aboutsummaryrefslogtreecommitdiffstats
path: root/include/asm-blackfin (follow)
AgeCommit message (Collapse)AuthorFilesLines
2008-07-26[PATCH] kill altrootAl Viro1-19/+0
long overdue... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6Linus Torvalds20-205/+165
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (30 commits) Blackfin arch: If we double fault, rather than hang forever, reset Blackfin arch: When icache is off, make sure people know it Blackfin arch: Fix bug - skip single step in high priority interrupt handler instead of disabling all interrupts in single step debugging. Blackfin arch: cache the values of vco/sclk/cclk as the overhead of doing so (~24 bytes) is worth avoiding the software mult/div routines Blackfin arch: fix bug - IMDMA is not type struct dma_register Blackfin arch: check the EXTBANKS field of the DDRCTL1 register to see if we are using both memory banks Blackfin arch: Apply Bluetechnix CM-BF527 board support patch Blackfin arch: Add unwinding for stack info, and a little more detail on trace buffer Blackfin arch: Add ISP1760 board resources to BF548-EZKIT Blackfin arch: fix bug - detect 0.1 silicon revision BF527-EZKIT as 0.0 version Blackfin arch: add missing IORESOURCE_MEM flags to UART3 Blackfin arch: Add return value check in bfin_sir_probe(), remove SSYNC(). Blackfin arch: Extend sram malloc to handle L2 SRAM. Blackfin arch: Remove useless config option. Blackfin arch: change L1 malloc to base on slab cache and lists. Blackfin arch: use local labels and ENDPROC() markings Blackfin arch: Do not need this dualcore test module in kernel. Blackfin arch: Allow ptrace to peek and poke application data in L1 data SRAM. Blackfin arch: Add ANOMALY_05000368 workaround Blackfin arch: Functional power management support ...
2008-07-25Merge git://git.infradead.org/~dwmw2/random-2.6Linus Torvalds1-6/+0
* git://git.infradead.org/~dwmw2/random-2.6: remove dummy asm/kvm.h files firmware: create firmware binaries during 'make modules'.
2008-07-25remove dummy asm/kvm.h filesAdrian Bunk1-6/+0
This patch removes the dummy asm/kvm.h files on architectures not (yet) supporting KVM and uses the same conditional headers installation as already used for a.out.h . Also removed are superfluous install rules in the s390 and x86 Kbuild files (they are already in Kbuild.asm). Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-25include/asm/ptrace.h userspace headers cleanupAdrian Bunk1-2/+4
This patch contains the following cleanups for the asm/ptrace.h userspace headers: - include/asm-generic/Kbuild.asm already lists ptrace.h, remove the superfluous listings in the Kbuild files of the following architectures: - cris - frv - powerpc - x86 - don't expose function prototypes and macros to userspace: - arm - blackfin - cris - mn10300 - parisc - remove #ifdef CONFIG_'s around #define's: - blackfin - m68knommu - sh: AFAIK __SH5__ should work in both kernel and userspace, no need to leak CONFIG_SUPERH64 to userspace - xtensa: cosmetical change to remove empty #ifndef __ASSEMBLY__ #else #endif from the userspace headers Not changed by this patch is the fact that the following architectures have a different struct pt_regs depending on CONFIG_ variables: - h8300 - m68knommu - mips This does not work in userspace. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: <linux-arch@vger.kernel.org> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Grant Grundler <grundler@parisc-linux.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Chris Zankel <chris@zankel.net> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25clean up duplicated alloc/free_thread_infoFUJITA Tomonori1-4/+1
We duplicate alloc/free_thread_info defines on many platforms (the majority uses __get_free_pages/free_pages). This patch defines common defines and removes these duplicated defines. __HAVE_ARCH_THREAD_INFO_ALLOCATOR is introduced for platforms that do something different. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds1-27/+0
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (76 commits) ide: use proper printk() KERN_* levels in ide-probe.c ide: fix for EATA SCSI HBA in ATA emulating mode ide: remove stale comments from drivers/ide/Makefile ide: enable local IRQs in all handlers for TASKFILE_NO_DATA data phase ide-scsi: remove kmalloced struct request ht6560b: remove old history ht6560b: update email address ide-cd: fix oops when using growisofs gayle: release resources on ide_host_add() failure palm_bk3710: add UltraDMA/100 support ide: trivial sparse annotations ide: ide-tape.c sparse annotations and unaligned access removal ide: drop 'name' parameter from ->init_chipset method ide: prefix messages from IDE PCI host drivers by driver name it821x: remove DECLARE_ITE_DEV() macro it8213: remove DECLARE_ITE_DEV() macro ide: include PCI device name in messages from IDE PCI host drivers ide: remove <asm/ide.h> for some archs ide-generic: remove ide_default_{io_base,irq}() inlines (take 3) ide-generic: is no longer needed on ppc32 ...
