aboutsummaryrefslogtreecommitdiffstats
path: root/include/drm (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-05-27Merge tag 'drm-intel-next-fixes-2016-05-25' of git://anongit.freedesktop.org/drm-intel into drm-nextDave Airlie1-0/+92
I see the main drm pull got merged, here's the first batch of fixes for 4.7 already. Fixes all around, a large portion cc: stable stuff. [airlied: the DP++ stuff is a regression fix]. * tag 'drm-intel-next-fixes-2016-05-25' of git://anongit.freedesktop.org/drm-intel: drm/i915: Stop automatically retiring requests after a GPU hang drm/i915: Unify intel_ring_begin() drm/i915: Ignore stale wm register values on resume on ilk-bdw (v2) drm/i915/psr: Try to program link training times correctly drm/i915/bxt: Adjusting the error in horizontal timings retrieval drm/i915: Don't leave old junk in ilk active watermarks on readout drm/i915: s/DPPL/DPLL/ for SKL DPLLs drm/i915: Fix gen8 semaphores id for legacy mode drm/i915: Set crtc_state->lane_count for HDMI drm/i915/BXT: Retrieving the horizontal timing for DSI drm/i915: Protect gen7 irq_seqno_barrier with uncore lock drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT drm/i915: Enable/disable TMDS output buffers in DP++ adaptor as needed drm/i915: Respect DP++ adaptor TMDS clock limit drm: Add helper for DP++ adaptors
2016-05-23drm: Add helper for DP++ adaptorsVille Syrjälä1-0/+92
Add a helper which aids in the identification of DP dual mode (aka. DP++) adaptors. There are several types of adaptors specified: type 1 DVI, type 1 HDMI, type 2 DVI, type 2 HDMI Type 1 adaptors have a max TMDS clock limit of 165MHz, type 2 adaptors may go as high as 300MHz and they provide a register informing the source device what the actual limit is. Supposedly also type 1 adaptors may optionally implement this register. This TMDS clock limit is the main reason why we need to identify these adaptors. Type 1 adaptors provide access to their internal registers and the sink DDC bus through I2C. Type 2 adaptors provide this access both via I2C and I2C-over-AUX. A type 2 source device may choose to implement either of these methods. If a source device implements the I2C-over-AUX method, then the driver will obviously need specific support for such adaptors since the port is driven like an HDMI port, but DDC communication happes over the AUX channel. This helper should be enough to identify the adaptor type (some type 1 DVI adaptors may be a slight exception) and the maximum TMDS clock limit. Another feature that may be available is control over the TMDS output buffers on the adaptor, possibly allowing for some power saving when the TMDS link is down. Other user controllable features that may be available in the adaptors are downstream i2c bus speed control when using i2c-over-aux, and some control over the CEC pin. I chose not to provide any helper functions for those since I have no use for them in i915 at this time. The rest of the registers in the adaptor are mostly just information, eg. IEEE OUI, hardware and firmware revision, etc. v2: Pass adaptor type to helper functions to ease driver implementation Fix a bunch of typoes (Paulo) Add DRM_DP_DUAL_MODE_UNKNOWN for the case where we don't (yet) know the type (Paulo) Reject 0x00 and 0xff DP_DUAL_MODE_MAX_TMDS_CLOCK values (Paulo) Adjust drm_dp_dual_mode_detect() type2 vs. type1 detection to ease future LSPCON enabling Remove the unused DP_DUAL_MODE_LAST_RESERVED define v3: Fix kernel doc function argument descriptions (Jani) s/NONE/UNKNOWN/ in drm_dp_dual_mode_detect() docs Add kernel doc for enum drm_dp_dual_mode_type Actually build the docs Fix more typoes v4: Adjust code indentation of type2 adaptor detection (Shashank) Add debug messages for failurs cases (Shashank) v5: EXPORT_SYMBOL(drm_dp_dual_mode_read) (Paulo) Cc: stable@vger.kernel.org Cc: Tore Anderson <tore@fud.no> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> (v4) Link: http://patchwork.freedesktop.org/patch/msgid/1462542412-25533-1-git-send-email-ville.syrjala@linux.intel.com (cherry picked from commit ede53344dbfd1dd43bfd73eb6af743d37c56a7c3) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-23drm/edid: add displayid detailed 1 timings to the modelist. (v1.1)Dave Airlie1-0/+17
