aboutsummaryrefslogtreecommitdiffstats
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2021-01-27f2fs: introduce sb_status sysfs nodeChao Yu1-0/+8
Introduce /sys/fs/f2fs/<devname>/stat/sb_status to show superblock status in real time as a hexadecimal value. value sb status macro description 0x1 SBI_IS_DIRTY, /* dirty flag for checkpoint */ 0x2 SBI_IS_CLOSE, /* specify unmounting */ 0x4 SBI_NEED_FSCK, /* need fsck.f2fs to fix */ 0x8 SBI_POR_DOING, /* recovery is doing or not */ 0x10 SBI_NEED_SB_WRITE, /* need to recover superblock */ 0x20 SBI_NEED_CP, /* need to checkpoint */ 0x40 SBI_IS_SHUTDOWN, /* shutdown by ioctl */ 0x80 SBI_IS_RECOVERED, /* recovered orphan/data */ 0x100 SBI_CP_DISABLED, /* CP was disabled last mount */ 0x200 SBI_CP_DISABLED_QUICK, /* CP was disabled quickly */ 0x400 SBI_QUOTA_NEED_FLUSH, /* need to flush quota info in CP */ 0x800 SBI_QUOTA_SKIP_FLUSH, /* skip flushing quota in current CP */ 0x1000 SBI_QUOTA_NEED_REPAIR, /* quota file may be corrupted */ 0x2000 SBI_IS_RESIZEFS, /* resizefs is in process */ Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: fix to use per-inode maxbytesChengguang Xu4-9/+16
F2FS inode may have different max size, e.g. compressed file have less blkaddr entries in all its direct-node blocks, result in being with less max filesize. So change to use per-inode maxbytes. Suggested-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: compress: fix potential deadlockChao Yu3-6/+11
generic/269 reports a hangtask issue, the root cause is ABBA deadlock described as below: Thread A Thread B - down_write(&sbi->gc_lock) -- A - f2fs_write_data_pages - lock all pages in cluster -- B - f2fs_write_multi_pages - f2fs_write_raw_pages - f2fs_write_single_data_page - f2fs_balance_fs - down_write(&sbi->gc_lock) -- A - f2fs_gc - do_garbage_collect - ra_data_block - pagecache_get_page -- B To fix this, it needs to avoid calling f2fs_balance_fs() if there is still cluster pages been locked in context of cluster writeback, so instead, let's call f2fs_balance_fs() in the end of f2fs_write_raw_pages() when all cluster pages were unlocked. Fixes: 4c8ff7095bef ("f2fs: support data compression") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27libfs: unexport generic_ci_d_compare() and generic_ci_d_hash()Eric Biggers1-5/+3
Now that generic_set_encrypted_ci_d_ops() has been added and ext4 and f2fs are using it, it's no longer necessary to export generic_ci_d_compare() and generic_ci_d_hash() to filesystems. Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: fix to set/clear I_LINKABLE under i_lockChao Yu1-0/+8
fsstress + fault injection test case reports a warning message as below: WARNING: CPU: 13 PID: 6226 at fs/inode.c:361 inc_nlink+0x32/0x40 Call Trace: f2fs_init_inode_metadata+0x25c/0x4a0 [f2fs] f2fs_add_inline_entry+0x153/0x3b0 [f2fs] f2fs_add_dentry+0x75/0x80 [f2fs] f2fs_do_add_link+0x108/0x160 [f2fs] f2fs_rename2+0x6ab/0x14f0 [f2fs] vfs_rename+0x70c/0x940 do_renameat2+0x4d8/0x4f0 __x64_sys_renameat2+0x4b/0x60 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Following race case can cause this: Thread A Kworker - f2fs_rename - f2fs_create_whiteout - __f2fs_tmpfile - f2fs_i_links_write - f2fs_mark_inode_dirty_sync - mark_inode_dirty_sync - writeback_single_inode - __writeback_single_inode - spin_lock(&inode->i_lock) - inode->i_state |= I_LINKABLE - inode->i_state &= ~dirty - spin_unlock(&inode->i_lock) - f2fs_add_link - f2fs_do_add_link - f2fs_add_dentry - f2fs_add_inline_entry - f2fs_init_inode_metadata - f2fs_i_links_write - inc_nlink - WARN_ON(!(inode->i_state & I_LINKABLE)) Fix to add i_lock to avoid i_state update race condition. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: fix null page reference in redirty_blocksDaeho Jeong1-2/+4
By Colin's static analysis, we found out there is a null page reference under low memory situation in redirty_blocks. I've made the page finding loop stop immediately and return an error not to cause further memory pressure when we run into a failure to find a page under low memory condition. Signed-off-by: Daeho Jeong <daehojeong@google.com> Reported-by: Colin Ian King <colin.king@canonical.com> Fixes: 5fdb322ff2c2 ("f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE") Reviewed-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: clean up post-read processingEric Biggers3-264/+297
