aboutsummaryrefslogtreecommitdiffstats
path: root/include/drm/i915_drm.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-07-12drm/i915: Drop extern qualifiers from header function prototypesJanusz Krzysztofik1-5/+5
Follow dim checkpatch recommendation so it doesn't complain on that now and again on header file modifications. v2: drop testing leftover (Chris) Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-2-janusz.krzysztofik@linux.intel.com
2019-07-11drm/i915/tgl: Add additional ports for Tiger LakeVandita Kulkarni1-0/+3
There are 2 new additional typeC ports in Tiger Lake and PORT-C is now a combophy port. This results in 6 typeC ports and 3 combophy ports. These 6 TC ports can be DP alternate mode, DP over thunderbolt, native DP on legacy DP connector or native HDMI on legacy connector. v2: Rebase on new modular FIA code (Lucas) v3: Also add new port in port_identifier(), even though it can't possibly be used there (requested by José) v4: Add conversion port->tc_port in helper function after introction of phy namespace (Lucas) Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-13-lucas.demarchi@intel.com
2019-02-15drm/i915: enum port definition is moved into i915_drm.hRamalingam C1-0/+15
For the reusability of the enum port in other driver modules (like mei_hdcp), enum port definition is moved from I915 local header intel_display.h to drm/i915_drm.h Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: Fix subject prefix.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1550219730-17734-3-git-send-email-ramalingam.c@intel.com
2018-07-10x86/gpu: reserve ICL's graphics stolen memoryPaulo Zanoni1-1/+3
ICL changes the registers and addresses to 64 bits. I also briefly looked at implementing an u64 version of the PCI config read functions, but I concluded this wouldn't be trivial, so it's not worth doing it for a single user that can't have any racing problems while reading the register in two separate operations. v2: - Scrub the development (non-public) changelog (Joonas). - Remove the i915.ko bits so this can be easily backported in order to properly avoid stolen memory even on machines without i915.ko (Joonas). - CC stable for the reasons above. Issue: VIZ-9250 CC: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Fixes: 412310019a20 ("drm/i915/icl: Add initial Icelake definitions.") Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180504203252.28048-1-paulo.r.zanoni@intel.com
2017-12-12x86/early-quirks: export the stolen region as a resourceMatthew Auld1-0/+3
We duplicate the stolen discovery code in early-quirks and in i915, however if we just export the region as a resource from early-quirks we can nuke the duplication. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-3-matthew.auld@intel.com
2016-08-09drm: avoid "possible bad bitmask?" warningDave Gordon1-1/+1
Recent versions of gcc say this: include/drm/i915_drm.h:96:34: warning: result of ‘65535 << 20’ requires 37 bits to represent, but ‘int’ only has 32 bits [-Wshift-overflow=] Reported-by: David Binderman <linuxdev.baldrick@gmail.com> Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470764110-23855-1-git-send-email-david.s.gordon@intel.com
2016-04-25drm/i915: Canonicalize stolen memory calculationsJoonas Lahtinen1-0/+3
Move the better constructs/comments from i915_gem_stolen.c to early-quirks.c and increase readability in preparation of only having one set of functions. - intel_stolen_base -> gen3_stolen_base - use phys_addr_t instead of u32 for address for future proofing v2: - Print the invalid register values (Chris) (Omitting the register prefix as it's visible from backtrace.) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2014-02-09x86/gpu: Add Intel graphics stolen memory quirk for gen2 platformsVille Syrjälä1-0/+20
There isn't an explicit stolen memory base register on gen2. Some old comment in the i915 code suggests we should get it via max_low_pfn_mapped, but that's clearly a bad idea on my MGM. The e820 map in said machine looks like this: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000001f6effff] usable BIOS-e820: [mem 0x000000001f6f0000-0x000000001f6f7fff] ACPI data BIOS-e820: [mem 0x000000001f6f8000-0x000000001f6fffff] ACPI NVS BIOS-e820: [mem 0x000000001f700000-0x000000001fffffff] reserved BIOS-e820: [mem 0x00000000fec10000-0x00000000fec1ffff] reserved BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved That makes max_low_pfn_mapped = 1f6f0000, so assuming our stolen memory would start there would place it on top of some ACPI memory regions. So not a good idea as already