aboutsummaryrefslogtreecommitdiffstats
path: root/include/crypto (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-24dt-binding: ptp_qoriq: support ENETC PTP compatibleY.b. Lu1-0/+1
Add a new compatible for ENETC PTP. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-24enetc: add get_ts_info interface for ethtoolY.b. Lu3-0/+39
This patch is to add get_ts_info interface for ethtool to support getting timestamping capability. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-24enetc: add hardware timestamping supportY.b. Lu6-6/+189
This patch is to add hardware timestamping support for ENETC. On Rx, timestamping is enabled for all frames. On Tx, we only instruct the hardware to timestamp the frames marked accordingly by the stack. Because the RX BD ring dynamic allocation has not been supported and it is too expensive to use extended RX BDs if timestamping is not used, a Kconfig option is used to enable extended RX BDs in order to support hardware timestamping. This option will be removed once RX BD ring dynamic allocation is implemented. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23net: ll_temac: Fix compile errorEsben Haabendal1-2/+1
Fixes: 1b3fa5cf859b ("net: ll_temac: Cleanup multicast filter on change") Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23ice: Silence semantic parser warningsBruce Allan2-4/+4
Recent versions of sparse warn about casting pointers to/from restricted endian types in the Linux driver. Silence those with the compiler attribute __force macro from the Linux kernel to force casts to/from restricted endian types. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Fix couple of issues in ice_vsi_releaseBrett Creeley3-13/+14
Currently the driver is calling ice_napi_del() and then unregister_netdev(). The call to unregister_netdev() will result in a call to ice_stop() and then ice_vsi_close(). This is where we call napi_disable() for all the MSI-X vectors. This flow is reversed so make the changes to ensure napi_disable() happens prior to napi_del(). Before calling napi_del() and free_netdev() make sure unregister_netdev() was called. This is done by making sure the __ICE_DOWN bit is set in the vsi->state for the interested VSI. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Reorganize ice_vf structJesse Brandeburg1-8/+13
The ice_vf struct can be used hundreds of times in our driver so it pays to use less memory per struct. ice_vf prior to this commit: /* size: 112, cachelines: 2, members: 25 */ /* sum members: 101, holes: 4, sum holes: 8 */ /* bit holes: 2, sum bit holes: 11 bits */ /* padding: 3 */ /* last cacheline: 48 bytes */ ice_vf after this commit: /* size: 104, cachelines: 2, members: 25 */ /* sum members: 100, holes: 3, sum holes: 4 */ /* bit holes: 1, sum bit holes: 3 bits */ /* last cacheline: 40 bytes */ Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Use bitfields when possibleJesse Brandeburg3-11/+11
We can use bit fields to store boolean values and when the bit fields are next to each other, the compiler will combine them (as long as the size holds enough). Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Reorganize tx_buf and ring structsJesse Brandeburg1-14/+21
Use more efficient structure ordering by using the pahole tool and a lot of code inspection to get hot cache lines to have packed data (no holes if possible) and adjacent warm data. ice_ring prior to this change: /* size: 192, cachelines: 3, members: 23 */ /* sum members: 158, holes: 4, sum holes: 12 */ /* padding: 22 */ ice_ring after this change: /* size: 192, cachelines: 3, members: 25 */ /* sum members: 162, holes: 1, sum holes: 1 */ /* padding: 29 */ ice_tx_buf prior to this change: /* size: 48, cachelines: 1, members: 7 */ /* sum members: 38, holes: 2, sum holes: 6 */ /* padding: 4 */ /* last cacheline: 48 bytes */ ice_tx_buf after this change: /* size: 40, cachelines: 1, members: 7 */ /* sum members: 38, holes: 1, sum holes: 2 */ /* last cacheline: 40 bytes */ Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Format ethtool reported statsRichard Rodriguez1-54/+54
Fixes ethtool -S reported stats in ice driver to match format and nomenclature of the ixgbe driver. Signed-off-by: Richard Rodriguez <richard.rodriguez@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Gracefully handle reset failure in ice_alloc_vfs()Brett Creeley1-2/+9
Currently if ice_reset_all_vfs() fails in ice_alloc_vfs() we fail to free some resources, reset variables, and return an error value. Fix this by adding another unroll case to free the pf->vf array, set the pf->num_alloc_vfs to 0, and return an error code. Without this, if ice_reset_all_vfs() fails in ice_alloc_vfs() we will not be able to do SRIOV without hard rebooting the system because rmmod'ing the driver does not work. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Refactor the LLDP MIB change event handlingUsha Ketineni3-22/+140