The tiled 5K Dell monitor appears to be hiding it's tiled mode inside the displayid timings block, this patch parses this blocks and adds the modes to the modelist. v1.1: add missing __packed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95207 Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-21drm: Nuke ->vblank_disable_allowedDaniel Vetter1-8/+0
This was added in commit 0a3e67a4caac273a3bfc4ced3da364830b1ab241 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Tue Sep 30 12:14:26 2008 -0700 drm: Rework vblank-wait handling to allow interrupt reduction. to stay backwards-compatible with old UMS code that didn't even tell the kernel when it did a modeset, so that the kernel could save/restore vblank counters. At worst this means vblanks will be somewhat funky on a setup that very likely no one still runs. So let's just nuke it. Plan B would be to set it unconditionally in drm_vblank_init for kms drivers, instead of in each driver separately. So if this patch breaks anything please only restore the hunks in drmP.h and drm_irq.c, plus add a check for DRIVER_MODESET in drm_vblank_init. Stumbled over this in a discussion on irc with Chris. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-17drm/fb-cma-helper: Add function drm_fb_cma_create_with_funcs()Noralf Trønnes1-0/+3
Add drm_fb_cma_create_with_funcs() for drivers that need to set the dirty() callback. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1463077523-23959-3-git-send-email-noralf@tronnes.org
2016-05-17drm/fb-cma-helper: Use const for drm_framebuffer_funcs argumentNoralf Trønnes1-1/+1
drm_framebuffer_init() uses const for the drm_framebuffer_funcs argument so use that on drm_fb_cma_alloc() and drm_fbdev_cma_create_with_funcs() as well. Cc: laurent.pinchart@ideasonboard.com Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1463077523-23959-2-git-send-email-noralf@tronnes.org
2016-05-17drm: Drop connector argument from __drm_atomic_helper_connector_destroy_stateDaniel Vetter1-2/+1
It's unused, and really this helper should only look at the state structure and nothing else. Note that this conflicts with a patch from Dave that adds refcounting to drm_connectors. It's not yet clear whether the check Dave adds for connector != NULL is really needed or the right check. v2: Fix commmit message (Laurent). Cc: Dave Airlie <airlied@gmail.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462804451-15318-3-git-send-email-daniel.vetter@ffwll.ch
2016-05-17drm: Drop plane argument from __drm_atomic_helper_plane_destroy_stateDaniel Vetter1-2/+1
It's unused, and really this helper should only look at the state structure and nothing else. v2: Fix commit message (Laurent). v3: Rebase onto mtk driver merge. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Mark Yao <mark.yao@rock-chips.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462804451-15318-2-git-send-email-daniel.vetter@ffwll.ch
2016-05-17drm: Drop crtc argument from __drm_atomic_helper_crtc_destroy_stateDaniel Vetter1-2/+1
It's unused, and really this helper should only look at the state structure and nothing else. v2: Rebase on top of rockchip changes v3: Drop unrelated hunk, spotted by Laurent. v4: Rebase onto mtk driver merge. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Mark Yao <mark.yao@rock-chips.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462804451-15318-1-git-send-email-daniel.vetter@ffwll.ch
2016-05-17drm: Remove unused drm_device from drm_gem_object_lookup()Chris Wilson1-3/+1
drm_gem_object_lookup() has never required the drm_device for its file local translation of the user handle to the GEM object. Let's remove the unused parameter and save some space. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: Fixup kerneldoc too.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-05-17Merge tag 'topic/drm-misc-2016-05-13' of git://anongit.freedesktop.org/drm-intel into drm-nextDave Airlie1-0/+2
I kinda hoped that I could still sneak in Noralf's drm_simple_display_pipe, since there's intereset by others now (for tilcdc at least). But it wasn't ready by a hair. Oh well. Otherwise random stuff plus prep patches from Noralf. * tag 'topic/drm-misc-2016-05-13' of git://anongit.freedesktop.org/drm-intel: drm/atomic: Add drm_atomic_helper_best_encoder() drm/atomic: Don't skip drm_bridge_*() calls if !drm_encoder_helper_funcs drm/fb-cma-helper: Hook up to DocBook and fix some docs drm/fb-helper: Remove mention of CONFIG_FB_DEFERRED_IO in docs drm/sti: include linux/seq_file.h where needed drm/tegra: Use lockless gem BO free callback drm/exynos: Use lockless gem BO free callback drm: Make drm_encoder_helper_funcs optional
