would be set eventually, leading to broken plane display. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-2-paul.kocialkowski@bootlin.com
2018-11-25Linux 4.20-rc4Linus Torvalds1-2/+2
2018-11-25MAINTAINERS: change Sparse's maintainerLuc Van Oostenryck2-2/+5
I'm taking over the maintainance of Sparse so add myself as maintainer and move Christopher's info to CREDITS. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-24docs: drm: remove no longer relevant TODO entryFernando Ramos1-17/+0
This entry asked to rename all drm core "*_reference/_unrefence" functions to "*_get/_put". Now that this task is complete, we can remove this entry from the TODO list. Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-10-greenfoo@gluegarage.com
2018-11-24drm: remove no longer needed drm-get-put coccinelle scriptFernando Ramos1-78/+0
The coccinelle script was used to rename some (deprecated) functions which no longer exist now. Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-9-greenfoo@gluegarage.com
2018-11-24drm: remove deprecated "drm_framebuffer_[un]reference" functionsFernando Ramos1-24/+0
There are no more places where this (deprecated) function is being used from, thus it can now be removed. Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-8-greenfoo@gluegarage.com
2018-11-24drm: remove deprecated "drm_connector_[un]reference" functionsFernando Ramos1-24/+0
There are no more places where this (deprecated) function is being used from, thus it can now be removed. Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-7-greenfoo@gluegarage.com
2018-11-24drm: replace "drm_connector_unreference" with "drm_connector_put"Fernando Ramos1-1/+1
This patch unifies the naming of DRM functions for reference counting as requested on Documentation/gpu/todo.rst Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-6-greenfoo@gluegarage.com
2018-11-24drm: remove deprecated "drm_dev_unref" functionFernando Ramos2-14/+0
There are no more places where this (deprecated) function is being used from, thus it can now be removed. Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-5-greenfoo@gluegarage.com
2018-11-24drm: replace "drm_dev_unref" function with "drm_dev_put"Fernando Ramos6-11/+11
This patch unifies the naming of DRM functions for reference counting as requested on Documentation/gpu/todo.rst Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-4-greenfoo@gluegarage.com
2018-11-24drm: remove deprecated "[__]drm_gem_object_[un]reference[_locked]" functionsFernando Ramos1-50/+0
There are no more places where these (deprecated) functions are being used from, thus they can now be removed. Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-3-greenfoo@gluegarage.com
2018-11-23net: gemini: Fix copy/paste errorAndreas Fiedler1-1/+1
The TX stats should be started with the tx_stats_syncp, there seems to be a copy/paste error in the driver. Signed-off-by: Andreas Fiedler <andreas.fiedler@gmx.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: phy: mscc: fix deadlock in vsc85xx_default_configQuentin Schulz1-9/+5
The vsc85xx_default_config function called in the vsc85xx_config_init function which is used by VSC8530, VSC8531, VSC8540 and VSC8541 PHYs mistakenly calls phy_read and phy_write in-between phy_select_page and phy_restore_page. phy_select_page and phy_restore_page actually take and release the MDIO bus lock and phy_write and phy_read take and release the lock to write or read to a PHY register. Let's fix this deadlock by using phy_modify_paged which handles correctly a read followed by a write in a non-standard page. Fixes: 6a0bfbbe20b0 ("net: phy: mscc: migrate to phy_select/restore_page functions") Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23dt-bindings: dsa: Fix typo in "probed"Fabio Estevam1-1/+1
The correct form is "can be probed", so fix the typo. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queueLorenzo Bianconi1-1/+3
