| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
there we'll be able to merge it with its counterparts in other
cases, and there's no reason to do it before the parent has
been unlocked
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
->atomic_open() might have used a different alias than the one we'd
passed to it; in "not opened" case we take care of that, in "opened"
one we don't. Currently we don't care downstream of "opened" case
which alias to return; however, that will change shortly when we
get to unifying may_open() calls.
It's not hard to get right in all cases, anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
common guts of follow_down() and follow_managed() taken to a new
helper - traverse_mounts(). The remnants of follow_managed()
are folded into its sole remaining caller (handle_mounts()).
Calling conventions of handle_mounts() slightly sanitized -
instead of the weird "1 for success, -E... for failure" that used
to be imposed by the calling conventions of walk_component() et.al.
we can use the normal "0 for success, -E... for failure".
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
make the loop more similar to that in follow_managed(), with
explicit tracking of flags, etc.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
set on entry, clear when we get to the last component.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We use nd->stack to store two things: pinning down the symlinks
we are resolving and resuming the name traversal when a nested
symlink is finished.
Currently, nd->depth is used to keep track of both. It's 0 when
we call link_path_walk() for the first time (for the pathname
itself) and 1 on all subsequent calls (for trailing symlinks,
if any). That's fine, as far as pinning symlinks goes - when
handling a trailing symlink, the string we are interpreting
is the body of symlink pinned down in nd->stack[0]. It's
rather inconvenient with respect to handling nested symlinks,
though - when we run out of a string we are currently interpreting,
we need to decide whether it's a nested symlink (in which case
we need to pick the string saved back when we started to interpret
that nested symlink and resume its traversal) or not (in which
case we are done with link_path_walk()).
Current solution is a bit of a kludge - in handling of trailing symlink
(in lookup_last() and open_last_lookups() we clear nd->stack[0].name.
That allows link_path_walk() to use the following rules when
running out of a string to interpret:
* if nd->depth is zero, we are at the end of pathname itself.
* if nd->depth is positive, check the saved string; for
nested symlink it will be non-NULL, for trailing symlink - NULL.
It works, but it's rather non-obvious. Note that we have two sets:
the set of symlinks currently being traversed and the set of postponed
pathname tails. The former is stored in nd->stack[0..nd->depth-1].link
and it's valid throught the pathname resolution; the latter is valid only
during an individual call of link_path_walk() and it occupies
nd->stack[0..nd->depth-1].name for the first call of link_path_walk() and
nd->stack[1..nd->depth-1].name for subsequent ones. The kludge is basically
a way to recognize the second set becoming empty.
The things get simpler if we keep track of the second set's size
explicitly and always store it in nd->stack[0..depth-1].name.
We access the second set only inside link_path_walk(), so its
size can live in a local variable; that way the check becomes
trivial without the need of that kludge.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
old flags & WALK_FOLLOW <=> new !(flags & WALK_TRAILING)
That's what that flag had really been used for.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
->last_type values are set in 3 places: path_init() (sets to LAST_ROOT),
link_path_walk (LAST_NORM/DOT/DOTDOT) and pick_link (LAST_BIND).
The are checked in walk_component(), lookup_last() and do_last().
They also get copied to the caller by filename_parentat(). In the last
3 cases the value is what we had at the return from link_path_walk().
In case of walk_component() it's either directly downstream from
assignment in link_path_walk() or, when called by lookup_last(), the
value we have at the return from link_path_walk().
The value at the entry into link_path_walk() can survive to return only
if the pathname contains nothing but slashes. Note that pick_link()
never returns such - pure jumps are handled directly. So for the calls
of link_path_walk() for trailing symlinks it does not matter what value
had been there at the entry; the value at the return won't depend upon it.
There are 3 call chains that might have pick_link() storing LAST_BIND:
1) pick_link() from step_into() from walk_component() from
link_path_walk(). In that case we will either be parsing the next
component immediately after return into link_path_walk(), which will
overwrite the ->last_type before anyone has a chance to look at it,
or we'll fail, in which case nobody will be looking at ->last_type at all.
2) pick_link() from step_into() from walk_component() from lookup_last().
The value is never looked at due to the above; it won't affect the value
seen at return from any link_path_walk().
3) pick_link() from step_into() from do_last(). Ditto.
In other words, assignemnt in pick_link() is pointless, and so is
LAST_BIND itself; nothing ever looks at that value. Kill it off.