This patch fixes the LLDP MIB change event handling code by removing the workarounds in the current code. Added ice_dcb_need_recfg() to print the DCB configuration changes detected via MIB change event. Signed-off-by: Usha Ketineni <usha.k.ketineni@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Advertise supported link modes if none requestedTony Nguyen1-25/+50
User requested link modes affect what is returned as an advertised link mode. If no modes have been requested, we are not advertising any link modes. Advertise what we are capable of supporting if no link modes have been requested. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Fix hang when ethtool disables FW LLDPDave Ertman4-17/+25
When disabling and enabling VSIs, there are a couple of flows that recursively acquire the RTNL lock which causes a deadlock. Fix that. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Call out dev/func caps when printingAnirudh Venkataramanan1-26/+30
ice_parse_caps is used to parse both device and function capabilities. Currently, capabilities are printed with a cryptic "HW caps" prefix, which makes it difficult to distinguish whether the capabilities being printed are device or function capabilities. This patch makes a change to add a "func cap" prefix when printing function capabilities, and a "dev cap" prefix when printing device capabilities. This patch also changes some of the capability print strings for consistency. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Remove braces for single statement blocksAnirudh Venkataramanan1-2/+1
Fix checkpatch warning "WARNING:BRACES: braces {} are not necessary for single statement blocks" Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Cleanup an unnecessary variable initializationBruce Allan1-3/+3
Commit 3463688e6ced ("ice: Add more validation in ice_vc_cfg_irq_map_msg") added an assignment of vsi making the assignment during declaration unnecessary. Also, cleanup the declaration and assignment of irqmap_info to not use two lines in the variable declaration section. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Implement LLDP persistenceAnirudh Venkataramanan5-37/+29
Implement LLDP persistence across reboots, start and stop of LLDP agent. Add additional parameter to ice_aq_start_lldp and ice_aq_stop_lldp. Also change the ethtool private flag from "disable-fw-lldp" to "enable-fw-lldp". This change will flip the boolean logic of the functionality of the flag (on = enable, off = disable). The change in name and functionality is to differentiate between the pre-persistence and post-persistence states. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Fix double spacingAnirudh Venkataramanan1-1/+1
Fix double spacing in ice_napi_disable_all Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23net: qualcomm: rmnet: Move common struct definitions to includeSubash Abhinov Kasiviswanathan2-24/+56
Create if_rmnet.h and move the rmnet MAP packet structs to this common include file. To account for portablity, add little and big endian bitfield definitions similar to the ip & tcp headers. The definitions in the headers can now be re-used by the upcoming ipa driver series as well as qmi_wwan. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23Revert "dpaa2-eth: configure the cache stashing amount on a queue"Ioana Radulescu1-6/+1
This reverts commit f8b995853444aba9c16c1ccdccdd397527fde96d. The reverted change instructed the QMan hardware block to fetch RX frame annotation and beginning of frame data to cache before the core would read them. It turns out that in rare cases, it's possible that a QMan stashing transaction is delayed long enough such that, by the time it gets executed, the frame in question had already been dequeued by the core and software processing began on it. If the core manages to unmap the frame buffer _before_ the stashing transaction is executed, an SMMU exception will be raised. Unfortunately there is no easy way to work around this while keeping the performance advantages brought by QMan stashing, so disable it altogether. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23cxgb4: use firmware API for validating filter specRaju Rangoju4-6/+68
Adds support for validating hardware filter spec configured in firmware before offloading exact match flows. Use the new fw api FW_PARAM_DEV_FILTER_MODE_MASK to read the filter mode and mask from firmware. If the api isn't supported, then fall-back to older way of reading just the mode from indirect register. Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23net: ll_temac: Enable multicast supportEsben Haabendal1-2/+1
