aboutsummaryrefslogtreecommitdiffstats
path: root/include/asm-arm/arch-omap (follow)
AgeCommit message (Collapse)AuthorFilesLines
2007-03-16[PATCH] gpio_direction_output() needs an initial valueDavid Brownell1-1/+2
It's been pointed out that output GPIOs should have an initial value, to avoid signal glitching ... among other things, it can be some time before a driver is ready. This patch corrects that oversight, fixing - documentation - platforms supporting the GPIO interface - users of that call (just one for now, others are pending) There's only one user of this call for now since most platforms are still using non-generic GPIO setup code, which in most cases already couples the initial value with its "set output mode" request. Note that most platforms are clear about the hardware letting the output value be set before the pin direction is changed, but the s3c241x docs are vague on that topic ... so those chips might not avoid the glitches. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Andrew Victor <andrew@sanpeople.com> Acked-by: Milan Svoboda <msvoboda@ra.rockwell.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-02ARM: OMAP: Add missing get_irqnr_preamble and arch_ret_to_user for omap2Tony Lindgren1-0/+6
Only entries for omap1 were added earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Remove obsolete alsa typedefsTony Lindgren1-6/+6
Remove obsolete alsa typedefs Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: omap1510->15xx conversions needed for sx1Vladimir Ananiev1-1/+1
Convert 1510->15xx in generic omap code, so that sx1 can work. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-02-20Merge ARM fixesRussell King1-0/+66
2007-02-17[ARM] 4185/2: entry: introduce get_irqnr_preamble and arch_ret_to_userDan Williams1-0/+6
get_irqnr_preamble allows machines to take some action before entering the get_irqnr_and_base loop. On iop we enable cp6 access. arch_ret_to_user is added to the userspace return path to allow individual architectures to take actions, like disabling coprocessor access, before the final return to userspace. Per Nicolas Pitre's note, there is no need to cp_wait on the return to user as the latency to return is sufficient. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-12[PATCH] OMAP GPIO wrappersDavid Brownell1-0/+66
This teaches OMAP how to implement the cross-platform GPIO interfaces. [akpm@osdl.org: cleanups] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-05WorkQueue: Fix up arch-specific work items where possibleDavid Howells1-1/+1
Fix up arch-specific work items where possible to use the new work_struct and delayed_work structs. Three places that enqueue bits of their stack and then return have been marked with #error as this is not permitted. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-03fix file specification in commentsUwe Zeisberger3-3/+3
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-09-29[PATCH] OMAP: Add keypad driverKomal Shah1-0/+3
This patch adds support for keypad driver running on different TI OMAP(http://www.ti.com/omap) processor based boards like OSK, H2, H3, H4, Persuas and Nokia 770. Signed-off-by: Komal Shah <komal_shah802003@yahoo.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-25ARM: OMAP: Sync clocks with linux-omap treeTony Lindgren1-0/+1
Mostly clean up CONFIG_OMAP_RESET_CLOCKS. Also includes a patch from Imre Deak to make McSPI clocks use id. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Sync DMA with linux-omap treeTony Lindgren1-1/+11
This patch syncs OMAP DMA code with linux-omap tree. Mostly allow changing DMA callback function and set OMAP2 specific transfer mode. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Add enable/disable functions for dmtimerTimo Teras1-0/+2
Add enable/disable functions which effectively control the GPT iclk and fclk. Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: DMA source and destination addresses are unsignedTony Lindgren1-2/+2
Also export some omap24xx specific DMA functions. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP2: Dynamic allocator for GPMC memory spaceImre Deak1-2/+2
Add support for assigning memory regions dynamically to peripherals attached to GPMC interface. Platform specific code should now call gpmc_cs_request to get a free GPMC memory region instead of using a fixed address. Make the H4 and Apollon platform initialization use the new API. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Add some extra #defines for Amstrad DeltaJonathan McDowell1-0/+11
This patch adds some further #defines regarding GPIOs and latch bits for the Amstrad Delta; the drivers that use them will be submitted at a later date but there's no reason not to have the information already there and available for use. Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: mux: add config for 16xx SPI pinsMark Howell1-0/+11