stated. The 9MB region after the ACPI regions at 0x1f700000 however looks promising given that the macine reports the stolen memory size to be 8MB. Looking at the PGTBL_CTL register, the GTT entries are at offset 0x1fee00000, and given that the GTT entries occupy 128KB, it looks like the stolen memory could start at 0x1f700000 and the GTT entries would occupy the last 128KB of the stolen memory. After some more digging through chipset documentation, I've determined the BIOS first allocates space for something called TSEG (something to do with SMM) from the top of memory, and then it allocates the graphics stolen memory below that. Accordind to the chipset documentation TSEG has a fixed size of 1MB on 855. So that explains the top 1MB in the e820 region. And it also confirms that the GTT entries are in fact at the end of the the stolen memory region. Derive the stolen memory base address on gen2 the same as the BIOS does (TOM-TSEG_SIZE-stolen_size). There are a few differences between the registers on various gen2 chipsets, so a few different codepaths are required. 865G is again bit more special since it seems to support enough memory to hit 4GB address space issues. This means the PCI allocations will also affect the location of the stolen memory. Fortunately there appears to be the TOUD register which may give us the correct answer directly. But the chipset docs are a bit unclear, so I'm not 100% sure that the graphics stolen memory is always the last thing the BIOS steals. Someone would need to verify it on a real system. I tested this on the my 830 and 855 machines, and so far everything looks peachy. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1391628540-23072-3-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-08drm/i915/bdw: support GMS and GGMS changesBen Widawsky1-0/+4
All the BARs have the ability to grow. v2: Pulled out the simulator workaround to a separate patch. Rebased. v3: Rebase onto latest vlv patches from Jesse. v4: Rebased on top of the early stolen quirk patch from Jesse. v5: Use the new macro names. s/INTEL_BDW_PCI_IDS_D/INTEL_BDW_D_IDS s/INTEL_BDW_PCI_IDS_M/INTEL_BDW_M_IDS It's Jesse's fault for not following the convention I originally set. Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-03x86: add early quirk for reserving Intel graphics stolen memory v5Jesse Barnes1-0/+32
Systems with Intel graphics controllers set aside memory exclusively for gfx driver use. This memory is not always marked in the E820 as reserved or as RAM, and so is subject to overlap from E820 manipulation later in the boot process. On some systems, MMIO space is allocated on top, despite the efforts of the "RAM buffer" approach, which simply rounds memory boundaries up to 64M to try to catch space that may decode as RAM and so is not suitable for MMIO. v2: use read_pci_config for 32 bit reads instead of adding a new one (Chris) add gen6 stolen size function (Chris) v3: use a function pointer (Chris) drop gen2 bits (Daniel) v4: call e820_sanitize_map after adding the region v5: fixup comments (Peter) simplify loop (Chris) Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: H. Peter Anvin <hpa@zytor.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66726 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66844 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-03drm/i915: split PCI IDs out into i915_drm.h v4Jesse Barnes1-0/+2
For use by userspace (at some point in the future) and other kernel code. v2: move PCI IDs to uabi (Chris) move PCI IDs to drm/ (Dave) v3: fixup Quanta detection - needs to come first (Daniel) v4: fix up PCI match structure init for easier use by userspace (Chris) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-04UAPI: (Scripted) Disintegrate include/drmDavid Howells1-919/+1
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-10-03Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-1/+35