Reset snd_queue tso_hdrs pointer to NULL in nicvf_free_snd_queue routine since it is used to check if tso dma descriptor queue has been previously allocated. The issue can be triggered with the following reproducer: $ip link set dev enP2p1s0v0 xdpdrv obj xdp_dummy.o $ip link set dev enP2p1s0v0 xdpdrv off [ 341.467649] WARNING: CPU: 74 PID: 2158 at mm/vmalloc.c:1511 __vunmap+0x98/0xe0 [ 341.515010] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018 [ 341.521874] pstate: 60400005 (nZCv daif +PAN -UAO) [ 341.526654] pc : __vunmap+0x98/0xe0 [ 341.530132] lr : __vunmap+0x98/0xe0 [ 341.533609] sp : ffff00001c5db860 [ 341.536913] x29: ffff00001c5db860 x28: 0000000000020000 [ 341.542214] x27: ffff810feb5090b0 x26: ffff000017e57000 [ 341.547515] x25: 0000000000000000 x24: 00000000fbd00000 [ 341.552816] x23: 0000000000000000 x22: ffff810feb5090b0 [ 341.558117] x21: 0000000000000000 x20: 0000000000000000 [ 341.563418] x19: ffff000017e57000 x18: 0000000000000000 [ 341.568719] x17: 0000000000000000 x16: 0000000000000000 [ 341.574020] x15: 0000000000000010 x14: ffffffffffffffff [ 341.579321] x13: ffff00008985eb27 x12: ffff00000985eb2f [ 341.584622] x11: ffff0000096b3000 x10: ffff00001c5db510 [ 341.589923] x9 : 00000000ffffffd0 x8 : ffff0000086868e8 [ 341.595224] x7 : 3430303030303030 x6 : 00000000000006ef [ 341.600525] x5 : 00000000003fffff x4 : 0000000000000000 [ 341.605825] x3 : 0000000000000000 x2 : ffffffffffffffff [ 341.611126] x1 : ffff0000096b3728 x0 : 0000000000000038 [ 341.616428] Call trace: [ 341.618866] __vunmap+0x98/0xe0 [ 341.621997] vunmap+0x3c/0x50 [ 341.624961] arch_dma_free+0x68/0xa0 [ 341.628534] dma_direct_free+0x50/0x80 [ 341.632285] nicvf_free_resources+0x160/0x2d8 [nicvf] [ 341.637327] nicvf_config_data_transfer+0x174/0x5e8 [nicvf] [ 341.642890] nicvf_stop+0x298/0x340 [nicvf] [ 341.647066] __dev_close_many+0x9c/0x108 [ 341.650977] dev_close_many+0xa4/0x158 [ 341.654720] rollback_registered_many+0x140/0x530 [ 341.659414] rollback_registered+0x54/0x80 [ 341.663499] unregister_netdevice_queue+0x9c/0xe8 [ 341.668192] unregister_netdev+0x28/0x38 [ 341.672106] nicvf_remove+0xa4/0xa8 [nicvf] [ 341.676280] nicvf_shutdown+0x20/0x30 [nicvf] [ 341.680630] pci_device_shutdown+0x44/0x88 [ 341.684720] device_shutdown+0x144/0x250 [ 341.688640] kernel_restart_prepare+0x44/0x50 [ 341.692986] kernel_restart+0x20/0x68 [ 341.696638] __se_sys_reboot+0x210/0x238 [ 341.700550] __arm64_sys_reboot+0x24/0x30 [ 341.704555] el0_svc_handler+0x94/0x110 [ 341.708382] el0_svc+0x8/0xc [ 341.711252] ---[ end trace 3f4019c8439959c9 ]--- [ 341.715874] page:ffff7e0003ef4000 count:0 mapcount:0 mapping:0000000000000000 index:0x4 [ 341.723872] flags: 0x1fffe000000000() [ 341.727527] raw: 001fffe000000000 ffff7e0003f1a008 ffff7e0003ef4048 0000000000000000 [ 341.735263] raw: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000 [ 341.742994] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) where xdp_dummy.c is a simple bpf program that forwards the incoming frames to the network stack (available here: https://github.com/altoor/xdp_walkthrough_examples/blob/master/sample_1/xdp_dummy.c) Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support") Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: amd: add missing of_node_put()Yangtao Li1-1/+3
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place doesn't do that, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23team: no need to do team_notify_peers or team_mcast_rejoin when disabling portHangbin Liu1-2/+0
team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin() will send multicast join group message to notify peers. We should do this when enabling/changed to a new port. But it doesn't make sense to do it when a port is disabled. On the other hand, when we set mcast_rejoin_count to 2, and do a failover, team_port_disable() will increase mcast_rejoin.count_pending to 2 and then team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send 4 mcast rejoin messages at latest, which will make user confused. The same with notify_peers.count. Fix it by deleting team_notify_peers() and team_mcast_rejoin() in team_port_disable(). Reported-by: Liang Li <liali@redhat.com> Fixes: fc423ff00df3a ("team: add peer notification") Fixes: 492b200efdd20 ("team: add support for sending multicast rejoins") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23virtio-net: fail XDP set if guest csum is negotiatedJason Wang1-2/+3