2016-05-12drm/dp: Add define to set 0.5% down-spread in MAX_DOWNSPREAD registerEnric Balletbo i Serra1-0/+1
Support of 0.5% down-spread is required for DisplayPort Specification Version 1.1 Sink. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [treding@nvidia.com: rename to DP_MAX_DOWNSPREAD_0_5] Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-05-11drm/atomic: Add drm_atomic_helper_best_encoder()Noralf Trønnes1-0/+2
Add (struct drm_connector_helper_funcs *)->best_encoder callback helper for connectors that support exactly 1 encoder, statically determined at driver init time. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462982962-10530-6-git-send-email-noralf@tronnes.org
2016-05-09Merge tag 'v4.6-rc7' into drm-nextDave Airlie1-0/+2
Merge this back as we've built up a fair few conflicts, and I have some newer trees to pull in.
2016-05-09Merge tag 'topic/drm-misc-2016-05-08' of git://anongit.freedesktop.org/drm-intel into drm-nextDave Airlie2-1/+60
Refcounting is hard, so here's a quick pull request with the one-liner to fix up i915. Otherwise just a few other small things I picked up. Plus the regression fix from Marten for rmfb behaviour that lingered around forever since no testers. Feel free to cherry-pick that over to drm-fixes, but given that there's not many who seemed to have cared, meh. * tag 'topic/drm-misc-2016-05-08' of git://anongit.freedesktop.org/drm-intel: drm/i915: Correctly refcount connectors in hw state readou drm/panel: Flesh out kerneldoc drm: Add gpu.tmpl docbook to MAINTAINERS entry drm/core: Do not preserve framebuffer on rmfb, v4. drm: Fix up markup fumble drm/fb_helper: Fix a few typos
2016-05-06drm/panel: Flesh out kerneldocThierry Reding1-0/+59
Write more complete kerneldoc comments for the DRM panel API and integrate the helpers in the DRM DocBook reference. Signed-off-by: Thierry Reding <treding@nvidia.com>drm/panel: Add helper for simple panel connector Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160506140137.GA4641@ulmo.ba.sec
2016-05-06Merge branch 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu into drm-nextDave Airlie1-0/+9
fsl-dcu pixel clock polarity support * 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu: drm/fsl-dcu: use bus_flags for pixel clock polarity drm: introduce bus_flags in drm_display_info
2016-05-06Merge branch 'drm-next-4.7' of git://people.freedesktop.org/~agd5f/linux into drm-nextDave Airlie2-12/+21
This is the first big radeon/amdgpu pull request for 4.7. Highlights: - Polaris support in amdgpu Current display stack on par with other asics, for advanced features DAL is required Power management support Support for GFX, Compute, SDMA, UVD, VCE - VCE and UVD init/fini cleanup in radeon - GPUVM improvements - Scheduler improvements - Clockgating improvements - Powerplay improvements - TTM changes to support driver specific LRU update mechanism - Radeon support for new Mesa features - ASYNC pageflip support for radeon - Lots of bug fixes and code cleanups * 'drm-next-4.7' of git://people.freedesktop.org/~agd5f/linux: (180 commits) drm/amdgpu: Replace rcu_assign_pointer() with RCU_INIT_POINTER() drm/amdgpu: use drm_mode_vrefresh() rather than mode->vrefresh drm/amdgpu/uvd6: add bypass support for fiji (v3) drm/amdgpu/fiji: set UVD CG state when enabling UVD DPM (v2) drm/powerplay: add missing clockgating callback for tonga drm/amdgpu: Constify some tables drm/amd/powerplay: Delete dead struct declaration drm/amd/powerplay/hwmgr: don't add invalid voltage drm/amd/powerplay/hwmgr: prevent VDDC from exceeding 2V MAINTAINERS: Remove unneded wildcard for the Radeon/AMDGPU drivers drm/radeon: add cayman VM support for append packet. drm/amd/amdgpu: Add debugfs entries for smc/didt/pcie drm/amd/amdgpu: Drop print_status callbacks. drm/amd/powerplay: revise reading/writing pptable on Polaris10 drm/amd/powerplay: revise reading/writing pptable on Tonga drm/amd/powerplay: revise reading/writing pptable on Fiji drm/amd/powerplay: revise caching the soft pptable and add it's size drm/amd/powerplay: add dpm force multiple levels on cz/tonga/fiji/polaris (v2) drm/amd/powerplay: fix fan speed percent setting error on Polaris10 drm/amd/powerplay: fix bug dpm can't work when resume back on Polaris ...