Multicast support have been tested and is working now. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23net: ll_temac: Cleanup multicast filter on changeEsben Haabendal1-2/+5
Avoid leaving old address table entries when using multicast. If more than one multicast address were removed, only the first removed address would actually be cleared. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23net: ll_temac: Prepare indirect register access for multicast supportEsben Haabendal4-89/+179
With .ndo_set_rx_mode/temac_set_multicast_list() being called in atomic context (holding addr_list_lock), and temac_set_multicast_list() needing to access temac indirect registers, the mutex used to synchronize indirect register is a no-no. Replace it with a spinlock, and avoid sleeping in temac_indirect_busywait(). To avoid excessive holding of the lock, which is now a spinlock, the temac_device_reset() function is changed to only hold the lock for short periods. With timeouts, it could be holding the spinlock for more than 2 seconds. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23net: ll_temac: Do not make promiscuous mode sticky on multicastEsben Haabendal1-7/+0
When user has requested IFF_ALLMULTI or have set more than 4 multicast addresses, we should just use promiscuous mode, but not set it in flags, as it causes the interface to stay in promiscuous mode even when the non-IFF_PROMISC condition that caused promiscuous mode to be enabled has gone away. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23net: phy: lxt: Add suspend/resume support to LXT971 and LXT973.Christophe Leroy1-0/+6
All LXT PHYs implement the standard "power down" bit 11 of BMCR, so this patch adds support using the generic genphy_{suspend,resume} functions added by commit 0f0ca340e57b ("phy: power management support"). LXT970 is left aside because all registers get cleared upon "power down" exit. Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23devlink: add warning in case driver does not set port typeJiri Pirko2-0/+40
Prevent misbehavior of drivers who would not set port type for longer period of time. Drivers should always set port type. Do WARN if that happens. Note that it is perfectly fine to temporarily not have the type set, during initialization and port type change. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22hv_sock: perf: loop in send() to maximize bandwidthSunil Muthuswamy1-14/+31
Currently, the hv_sock send() iterates once over the buffer, puts data into the VMBUS channel and returns. It doesn't maximize on the case when there is a simultaneous reader draining data from the channel. In such a case, the send() can maximize the bandwidth (and consequently minimize the cpu cycles) by iterating until the channel is found to be full. Perf data: Total Data Transfer: 10GB/iteration Single threaded reader/writer, Linux hvsocket writer with Windows hvsocket reader Packet size: 64KB CPU sys time was captured using the 'time' command for the writer to send 10GB of data. 'Send Buffer Loop' is with the patch applied. The values below are over 10 iterations. |--------------------------------------------------------| | | Current | Send Buffer Loop | |--------------------------------------------------------| | | Throughput | CPU sys | Throughput | CPU sys | | | (MB/s) | time (s) | (MB/s) | time (s) | |--------------------------------------------------------| | Min | 407 | 7.048 | 401 | 5.958 | |--------------------------------------------------------| | Max | 455 | 7.563 | 542 | 6.993 | |--------------------------------------------------------| | Avg | 440 | 7.411 | 451 | 6.639 | |--------------------------------------------------------| | Median | 446 | 7.417 | 447 | 6.761 | |--------------------------------------------------------| Observation: 1. The avg throughput doesn't really change much with this change for this scenario. This is most probably because the bottleneck on throughput is somewhere else. 2. The average system (or kernel) cpu time goes down by 10%+ with this change, for the same amount of data transfer. Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22hv_sock: perf: Allow the socket buffer size options to influence the actual socket buffersSunil Muthuswamy1-10/+40