Rework the post-read processing logic to be much easier to understand. At least one bug is fixed by this: if an I/O error occurred when reading from disk, decryption and verity would be performed on the uninitialized data, causing misleading messages in the kernel log. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: trival cleanup in move_data_block()Chao Yu1-5/+3
Trival cleanups: - relocate set_summary() before its use - relocate "allocate block address" to correct place - remove unneeded f2fs_wait_on_page_writeback() Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: fix out-of-repair __setattr_copy()Chao Yu1-1/+2
__setattr_copy() was copied from setattr_copy() in fs/attr.c, there is two missing patches doesn't cover this inner function, fix it. Commit 7fa294c8991c ("userns: Allow chown and setgid preservation") Commit 23adbe12ef7d ("fs,userns: Change inode_capable to capable_wrt_inode_uidgid") Fixes: fbfa2cc58d53 ("f2fs: add file operations") Cc: stable@vger.kernel.org Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: fix to tag FIEMAP_EXTENT_MERGED in f2fs_fiemap()Chao Yu1-0/+1
f2fs does not natively support extents in metadata, 'extent' in f2fs is used as a virtual concept, so in f2fs_fiemap() interface, it needs to tag FIEMAP_EXTENT_MERGED flag to indicated the extent status is a result of merging. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: introduce a new per-sb directory in sysfsChao Yu2-6/+68
Add a new directory 'stat' in path of /sys/fs/f2fs/<devname>/, later we can add new readonly stat sysfs file into this directory, it will make <devname> directory less mess. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: compress: support compress levelChao Yu4-5/+144
Expand 'compress_algorithm' mount option to accept parameter as format of <algorithm>:<level>, by this way, it gives a way to allow user to do more specified config on lz4 and zstd compression level, then f2fs compression can provide higher compress ratio. In order to set compress level for lz4 algorithm, it needs to set CONFIG_LZ4HC_COMPRESS and CONFIG_F2FS_FS_LZ4HC config to enable lz4hc compress algorithm. CR and performance number on lz4/lz4hc algorithm: dd if=enwik9 of=compressed_file conv=fsync Original blocks: 244382 lz4 lz4hc-9 compressed blocks 170647 163270 compress ratio 69.8% 66.8% speed 16.4207 s, 60.9 MB/s 26.7299 s, 37.4 MB/s compress ratio = after / before Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: compress: deny setting unsupported compress algorithmChao Yu1-0/+16
If kernel doesn't support certain kinds of compress algorithm, deny to set them as compress algorithm of f2fs via 'compress_algorithm=%s' mount option. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: relocate f2fs_precache_extents()Chao Yu1-1/+2
Relocate f2fs_precache_extents() in prior to check_swap_activate(), then extent cache can be enabled before its use. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: enforce the immutable flag on open filesChao Yu1-0/+17
This patch ports commit 02b016ca7f99 ("ext4: enforce the immutable flag on open files") to f2fs. According to the chattr man page, "a file with the 'i' attribute cannot be modified..." Historically, this was only enforced when the file was opened, per the rest of the description, "... and the file can not be opened in write mode". There is general agreement that we should standardize all file systems to prevent modifications even for files that were opened at the time the immutable flag is set. Eventually, a change to enforce this at the VFS layer should be landing in mainline. Cc: stable@kernel.org Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: enhance to update i_mode and acl atomically in f2fs_setattr()Chao Yu3-10/+35
Previously, in f2fs_setattr(), we don't update S_ISUID|S_ISGID|S_ISVTX bits with S_IRWXUGO bits and acl entries atomically, so in error path, chmod() may partially success, this patch enhances to make chmod() flow being atomical. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: fix to set inode->i_mode correctly for posix_acl_update_modeWeichao Guo1-0/+1
We should update the ~S_IRWXUGO part of inode->i_mode in __setattr_copy, because posix_acl_update_mode updates mode based on inode->i_mode, which finally overwrites the ~S_IRWXUGO part of i_acl_mode with old i_mode. Testcase to reproduce this bug: 0. adduser abc 1. mkfs.f2fs /dev/sdd 2. mount -t f2fs /dev/sdd /mnt/f2fs 3. mkdir /mnt/f2fs/test 4. setfacl -m u:abc:r /mnt/f2fs/test 5. chmod +s /mnt/f2fs/test Signed-off-by: Weichao Guo <guoweichao@oppo.com> Signed-off-by: Bin Shu <shubin@oppo.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: Replace expression with offsetof()Zheng Yongjun1-1/+1