2016-05-05drm: introduce bus_flags in drm_display_infoStefan Agner1-0/+9
Introduce bus_flags to specify display bus properties like signal polarities. This is useful for parallel display buses, e.g. to specify the pixel clock or data enable polarity. Suggested-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Manfred Schlaegl <manfred.schlaegl@gmx.at> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-05-05drm: Fix up markup fumbleDaniel Vetter1-1/+1
It's & for struct references, not #. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462369327-26659-1-git-send-email-daniel.vetter@ffwll.ch
2016-05-05drm/modes: add connector reference counting. (v2)Dave Airlie1-1/+31
This uses the previous changes to add reference counts to drm connector objects. v2: move fbdev changes to their own patch. add some kerneldoc Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-05drm/fb: fix missing /** in kerneldoc comment.Dave Airlie1-1/+1
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-04drm/ttm: implement LRU add callbacks v2Christian König1-0/+9
This allows fine grained control for the driver where to add a BO into the LRU. v2: fix typo in comment Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/ttm: add optional LRU removal callback v2Christian König1-0/+6
Useful for driver specific LRU handling. v2: fix typo in comment Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/ttm: remove unused validation sequenceChristian König1-2/+0
Not used any more. Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/ttm: remove lazy parameter from ttm_bo_waitChristian König1-1/+1
Not used any more. Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/ttm: remove use_ticket parameter from ttm_bo_reserveChristian König1-9/+5
Not used any more. Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-05Merge tag 'topic/drm-misc-2016-05-04' of git://anongit.freedesktop.org/drm-intel into drm-nextDave Airlie7-42/+62
Ofc I promise just a few leftovers for drm-misc and somehow it's the biggest pull. But really mostly trivial stuff: - MAINTAINERS updates from Emil - rename async to nonblock in atomic_commit to avoid the confusion between nonblocking ioctl and async flip (= not vblank synced), from Maarten. Needs to be regened with newer drivers, but probably only after -rc1 to catch them all. - actually lockless gem_object_free, plus acked driver conversion patches. All the trickier prep stuff already is in drm-next. - Noralf's nice work for generic defio support in our fbdev emulation. Keeps the udl hack, and qxl is tested by Gerd. * tag 'topic/drm-misc-2016-05-04' of git://anongit.freedesktop.org/drm-intel: (47 commits) drm: Fixup locking WARN_ON mistake around gem_object_free_unlocked drm/etnaviv: Use lockless gem BO free callback drm/imx: Use lockless gem BO free callback drm/radeon: Use lockless gem BO free callback drm/amdgpu: Use lockless gem BO free callback drm/gem: support BO freeing without dev->struct_mutex MAINTAINERS: Add myself for the new VC4 (RPi GPU) graphics driver. MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers MAINTAINERS: Add a few DRM drivers by Dave Airlie MAINTAINERS: List the correct git repo for the Renesas DRM drivers MAINTAINERS: Update the files list for the Renesas DRM drivers MAINTAINERS: Update the files list for the Armada DRM driver MAINTAINERS: Update the files list for the Rockchip DRM driver MAINTAINERS: Update the files list for the Exynos DRM driver MAINTAINERS: Add maintainer entry for the VMWGFX DRM driver MAINTAINERS: Add maintainer entry for the MSM DRM driver MAINTAINERS: Add maintainer entry for the Nouveau DRM driver MAINTAINERS: Update the files list for the Etnaviv DRM driver MAINTAINERS: Remove unneded wildcard for the i915 DRM driver drm/atomic: Add WARN_ON when state->acquire_ctx is not set. ...