Pull drm merge (part 1) from Dave Airlie: "So first of all my tree and uapi stuff has a conflict mess, its my fault as the nouveau stuff didn't hit -next as were trying to rebase regressions out of it before we merged. Highlights: - SH mobile modesetting driver and associated helpers - some DRM core documentation - i915 modesetting rework, haswell hdmi, haswell and vlv fixes, write combined pte writing, ilk rc6 support, - nouveau: major driver rework into a hw core driver, makes features like SLI a lot saner to implement, - psb: add eDP/DP support for Cedarview - radeon: 2 layer page tables, async VM pte updates, better PLL selection for > 2 screens, better ACPI interactions The rest is general grab bag of fixes. So why part 1? well I have the exynos pull req which came in a bit late but was waiting for me to do something they shouldn't have and it looks fairly safe, and David Howells has some more header cleanups he'd like me to pull, that seem like a good idea, but I'd like to get this merge out of the way so -next dosen't get blocked." Tons of conflicts mostly due to silly include line changes, but mostly mindless. A few other small semantic conflicts too, noted from Dave's pre-merged branch. * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (447 commits) drm/nv98/crypt: fix fuc build with latest envyas drm/nouveau/devinit: fixup various issues with subdev ctor/init ordering drm/nv41/vm: fix and enable use of "real" pciegart drm/nv44/vm: fix and enable use of "real" pciegart drm/nv04/dmaobj: fixup vm target handling in preparation for nv4x pcie drm/nouveau: store supported dma mask in vmmgr drm/nvc0/ibus: initial implementation of subdev drm/nouveau/therm: add support for fan-control modes drm/nouveau/hwmon: rename pwm0* to pmw1* to follow hwmon's rules drm/nouveau/therm: calculate the pwm divisor on nv50+ drm/nouveau/fan: rewrite the fan tachometer driver to get more precision, faster drm/nouveau/therm: move thermal-related functions to the therm subdev drm/nouveau/bios: parse the pwm divisor from the perf table drm/nouveau/therm: use the EXTDEV table to detect i2c monitoring devices drm/nouveau/therm: rework thermal table parsing drm/nouveau/gpio: expose the PWM/TOGGLE parameter found in the gpio vbios table drm/nouveau: fix pm initialization order drm/nouveau/bios: check that fixed tvdac gpio data is valid before using it drm/nouveau: log channel debug/error messages from client object rather than drm client drm/nouveau: have drm debugging macros build on top of core macros ...
2012-10-02UAPI: (Scripted) Convert #include "..." to #include <path/...> in kernel system headersDavid Howells1-1/+1
Convert #include "..." to #include <path/...> in kernel system headers. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-09-26drm/i915: s/cacheing/caching/Ben Widawsky1-10/+10
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-20drm/i915: placeholder getparamBen Widawsky1-0/+1
There are internal patches for a feature which require a parameter to query whether support exists . These patches cannot be made external yet. In order to keep existing tests and userspace happy and free from conflicts, reserve a number for it. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17drm/i915: implement dma buf begin_cpu_access (v2)Dave Airlie1-0/+1
In order for udl vmap to work properly, we need to push the object into the CPU domain before we start copying the data to the USB device. This along with the udl change avoids userspace explicit mapping to be used. v2: add a flag for userspace to query to know if Intel kernel driver can deal with the vmap flushing properly. In theory udl would need a flag also, but I intend to push the patches very close to each other and other drivers should do the right thing from the start. I've added a test to my intel-gpu-tools prime branch, however testing this is a bit messy since the only way to get udl to vmap is to rendering something. I've tested this with real code as well to make sure it works. Signed-off-by: Dave Airlie <airlied@redhat.com> [danvet: resolved conflict, which required reallocating the PARAM number to 21.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-08drm/i915: Add I915_GEM_PARAM_HAS_SEMAPHORESChris Wilson1-0/+1
Userspace tries to estimate the cost of ring switching based on whether the GPU and GEM supports semaphores. (If we have multiple rings and no semaphores, userspace assumes that the cost of switching rings between batches is exorbitant and will endeavour to keep the next batch on the active ring - as a coarse approximation to tracking both destination and source surfaces.) Currently userspace has to guess whether semaphores exist based on the chipset generation and the module parameter, i915.semaphores. This is a crude and inaccurate guess as the defaults internally depend upon other chipset features being enabled or disabled, nor does it extend well into the future. By exporting a HAS_SEMAPHORES parameter, we can easily query the driver and obtain an accurate answer. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-26drm/i915: Export ability of changing cache levels to userspaceChris Wilson1-2/+8