And make link_path_walk() _always_ assign ->last_type - in the only
case when the value at the entry might survive to the return that value
is always LAST_ROOT, inherited from path_init(). Move that assignment
from path_init() into the beginning of link_path_walk(), to consolidate
the things.
Historical note: LAST_BIND used to be used for the kludge with trailing
pure jump symlinks (extra iteration through the top-level loop).
No point keeping it anymore...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
kill nd->link_inode, while we are at it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
move the only remaining call of get_link() into pick_link()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
move get_link() call into step_into().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Move the call of get_link() into walk_component(). Change the
calling conventions for walk_component() to returning the link
body to follow (if any).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
After a pure jump ("/" or procfs-style symlink) we don't need to
hold the link anymore. link_path_walk() dropped it if such case
had been detected, lookup_last/do_last() (i.e. old trailing_symlink())
left it on the stack - it ended up calling terminate_walk() shortly
anyway, which would've purged the entire stack.
Do it in get_link() itself instead. Simpler logics that way...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Fold trailing_symlink() into lookup_last() and do_last(), change
the calling conventions of those two. Rules change:
success, we are done => NULL instead of 0
error => ERR_PTR(-E...) instead of -E...
got a symlink to follow => return the path to be followed instead of 1
The loops calling those (in path_lookupat() and path_openat()) adjusted.
A subtle change of control flow here: originally a pure-jump trailing
symlink ("/" or procfs one) would've passed through the upper level
loop once more, with "" for path to traverse. That would've brought
us back to the lookup_last/do_last entry and we would've hit LAST_BIND
case (LAST_BIND left from get_link() called by trailing_symlink())
and pretty much skip to the point right after where we'd left the
sucker back when we picked that trailing symlink.
Now we don't bother with that extra pass through the upper level
loop - if get_link() says "I've just done a pure jump, nothing
else to do", we just treat that as non-symlink case.
Boilerplate added on that step will go away shortly - it'll migrate
into walk_component() and then to step_into(), collapsing into the
change of calling conventions for those.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Move restoring LOOKUP_PARENT and zeroing nd->stack.name[0] past
the call of get_link() (nothing _currently_ uses them in there).
That allows to moved the call of may_follow_link() into get_link()
as well, since now the presence of LOOKUP_PARENT distinguishes
the callers from each other (link_path_walk() has it, trailing_symlink()
doesn't).
Preparations for folding trailing_symlink() into callers (lookup_last()
and do_last()) and changing the calling conventions of those. Next
stage after that will have get_link() call migrate into walk_component(),
then - into step_into(). It's tricky enough to warrant doing that
in stages, unfortunately...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
New LOOKUP flag, telling path_lookupat() to act as path_mountpointat().
IOW, traverse mounts at the final point and skip revalidation of the
location where it ends up.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The following is true:
* calls of handle_mounts() and step_into() are always
paired in sequences like
err = handle_mounts(nd, dentry, &path, &inode, &seq);
if (unlikely(err < 0))
return err;
err = step_into(nd, &path, flags, inode, seq);
* in all such sequences path is uninitialized before and
unused after this pair of calls
* in all such sequences inode and seq are unused afterwards.
So the call of handle_mounts() can be shifted inside step_into(),
turning 'path' into a local variable in the combined function.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Tells step_into() not to follow symlinks, regardless of LOOKUP_FOLLOW.
Allows to switch handle_lookup_down() to of step_into(), getting
all follow_managed() and step_into() calls paired.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We need to dismiss a symlink when we are done traversing it;
currently that's done when we call step_into() for its last
component. For the cases when we do not call step_into()
for that component (i.e. when it's . or ..) we do the same
symlink dismissal after the call of handle_dots().
What we need to guarantee is that the symlink won't be dismissed
while we are still using nd->last.name - it's pointing into the
body of said symlink. step_into() is sufficiently late - by
the time it's called we'd already obtained the dentry, so the
name we'd been looking up is no longer needed. However, it
turns out to be cleaner to have that ("we are done with that
component now, can dismiss the link") done explicitly - in the
callers of step_into().
In handle_dots() case we won't be using the component string
at all, so for . and .. the corresponding point is actually
_before_ the call of handle_dots(), not after it.