This patch adds pin mux info for the SPI master/slave interface on OMAP16xx. Data from OMAP 1611/1612 TRM and errata. Works for me on my 1611/H2 with current git kernel. Signed-off-by: Mark Howell <mhowell@northlink.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Apollon MMC supportKyungmin Park2-0/+15
Apollon board MMC supports on OMAP2 TODO: We have to check MMC on H4 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Added OMAP24xx camera IRQ definitionSamuel Ortiz1-0/+1
Signed-off-by: Samuel Ortiz <samuel.ortiz@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-08-02[ARM] 3743/1: ARM: OMAP: Fix compile for OMAPTony Lindgren1-2/+0
Patch from Tony Lindgren "clocks" is only needed only for CONFIG_OMAP_RESET_CLOCKS, which turns of all unused clocks in with late_initcall. This is to kill clocks that may have been left on by the bootloader. Having static and non-static declaration of clocks makes omap_h2_1610_defconfig build fail. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-26ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoringTony Lindgren1-0/+6
Multiplexing for 24xx GPMC wait pin monitoring Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Update dmtimersTimo Teras1-0/+1
- Initialize timer outside of spinlock to reduce the time the spinlock is held - Do clk_get to the source clocks during initialization to avoid sleeping later - New function to set counter register Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Mux updates for external DMA and GPIOTony Lindgren1-0/+20
Mux updates for external DMA and GPIO. GPIO updates by Igor Stoppa. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Add OMAP_TAG_CAMERA_SENSORSamuel Ortiz1-0/+7
Add platform config data for camera sensors. Since it includes pointers, it should not be passed from the bootloader. Signed-off-by: Samuel Ortiz <samuel.ortiz@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Add initial 24xx suspend supportTony Lindgren2-0/+35
This patch adds support for omap24xx power domains and allows suspend to work. Please note that for some reason core power domain still does not seem to idle. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Add GPMC support for OMAP2Juha Yrjola1-0/+91
Implement basic support for General-Purpose Memory Controller as found on OMAP2420. Dynamic CS address space allocation still needs to be done. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Fix DMA channel irq handling for omap24xxTony Lindgren1-4/+7
- DMA CSR register is cleared by reading on omap1, but on omap2 it is cleard by writing to it. - DMA TOUT interrupt does not exist on omap24xx, rename it - Add SECURE and MISALIGNED errors by default for omap24xx - Add defines for external DMA request lines Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: OMAP2 DMA burst supportKyungmin Park1-2/+2
OMAP2 DMA burst setting support Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Port dmtimers to OMAP2 and implement PWM supportTimo Teras2-46/+45
Port dmtimer framework to OMAP2. Modify the dmtimers API to support setting of PWM configuration and prescaler. Convert 32 kHz timer and GP timer to use the dmtimer framework. Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Add core fsample supportBrian Swetland2-0/+55
This patch adds core support for the TI F-Sample Board (OMAP 850). Signed-off-by: Brian Swetland <swetland@google.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-24[ARM] 3631/1: Remove legacy __mem_isa() definitionsAndrew Victor1-1/+0
Patch from Andrew Victor Remove the remaining legacy __mem_isa() definitions for the ARM platforms. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-26Don't include linux/config.h from anywhere else in include/David Woodhouse4-4/+0
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-02[ARM] 3433/1: ARM: OMAP: 8/8 Update board filesTony Lindgren10-45/+196
Patch from Tony Lindgren This patch syncs OMAP board support with linux-omap tree. The highlights of the patch are: - Add support for Nokia 770 by Juha Yrjola - Add support for Samsung Apollon by Kyungmin Park - Add support for Amstrad E3 videophone by Jonathan McDowell - Remove board-netstar.c board support as requested by Ladislav Michl - Do platform_device registration in board files by Komal Shah et al. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3455/1: ARM: OMAP: 7/8 Misc updates, take 2Tony Lindgren11-7/+324
Patch from Tony Lindgren Update misc OMAP core code from linux-omap tree: - McBSP updates by Samuel Ortiz, Andrzej Zaborowski - Whitespace cleanups by Ladislav Michl - Other fixes by various linux-omap developers Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3454/1: ARM: OMAP: 6/8 Update framebuffer low-level init code, take 2Tony Lindgren3-27/+86
