aboutsummaryrefslogtreecommitdiffstats
path: root/include/drm (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-02-14net/smc: transfer fasync_list in case of fallbackUrsula Braun1-0/+2
SMC does not work together with FASTOPEN. If sendmsg() is called with flag MSG_FASTOPEN in SMC_INIT state, the SMC-socket switches to fallback mode. To handle the previous ioctl FIOASYNC call correctly in this case, it is necessary to transfer the socket wait queue fasync_list to the internal TCP socket. Reported-by: syzbot+4b1fe8105f8044a26162@syzkaller.appspotmail.com Fixes: ee9dfbef02d18 ("net/smc: handle sockopts forcing fallback") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples()Guangbin Huang1-6/+9
The IPv6 address defined in struct in6_addr is specified as big endian, but there is no specified endian in struct hclge_fd_rule_tuples, so it will cause a problem if directly use memcpy() to copy ipv6 address between these two structures since this field in struct hclge_fd_rule_tuples is little endian. This patch fixes this problem by using be32_to_cpu() to convert endian of IPv6 address of struct in6_addr before copying. Fixes: d93ed94fbeaf ("net: hns3: add aRFS support for PF") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: hns3: fix VF bandwidth does not take effect in some caseYonglong Liu1-1/+1
When enabling 4 TC after setting the bandwidth of VF, the bandwidth of VF will resume to default value, because of the qset resources changed in this case. This patch fixes it by using a fixed VF's qset resources according to HNAE3_MAX_TC macro. Fixes: ee9e44248f52 ("net: hns3: add support for configuring bandwidth of VF on the host") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: hns3: add management table after IMP resetYufeng Mo1-0/+7
In the current process, the management table is missing after the IMP reset. This patch adds the management table to the reset process. Fixes: f5aac71c0327 ("net: hns3: add manager table initialization for hardware") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14mac80211: fix wrong 160/80+80 MHz settingShay Bar1-2/+14
Before this patch, STA's would set new width of 160/80+80 MHz based on AP capability only. This is wrong because STA may not support > 80MHz BW. Fix is to verify STA has 160/80+80 MHz capability before increasing its width to > 80MHz. The "support_80_80" and "support_160" setting is based on: "Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW Support subfield at a STA transmitting the VHT Capabilities Information field" From "Draft P802.11REVmd_D3.0.pdf" Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com> Signed-off-by: Shay Bar <shay.bar@celeno.com> Link: https://lore.kernel.org/r/20200210130728.23674-1-shay.bar@celeno.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-14cfg80211: add missing policy for NL80211_ATTR_STATUS_CODESergey Matyukevich1-0/+1
The nl80211_policy is missing for NL80211_ATTR_STATUS_CODE attribute. As a result, for strictly validated commands, it's assumed to not be supported. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200213131608.10541-2-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-13xfrm: interface: use icmp_ndo_send helperJason A. Donenfeld1-3/+3
Because xfrmi is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13wireguard: device: use icmp_ndo_send helperJason A. Donenfeld2-2/+13
Because wireguard is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. This commit adds a small test to the wireguard test suite to ensure that the new functions continue doing the right thing in the context of wireguard. It does this by setting up a condition that will definately evoke an icmp error message from the driver, but along a nat'd path. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13sunvnet: use icmp_ndo_send helperJason A. Donenfeld1-19/+4
Because sunvnet is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. While we're at it, doing the additional route lookup before calling icmp_ndo_send is superfluous, since this is the job of the icmp code in the first place. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13gtp: use icmp_ndo_send helperJason A. Donenfeld1-2/+2
Because gtp is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13icmp: introduce helper for nat'd source address in network device contextJason A. Donenfeld4-0/+79
This introduces a helper function to be called only by network drivers that wraps calls to icmp[v6]_send in a conntrack transformation, in case NAT has been used. We don't want to pollute the non-driver path, though, so we introduce this as a helper to be called by places that actually make use of this, as suggested by Florian. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13net/sched: flower: add missing validation of TCA_FLOWER_FLAGSDavide Caratti1-0/+1