By selecting the cache level (essentially whether or not the CPU snoops any updates to the bo, and on more recent machines whether it resides inside the CPU's last-level-cache) a userspace driver is able to then manage all of its memory within buffer objects, if it so desires. This enables the userspace driver to accelerate uploads and more importantly downloads from the GPU and to able to mix CPU and GPU rendering/activity efficiently. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Added code comment about where we plan to stuff platform specific cacheing control bits in the ioctl struct.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-25drm/i915: Return a mask of the active rings in the high word of busy_ioctlChris Wilson1-1/+5
The intention is to help select which engine to use for copies with interoperating clients - such as a GL client making a request to the X server to perform a SwapBuffers, which may require copying from the active GL back buffer to the X front buffer. We choose to report a mask of the active rings to future proof the interface against any changes which may allow for the object to reside upon multiple rings. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: bikeshed away the write ring mask and add the explanation Chris sent in a follow-up mail why we decided to use masks.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-25drm/i915: add register read IOCTLBen Widawsky1-1/+7
The interface's immediate purpose is to do synchronous timestamp queries as required by GL_TIMESTAMP. The GPU has a register for reading the timestamp but because that would normally require root access through libpciaccess, the IOCTL can provide this service instead. Currently the implementation whitelists only the render ring timestamp register, because that is the only thing we need to expose at this time. v2: make size implicit based on the register offset Add a generation check Reviewed-by: Eric Anholt <eric@anholt.net> Cc: Jacek Lawrynowicz <jacek.lawrynowicz@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: fixup the ioctl numerb:] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-25drm/i915: Reserve ioctl numbers for set/get_cachingDaniel Vetter1-0/+15
I'm planing to merge this next week for 3.7, but I'd like to avoid stupid conflicts with the exsting userspace when merging the new reg_read ioctl (which doesn't have userspace yet, but this caching interface has). Header extracted from Chris Wilson's patch, but fix up the copy&pasted comment in the interface struct. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-14drm/i915/context: switch contexts with execbuf2Ben Widawsky1-1/+7
Use the rsvd1 field in execbuf2 to specify the context ID associated with the workload. This will allow the driver to do the proper context switch when/if needed. v2: Add checks for context switches on rings not supporting contexts. Before the code would silently ignore such requests. Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-14drm/i915/context: create & destroy ioctlsBen Widawsky1-0/+15
Add the interfaces to allow user space to create and destroy contexts. Contexts are destroyed automatically if the file descriptor for the dri device is closed. Following convention as usual here causes checkpatch warnings. v2: with is_initialized, no longer need to init at create drop the context switch on create (daniel) v3: Use interruptible lock (Chris) return -ENODEV in !GEM case (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-06drm/i915: Add wait render timeout get paramBen Widawsky1-0/+1
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-06drm/i915: Inifite timeout for wait ioctlBen Widawsky1-1/+1
Change the ns_timeout parameter of the wait ioctl to a signed value. Doing this allows the kernel to provide an infinite wait when a timeout of less than 0 is provided. This mimics select/poll. Initially the parameter was meant to match up with the GL spec 1:1, but after being made aware of how much 2^64 - 1 nanoseconds actually is, I do not think anyone will ever notice the loss of 1 bit. The infinite timeout on waiting is similar to the existing i915 userspace interface with the exception that struct_mutex is dropped while doing the wait in this ioctl. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-25drm/i915: wait render timeout ioctlBen Widawsky1-0/+10