2016-05-04drm/gem: support BO freeing without dev->struct_mutexDaniel Vetter2-36/+27
Finally all the core gem and a lot of drivers are entirely free of dev->struct_mutex depencies, and we can start to have an entirely lockless unref path. To make sure that no one who touches the core code accidentally breaks existing drivers which still require dev->struct_mutex I've made the might_lock check unconditional. While at it de-inline the ref/unref functions, they've become a bit too big. v2: Make it not leak like a sieve. v3: Review from Lucas: - drop != NULL in pointer checks. - fixup copypasted kerneldoc to actually match the functions. v4: Add __drm_gem_object_unreference as a fastpath helper for drivers who abolished dev->struct_mutex, requested by Chris. v5: Fix silly mistake in drm_gem_object_unreference_unlocked caught by intel-gfx CI - I checked for gem_free_object instead of gem_free_object_unlocked ... Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> (v3) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4) Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462178451-1765-1-git-send-email-daniel.vetter@ffwll.ch
2016-05-04Merge tag 'topic/drm-misc-2016-04-29' of git://anongit.freedesktop.org/drm-intel into drm-nextDave Airlie3-3/+6
- prep work for struct_mutex-less gem_free_object - more invasive/tricky mst fixes from Lyude for broken hw. I discussed this with Ville/Jani and we all agreed more soaking in -next would be real good this late in the -rc cycle. They're cc: stable too to make sure they're not getting lost. Feel free to cherry-pick those four if you disagree. - few small things all over * tag 'topic/drm-misc-2016-04-29' of git://anongit.freedesktop.org/drm-intel: drm/atomic: Add missing drm_crtc_internal.h include drm/dp: Allow signals to interrupt drm_aux-dev reads/writes drm: Quiet down drm_mode_getresources drm: Quiet down drm_mode_getconnector drm: Protect dev->filelist with its own mutex drm: Make drm_vm_open/close_locked private to drm_vm.c drm: Hide master MAP cleanup in drm_bufs.c drm: Forbid legacy MAP functions for DRIVER_MODESET drm: Push struct_mutex into ->master_destroy drm: Move drm_getmap into drm_bufs.c and give it a legacy prefix drm: Put legacy lastclose work into drm_legacy_dev_reinit drm: Give drm_agp_clear drm_legacy_ prefix drm/sysfs: Annote lockless show functions with READ_ONCE MAINTAINERS: Update the files list for the GMA500 DRM driver drm: rcar-du: Fix compilation warning drm/i915: Get rid of intel_dp_dpcd_read_wake() drm/dp_helper: Perform throw-away read before actual read in drm_dp_dpcd_read() drm/dp_helper: Retry aux transactions on all errors drm/dp_helper: Always wait before retrying native aux transactions
2016-05-02drm/atomic: Rename drm_atomic_async_commit to nonblocking.Maarten Lankhorst1-1/+1
Another step in renaming async to nonblocking for atomic commit. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-3-git-send-email-maarten.lankhorst@linux.intel.com
2016-05-02drm/atomic: Rename async parameter to nonblocking.Maarten Lankhorst2-5/+5
This is the first step of renaming async commit to nonblocking commit. The flag passed by userspace is NONBLOCKING, and async has a different meaning for page flips, where it means as soon as possible. Fixing up comments in drm core is done manually, to make sure I didn't miss anything. For drivers, the following cocci script is used to rename bool async to bool nonblock: @@ identifier I =~ "^async"; identifier func; @@ func(..., bool - I + nonblock , ...) { <... - I + nonblock ...> } @@ identifier func; type T; identifier I =~ "^async"; @@ T func(..., bool - I + nonblock , ...); Thanks to Tvrtko Ursulin for the cocci script. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-2-git-send-email-maarten.lankhorst@linux.intel.com
2016-05-02drm/fb-cma-helper: Add fb_deferred_io supportNoralf Trønnes1-0/+14