Currently, the hv_sock buffer size is static and can't scale to the bandwidth requirements of the application. This change allows the applications to influence the socket buffer sizes using the SO_SNDBUF and the SO_RCVBUF socket options. Few interesting points to note: 1. Since the VMBUS does not allow a resize operation of the ring size, the socket buffer size option should be set prior to establishing the connection for it to take effect. 2. Setting the socket option comes with the cost of that much memory being reserved/allocated by the kernel, for the lifetime of the connection. Perf data: Total Data Transfer: 1GB Single threaded reader/writer Results below are summarized over 10 iterations. Linux hvsocket writer + Windows hvsocket reader: |---------------------------------------------------------------------------------------------| |Packet size -> | 128B | 1KB | 4KB | 64KB | |---------------------------------------------------------------------------------------------| |SO_SNDBUF size | | Throughput in MB/s (min/max/avg/median): | | v | | |---------------------------------------------------------------------------------------------| | Default | 109/118/114/116 | 636/774/701/700 | 435/507/480/476 | 410/491/462/470 | | 16KB | 110/116/112/111 | 575/705/662/671 | 749/900/854/869 | 592/824/692/676 | | 32KB | 108/120/115/115 | 703/823/767/772 | 718/878/850/866 | 1593/2124/2000/2085 | | 64KB | 108/119/114/114 | 592/732/683/688 | 805/934/903/911 | 1784/1943/1862/1843 | |---------------------------------------------------------------------------------------------| Windows hvsocket writer + Linux hvsocket reader: |---------------------------------------------------------------------------------------------| |Packet size -> | 128B | 1KB | 4KB | 64KB | |---------------------------------------------------------------------------------------------| |SO_RCVBUF size | | Throughput in MB/s (min/max/avg/median): | | v | | |---------------------------------------------------------------------------------------------| | Default | 69/82/75/73 | 313/343/333/336 | 418/477/446/445 | 659/701/676/678 | | 16KB | 69/83/76/77 | 350/401/375/382 | 506/548/517/516 | 602/624/615/615 | | 32KB | 62/83/73/73 | 471/529/496/494 | 830/1046/935/939 | 944/1180/1070/1100 | | 64KB | 64/70/68/69 | 467/533/501/497 | 1260/1590/1430/1431 | 1605/1819/1670/1660 | |---------------------------------------------------------------------------------------------| Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22ipv4/igmp: shrink struct ip_sf_listEric Dumazet1-1/+1
Removing two 4 bytes holes allows to use kmalloc-32 kmem cache instead of kmalloc-64 on 64bit kernels. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22neighbor: Add tracepoint to __neigh_createDavid Ahern2-0/+51
Add tracepoint to __neigh_create to enable debugging of new entries. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22selftests: pmtu: Simplify cleanup and namespace namesDavid Ahern1-9/+8
The point of the pause-on-fail argument is to leave the setup as is after a test fails to allow a user to debug why it failed. Move the cleanup after posting the result to the user to make it so. Random names for the namespaces are not user friendly when trying to debug a failure. Make them simpler and more direct for the tests. Run cleanup at the beginning to ensure they are cleaned up if they already exist. Remove cleanup_done. There is no harm in doing cleanup twice; just ignore any errors related to not existing - which is already done. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22selftests: fib-onlink: Make quiet by defaultDavid Ahern1-5/+43
Add VERBOSE argument to fib-onlink-tests.sh and make output quiet by default. Add getopt parsing of inputs and support for -v (verbose) and -p (pause on fail). Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: Set strict_start_type for routes and rulesDavid Ahern3-0/+3
New userspace on an older kernel can send unknown and unsupported attributes resulting in an incompelete config which is almost always wrong for routing (few exceptions are passthrough settings like the protocol that installed the route). Set strict_start_type in the policies for IPv4 and IPv6 routes and rules to detect new, unsupported attributes and fail the route add. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22ipv4: Rename and export nh_update_mtuDavid Ahern2-2/+3
Rename nh_update_mtu to fib_nhc_update_mtu and export for use by the nexthop code. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22ipv4: export fib_info_update_nh_saddrDavid Ahern2-7/+7
Add scope as input argument versus relying on fib_info reference in fib_nh, and export fib_info_update_nh_saddr. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22ipv4: export fib_flushDavid Ahern2-1/+2
As nexthops are deleted, fib entries referencing it are marked dead. Export fib_flush so those entries can be removed in a timely manner. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22ipv4: export fib_check_nhDavid Ahern2-6/+8
Change fib_check_nh to take net, table and scope as input arguments over struct fib_config and export for use by nexthop code. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22ipv4: Add function to send route updatesDavid Ahern2-0/+74
