aboutsummaryrefslogtreecommitdiffstats
path: root/include/asm-mips/sibyte (follow)
AgeCommit message (Collapse)AuthorFilesLines
2007-10-22[MIPS] time: SMP-proofing of Sibyte clockevent/clocksource code.Ralf Baechle1-2/+0
The BCM148 has 4 cores but there are also just 4 generic timers available so use the ZBbus cycle counter instead of it. In addition the ZBbus counter also offers a much higher resolution and 64-bit counting so I'm considering a later complete conversion to it once I figure out if all members of the Sibyte SOC family support it - the docs seem to agree but the headers files seem to disagree ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] checkfiles: Fix "need space after that ','" errors.Ralf Baechle19-1415/+1415
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-09-11BCM1480 serial build fixThiemo Seufer1-0/+5
Restores serial functionality for the BCM1480. Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17sb1250-duart.c: SB1250 DUART serial supportMaciej W. Rozycki3-45/+68
This is a driver for the SB1250 DUART, a dual serial port implementation included in the Broadcom family of SOCs descending from the SiByte SB1250 MIPS64 chip multiprocessor. It is a new implementation replacing the old-fashioned driver currently present in the linux-mips.org tree. It supports all the usual features one would expect from a(n asynchronous) serial driver, including modem line control (as far as hardware supports it -- there is edge detection logic missing from the DCD and RI lines and the driver does not implement polling of these lines at the moment), the serial console, BREAK transmission and reception, including the magic SysRq. The receive FIFO threshold is not maintained though. The driver was tested with a SWARM board which uses a BCM1250 SOC (which is dual MIPS64 CMP) and has both ports of the single DUART implemented wired externally. Both were tested. Testing included using the ports as terminal lines at 1200bps (which is the ports minimum), 115200bps and a couple of random speeds inbetween. The modem lines were verified to operate correctly. No testing was performed with a use as a network interface, like with SLIP or PPP. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-27[MIPS] Updated Sibyte headersMark Mason12-107/+175
This is an update to the earlier patch for the sibyte headers, and superceeds the previous patch. Changes were necessary to get the tbprof driver working on the bcm1480. Patch to update Sibyte header files to match master versions maintained at Broadcom. This patch also corrects some whitespace problems, and (hopefully) shouldn't introduce any new ones. Signed-off-by: Mark Mason <mason@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-04-20[MIPS] Add missing silicon revisions for BCM112xMark Mason1-0/+1
Recent versions of the BCM112X processors aren't recognized by Linux (preventing Linux from booting on those processors). This patch adds support for those that are missing. Signed-off-by: Mark Mason <mason@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-24[MIPS] SB1250: Fix bugs/warnings by creative use of volatile.Ralf Baechle1-1/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-09[MIPS] Sibyte: Fix ZBbus profilerRalf Baechle1-110/+0
o Fix build error. o Handle error returns. o Deal with signals received while sleeping. o Don't allow to be selected when we're not building the directory with the driver anyway. o Coding style cleanups. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04[MIPS] Fix and cleanup the mess that a dozen prom_printf variants are.Ralf Baechle1-2/+0
early_printk is a so much saner thing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-31[MIPS] Fixup migration to GENERIC_TIMEAtsushi Nemoto1-1/+1
Since we already moved to GENERIC_TIME, we should implement alternatives of old do_gettimeoffset routines to get sub-jiffies resolution from gettimeofday(). This patch includes: * MIPS clocksource support (based on works by Manish Lachwani). * remove unused gettimeoffset routines and related codes. * remove unised 64bit do_div64_32(). * simplify mips_hpt_init. (no argument needed, __init tag) * simplify c0_hpt_timer_init. (no need to write to c0_count) * remove some hpt_init routines. * mips_hpt_mask variable to specify bitmask of hpt value. * convert jmr3927_do_gettimeoffset to jmr3927_hpt_read. * convert ip27_do_gettimeoffset to ip27_hpt_read. * convert bcm1480_do_gettimeoffset to bcm1480_hpt_read. * simplify sb1250 hpt functions. (no need to subtract and shift) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] s/__ASSEMBLER__/__ASSEMBLY__/ for clarity sake.Ralf Baechle2-4/+4
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-26Don't include linux/config.h from anywhere else in include/David Woodhouse4-4/+0
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-03-18[MIPS] Sibyte: Fix race in sb1250_gettimeoffset().Ralf Baechle1-1/+1
From Dave Johnson <djohnson+linuxmips@sw.starentnetworks.com>: sb1250_gettimeoffset() simply reads the current cpu 0 timer remaining value, however once this counter reaches 0 and the interrupt is raised, it immediately resets and begins to count down again. If sb1250_gettimeoffset() is called on cpu 1 via do_gettimeofday() after the timer has reset but prior to cpu 0 processing the interrupt and taking write_seqlock() in timer_interrupt() it will return a full value (or close to it) causing time to jump backwards 1ms. Once cpu 0 handles the interrupt and timer_interrupt() gets far enough along it will jump forward 1ms. Fix this problem by implementing mips_hpt_*() on sb1250 using a spare timer unrelated to the existing periodic interrupt timers. It runs at 1Mhz with a full 23bit counter. This eliminated the custom do_gettimeoffset() for sb1250 and allowed use of the generic fixed_rate_gettimeoffset() using mips_hpt_*() and timerhi/timerlo. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18[MIPS] Sibyte: Fix M_SCD_TIMER_INIT and M_SCD_TIMER_CNT wrong field width.Ralf Baechle1-2/+3
From Dave Johnson <djohnson+linuxmips@sw.starentnetworks.com>: Field width should be 23 bits not 20 bits. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Support for BigSur board.Andrew Isaacson2-0/+53
Signed-Off-By: Andy Isaacson <adi@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Sibyte header cleanupAndrew Isaacson14-30/+7
Update sibyte headers to match Broadcom internal copies: - comment cleanup and updates - fix LittleSur part number to match the board silkscreen Signed-Off-By: Andy Isaacson <adi@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29BCM1480 headersAndrew Isaacson17-98/+3236
Add header files for BCM1480/1280/1455/1255 family of chips, and update sb1250 headers which are shared by BCM1480 family. Signed-Off-By: Andy Isaacson <adi@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> diff --git a/include/asm-mips/sibyte/bcm1480_int.h b/include/asm-mips/sibyte/bcm1480_int.h new file mode 100644
2005-10-29Cleanup Sibyte Kconfig a bit further.Ralf Baechle1-14/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Sparseify MIPS.Ralf Baechle1-1/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Switch SiByte drivers back to __raw_*() functions.Maciej W. Rozycki1-1/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Fix compilation; by Manish Lachwani.Maciej W. Rozycki1-0/+2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-09-05[PATCH] mips: nuke trailing whitespaceRalf Baechle14-209/+209
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds19-0/+5607
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.