This adds fbdev deferred io support if CONFIG_FB_DEFERRED_IO is enabled. The driver has to provide a (struct drm_framebuffer_funcs *)->dirty() callback to get notification of fbdev framebuffer changes. If the dirty() hook is set, then fb_deferred_io is set up automatically by the helper. Two functions have been added so that the driver can provide a dirty() function: - drm_fbdev_cma_init_with_funcs() This makes it possible for the driver to provided a custom (struct drm_fb_helper_funcs *)->fb_probe() function. - drm_fbdev_cma_create_with_funcs() This is used by the .fb_probe hook to set a driver provided (struct drm_framebuffer_funcs *)->dirty() function. Cc: laurent.pinchart@ideasonboard.com Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-6-git-send-email-noralf@tronnes.org
2016-05-02drm/fb-helper: Add fb_deferred_io supportNoralf Trønnes1-0/+15
This adds deferred io support to drm_fb_helper. The fbdev framebuffer changes are flushed using the callback (struct drm_framebuffer *)->funcs->dirty() by a dedicated worker ensuring that it always runs in process context. For those wondering why we need to be able to handle atomic calling contexts: Both panic paths and cursor code and fbcon blanking can run from atomic. See commit bcb39af4486be07e896fc374a2336bad3104ae0a Author: Dave Airlie <airlied@redhat.com> Date: Thu Feb 7 11:19:15 2013 +1000 drm/udl: make usage as a console safer for where this was originally discovered. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: Augment commit message with why we need to handle atomic contexts.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-4-git-send-email-noralf@tronnes.org
2016-04-28drm: fb: Add seq_file definitionMaxime Ripard1-0/+2
Otherwise, building with DEBUG_FS enabled will trigger a build warning because we're using a structure that has not been declared. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-04-27drm: Protect dev->filelist with its own mutexDaniel Vetter1-0/+1
amdgpu gained dev->struct_mutex usage, and that's because it's walking the dev->filelist list. Protect that list with it's own lock to take one more step towards getting rid of struct_mutex usage in drivers once and for all. While doing the conversion I noticed that 2 debugfs files in i915 completely lacked appropriate locking. Fix that up too. v2: don't forget to switch to drm_gem_object_unreference_unlocked. Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-9-git-send-email-daniel.vetter@ffwll.ch
2016-04-27drm: Hide master MAP cleanup in drm_bufs.cDaniel Vetter1-1/+3
And again make sure it's a no-op for modern drivers. Another case of dev->struct_mutex gone for modern drivers! Note that the entirety of the legacy addmap interface is now protected by DRIVER_MODESET. Note that just auditing kernel code is not enough, since userspace loves to set up legacy maps on it's own for various things - with ums userspace and kernel space share control over resources. v2: Also add a DRIVER_* check like for all other maps functions to really short-circuit the code. And give drm_legacy_rmmap used by the dev unregister code the same treatment. v3: - remove redundant return; (Alex, Chris) - don't special case nouveau with DRIVER_KMS_LEGACY_CONTEXT. v4: Again special case nouveau. The problem is not directly in the ddx, but that it calls dri1 functions from the X server. And those do call drmAddMap. Fixed only in commit b1a630b48210d6a3c44994fce1b73273000ace5c Author: Dave Airlie <airlied@redhat.com> Date: Wed Nov 7 14:45:14 2012 +1000 nouveau: drop DRI1 device open interface. Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461741618-12679-1-git-send-email-daniel.vetter@ffwll.ch
2016-04-27drm: Give drm_agp_clear drm_legacy_ prefixDaniel Vetter1-2/+2
It has a DRIVER_MODESET check to sure make it's not creating havoc for drm drivers. Make that clear in the name too. v2: Move misplaced hunk, spotted by 0day and Thierry. Cc: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-2-git-send-email-daniel.vetter@ffwll.ch
2016-04-27drm: Switch blobs to the new generic modeset obj refcountingDaniel Vetter1-1/+0