This helps implement GL_ARB_sync but stops short of allowing full blown sync objects. Finally we can use the new timed seqno waiting function to allow userspace to wait on a buffer object with a timeout. This implements that interface. The IOCTL will take as input a buffer object handle, and a timeout in nanoseconds (flags is currently optional but will likely be used for permutations of flush operations). Users may specify 0 nanoseconds to instantly check. The wait ioctl with a timeout of 0 reimplements the busy ioctl. With any non-zero timeout parameter the wait ioctl will wait for the given number of nanoseconds on an object becoming unbusy. Since the wait itself does so holding struct_mutex the object may become re-busied before this completes. A similar but shorter race condition exists in the busy ioctl. v2: ETIME/ERESTARTSYS instead of changing to EBUSY, and EGAIN (Chris) Flush the object from the gpu write domain (Chris + Daniel) Fix leaked refcount in good case (Chris) Naturally align ioctl struct (Chris) v3: Drop lock after getting seqno to avoid ugly dance (Chris) v4: check for 0 timeout after olr check to allow polling (Chris) v5: Updated the comment. (Chris) v6: Return -ETIME instead of -EBUSY when timeout_ns is 0 (Daniel) Fix the commit message comment to be less ugly (Ben) Add a warning to check the return timespec (Ben) v7: Use DRM_AUTH for the ioctl. (Eugeni) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-03-20drm/i915: add HAS_ALIASING_PPGTT parameter for userspaceDaniel Vetter1-1/+2
On Sanybridge a few MI read/write commands only work when ppgtt is enabled. Userspace therefore needs to be able to check whether ppgtt is enabled. For added hilarity, you need to reset the "use global GTT" bit on snb when ppgtt is enabled, otherwise it won't work. Despite what bspec says about automatically using ppgtt ... Luckily PIPE_CONTROL (the only write cmd current userspace uses) is not affected by all this, as tested by tests/gem_pipe_control_store_loop. Reviewed-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-17drm/i915: add a LLC feature flag in device descriptionEugeni Dodonov1-0/+1
LLC is not SNB/IVB-specific, so we should check for it in a more generic way. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-03drm/i915: Add support for resetting the SO write pointers on gen7.Eric Anholt1-0/+4
These registers are automatically incremented by the hardware during transform feedback to track where the next streamed vertex output should go. Unlike the previous generation, which had a packet for setting the corresponding registers to a defined value, gen7 only has MI_LOAD_REGISTER_IMM to do so. That's a secure packet (since it loads an arbitrary register), so we need to do it from the kernel, and it needs to be settable atomically with the batchbuffer execution so that two clients doing transform feedback don't stomp on each others' state. Instead of building a more complicated interface involcing setting the registers to a specific value, just set them to 0 when asked and userland can tweak its pointers accordingly. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-03drm/i915: add color key support v4Jesse Barnes1-0/+36
Add new ioctls for getting and setting the current destination color key. This allows for simple overlay display control by matching a color key value in the primary plane before blending the overlay on top. v2: remove unnecessary mutex acquire/release around reg accesses v3: add support for full color key management v4: fix copy & paste bug in snb_get_colorkey don't bother checking min/max values against docs as the docs are likely wrong (how could we handle 10bpc surface formats?) Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-07-22drm/i915: Fix typo in DRM_I915_OVERLAY_PUT_IMAGE ioctl defineOle Henrik Jahren1-1/+1
Because of a typo, calling ioctl with DRM_IOCTL_I915_OVERLAY_PUT_IMAGE is broken if the macro is used directly. When using libdrm the bug is not hit, since libdrm handles the ioctl encoding internally. The typo also leads to the .cmd and .cmd_drv fields of the drm_ioctl structure for DRM_I915_OVERLAY_PUT_IMAGE having inconsistent content. Signed-off-by: Ole Henrik Jahren <olehenja@alumni.ntnu.no> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@kernel.org Signed-off-by: Keith Packard <keithp@keithp.com>
2011-03-01drm/i915: Allow relocation deltas outside of target boChris Wilson1-0/+1
Userspace has a legitimate requirement to use a delta that points to outside of the target bo, and so we need to enable this. (As this is an abi break, albeit a relaxation of the current restrictions, mark the change with a new flag.) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-12-20drm/i915: Allow the application to choose the constant addressing modeChris Wilson1-0/+12