Use the existing offsetof() macro instead of duplicating code. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: handle unallocated section and zone on pinned/atgcJaegeuk Kim1-2/+2
If we have large section/zone, unallocated segment makes them corrupted. E.g., - Pinned file: -1 119304647 119304647 - ATGC data: -1 119304647 119304647 Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27nilfs2: remove cruft in nilfs_alloc_seg_bioChristoph Hellwig1-4/+0
bio_alloc never returns NULL when it can sleep. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27nfs/blocklayout: remove cruft in bl_alloc_init_bioChristoph Hellwig1-5/+0
bio_alloc never returns NULL when it can sleep. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27f2fs: remove FAULT_ALLOC_BIOChristoph Hellwig3-27/+4
Sleeping bio allocations do not fail, which means that injecting an error into sleeping bio allocations is a little silly. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27f2fs: use blkdev_issue_flush in __submit_flush_waitChristoph Hellwig3-13/+3
Use the blkdev_issue_flush helper instead of duplicating it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27block: use an on-stack bio in blkdev_issue_flushChristoph Hellwig18-20/+20
There is no point in allocating memory for a synchronous flush. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27btrfs: use bio_kmalloc in __alloc_deviceChristoph Hellwig1-1/+1
Use bio_kmalloc instead of open coding it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27zonefs: use bio_alloc in zonefs_file_dio_appendChristoph Hellwig1-1/+1
Use bio_alloc instead of open coding it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27io_uring: fix flush cqring overflow list while TASK_INTERRUPTIBLEHao Xu1-2/+6
Abaci reported the follow warning: [ 27.073425] do not call blocking ops when !TASK_RUNNING; state=1 set at [] prepare_to_wait_exclusive+0x3a/0xc0 [ 27.075805] WARNING: CPU: 0 PID: 951 at kernel/sched/core.c:7853 __might_sleep+0x80/0xa0 [ 27.077604] Modules linked in: [ 27.078379] CPU: 0 PID: 951 Comm: a.out Not tainted 5.11.0-rc3+ #1 [ 27.079637] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 27.080852] RIP: 0010:__might_sleep+0x80/0xa0 [ 27.081835] Code: 65 48 8b 04 25 80 71 01 00 48 8b 90 c0 15 00 00 48 8b 70 18 48 c7 c7 08 39 95 82 c6 05 f9 5f de 08 01 48 89 d1 e8 00 c6 fa ff 0b eb bf 41 0f b6 f5 48 c7 c7 40 23 c9 82 e8 f3 48 ec 00 eb a7 [ 27.084521] RSP: 0018:ffffc90000fe3ce8 EFLAGS: 00010286 [ 27.085350] RAX: 0000000000000000 RBX: ffffffff82956083 RCX: 0000000000000000 [ 27.086348] RDX: ffff8881057a0000 RSI: ffffffff8118cc9e RDI: ffff88813bc28570 [ 27.087598] RBP: 00000000000003a7 R08: 0000000000000001 R09: 0000000000000001 [ 27.088819] R10: ffffc90000fe3e00 R11: 00000000fffef9f0 R12: 0000000000000000 [ 27.089819] R13: 0000000000000000 R14: ffff88810576eb80 R15: ffff88810576e800 [ 27.091058] FS: 00007f7b144cf740(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 [ 27.092775] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.093796] CR2: 00000000022da7b8 CR3: 000000010b928002 CR4: 00000000003706f0 [ 27.094778] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.095780] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.097011] Call Trace: [ 27.097685] __mutex_lock+0x5d/0xa30 [ 27.098565] ? prepare_to_wait_exclusive+0x71/0xc0 [ 27.099412] ? io_cqring_overflow_flush.part.101+0x6d/0x70 [ 27.100441] ? lockdep_hardirqs_on_prepare+0xe9/0x1c0 [ 27.101537] ? _raw_spin_unlock_irqrestore+0x2d/0x40 [ 27.102656] ? trace_hardirqs_on+0x46/0x110 [ 27.103459] ? io_cqring_overflow_flush.part.101+0x6d/0x70 [ 27.104317] io_cqring_overflow_flush.part.101+0x6d/0x70 [ 27.105113] io_cqring_wait+0x36e/0x4d0 [ 27.105770] ? find_held_lock+0x28/0xb0 [ 27.106370] ? io_uring_remove_task_files+0xa0/0xa0 [ 27.107076] __x64_sys_io_uring_enter+0x4fb/0x640 [ 27.107801] ? rcu_read_lock_sched_held+0x59/0xa0 [ 27.108562] ? lockdep_hardirqs_on_prepare+0xe9/0x1c0 [ 27.109684] ? syscall_enter_from_user_mode+0x26/0x70 [ 27.110731] do_syscall_64+0x2d/0x40 [ 27.111296] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 27.112056] RIP: 0033:0x7f7b13dc8239 [ 27.112663] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 ec 2c 00 f7 d8 64 89 01 48 [ 27.115113] RSP: 002b:00007ffd6d7f5c88 EFLAGS: 00000286 ORIG_RAX: 00000000000001aa [ 27.116562] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7b13dc8239 [ 27.117961] RDX: 000000000000478e