Need to move the free function around a bit, but otherwise mostly just removing code. Specifically we can nuke all the _locked variants since the weak idr reference is now protected by the idr_mutex, which we never hold anywhere expect in the lookup/reg/unreg functions. And those never call anything else. Another benefit of this is that this patch switches the weak reference logic from kref_put_mutex to kref_get_unless_zero. And the later is in general more flexible wrt accomodating multiple weak references protected by different locks, which might or might not come handy eventually. But one consequence of that switch is that we need to acquire the blob_lock from the free function for the list_del calls. That's a bit tricky to pull off, but works well if we pick the exact same scheme as is already used for framebuffers. Most important changes: - filp list is maintainer by create/destroy_blob ioctls directly (already the case, so we can just remove the redundant list_del from the free function). - filp close handler walks the filp-private list lockless - works because we know no one else can access it. I copied the same comment from the fb code over to explain this. - Otherwise we need to sufficiently restrict blob_lock critical sections to avoid all the unreference calls. Easy to do once the blob_lock only protects the list, and no longer the weak reference. Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Stone <daniels@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-22drm/mode: move framebuffer reference into object.Dave Airlie1-4/+28
This is the initial code to add references to some mode objects. In the future we need to start reference counting connectors so firstly I want to reorganise the code so the framebuffer ref counting uses the same paths. This patch shouldn't change any functionality, just moves the kref. [airlied: move kerneldoc as well] Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-22drm/mode: introduce wrapper to read framebuffer refcount.Dave Airlie1-0/+11
Avoids drivers knowing where the kref is stored. [airlied: add kerneldoc] Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-22drm: Loongson-3 doesn't fully support wc memoryHuacai Chen1-0/+2
Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-22Merge tag 'drm-intel-next-2016-04-11' of git://anongit.freedesktop.org/drm-intel into drm-nextDave Airlie1-0/+19
- make modeset hw state checker atomic aware (Maarten) - close races in gpu stuck detection/seqno reading (Chris) - tons&tons of small improvements from Chris Wilson all over the gem code - more dsi/bxt work from Ramalingam&Jani - macro polish from Joonas - guc fw loading fixes (Arun&Dave) - vmap notifier (acked by Andrew) + i915 support by Chris Wilson - create bottom half for execlist irq processing (Chris Wilson) - vlv/chv pll cleanup (Ville) - rework DP detection, especially sink detection (Shubhangi Shrivastava) - make color manager support fully atomic (Maarten) - avoid livelock on chv in execlist irq handler (Chris) * tag 'drm-intel-next-2016-04-11' of git://anongit.freedesktop.org/drm-intel: (82 commits) drm/i915: Update DRIVER_DATE to 20160411 drm/i915: Avoid allocating a vmap arena for a single page drm,i915: Introduce drm_malloc_gfp() drm/i915/shrinker: Restrict vmap purge to objects with vmaps drm/i915: Refactor duplicate object vmap functions drm/i915: Consolidate common error handling in intel_pin_and_map_ringbuffer_obj drm/i915/dmabuf: Tighten struct_mutex for unmap_dma_buf drm/i915: implement WaClearTdlStateAckDirtyBits drm/i915/bxt: Reversed polarity of PORT_PLL_REF_SEL bit drm/i915: Rename hw state checker to hw state verifier. drm/i915: Move modeset state verifier calls. drm/i915: Make modeset state verifier take crtc as argument. drm/i915: Replace manual barrier() with READ_ONCE() in HWS accessor drm/i915: Use simplest form for flushing the single cacheline in the HWS drm/i915: Harden detection of missed interrupts drm/i915: Separate out the seqno-barrier from engine->get_seqno drm/i915: Remove forcewake dance from seqno/irq barrier on legacy gen6+ drm/i915: Fixup the free space logic in ring_prepare drm/i915: Simplify check for idleness in hangcheck drm/i915: Apply a mb between emitting the request and hangcheck ...