Add fib_info_notify_update to walk the fib and send RTM_NEWROUTE notifications with NLM_F_REPLACE set for entries linked to a fib_info that have nh_updated flag set. This helper will be used by the nexthop code to notify userspace of routes that are impacted when a nexthop config is updated via replace. The new function and its helper are similar to how fib_flush and fib_table_flush work for address delete and link down events. This notification is needed for legacy apps that do not understand the new nexthop object. Apps that are nexthop aware can use the RTA_NH_ID attribute in the route notification to just ignore it. In the future this should be wrapped in a sysctl to allow OS'es that are fully updated to avoid the notificaton storm. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22ipv6: export function to send route updatesDavid Ahern5-4/+46
Add fib6_rt_update to send RTM_NEWROUTE with NLM_F_REPLACE set. This helper will be used by the nexthop code to notify userspace of routes that are impacted when a nexthop config is updated via replace. This notification is needed for legacy apps that do not understand the new nexthop object. Apps that are nexthop aware can use the RTA_NH_ID attribute in the route notification to just ignore it. In the future this should be wrapped in a sysctl to allow OS'es that are fully updated to avoid the notificaton storm. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22ipv6: Add hook to bump sernum for a route to stubsDavid Ahern4-0/+11
Add hook to ipv6 stub to bump the sernum up to the root node for a route. This is needed by the nexthop code when a nexthop config changes. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22ipv6: Add delete route hook to stubsDavid Ahern3-0/+8
Add ip6_del_rt to the IPv6 stub. The hook is needed by the nexthop code to remove entries linked to a nexthop that is getting deleted. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: phy: Make phy_basic_t1_features use base100t1.Andrew Lunn1-1/+1
Now that there is a link mode for 100BaseT1, use it in phy_basic_t1_features so T1 PHY drivers will indicate this mode via the Ethtool API. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: phy: Add support for 100BaseT1 and 1000BaseT1Andrew Lunn2-1/+5
Add link modes for 100Mbps and 1Gbps over a single pair. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: phy: dp83867: Allocate state struct in probeTrent Piepho1-14/+19
This was being done in config the first time the phy was configured. Should be in the probe method. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: phy: dp83867: Validate FIFO depth propertyTrent Piepho1-2/+15
Insure property is in valid range and fail when reading DT if it is not. Also add error message for existing failure if required property is not present. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: phy: dp83867: IO impedance is not dependent on RGMII delayTrent Piepho1-10/+9
The driver would only set the IO impedance value when RGMII internal delays were enabled. There is no reason for this. Move the IO impedance block out of the RGMII delay block. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: phy: dp83867: Use unsigned variables to store unsigned propertiesTrent Piepho1-3/+3
The variables used to store u32 DT properties were signed ints. This doesn't work properly if the value of the property were to overflow. Use unsigned variables so this doesn't happen. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: phy: dp83867: Rework delay rgmii delay handlingTrent Piepho1-12/+66
The code was assuming the reset default of the delay control register was to have delay disabled. This is what the datasheet shows as the register's initial value. However, that's not actually true: the default is controlled by the PHY's pin strapping. If the interface mode is selected as RX or TX delay only, insure the other direction's delay is disabled. If the interface mode is just "rgmii", with neither TX or RX internal delay, one might expect that the driver should disable both delays. But this is not what the driver does. It leaves the setting at the PHY's strapping's default. And that default, for no pins with strapping resistors, is to have delay enabled and 2.00 ns. Rather than change this behavior, I've kept it the same and documented it. No delay will most likely not work and will break ethernet on any board using "rgmii" mode. If the board is strapped to have a delay and is configured to use "rgmii" mode a warning is generated that "rgmii-id" should have been used. Also validate the delay values and fail if they are not in range. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.