RSI: 0000000000000000 RDI: 0000000000000003 [ 27.118925] RBP: 00007ffd6d7f5cb0 R08: 0000000020000040 R09: 0000000000000008 [ 27.119773] R10: 0000000000000001 R11: 0000000000000286 R12: 0000000000400480 [ 27.120614] R13: 00007ffd6d7f5d90 R14: 0000000000000000 R15: 0000000000000000 [ 27.121490] irq event stamp: 5635 [ 27.121946] hardirqs last enabled at (5643): [] console_unlock+0x5c4/0x740 [ 27.123476] hardirqs last disabled at (5652): [] console_unlock+0x4e7/0x740 [ 27.125192] softirqs last enabled at (5272): [] __do_softirq+0x3c5/0x5aa [ 27.126430] softirqs last disabled at (5267): [] asm_call_irq_on_stack+0xf/0x20 [ 27.127634] ---[ end trace 289d7e28fa60f928 ]--- This is caused by calling io_cqring_overflow_flush() which may sleep after calling prepare_to_wait_exclusive() which set task state to TASK_INTERRUPTIBLE Reported-by: Abaci <abaci@linux.alibaba.com> Fixes: 6c503150ae33 ("io_uring: patch up IOPOLL overflow_flush sync") Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Hao Xu <haoxu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27Revert "block: simplify set_init_blocksize" to regain lost performanceMaxim Mikityanskiy1-1/+9
The cited commit introduced a serious regression with SATA write speed, as found by bisecting. This patch reverts this commit, which restores write speed back to the values observed before this commit. The performance tests were done on a Helios4 NAS (2nd batch) with 4 HDDs (WD8003FFBX) using dd (bs=1M count=2000). "Direct" is a test with a single HDD, the rest are different RAID levels built over the first partitions of 4 HDDs. Test results are in MB/s, R is read, W is write. | Direct | RAID0 | RAID10 f2 | RAID10 n2 | RAID6 ----------------+--------+-------+-----------+-----------+-------- 9011495c9466 | R:256 | R:313 | R:276 | R:313 | R:323 (before faulty) | W:254 | W:253 | W:195 | W:204 | W:117 ----------------+--------+-------+-----------+-----------+-------- 5ff9f19231a0 | R:257 | R:398 | R:312 | R:344 | R:391 (faulty commit) | W:154 | W:122 | W:67.7 | W:66.6 | W:67.2 ----------------+--------+-------+-----------+-----------+-------- 5.10.10 | R:256 | R:401 | R:312 | R:356 | R:375 unpatched | W:149 | W:123 | W:64 | W:64.1 | W:61.5 ----------------+--------+-------+-----------+-----------+-------- 5.10.10 | R:255 | R:396 | R:312 | R:340 | R:393 patched | W:247 | W:274 | W:220 | W:225 | W:121 Applying this patch doesn't hurt read performance, while improves the write speed by 1.5x - 3.5x (more impact on RAID tests). The write speed is restored back to the state before the faulty commit, and even a bit higher in RAID tests (which aren't HDD-bound on this device) - that is likely related to other optimizations done between the faulty commit and 5.10.10 which also improved the read speed. Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Fixes: 5ff9f19231a0 ("block: simplify set_init_blocksize") Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26io_uring: fix wqe->lock/completion_lock deadlockPavel Begunkov1-8/+2
Joseph reports following deadlock: CPU0: ... io_kill_linked_timeout // &ctx->completion_lock io_commit_cqring __io_queue_deferred __io_queue_async_work io_wq_enqueue io_wqe_enqueue // &wqe->lock CPU1: ... __io_uring_files_cancel io_wq_cancel_cb io_wqe_cancel_pending_work // &wqe->lock io_cancel_task_cb // &ctx->completion_lock Only __io_queue_deferred() calls queue_async_work() while holding ctx->completion_lock, enqueue drained requests via io_req_task_queue() instead. Cc: stable@vger.kernel.org # 5.9+ Reported-by: Joseph Qi <joseph.qi@linux.alibaba.com> Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26block: unexport truncate_bdev_rangeChristoph Hellwig1-1/+0
truncate_bdev_range is only used in always built-in block layer code, so remove the export and the !CONFIG_BLOCK stub. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26bdev: Do not return EBUSY if bdev discard races with writeJan Kara1-6/+4
blkdev_fallocate() tries to detect whether a discard raced with an overlapping write by calling invalidate_inode_pages2_range(). However this check can give both false negatives (when writing using direct IO or when writeback already writes out the written pagecache range) and false positives (when write is not actually overlapping but ends in the same page when blocksize < pagesize). This actually causes issues for qemu which is getting confused by EBUSY errors. Fix the problem by removing this conflicting write detection since it is inherently racy and thus of little use anyway. Reported-by: Maxim Levitsky <mlevitsk@redhat.com> CC: "Darrick J. Wong" <darrick.wong@oracle.com> Link: https://lore.kernel.org/qemu-devel/20201111153913.41840-1-mlevitsk@redhat.com Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26io_uring: fix cancellation taking mutex while TASK_UNINTERRUPTIBLEPavel Begunkov1-17/+22