The relative-to-general state default is useless as it means having to rewrite the streaming kernels for each batch. Relative-to-surface is more useful, as that stream usually needs to be rewritten for each batch. And absolute addressing mode, vital if you start streaming state, is also only available by adjusting the register... Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-12-05drm/i915: announce to userspace that the bsd ring is coherentDaniel Vetter1-0/+2
Otherwise we can't really fix the abi-braindeadness of forcing libva to manually wait for rendering when switching rings. Which in turn makes implementing hw semaphores a pointless exercise (at least for ironlake). [Also added the relaxed fencing param to explain the jump in numbering - relaxed fencing is in -next.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-10-21drm/i915: Enable SandyBridge blitter ringChris Wilson1-1/+5
Based on an original patch by Zhenyu Wang, this initializes the BLT ring for SandyBridge and enables support for user execbuffers. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-08-23Merge branch 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds1-0/+1
* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (33 commits) drm/radeon/kms: fix typo in radeon_compute_pll_gain drm/radeon/kms: try to detect tv vs monitor for underscan drm/radeon/kms: fix sideport detection on newer rs880 boards drm/radeon: fix passing wrong type to gem object create. drm/radeon/kms: set encoder type to DVI for HDMI on evergreen drm/radeon/kms: add back missing break in info ioctl drm/radeon/kms: don't enable MSIs on AGP boards drm/radeon/kms: fix agp mode setup on cards that use pcie bridges drm: move dereference below check drm: fix end of loop test drm/radeon/kms: rework radeon_dp_detect() logic drm/radeon/kms: add missing asic callback assignment for evergreen drm/radeon/kms/DCE3+: switch pads to ddc mode when going i2c drm/radeon/kms/pm: bail early if nothing's changing drm/radeon/kms/atom: clean up dig atom handling drm/radeon/kms: DCE3/4 transmitter fixes drm/radeon/kms: rework encoder handling drm/radeon/kms: DCE3/4 AdjustPixelPll updates drm/radeon: Fix stack data leak drm/radeon/kms: fix GTT/VRAM overlapping test ...
2010-08-17drm: block userspace under allocating buffer and having drivers overwrite it (v2)Dave Airlie1-0/+1
With the current screwed but its ABI, ioctls for the drm, Linus pointed out that we could allow userspace to specify the allocation size, but we pass it to the driver which then uses it blindly to store a struct. Now if userspace specifies the allocation size as smaller than the driver needs, the driver can possibly overwrite memory. This patch restructures the driver ioctls so we store the structure size we are expecting, and make sure we allocate at least that size. The copy from/to userspace are still restricted to the size the user specifies, this allows ioctl structs to grow on both sides of the equation. Up until now we didn't really use the DRM_IOCTL defines in the kernel, so this cleans them up and adds them for nouveau. v2: fix nouveau pushbuf arg (thanks to Ben for pointing it out) Reported-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-03x86 platform driver: intelligent power sharing driverJesse Barnes1-0/+9
Intel Core i3/5 platforms with integrated graphics support both CPU and GPU turbo mode. CPU turbo mode is opportunistic: the CPU will use any available power to increase core frequencies if thermal headroom is available. The GPU side is more manual however; the graphics driver must monitor GPU power and temperature and coordinate with a core thermal driver to take advantage of available thermal and power headroom in the package. The intelligent power sharing (IPS) driver is intended to coordinate this activity by monitoring MCP (multi-chip package) temperature and power, allowing the CPU and/or GPU to increase their power consumption, and thus performance, when possible. The goal is to maximize performance within a given platform's TDP (thermal design point). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-06-01drm/i915: add HAS_BSD check to i915_getparamZou Nan hai1-0/+1
This will let userland only try to use the new media decode functionality when the appropriate kernel is present. Signed-off-by: Zou Nan hai <nanhai.zou@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26drm/i915: introduce intel_ring_buffer structure (V2)Zou Nan hai1-1/+3