2008-07-24ide: remove <asm/ide.h> for some archsBartlomiej Zolnierkiewicz1-25/+0
* Remove <linux/irq.h> include from <asm-ia64.h> (<linux/ide.h> includes <linux/interrupt.h> which is enough). * Remove <asm/ide.h> for alpha/blackfin/h8300/ia64/m32r/sh/x86/xtensa (this leaves us with arm/frv/m68k/mips/mn10300/parisc/powerpc/sparc[64]). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24ide: define MAX_HWIFS in <linux/ide.h>Bartlomiej Zolnierkiewicz1-2/+0
* Now that ide_hwif_t instances are allocated dynamically the difference between MAX_HWIFS == 2 and MAX_HWIFS == 10 is ~100 bytes (x86-32) so use MAX_HWIFS == 10 on all archs except these ones that use MAX_HWIFS == 1. * Define MAX_HWIFS in <linux/ide.h> instead of <asm/ide.h>. [ Please note that avr32/cris/v850 have no <asm/ide.h> and alpha/ia64/sh always define CONFIG_IDE_MAX_HWIFS. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24Merge branch 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/miscLinus Torvalds1-1/+0
* 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: Remove __DECLARE_SEMAPHORE_GENERIC Remove asm/semaphore.h Remove use of asm/semaphore.h Add missing semaphore.h includes Remove mention of semaphores from kernel-locking
2008-07-24PAGE_ALIGN(): correctly handle 64-bit values on 32-bit architecturesAndrea Righi1-3/+0
On 32-bit architectures PAGE_ALIGN() truncates 64-bit values to the 32-bit boundary. For example: u64 val = PAGE_ALIGN(size); always returns a value < 4GB even if size is greater than 4GB. The problem resides in PAGE_MASK definition (from include/asm-x86/page.h for example): #define PAGE_SHIFT 12 #define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) ... #define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) The "~" is performed on a 32-bit value, so everything in "and" with PAGE_MASK greater than 4GB will be truncated to the 32-bit boundary. Using the ALIGN() macro seems to be the right way, because it uses typeof(addr) for the mask. Also move the PAGE_ALIGN() definitions out of include/asm-*/page.h in include/linux/mm.h. See also lkml discussion: http://lkml.org/lkml/2008/6/11/237 [akpm@linux-foundation.org: fix drivers/media/video/uvc/uvc_queue.c] [akpm@linux-foundation.org: fix v850] [akpm@linux-foundation.org: fix powerpc] [akpm@linux-foundation.org: fix arm] [akpm@linux-foundation.org: fix mips] [akpm@linux-foundation.org: fix drivers/media/video/pvrusb2/pvrusb2-dvb.c] [akpm@linux-foundation.org: fix drivers/mtd/maps/uclinux.c] [akpm@linux-foundation.org: fix powerpc] Signed-off-by: Andrea Righi <righi.andrea@gmail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24Remove asm/semaphore.hMatthew Wilcox1-1/+0
All users have now been converted to linux/semaphore.h and we don't need to keep these files around any longer. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-07-19Blackfin arch: fix bug - detect 0.1 silicon revision BF527-EZKIT as 0.0 versionMichael Hennerich1-1/+20
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-19Blackfin arch: Add return value check in bfin_sir_probe(), remove SSYNC().Graf Yang5-30/+75
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-19Blackfin arch: Extend sram malloc to handle L2 SRAM.Sonic Zhang3-3/+12
Extend system call to alloc L2 SRAM in application. Automatically move following sections to L2 SRAM: 1. kernel built-in l2 attribute section 2. kernel module l2 attribute section 3. elf-fdpic application l2 attribute section Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-19Blackfin arch: Functional power management supportMichael Hennerich4-63/+54
Enable: PM_SUSPEND_MEM -> Blackfin Hibernate to SDRAM This feature requires a special bootloader (u-boot) supporting return from hibernate. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-15Blackfin arch: add TXDWA definition to enable new featureBryan Wu3-0/+4
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-14Blackfin arch: Fix bug - Kernel does not boot if re-program clocksMichael Hennerich4-108/+0
Don't write conflicting data to EBIU_SDBCTL after the SDRAM is configured. This can cause data corruption, since we might change SDRAM row and column addressing modes. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-06-19Blackfin Serial Driver: Use timer to poll CTS PIN instead of workqueue.Sonic Zhang5-5/+5
This allows other threads to run when the serial driver polls the CTS PIN in a loop. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-06-19Blackfin arch: fix typo error in bf548 serial header fileSonic Zhang1-2/+2
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-06-03Blackfin Serial Driver: Clean up BF54x macro in blackfin UART driver.Sonic Zhang5-0/+30
Hide difference in head file. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-31Blackfin arch: update anomaly headers from toolchain trunkMike Frysinger5-23/+27
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-31Blackfin arch: Remove bad and usless codeMichael Hennerich1-7/+0
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-17Blackfin serial driver: add extra IRQ flag for 8250 serial driverJavier Herrero1-0/+5
Signed-off-by: Javier Herrero <jherrero@hvsistemas.es> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-19Blackfin arch: Fix bug - USB fails to build for BF524/BF526Bryan Wu1-4/+4
BF524 is the same as BF525, except the speed of the processor BF526 is the same as BF527, except the speed of the processor Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-17Blackfin arch: IO Port functions to read/write unalligned memoryMichael Hennerich1-0/+2
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-17Blackfin arch: enable a choice to provide 4M DMA memoryCliff Cai1-1/+3
support two cascaded AD73322 cards, more uncached DMA memory is needed, so add a choice to provide 4M DMA memory Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-17Blackfin arch: Add workaround to read edge triggered GPIOsMichael Hennerich1-1/+0