Fix a minor irregularity in do_last(), while we are at it -
if trailing symlink ended with . or .. we forgot to dismiss
it. Not a problem, since nameidata is about to be done with
(neither . nor .. can be a trailing symlink, so this is the
last iteration through the loop) and terminate_walk() will
clean the stack anyway, but let's keep it more regular.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Current calling conventions: -E... on error, 0 on cache miss,
result of handle_mounts(nd, dentry, path, inode, seqp) on
success. Turn that into returning ERR_PTR(-E...), NULL and dentry
resp.; deal with handle_mounts() in the callers. The thing
is, they already do that in cache miss handling case, so we
just need to supply dentry to them and unify the mount traversal
in those cases. Fewer arguments that way, and we get closer
to merging handle_mounts() and step_into().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and make the callers of __follow_mount_rcu() use handle_mounts().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
1) in case of __follow_mount_rcu() failure, lookup_fast() proceeds
to call unlazy_child() and, should it succeed, handle_mounts().
Note that we have status > 0 (or we wouldn't be calling
__follow_mount_rcu() at all), so all stuff conditional upon
non-positive status won't be even touched.
Consolidate just that sequence after the call of __follow_mount_rcu().
2) calling d_is_negative() and keeping its result is pointless -
we either don't get past checking ->d_seq (and don't use the results of
d_is_negative() at all), or we are guaranteed that ->d_inode and
type bits of ->d_flags had been consistent at the time of d_is_negative()
call. IOW, we could only get to the use of its result if it's
equal to !inode. The same ->d_seq check guarantees that after that point
this CPU won't observe ->d_flags values older than ->d_inode update.
So 'negative' variable is completely pointless these days.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Fix the handling of signals in client rxrpc calls made by the afs
filesystem. Ignore signals completely, leaving call abandonment or
connection loss to be detected by timeouts inside AF_RXRPC.
Allowing a filesystem call to be interrupted after the entire request has
been transmitted and an abort sent means that the server may or may not
have done the action - and we don't know. It may even be worse than that
for older servers.
Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
When an AFS service handler function aborts a call, AF_RXRPC marks the call
as complete - which means that it's not going to get any more packets from
the receiver. This is a problem because reception of the final ACK is what
triggers afs_deliver_to_call() to drop the final ref on the afs_call
object.
Instead, aborted AFS service calls may then just sit around waiting for
ever or until they're displaced by a new call on the same connection
channel or a connection-level abort.
Fix this by calling afs_set_call_complete() to finalise the afs_call struct
representing the call.
However, we then need to drop the ref that stops the call from being
deallocated. We can do this in afs_set_call_complete(), as the work queue
is holding a separate ref of its own, but then we shouldn't do it in
afs_process_async_call() and afs_delete_async_call().
call->drop_ref is set to indicate that a ref needs dropping for a call and
this is dealt with when we transition a call to AFS_CALL_COMPLETE.
But then we also need to get rid of the ref that pins an asynchronous
client call. We can do this by the same mechanism, setting call->drop_ref
for an async client call too.
We can also get rid of call->incoming since nothing ever sets it and only
one thing ever checks it (futilely).
A trace of the rxrpc_call and afs_call struct ref counting looks like:
<idle>-0 [001] ..s5 164.764892: rxrpc_call: c=00000002 SEE u=3 sp=rxrpc_new_incoming_call+0x473/0xb34 a=00000000442095b5
<idle>-0 [001] .Ns5 164.766001: rxrpc_call: c=00000002 QUE u=4 sp=rxrpc_propose_ACK+0xbe/0x551 a=00000000442095b5
<idle>-0 [001] .Ns4 164.766005: rxrpc_call: c=00000002 PUT u=3 sp=rxrpc_new_incoming_call+0xa3f/0xb34 a=00000000442095b5
<idle>-0 [001] .Ns7 164.766433: afs_call: c=00000002 WAKE u=2 o=11 sp=rxrpc_notify_socket+0x196/0x33c
kworker/1:2-1810 [001] ...1 164.768409: rxrpc_call: c=00000002 SEE u=3 sp=rxrpc_process_call+0x25/0x7ae a=00000000442095b5
kworker/1:2-1810 [001] ...1 164.769439: rxrpc_tx_packet: c=00000002 e9f1a7a8:95786a88:00000008:09c5 00000001 00000000 02 22 ACK CallAck
kworker/1:2-1810 [001] ...1 164.769459: rxrpc_call: c=00000002 PUT u=2 sp=rxrpc_process_call+0x74f/0x7ae a=00000000442095b5
kworker/1:2-1810 [001] ...1 164.770794: afs_call: c=00000002 QUEUE u=3 o=12 sp=afs_deliver_to_call+0x449/0x72c
kworker/1:2-1810 [001] ...1 164.770829: afs_call: c=00000002 PUT u=2 o=12 sp=afs_process_async_call+0xdb/0x11e
kworker/1:2-1810 [001] ...2 164.771084: rxrpc_abort: c=00000002 95786a88:00000008 s=0 a=1 e=1 K-1
kworker/1:2-1810 [001] ...1 164.771461: rxrpc_tx_packet: c=00000002 e9f1a7a8:95786a88:00000008:09c5 00000002 00000000 04 00 ABORT CallAbort
kworker/1:2-1810 [001] ...1 164.771466: afs_call: c=00000002 PUT u=1 o=12 sp=SRXAFSCB_ProbeUuid+0xc1/0x106
The abort generated in SRXAFSCB_ProbeUuid(), labelled "K-1", indicates that
the local filesystem/cache manager didn't recognise the UUID as its own.