do not call blocking ops when !TASK_RUNNING; state=2 set at [<00000000ced9dbfc>] prepare_to_wait+0x1f4/0x3b0 kernel/sched/wait.c:262 WARNING: CPU: 1 PID: 19888 at kernel/sched/core.c:7853 __might_sleep+0xed/0x100 kernel/sched/core.c:7848 RIP: 0010:__might_sleep+0xed/0x100 kernel/sched/core.c:7848 Call Trace: __mutex_lock_common+0xc4/0x2ef0 kernel/locking/mutex.c:935 __mutex_lock kernel/locking/mutex.c:1103 [inline] mutex_lock_nested+0x1a/0x20 kernel/locking/mutex.c:1118 io_wq_submit_work+0x39a/0x720 fs/io_uring.c:6411 io_run_cancel fs/io-wq.c:856 [inline] io_wqe_cancel_pending_work fs/io-wq.c:990 [inline] io_wq_cancel_cb+0x614/0xcb0 fs/io-wq.c:1027 io_uring_cancel_files fs/io_uring.c:8874 [inline] io_uring_cancel_task_requests fs/io_uring.c:8952 [inline] __io_uring_files_cancel+0x115d/0x19e0 fs/io_uring.c:9038 io_uring_files_cancel include/linux/io_uring.h:51 [inline] do_exit+0x2e6/0x2490 kernel/exit.c:780 do_group_exit+0x168/0x2d0 kernel/exit.c:922 get_signal+0x16b5/0x2030 kernel/signal.c:2770 arch_do_signal_or_restart+0x8e/0x6a0 arch/x86/kernel/signal.c:811 handle_signal_work kernel/entry/common.c:147 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0xac/0x1e0 kernel/entry/common.c:201 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline] syscall_exit_to_user_mode+0x48/0x190 kernel/entry/common.c:302 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Rewrite io_uring_cancel_files() to mimic __io_uring_task_cancel()'s counting scheme, so it does all the heavy work before setting TASK_UNINTERRUPTIBLE. Cc: stable@vger.kernel.org # 5.9+ Reported-by: syzbot+f655445043a26a7cfab8@syzkaller.appspotmail.com Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> [axboe: fix inverted task check] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26io_uring: fix __io_uring_files_cancel() with TASK_UNINTERRUPTIBLEPavel Begunkov1-6/+5
If the tctx inflight number haven't changed because of cancellation, __io_uring_task_cancel() will continue leaving the task in TASK_UNINTERRUPTIBLE state, that's not expected by __io_uring_files_cancel(). Ensure we always call finish_wait() before retrying. Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25teach sendfile(2) to handle send-to-pipe directlyAl Viro3-7/+23
no point going through the intermediate pipe Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-25take the guts of file-to-pipe splice into a helper functionAl Viro1-7/+18
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-25do_splice_to(): move the logics for limiting the read length inAl Viro1-14/+7
Both callers have the identical logics limiting the amount of data we try to read into pipe - no more than would fit into that pipe. Move that into do_splice_to() itself. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-26ecryptfs: fix uid translation for setxattr on security.capabilityMiklos Szeredi1-3/+7
Prior to commit 7c03e2cda4a5 ("vfs: move cap_convert_nscap() call into vfs_setxattr()") the translation of nscap->rootid did not take stacked filesystems (overlayfs and ecryptfs) into account. That patch fixed the overlay case, but made the ecryptfs case worse. Restore old the behavior for ecryptfs that existed before the overlayfs fix. This does not fix ecryptfs's handling of complex user namespace setups, but it does make sure existing setups don't regress. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Tyler Hicks <code@tyhicks.com> Fixes: 7c03e2cda4a5 ("vfs: move cap_convert_nscap() call into vfs_setxattr()") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Tyler Hicks <code@tyhicks.com>
2021-01-25fs/pipe: allow sendfile() to pipe againJohannes Berg1-0/+1
After commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") sendfile() could no longer send data from a real file to a pipe, breaking for example certain cgit setups (e.g. when running behind fcgiwrap), because in this case cgit will try to do exactly this: sendfile() to a pipe. Fix this by using iter_file_splice_write for the splice_write method of pipes, as suggested by Christoph. Cc: stable@vger.kernel.org Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-25btrfs: fix log replay failure due to race with space cache rebuildFilipe Manana1-43/+18