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-17Blackfin arch: Sync channel defines with struct dma_register dma_io_base_addr.Michael Hennerich1-4/+4
Otherwise we use the wrong DMA channels. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-12[Blackfin] arch: Blackfin checksum annotationsAl Viro1-15/+14
FSVOtest in this case, since I don't have the hardware... However, all changes seen by gcc are actually - explicit cast to unsigned short in return expression of functions returning unsigned short - csum_fold() return type changed from unsigned int to __sum16 (unsigned short), same as for all other architecture and as net/* expects; expression actually returned is ((~(sum << 16)) >> 16) with sum being unsigned 32bit, so it's (a) going to fit into the range of unsigned short and (b) had been unsigned all along, so no sign expansion mess happened. Tested-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Miller <davem@davemloft.net> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07Blackfin Serial Driver: abstract away DLAB differences into headerMike Frysinger5-0/+15
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07Blackfin Serial Driver: macro away the IER differences between processorsMike Frysinger4-0/+8
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-10[Blackfin] arch: remove useless IRQ_SW_INT definesMichael Hennerich3-34/+28
IRQ_SW_INT1 and IRQ_SW_INT2 obsolete: Remove useless defines Fix SYS_IRQS Keep numbering scheme, so we don't break existing configurations. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07[Blackfin] arch: fix gdb testing regressionBernd Schmidt2-0/+10
When transferring to IRQ5 from an exception, save SYSCFG in memory across the transfer and clear the trace bit. When we get a single step exception, check whether we can safely clear the trace bit in SYSCFG. We can (and should) clear it after the first instruction of the interrupt handler; the first insn saves SYSCFG to the stack in all handlers. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07[Blackfin] arch: Support for CPU_FREQ and NOHZVitja Makarov1-0/+4
Singed-off-by: Vitja Makarov <vitja.makarov@gmail.com>
2008-05-07[Blackfin] arch: Functional power management support: Add CPU and platform voltage scaling supportMichael Hennerich1-1/+9
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07[Blackfin] arch: Equalize include files: Add VR_CTL masksMichael Hennerich3-0/+50
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-02blackfin: types: use <asm-generic/int-*.h> for the blackfin architectureH. Peter Anvin1-32/+2
This modifies <asm-blackfin/types.h> to use the <asm-generic/int-*.h> generic include files. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Bryan Wu <cooloney@kernel.org>
2008-04-29kernel: Move arches to use common unaligned accessHarvey Harrison1-4/+9
Unaligned access is ok for the following arches: cris, m68k, mn10300, powerpc, s390, x86 Arches that use the memmove implementation for native endian, and the byteshifting for the opposite endianness. h8300, m32r, xtensa Packed struct for native endian, byteshifting for other endian: alpha, blackfin, ia64, parisc, sparc, sparc64, mips, sh m86knommu is generic_be for Coldfire, otherwise unaligned access is ok. frv, arm chooses endianness based on compiler settings, uses the byteshifting versions. Remove the unaligned trap handler from frv as it is now unused. v850 is le, uses the byteshifting versions for both be and le. Remove the now unused asm-generic implementation. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-25[Blackfin] arch: add include/boot .gitignore filesMike Frysinger1-0/+1
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25[Blackfin] arch: Functional power management support: Add support for cpu frequency scalingMichael Hennerich1-0/+36
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25[Blackfin] arch: Equalize include files: Add PLL_DIV MasksMichael Hennerich1-0/+2
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25[Blackfin] arch: add Blackfin on-chip SIR IrDA driver supportGraf Yang15-82/+891
- add platform device resources in board files - add new bfin_sir.h to each machines Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25[Blackfin] arch: Update anomaly list.Sonic Zhang5-18/+96
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: Clean up the definition and correct the commentary for current_thread_info().Robert P. J. Day1-7/+4
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: define our own BUG() so we can dump the blackfin hardware trace bufferMike Frysinger1-0/+13
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: Prevent potential Core Hang situationMichael Hennerich5-18/+172
If the new value written to the PLL_CTL or VR_CTL register is the same as the previous value, the PLL wake-up will occur immediately (PLL is already locked), but the core and system clock will be bypassed for the PLL_LOCKCNT duration. For this interval, code will execute at the CLKIN rate instead of at the expected CCLK rate. Software should guard against this condition by comparing the current value to the new value before writing the new value. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: Give the DMA base registers a more descriptive nameBernd Schmidt6-14/+3
The DMA base registers are available in a global named "base_addr" for every Blackfin variant. Give this a more descriptive name, and remove duplicate tables from some drivers. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: actually implement get_cycles functionMike Frysinger1-6/+11
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: remove duplicated prototypes for internal cplb structures from the global blackfin headerMike Frysinger1-9/+0
remove duplicated prototypes for internal cplb structures from the global blackfin header as nothing else should be accessing these Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.