unlike other classifiers that can be offloaded (i.e. users can set flags like 'skip_hw' and 'skip_sw'), 'cls_flower' doesn't validate the size of netlink attribute 'TCA_FLOWER_FLAGS' provided by user: add a proper entry to fl_policy. Fixes: 5b33f48842fa ("net/flower: Introduce hardware offload support") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGSDavide Caratti1-0/+1
unlike other classifiers that can be offloaded (i.e. users can set flags like 'skip_hw' and 'skip_sw'), 'cls_matchall' doesn't validate the size of netlink attribute 'TCA_MATCHALL_FLAGS' provided by user: add a proper entry to mall_policy. Fixes: b87f7936a932 ("net/sched: Add match-all classifier hw offloading.") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13net/flow_dissector: remove unexist field descriptionHangbin Liu1-1/+0
@thoff has moved to struct flow_dissector_key_control. Fixes: 42aecaa9bb2b ("net: Get skb hash over flow_keys structure") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13page_pool: refill page when alloc.count of pool is zeroLi RongQing1-14/+8
"do {} while" in page_pool_refill_alloc_cache will always refill page once whether refill is true or false, and whether alloc.count of pool is less than PP_ALLOC_CACHE_REFILL or not this is wrong, and will cause overflow of pool->alloc.cache the caller of __page_pool_get_cached should provide guarantee that pool->alloc.cache is safe to access, so in_serving_softirq should be removed as suggested by Jesper Dangaard Brouer in https://patchwork.ozlabs.org/patch/1233713/ so fix this issue by calling page_pool_refill_alloc_cache() only when pool->alloc.count is zero Fixes: 44768decb7c0 ("page_pool: handle page recycle for NUMA_NO_NODE condition") Signed-off-by: Li RongQing <lirongqing@baidu.com> Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-12ice: Trivial fixesTony Nguyen11-29/+31
This is a collection of trivial fixes including fixing whitespace, typos, function headers, reverse Christmas tree, etc. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Use correct netif error functionBen Shelton1-1/+1
Use the correct netif_msg_[tx,rx]_error() function to determine whether to print the MDD event type. Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Cleanup ice_vsi_alloc_q_vectorsAnirudh Venkataramanan1-8/+3
1. Remove local variable num_q_vectors and use vsi->num_q_vectors instead 2. Remove local variable pf and pass vsi->back to ice_pf_to_dev Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Make print statements more compactAnirudh Venkataramanan8-227/+123
Formatting strings in print function calls (like dev_info, dev_err, etc.) can exceed 80 columns without making checkpatch unhappy. So remove newlines where applicable and make print statements more compact. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Use ice_pf_to_devAnirudh Venkataramanan6-27/+27
Use ice_pf_to_dev(pf) instead of &pf->pdev->dev Use ice_pf_to_dev(vsi->back) instead of &vsi->back->pdev->dev When a pointer to the pf instance is available, use ice_pf_to_dev instead of ice_hw_to_dev Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Remove possible null dereferenceTony Nguyen1-2/+0
Commit 1f45ebe0d8fb ("ice: add extra check for null Rx descriptor") moved the call to ice_construct_skb() under a null check as Coverity reported a possible use of null skb. However, the original call was not deleted, do so now. Fixes: 1f45ebe0d8fb ("ice: add extra check for null Rx descriptor") Reported-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: update Unit Load Status bitmask to check after resetBruce Allan2-5/+18
After a reset the Unit Load Status bits in the GLNVM_ULD register to check for completion should be 0x7FF before continuing. Update the mask to check (minus the three reserved bits that are always set). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: fix and consolidate logging of NVM/firmware version informationBruce Allan4-28/+13
Logging the firmware/NVM information during driver load is redundant since that information is also available via ethtool. Move the functionality found in ice_nvm_version_str() directly into ice_get_drvinfo() and remove calling the former and logging that info during driver probe. This also gets rid of a bug in ice_nvm_version_str() where it returns a pointer to a buffer which is free'ed when that function exits. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Modify link message loggingAkeem G Abodunrin1-1/+1
This patch modifies link message logging to include "Full Duplex" and "Negotiated" for FEC, so as to distinguish it from "Requested" FEC. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Remove CONFIG_PCI_IOV wrap in ice_set_pf_capsAnirudh Venkataramanan1-2/+0
Remove unnecessary CONFIG_PCI_IOV wrapping in ice_set_pf_caps. None of the data structures accessed within the block are wrapped with this flag. When CONFIG_PCI_IOV is undefined, pf->num_vfs_supported will be 0 anyway. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Remove ice_dev_onetime_setup()Brett Creeley4-20/+0