After a sudden power failure we may end up with a space cache on disk that is not valid and needs to be rebuilt from scratch. If that happens, during log replay when we attempt to pin an extent buffer from a log tree, at btrfs_pin_extent_for_log_replay(), we do not wait for the space cache to be rebuilt through the call to: btrfs_cache_block_group(cache, 1); That is because that only waits for the task (work queue job) that loads the space cache to change the cache state from BTRFS_CACHE_FAST to any other value. That is ok when the space cache on disk exists and is valid, but when the cache is not valid and needs to be rebuilt, it ends up returning as soon as the cache state changes to BTRFS_CACHE_STARTED (done at caching_thread()). So this means that we can end up trying to unpin a range which is not yet marked as free in the block group. This results in the call to btrfs_remove_free_space() to return -EINVAL to btrfs_pin_extent_for_log_replay(), which in turn makes the log replay fail as well as mounting the filesystem. More specifically the -EINVAL comes from free_space_cache.c:remove_from_bitmap(), because the requested range is not marked as free space (ones in the bitmap), we have the following condition triggered: static noinline int remove_from_bitmap(struct btrfs_free_space_ctl *ctl, (...) if (ret < 0 || search_start != *offset) return -EINVAL; (...) It's the "search_start != *offset" that results in the condition being evaluated to true. When this happens we got the following in dmesg/syslog: [72383.415114] BTRFS: device fsid 32b95b69-0ea9-496a-9f02-3f5a56dc9322 devid 1 transid 1432 /dev/sdb scanned by mount (3816007) [72383.417837] BTRFS info (device sdb): disk space caching is enabled [72383.418536] BTRFS info (device sdb): has skinny extents [72383.423846] BTRFS info (device sdb): start tree-log replay [72383.426416] BTRFS warning (device sdb): block group 30408704 has wrong amount of free space [72383.427686] BTRFS warning (device sdb): failed to load free space cache for block group 30408704, rebuilding it now [72383.454291] BTRFS: error (device sdb) in btrfs_recover_log_trees:6203: errno=-22 unknown (Failed to pin buffers while recovering log root tree.) [72383.456725] BTRFS: error (device sdb) in btrfs_replay_log:2253: errno=-22 unknown (Failed to recover log tree) [72383.460241] BTRFS error (device sdb): open_ctree failed We also mark the range for the extent buffer in the excluded extents io tree. That is fine when the space cache is valid on disk and we can load it, in which case it causes no problems. However, for the case where we need to rebuild the space cache, because it is either invalid or it is missing, having the extent buffer range marked in the excluded extents io tree leads to a -EINVAL failure from the call to btrfs_remove_free_space(), resulting in the log replay and mount to fail. This is because by having the range marked in the excluded extents io tree, the caching thread ends up never adding the range of the extent buffer as free space in the block group since the calls to add_new_free_space(), called from load_extent_tree_free(), filter out any ranges that are marked as excluded extents. So fix this by making sure that during log replay we wait for the caching task to finish completely when we need to rebuild a space cache, and also drop the need to mark the extent buffer range in the excluded extents io tree, as well as clearing ranges from that tree at btrfs_finish_extent_commit(). This started to happen with some frequency on large filesystems having block groups with a lot of fragmentation since the recent commit e747853cae3ae3 ("btrfs: load free space cache asynchronously"), but in fact the issue has been there for years, it was just much less likely to happen. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-25btrfs: fix lockdep warning due to seqcount_mutex on 32bit archSu Yue2-6/+7