2016-04-22Merge tag 'v4.6-rc3' into drm-nextDave Airlie1-1/+1
Backmerge 4.6-rc3 for i915. Linux 4.6-rc3
2016-04-22Merge tag 'topic/drm-misc-2016-04-21' of git://anongit.freedesktop.org/drm-intel into drm-nextDave Airlie3-4/+19
misc pull req all over. Biggest thing is the drm_connector_(un)register_all cleanup from Alexey for drivers without the load/unload midlayer hooks. I.e. all the new ones, and a bunch of the pending new atomic drivers depend upon this. Or at least I asked them to rebase ;-) * tag 'topic/drm-misc-2016-04-21' of git://anongit.freedesktop.org/drm-intel: drm: Make drm.debug parameter description more helpful drm: Remove warning from drm_connector_unregister_all() drm: probe_helper: Hide ugly ifdef drm: rcar-du: Use generic drm_connector_register_all() helper drm: atmel_hldc: Use generic drm_connector_register_all() helper drm: Introduce drm_connector_register_all() helper drm: fix lut value extraction function drm/atomic-helper: Print an error if vblank wait times out drm/dp/mst: Restore primary hub guid on resume drm: Release driver references to handle before making it available again drm/i915/dp/mst: Add source port info to debugfs output drm/dp/mst: Enhance DP MST debugfs output drm/edid: Add drm_edid_get_monitor_name() include/drm: Reword debug categories comment. drm/crtc_helper: Reset empty plane state in drm_helper_crtc_mode_set_base() drm/virtio: Drop dummy gamma table support drm/bochs: Drop fake gamma support drm/core: Fix ordering in drm_mode_config_cleanup.
2016-04-20drm: probe_helper: Hide ugly ifdefEzequiel Garcia1-0/+8
Push the ifdef to the drm_edid.h and create a stub, for the DRM_LOAD_EDID_FIRMWARE=n case. This removes some clutter in the code, making it more readable. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461087638-16959-1-git-send-email-ezequiel@vanguardiasur.com.ar
2016-04-20drm: Introduce drm_connector_register_all() helperAlexey Brodkin1-1/+2
As a pair to already existing drm_connector_unregister_all() we're adding generic implementation of what is already done in some drivers. Once this helper is implemented we'll be ready to switch existing driver-specific implementations with the generic one. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461068693-11260-2-git-send-email-abrodkin@synopsys.com
2016-04-20drm/vma_manage: Drop has_offsetDaniel Vetter1-14/+1
It's racy, creating mmap offsets is a slowpath, so better to remove it to avoid drivers doing broken things. The only user is i915, and it's ok there because everything (well almost) is protected by dev->struct_mutex in i915-gem. While at it add a note in the create_mmap_offset kerneldoc that drivers must release it again. And then I also noticed that drm_gem_object_release entirely lacks kerneldoc. Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-14-git-send-email-daniel.vetter@ffwll.ch
2016-04-20drm: fix lut value extraction functionLionel Landwerlin1-2/+6
When extracting the value at full precision (16 bits), no need to round the value. This was spotted by Jani when running sparse. Unfortunately this fix doesn't get rid of the warning. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reported-by: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Stone <daniels@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: dri-devel@lists.freedesktop.org Fixes: 5488dc16fde7 ("drm: introduce pipe color correction properties") Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1458655833-19547-1-git-send-email-lionel.g.landwerlin@intel.com
2016-04-15drm/edid: Add drm_edid_get_monitor_name()Jim Bride1-0/+2
In order to include monitor name information in debugfs output we needed to add a function that would extract the monitor name from the EDID, and that function needed to reside in the file where the rest of the EDID helper functions are implemented. v2: Refactor to have drm_edid_get_monitor_name() and drm_edid_to_eld() use a common helper function to extract the monitor name from the edid. [Jani] + rebase. v3: Minor changes suggested by Jani + rebase. v4: Few more minor changes suggested by Jani + rebase. cc: dri-devel@lists.freedesktop.org cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460654317-31288-1-git-send-email-jim.bride@linux.intel.com
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.