ice_dev_onetime_setup contains driver workarounds needed for firmware limitations. These issues have now been resolved in newer NVMs so remove the function. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Don't allow same value for Rx tail to be written twiceBrett Creeley1-1/+1
Currently we compare the value we are about to write to the Rx tail register with the previous value of next_to_use. The problem with this is we only write tail on 8 descriptor boundaries, but next_to_use is updated whenever we clean Rx descriptors. Fix this by comparing the value we are about to write to tail with the previously written tail value. This will prevent duplicate Rx tail bumps. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: display supported and advertised link modesPaul Greenwalt1-280/+2
Display all of the supported and advertised link modes based on the PHY capability with media. Displaying all supported modes is more informative then only displaying the current link mode. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Fix switch between FW and SW LLDPDave Ertman1-5/+5
When switching between FW and SW LLDP mode, the number of configured TLV apps in the driver's DCB configuration is getting out of synch with what lldpad thinks is configured. This is causing a problem when shutting down lldpad. The cleanup is trying to delete TLV apps that are not defined in the kernel. Since the driver is keeping an accurate account of the apps defined, use the drivers number of apps to determine if there is an app to delete. If the number of apps is <= 1, then do not attempt to delete. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Fix DCB rebuild after resetDave Ertman2-53/+36
The function ice_dcb_rebuild had some logic flaws in it, and also didn't differentiate between FW and SW modes needs. For FW flow, the willing setting was being forced to OFF and left that way. Unwilling in DCB FW mode is not a supported model. Leave the config alone and use the return value from the set command to determine if setting the config was successful. The SW DCB flow does not need to need to register for MIB change events (as they are not used in SW mode). Use !is_sw_lldp checks to only perform FW specific task while in FW mode. Also adding a reapplication of the current DCB config after a link event. Some NVMs are not maintaining their DCB configs across link events. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12net: ethernet: ave: Add capability of rgmii-id modeKunihiko Hayashi1-0/+9
This allows you to specify the type of rgmii-id that will enable phy internal delay in ethernet phy-mode. This adds all RGMII cases to all of get_pinmode() except LD11, because LD11 SoC doesn't support RGMII due to the constraint of the hardware. When RGMII phy mode is specified in the devicetree for LD11, the driver will abort with an error. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-12enic: prevent waking up stopped tx queues over watchdog resetFiro Yang1-1/+1
Recent months, our customer reported several kernel crashes all preceding with following message: NETDEV WATCHDOG: eth2 (enic): transmit queue 0 timed out Error message of one of those crashes: BUG: unable to handle kernel paging request at ffffffffa007e090 After analyzing severl vmcores, I found that most of crashes are caused by memory corruption. And all the corrupted memory areas are overwritten by data of network packets. Moreover, I also found that the tx queues were enabled over watchdog reset. After going through the source code, I found that in enic_stop(), the tx queues stopped by netif_tx_disable() could be woken up over a small time window between netif_tx_disable() and the napi_disable() by the following code path: napi_poll-> enic_poll_msix_wq-> vnic_cq_service-> enic_wq_service-> netif_wake_subqueue(enic->netdev, q_number)-> test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &txq->state) In turn, upper netowrk stack could queue skb to ENIC NIC though enic_hard_start_xmit(). And this might introduce some race condition. Our customer comfirmed that this kind of kernel crash doesn't occur over 90 days since they applied this patch. Signed-off-by: Firo Yang <firo.yang@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11net: ena: ena-com.c: prevent NULL pointer dereferenceArthur Kiyanovski1-0/+5
comp_ctx can be NULL in a very rare case when an admin command is executed during the execution of ena_remove(). The bug scenario is as follows: * ena_destroy_device() sets the comp_ctx to be NULL * An admin command is executed before executing unregister_netdev(), this can still happen because our device can still receive callbacks from the netdev infrastructure such as ethtool commands. * When attempting to access the comp_ctx, the bug occurs since it's set to NULL Fix: Added a check that comp_ctx is not NULL Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11net: ena: ethtool: use correct value for crc32 hashSameeh Jubran1-2/+2