This effectively reverts commit d5c8238849e7 ("btrfs: convert data_seqcount to seqcount_mutex_t"). While running fstests on 32 bits test box, many tests failed because of warnings in dmesg. One of those warnings (btrfs/003): [66.441317] WARNING: CPU: 6 PID: 9251 at include/linux/seqlock.h:279 btrfs_remove_chunk+0x58b/0x7b0 [btrfs] [66.441446] CPU: 6 PID: 9251 Comm: btrfs Tainted: G O 5.11.0-rc4-custom+ #5 [66.441449] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014 [66.441451] EIP: btrfs_remove_chunk+0x58b/0x7b0 [btrfs] [66.441472] EAX: 00000000 EBX: 00000001 ECX: c576070c EDX: c6b15803 [66.441475] ESI: 10000000 EDI: 00000000 EBP: c56fbcfc ESP: c56fbc70 [66.441477] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010246 [66.441481] CR0: 80050033 CR2: 05c8da20 CR3: 04b20000 CR4: 00350ed0 [66.441485] Call Trace: [66.441510] btrfs_relocate_chunk+0xb1/0x100 [btrfs] [66.441529] ? btrfs_lookup_block_group+0x17/0x20 [btrfs] [66.441562] btrfs_balance+0x8ed/0x13b0 [btrfs] [66.441586] ? btrfs_ioctl_balance+0x333/0x3c0 [btrfs] [66.441619] ? __this_cpu_preempt_check+0xf/0x11 [66.441643] btrfs_ioctl_balance+0x333/0x3c0 [btrfs] [66.441664] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [66.441683] btrfs_ioctl+0x414/0x2ae0 [btrfs] [66.441700] ? __lock_acquire+0x35f/0x2650 [66.441717] ? lockdep_hardirqs_on+0x87/0x120 [66.441720] ? lockdep_hardirqs_on_prepare+0xd0/0x1e0 [66.441724] ? call_rcu+0x2d3/0x530 [66.441731] ? __might_fault+0x41/0x90 [66.441736] ? kvm_sched_clock_read+0x15/0x50 [66.441740] ? sched_clock+0x8/0x10 [66.441745] ? sched_clock_cpu+0x13/0x180 [66.441750] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [66.441750] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [66.441768] __ia32_sys_ioctl+0x165/0x8a0 [66.441773] ? __this_cpu_preempt_check+0xf/0x11 [66.441785] ? __might_fault+0x89/0x90 [66.441791] __do_fast_syscall_32+0x54/0x80 [66.441796] do_fast_syscall_32+0x32/0x70 [66.441801] do_SYSENTER_32+0x15/0x20 [66.441805] entry_SYSENTER_32+0x9f/0xf2 [66.441808] EIP: 0xab7b5549 [66.441814] EAX: ffffffda EBX: 00000003 ECX: c4009420 EDX: bfa91f5c [66.441816] ESI: 00000003 EDI: 00000001 EBP: 00000000 ESP: bfa91e98 [66.441818] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000292 [66.441833] irq event stamp: 42579 [66.441835] hardirqs last enabled at (42585): [<c60eb065>] console_unlock+0x495/0x590 [66.441838] hardirqs last disabled at (42590): [<c60eafd5>] console_unlock+0x405/0x590 [66.441840] softirqs last enabled at (41698): [<c601b76c>] call_on_stack+0x1c/0x60 [66.441843] softirqs last disabled at (41681): [<c601b76c>] call_on_stack+0x1c/0x60 ======================================================================== btrfs_remove_chunk+0x58b/0x7b0: __seqprop_mutex_assert at linux/./include/linux/seqlock.h:279 (inlined by) btrfs_device_set_bytes_used at linux/fs/btrfs/volumes.h:212 (inlined by) btrfs_remove_chunk at linux/fs/btrfs/volumes.c:2994 ======================================================================== The warning is produced by lockdep_assert_held() in __seqprop_mutex_assert() if CONFIG_LOCKDEP is enabled. And "olumes.c:2994 is btrfs_device_set_bytes_used() with mutex lock fs_info->chunk_mutex held already. After adding some debug prints, the cause was found that many __alloc_device() are called with NULL @fs_info (during scanning ioctl). Inside the function, btrfs_device_data_ordered_init() is expanded to seqcount_mutex_init(). In this scenario, its second parameter info->chunk_mutex is &NULL->chunk_mutex which equals to offsetof(struct btrfs_fs_info, chunk_mutex) unexpectedly. Thus, seqcount_mutex_init() is called in wrong way. And later btrfs_device_get/set helpers trigger lockdep warnings. The device and filesystem object lifetimes are different and we'd have to synchronize initialization of the btrfs_device::data_seqcount with the fs_info, possibly using some additional synchronization. It would still not prevent concurrent access to the seqcount lock when it's used for read and initialization. Commit d5c8238849e7 ("btrfs: convert data_seqcount to seqcount_mutex_t") does not mention a particular problem being fixed so revert should not cause any harm and we'll get the lockdep warning fixed. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210139 Reported-by: Erhard F <erhard_f@mailbox.org> Fixes: d5c8238849e7 ("btrfs: convert data_seqcount to seqcount_mutex_t") CC: stable@vger.kernel.org # 5.10 CC: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Su Yue <l@damenly.su> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-25btrfs: fix possible free space tree corruption with online conversionJosef Bacik3-2/+21