We don't support partial csumed packet since its metadata will be lost or incorrect during XDP processing. So fail the XDP set if guest_csum feature is negotiated. Fixes: f600b6905015 ("virtio_net: Add XDP support") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23virtio-net: disable guest csum during XDP setJason Wang1-6/+2
We don't disable VIRTIO_NET_F_GUEST_CSUM if XDP was set. This means we can receive partial csumed packets with metadata kept in the vnet_hdr. This may have several side effects: - It could be overridden by header adjustment, thus is might be not correct after XDP processing. - There's no way to pass such metadata information through XDP_REDIRECT to another driver. - XDP does not support checksum offload right now. So simply disable guest csum if possible in this the case of XDP. Fixes: 3f93522ffab2d ("virtio-net: switch off offloads on demand if possible on XDP set") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net/sched: act_police: add missing spinlock initializationDavide Caratti1-0/+1
commit f2cbd4852820 ("net/sched: act_police: fix race condition on state variables") introduces a new spinlock, but forgets its initialization. Ensure that tcf_police_init() initializes 'tcfp_lock' every time a 'police' action is newly created, to avoid the following lockdep splat: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. <...> Call Trace: dump_stack+0x85/0xcb register_lock_class+0x581/0x590 __lock_acquire+0xd4/0x1330 ? tcf_police_init+0x2fa/0x650 [act_police] ? lock_acquire+0x9e/0x1a0 lock_acquire+0x9e/0x1a0 ? tcf_police_init+0x2fa/0x650 [act_police] ? tcf_police_init+0x55a/0x650 [act_police] _raw_spin_lock_bh+0x34/0x40 ? tcf_police_init+0x2fa/0x650 [act_police] tcf_police_init+0x2fa/0x650 [act_police] tcf_action_init_1+0x384/0x4c0 tcf_action_init+0xf6/0x160 tcf_action_add+0x73/0x170 tc_ctl_action+0x122/0x160 rtnetlink_rcv_msg+0x2a4/0x490 ? netlink_deliver_tap+0x99/0x400 ? validate_linkmsg+0x370/0x370 netlink_rcv_skb+0x4d/0x130 netlink_unicast+0x196/0x230 netlink_sendmsg+0x2e5/0x3e0 sock_sendmsg+0x36/0x40 ___sys_sendmsg+0x280/0x2f0 ? _raw_spin_unlock+0x24/0x30 ? handle_pte_fault+0xafe/0xf30 ? find_held_lock+0x2d/0x90 ? syscall_trace_enter+0x1df/0x360 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x60/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f1841c7cf10 Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24 RSP: 002b:00007ffcf9df4d68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f1841c7cf10 RDX: 0000000000000000 RSI: 00007ffcf9df4dc0 RDI: 0000000000000003 RBP: 000000005bf56105 R08: 0000000000000002 R09: 00007ffcf9df8edc R10: 00007ffcf9df47e0 R11: 0000000000000246 R12: 0000000000671be0 R13: 00007ffcf9df4e84 R14: 0000000000000008 R15: 0000000000000000 Fixes: f2cbd4852820 ("net/sched: act_police: fix race condition on state variables") Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: don't keep lonely packets forever in the gro hashPaolo Abeni1-2/+5
Eric noted that with UDP GRO and NAPI timeout, we could keep a single UDP packet inside the GRO hash forever, if the related NAPI instance calls napi_gro_complete() at an higher frequency than the NAPI timeout. Willem noted that even TCP packets could be trapped there, till the next retransmission. This patch tries to address the issue, flushing the old packets - those with a NAPI_GRO_CB age before the current jiffy - before scheduling the NAPI timeout. The rationale is that such a timeout should be well below a jiffy and we are not flushing packets eligible for sane GRO. v1 -> v2: - clarified the commit message and comment RFC -> v1: - added 'Fixes tags', cleaned-up the wording. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Fixes: 3b47d30396ba ("net: gro: add a per device gro flush timer") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.