Up till kernel 4.11 there was no enum defined for crc32 hash in ethtool, thus the xor enum was used for supporting crc32. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11net: ena: make ena rxfh support ETH_RSS_HASH_NO_CHANGEArthur Kiyanovski3-0/+16
As the name suggests ETH_RSS_HASH_NO_CHANGE is received upon changing the key or indirection table using ethtool while keeping the same hash function. Also add a function for retrieving the current hash function from the ena-com layer. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: Saeed Bshara <saeedb@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11net: ena: fix corruption of dev_idx_to_host_tblArthur Kiyanovski1-28/+0
The function ena_com_ind_tbl_convert_from_device() has an overflow bug as explained below. Either way, this function is not needed at all since we don't retrieve the indirection table from the device at any point which means that this conversion is not needed. The bug: The for loop iterates over all io_sq_queues, when passing the actual number of used queues the io_sq_queues[i].idx equals 0 since they are uninitialized which results in the following code to be executed till the end of the loop: dev_idx_to_host_tbl[0] = i; This results dev_idx_to_host_tbl[0] in being equal to ENA_TOTAL_NUM_QUEUES - 1. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11net: ena: fix incorrectly saving queue numbers when setting RSS indirection tableArthur Kiyanovski2-1/+25
The indirection table has the indices of the Rx queues. When we store it during set indirection operation, we convert the indices to our internal representation of the indices. Our internal representation of the indices is: even indices for Tx and uneven indices for Rx, where every Tx/Rx pair are in a consecutive order starting from 0. For example if the driver has 3 queues (3 for Tx and 3 for Rx) then the indices are as follows: 0 1 2 3 4 5 Tx Rx Tx Rx Tx Rx The BUG: The issue is that when we satisfy a get request for the indirection table, we don't convert the indices back to the original representation. The FIX: Simply apply the inverse function for the indices of the indirection table after we set it. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11net: ena: rss: store hash function as values and not bitsArthur Kiyanovski1-1/+5
The device receives, stores and retrieves the hash function value as bits and not as their enum value. The bug: * In ena_com_set_hash_function() we set cmd.u.flow_hash_func.selected_func to the bit value of rss->hash_func. (1 << rss->hash_func) * In ena_com_get_hash_function() we retrieve the hash function and store it's bit value in rss->hash_func. (Now the bit value of rss->hash_func is stored in rss->hash_func instead of it's enum value) The fix: This commit fixes the issue by converting the retrieved hash function values from the device to the matching enum value of the set bit using ffs(). ffs() finds the first set bit's index in a word. Since the function returns 1 for the LSB's index, we need to subtract 1 from the returned value (note that BIT(0) is 1). Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11net: ena: rss: fix failure to get indirection tableSameeh Jubran1-0/+14
On old hardware, getting / setting the hash function is not supported while gettting / setting the indirection table is. This commit enables us to still show the indirection table on older hardwares by setting the hash function and key to NULL. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11net: ena: rss: do not allocate key when not supportedSameeh Jubran1-3/+21
Currently we allocate the key whether the device supports setting the key or not. This commit adds a check to the allocation function and handles the error accordingly. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11net: ena: fix incorrect default RSS keyArthur Kiyanovski2-0/+16
Bug description: When running "ethtool -x <if_name>" the key shows up as all zeros. When we use "ethtool -X <if_name> hfunc toeplitz hkey <some:random:key>" to set the key and then try to retrieve it using "ethtool -x <if_name>" then we return the correct key because we return the one we saved. Bug cause: We don't fetch the key from the device but instead return the key that we have saved internally which is by default set to zero upon allocation. Fix: This commit fixes the issue by initializing the key to a random value using netdev_rss_key_fill(). Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11net: ena: add missing ethtool TX timestamping indicationArthur Kiyanovski1-0/+1