While running btrfs/011 in a loop I would often ASSERT() while trying to add a new free space entry that already existed, or get an EEXIST while adding a new block to the extent tree, which is another indication of double allocation. This occurs because when we do the free space tree population, we create the new root and then populate the tree and commit the transaction. The problem is when you create a new root, the root node and commit root node are the same. During this initial transaction commit we will run all of the delayed refs that were paused during the free space tree generation, and thus begin to cache block groups. While caching block groups the caching thread will be reading from the main root for the free space tree, so as we make allocations we'll be changing the free space tree, which can cause us to add the same range twice which results in either the ASSERT(ret != -EEXIST); in __btrfs_add_free_space, or in a variety of different errors when running delayed refs because of a double allocation. Fix this by marking the fs_info as unsafe to load the free space tree, and fall back on the old slow method. We could be smarter than this, for example caching the block group while we're populating the free space tree, but since this is a serious problem I've opted for the simplest solution. CC: stable@vger.kernel.org # 4.9+ Fixes: a5ed91828518 ("Btrfs: implement the free space B-tree") Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-25udf: fix silent AED tagLocation corruptionSteven J. Magnani1-3/+6
When extending a file, udf_do_extend_file() may enter following empty indirect extent. At the end of udf_do_extend_file() we revert prev_epos to point to the last written extent. However if we end up not adding any further extent in udf_do_extend_file(), the reverting points prev_epos into the header area of the AED and following updates of the extents (in udf_update_extents()) will corrupt the header. Make sure that we do not follow indirect extent if we are not going to add any more extents so that returning back to the last written extent works correctly. Link: https://lore.kernel.org/r/20210107234116.6190-2-magnani@ieee.org Signed-off-by: Steven J. Magnani <magnani@ieee.org> Signed-off-by: Jan Kara <jack@suse.cz>
2021-01-25isofs: release buffer head before returnPan Bian2-0/+2
Release the buffer_head before returning error code in do_isofs_readdir() and isofs_find_entry(). Fixes: 2deb1acc653c ("isofs: fix access to unallocated memory when reading corrupted filesystem") Link: https://lore.kernel.org/r/20210118120455.118955-1-bianpan2016@163.com Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Jan Kara <jack@suse.cz>
2021-01-25bio: add a helper calculating nr segments to allocPavel Begunkov2-8/+8
Add a helper function calculating the number of bvec segments we need to allocate to construct a bio. It doesn't change anything functionally, but will be used to not duplicate special cases in the future. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25block/psi: remove PSI annotations from direct IOPavel Begunkov1-0/+2
Direct IO does not operate on the current working set of pages managed by the kernel, so it should not be accounted as memory stall to PSI infrastructure. The block layer and iomap direct IO use bio_iov_iter_get_pages() to build bios, and they are the only users of it, so to avoid PSI tracking for them clear out BIO_WORKINGSET flag. Do same for dio_bio_submit() because fs/direct_io constructs bios by hand directly calling bio_add_page(). Reported-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25splice: don't generate zero-len segement bvecsPavel Begunkov1-3/+6
iter_file_splice_write() may spawn bvec segments with zero-length. In preparation for prohibiting them, filter out by hand at splice level. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25nfsd: find_cpntf_state cleanupJ. Bruce Fields1-8/+14
I think this unusual use of struct compound_state could cause confusion. It's not that much more complicated just to open-code this stateid lookup. The only change in behavior should be a different error return in the case the copy is using a source stateid that is a revoked delegation, but I doubt that matters. Signed-off-by: J. Bruce Fields <bfields@redhat.com> [ cel: squashed in fix reported by Coverity ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-01-25nfsd: refactor set_clientJ. Bruce Fields1-16/+16
This'll be useful elsewhere. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-01-25nfsd: rename lookup_clientid->set_clientJ. Bruce Fields1-10/+8
I think this is a better name, and I'm going to reuse elsewhere the code that does the lookup itself. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-01-25nfsd: simplify nfsd_renewJ. Bruce Fields1-6/+3
You can take the single-exit thing too far, I think. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>