Fixes: 2067b2b3f484 ("afs: Fix the CB.ProbeUuid service handler to reply correctly")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Fix a couple of tracelines to indicate the usage count after the atomic op,
not the usage count before it to be consistent with other afs and rxrpc
trace lines.
Change the wording of the afs_call_trace_work trace ID label from "WORK" to
"QUEUE" to reflect the fact that it's queueing work, not doing work.
Fixes: 341f741f04be ("afs: Refcount the afs_call struct")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Fix the interruptibility of kernel-initiated client calls so that they're
either only interruptible when they're waiting for a call slot to come
available or they're not interruptible at all. Either way, they're not
interruptible during transmission.
This should help prevent StoreData calls from being interrupted when
writeback is in progress. It doesn't, however, handle interruption during
the receive phase.
Userspace-initiated calls are still interruptable. After the signal has
been handled, sendmsg() will return the amount of data copied out of the
buffer and userspace can perform another sendmsg() call to continue
transmission.
Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Pull NFS client bugfixes from Anna Schumaker:
"These are mostly fscontext fixes, but there is also one that fixes
collisions seen in fscache:
- Ensure the fs_context has the correct fs_type when mounting and
submounting
- Fix leaking of ctx->nfs_server.hostname
- Add minor version to fscache key to prevent collisions"
* tag 'nfs-for-5.6-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
nfs: add minor version to nfs_server_key for fscache
NFS: Fix leak of ctx->nfs_server.hostname
NFS: Don't hard-code the fs_type when submounting
NFS: Ensure the fs_context has the correct fs_type before mounting
|
|
Pull fuse fix from Miklos Szeredi:
"Fix an Oops introduced in v5.4"
* tag 'fuse-fixes-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix stack use after return
|
|
Pull overlayfs fixes from Miklos Szeredi:
"Fix three bugs introduced in this cycle"
* tag 'ovl-fixes-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix lockdep warning for async write
ovl: fix some xino configurations
ovl: fix lock in ovl_llseek()
|
|
During a rename whiteout, if btrfs_whiteout_for_rename() returns an error
we can end up returning from btrfs_rename() with the log context object
still in the root's log context list - this happens if 'sync_log' was
set to true before we called btrfs_whiteout_for_rename() and it is
dangerous because we end up with a corrupt linked list (root->log_ctxs)
as the log context object was allocated on the stack.
After btrfs_rename() returns, any task that is running btrfs_sync_log()
concurrently can end up crashing because that linked list is traversed by
btrfs_sync_log() (through btrfs_remove_all_log_ctxs()). That results in
the same issue that commit e6c617102c7e4 ("Btrfs: fix log context list
corruption after rename exchange operation") fixed.
Fixes: d4682ba03ef618 ("Btrfs: sync log after logging new name")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix here, improving the RCU callback ordering from last
week. After a bit more perusing by Paul, he poked a hole in the
original"
* tag 'io_uring-5.6-2020-03-13' of git://git.kernel.dk/linux-block:
io_uring: ensure RCU callback ordering with rcu_barrier()
|
|
afs_put_addrlist() casts kfree() to rcu_callback_t. Apart from being wrong
in theory, this might also blow up when people start enforcing function
types via compiler instrumentation, and it means the rcu_head has to be
first in struct afs_addr_list.