Introduces a more complete intel_ring_buffer structure with callbacks for setup and management of a particular ringbuffer, and converts the render ring buffer consumers to use it. Signed-off-by: Zou Nan hai <nanhai.zou@intel.com> Signed-off-by: Xiang Hai hao <haihao.xiang@intel.com> [anholt: Fixed up whitespace fail and rebased against prep patches] Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-06drm/i915: execbuf2 supportJesse Barnes1-0/+54
This patch adds a new execbuf ioctl, execbuf2, for use by clients that want to control fence register allocation more finely. The buffer passed in to the new ioctl includes a new relocation type to indicate whether a given object needs a fence register assigned for the command buffer in question. Compatibility with the existing execbuf ioctl is implemented in terms of the new code, preserving the assumption that fence registers are required for pre-965 rendering commands. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [ickle: Remove pre-emptive clear_fence_reg()] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Kristian Høgsberg <krh@bitplanet.net> [anholt: Removed dmesg spam] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-08Merge remote branch 'anholt/drm-intel-next' into drm-linusDave Airlie1-1/+73
This merges the upstream Intel tree and fixes up numerous conflicts due to patches merged into Linus tree later in -rc cycle. Conflicts: drivers/char/agp/intel-agp.c drivers/gpu/drm/drm_dp_i2c_helper.c drivers/gpu/drm/i915/i915_irq.c drivers/gpu/drm/i915/i915_suspend.c
2009-12-04drm: Add compatibility #ifdefs for *BSDKristian Høgsberg1-2/+2
This let's use use the linux drm headers as the canonical source for libdrm on all platforms. Signed-off-by: Kristian Høgsberg <krh@bitplanet.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-01drm/i915: Fix typo in ioctl struct name.Kristian Høgsberg1-1/+1
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01drm/i915: add GETPARAM request for page flippingJesse Barnes1-0/+1
Add a GETPARAM request for checking if page flipping is supported. Useful for the 2D driver to enable the flipping path. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-05drm/i915: implement drmmode overlay support v4Daniel Vetter1-0/+71
This implements intel overlay support for kms via a device-specific ioctl. Thomas Hellstrom brought up the idea of a general ioctl (on dri-devel). We've reached the conclusion that such an infrastructure only makes sense when multiple kms overlay implementations exists, which atm don't (and it doesn't look like this is gonna change). Open issues: - Runs in sync with the gpu, i.e. unnecessary waiting. I've decided to wait on this because the hw tends to hang when changing something in this area. I left some dummy functions as infrastructure. - polyphase filtering uses a static table. - uses uninterruptible sleeps. Unfortunately the alternatives may unnecessarily wedged the hw if/when we timeout too early (and userspace only overloaded the batch buffers with stuff worth a few secs of gpu time). Changes since v1: - fix off-by-one misconception on my side. This fixes fullscreen playback. Changes since v2: - add underrun detection as spec'ed for i965. - flush caches properly, fixing visual corruptions. Changes since v4: - fix up cache flushing of overlay memory regs. - killed require_pipe_a logic - it hangs the chip. Tested-By: diego.abelenda@gmail.com (on a 865G) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [anholt: Resolved against the MADVISE ioctl going in before this one] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-23drm/i915: Track purged state.Chris Wilson1-0/+1
In order to correctly prevent the invalid reuse of a purged buffer, we need to track such events and warn the user before something bad happens. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2009-09-17drm/i915: Add ioctl to set 'purgeability' of objectsChris Wilson1-0/+18
Similar to the madvise() concept, the application may wish to mark some data as volatile. That is in the event of memory pressure the kernel is free to discard such buffers safe in the knowledge that the application can recreate them on demand, and is simply using these as a cache. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-05-14drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl.Carl Worth1-0/+10
This allows userlevel code to discover the pipe number corresponding to a given CRTC ID. This is necessary for doing pipe-specific operations such as waiting for vblank on a given CRTC. Failure to use the right pipe mapping can result in GPU hangs, or at least failure to actually sync to vblank. Signed-off-by: Carl Worth <cworth@cworth.org> [anholt: Style touchups from review] Signed-off-by: Eric Anholt <eric@anholt.net>