Patch from Tony Lindgren Update OMAP framebuffer low-level init code from linux-omap tree by Imre Deak. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3430/1: ARM: OMAP: 5/8 Update PMTony Lindgren2-8/+75
Patch from Tony Lindgren Update OMAP PM code from linux-omap tree: - Move PM code from plat-omap to mach-omap1 and mach-omap2 by Tony Lindgren - Add minimal PM support for omap24xx by Tony Lindgren and Richard Woodruff - Misc updates to omap1 PM code by Tuukka Tikkanen et al - Updates to the SRAM code needed for PM and FB by Imre Deak Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3428/1: ARM: OMAP: 3/8 Update pin multiplexingTony Lindgren1-3/+51
Patch from Tony Lindgren Update OMAP pin multiplexing code from linux-omap tree. This patch adds new pin configurations by various OMAP developers, and suport for omap730 by Brian Swetland. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3427/1: ARM: OMAP: 2/8 Update timersTony Lindgren2-0/+9
Patch from Tony Lindgren Update OMAP timers from linux-omap tree. The highlights of the patch are: - Move timer32k code from mach-omap1 to plat-omap and make it work also on omap24xx by Tony Lindgren - Add support for dmtimer idle check for PM by Tuukka Tikkanen Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3426/1: ARM: OMAP: 1/8 Update clock frameworkTony Lindgren3-419/+15
Patch from Tony Lindgren Update OMAP clock framework from linux-omap tree. The highlights of the patch are: - Add support for omap730 clocks by Andrzej Zaborowski - Fix compile warnings by Dirk Behme - Add support for using dev id by Tony Lindgren and Komal Shah - Move memory timings and PRCM into separate files by Tony Lindgren Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-28[ARM] Fix decompressor serial IO to give CRLF not LFCRRussell King1-12/+8
As per the corresponding change to the serial drivers, arrange for ARM decompressors to give CRLF. Move the common putstr code into misc.c such that machines only need to supply "putc" and "flush" functions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] Move HZ definition into KconfigRussell King1-8/+0
Move the HZ definition into Kconfig, and set appropriate defaults for platforms. Remove mostly empty asm/arch/param.h include file. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3279/1: OMAP: 1/3 Fix low-level io initTony Lindgren1-1/+5
Patch from Tony Lindgren This patch adds the missing cache flushes to common low-level init that are needed to access the IO region. These flushes are normally done at the end of devicemaps_init(), but we need to detect the OMAP core type early. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-17ARM: OMAP: 1/4 Fix clock framework to use clk_enable/disableTony Lindgren1-2/+0
This patch fixes OMAP clock framework to use clk_enable/disable instead of clk_use/unuse as specified in include/linux/clk.h. Instances of clk_use/unuse are renamed to clk_enable/disable, and references clk_use/unuse are removed. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-01-07[ARM] Move asm/hardware/clock.h to linux/clk.hRussell King1-1/+2
This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04[ARM] Remove definition of MAX_DMA_CHANNELS to zeroRussell King1-2/+0
Since we now only build arch/arm/kernel/dma.c on machine types which set ISA_DMA_API, we don't need to define MAX_DMA_CHANNELS to 0 to indicate this - this definition becomes superfluous. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04[ARM] Move common definition of MAX_DMA_ADDRESS to asm/dma.hRussell King1-1/+0
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03[ARM] Cleanup ARM includesRussell King1-0/+2
arch/arm/kernel/entry-armv.S has contained a comment suggesting that asm/hardware.h and asm/arch/irqs.h should be moved into the asm/arch/entry-macro.S include. So move the includes to these two files as required. Add missing includes (asm/hardware.h, asm/io.h) to asm/arch/system.h includes which use those facilities, and remove asm/io.h from kernel/process.c. Remove other unnecessary includes from arch/arm/kernel, arch/arm/mm and arch/arm/mach-footbridge. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-16[ARM] Include asm/hardware.h instead of asm/arch/hardware.hRussell King4-4/+4
Rationalise hardware.h include. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[ARM] 3144/1: OMAP 5/5: Update omap H2 defconfigTony Lindgren1-0/+2
Patch from Tony Lindgren This patch updates omap H2 defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[ARM] 3143/1: OMAP 4/5: Update omap include filesTony Lindgren24-360/+1370
Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. This patch contains changes to common header files for omap1xxx and omap24xx by various omap developers, and improved cpu detection by Imre Deak Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.