Use kfree_rcu() instead, it's simpler and more correct.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Move the code for verifying the iclog state on a clean unmount into a
helper, and instead of checking the iclog state just rely on the shutdown
check as they are equivalent. Also remove the ifdef DEBUG as the
compiler is smart enough to eliminate the dead code for non-debug builds.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
When the log is shut down all iclogs are in the XLOG_STATE_IOERROR state,
which means that xlog_state_want_sync and xlog_state_release_iclog are
no-ops. Remove the whole section of code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Remove the ignored return value from xfs_log_unmount_write, and also
remove a rather pointless assert on the return value from xfs_log_force.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
A shutdown log is a slow failure path. Add an unlikely annotation to
it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
This is much less widely used than the bc_private union was, so this
is done as a single patch. The named union xfs_btree_cur_private
goes away and is embedded into the struct xfs_btree_cur_ag as an
anonymous union, and the code is modified via this script:
$ sed -i 's/priv\.\([abt|refc]\)/\1/g' fs/xfs/*[ch] fs/xfs/*/*[ch]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
we need to name the btree cursor private structures to be able
to pull them out of the deeply nested structure definition they are
in now.
Based on code extracted from a patchset by Darrick Wong.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Rename the union and it's internal structures to the new name and
remove the temporary defines that facilitated the change.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
BPRV is not longer appropriate because bc_private is going away.
Script:
$ sed -i 's/BTCUR_BPRV/BTCUR_BMBT/g' fs/xfs/*[ch] fs/xfs/*/*[ch]
With manual cleanup to the definitions in fs/xfs/libxfs/xfs_btree.h
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: change "BC_BT" to "BTCUR_BMBT", fix subject line typo]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
bc_private.b -> bc_ino conversion via script:
$ sed -i 's/bc_private\.b/bc_ino/g' fs/xfs/*[ch] fs/xfs/*/*[ch]
And then revert the change to the bc_ino #define in
fs/xfs/libxfs/xfs_btree.h manually.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: tweak the subject line slightly]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
bc_private.a -> bc_ag conversion via script:
`sed -i 's/bc_private\.a/bc_ag/g' fs/xfs/*[ch] fs/xfs/*/*[ch]`
And then revert the change to the bc_ag #define in
fs/xfs/libxfs/xfs_btree.h manually.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Just the defines of the new names - the conversion will be in
scripted commits after this.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: change "bc_bt" to "bc_ino"]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Commit 263dde869bd09 ("xfs: cleanup xfs_dir2_block_getdents") introduced
a getdents regression, when it converted the pointer arithmetics to
offset calculations: offset is updated in the loop already for the next
iteration, but the updated offset value is used incorrectly in two
places, where we should have used the not-yet-updated value.
This caused for example "git clean -ffdx" failures to cleanup certain
directory structures when running in a container.
Fix the regression by making sure we use proper offset in the loop body.
Thanks to Christoph Hellwig for suggestion how to best fix the code.
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 263dde869bd09 ("xfs: cleanup xfs_dir2_block_getdents")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Lockdep reports "WARNING: lock held when returning to user space!" due to
async write holding freeze lock over the write. Apparently aio.c already
deals with this by lying to lockdep about the state of the lock.
Do the same here. No need to check for S_IFREG() here since these file ops
are regular-only.
Reported-by: syzbot+9331a354f4f624a52a55@syzkaller.appspotmail.com
Fixes: 2406a307ac7d ("ovl: implement async IO routines")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Fix up two bugs in the coversion to xino_mode:
1. xino=off does not always end up in disabled mode
2. xino=auto on 32bit arch should end up in disabled mode
Take a proactive approach to disabling xino on 32bit kernel:
1. Disable XINO_AUTO config during build time
2. Disable xino with a warning on mount time
As a by product, xino=on on 32bit arch also ends up in disabled mode.
We never intended to enable xino on 32bit arch and this will make the
rest of the logic simpler.
Fixes: 0f831ec85eda ("ovl: simplify ovl_same_sb() helper")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Minor overlapping changes, nothing serious.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Al Viro
David Howells
Linus Torvalds
Filipe Manana
Jann Horn
Christoph Hellwig
Dave Chinner
Tommi Rantala
Miklos Szeredi
Amir Goldstein
David S. Miller