Current implementation of the driver calls skb_tx_timestamp()to add a software tx timestamp to the skb, however the software-transmit capability is not reported in ethtool -T. This commit updates the ethtool structure to report the software-transmit capability in ethtool -T using the standard ethtool_op_get_ts_info(). This function reports all software timestamping capabilities (tx and rx), as well as setting phc_index = -1. phc_index is the index of the PTP hardware clock device that will be used for hardware timestamps. Since we don't have such a device in ENA, using the default -1 value is the correct setting. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Ezequiel Lara Gomez <ezegomez@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11net: ena: fix uses of round_jiffies()Arthur Kiyanovski1-3/+3
>From the documentation of round_jiffies(): "Rounds a time delta in the future (in jiffies) up or down to (approximately) full seconds. This is useful for timers for which the exact time they fire does not matter too much, as long as they fire approximately every X seconds. By rounding these timers to whole seconds, all such timers will fire at the same time, rather than at various times spread out. The goal of this is to have the CPU wake up less, which saves power." There are 2 parts to this patch: ================================ Part 1: ------- In our case we need timer_service to be called approximately every X=1 seconds, and the exact time does not matter, so using round_jiffies() is the right way to go. Therefore we add round_jiffies() to the mod_timer() in ena_timer_service(). Part 2: ------- round_jiffies() is used in check_for_missing_keep_alive() when getting the jiffies of the expiration of the keep_alive timeout. Here it is actually a mistake to use round_jiffies() because we want the exact time when keep_alive should expire and not an approximate rounded time, which can cause early, false positive, timeouts. Therefore we remove round_jiffies() in the calculation of keep_alive_expired() in check_for_missing_keep_alive(). Fixes: 82ef30f13be0 ("net: ena: add hardware hints capability to the driver") Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11net: ena: fix potential crash when rxfh key is NULLArthur Kiyanovski1-8/+9
When ethtool -X is called without an hkey, ena_com_fill_hash_function() is called with key=NULL, which is passed to memcpy causing a crash. This commit fixes this issue by checking key is not NULL. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11net/smc: fix leak of kernel memory to user spaceEric Dumazet1-3/+2
As nlmsg_put() does not clear the memory that is reserved, it this the caller responsability to make sure all of this memory will be written, in order to not reveal prior content. While we are at it, we can provide the socket cookie even if clsock is not set. syzbot reported : BUG: KMSAN: uninit-value in __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline] BUG: KMSAN: uninit-value in __fswab32 include/uapi/linux/swab.h:59 [inline] BUG: KMSAN: uninit-value in __swab32p include/uapi/linux/swab.h:179 [inline] BUG: KMSAN: uninit-value in __be32_to_cpup include/uapi/linux/byteorder/little_endian.h:82 [inline] BUG: KMSAN: uninit-value in get_unaligned_be32 include/linux/unaligned/access_ok.h:30 [inline] BUG: KMSAN: uninit-value in ____bpf_skb_load_helper_32 net/core/filter.c:240 [inline] BUG: KMSAN: uninit-value in ____bpf_skb_load_helper_32_no_cache net/core/filter.c:255 [inline] BUG: KMSAN: uninit-value in bpf_skb_load_helper_32_no_cache+0x14a/0x390 net/core/filter.c:252 CPU: 1 PID: 5262 Comm: syz-executor.5 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline] __fswab32 include/uapi/linux/swab.h:59 [inline] __swab32p include/uapi/linux/swab.h:179 [inline] __be32_to_cpup include/uapi/linux/byteorder/little_endian.h:82 [inline] get_unaligned_be32 include/linux/unaligned/access_ok.h:30 [inline] ____bpf_skb_load_helper_32 net/core/filter.c:240 [inline] ____bpf_skb_load_helper_32_no_cache net/core/filter.c:255 [inline] bpf_skb_load_helper_32_no_cache+0x14a/0x390 net/core/filter.c:252 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_kmalloc_large+0x73/0xc0 mm/kmsan/kmsan_hooks.c:128 kmalloc_large_node_hook mm/slub.c:1406 [inline] kmalloc_large_node+0x282/0x2c0 mm/slub.c:3841 __kmalloc_node_track_caller+0x44b/0x1200 mm/slub.c:4368 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] netlink_dump+0x44b/0x1ab0 net/netlink/af_netlink.c:2224 __netlink_dump_start+0xbb2/0xcf0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:233 [inline] smc_diag_handler_dump+0x2ba/0x300 net/smc/smc_diag.c:242 sock_diag_rcv_msg+0x211/0x610 net/core/sock_diag.c:256 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:275 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] kernel_sendmsg+0x433/0x440 net/socket.c:679 sock_no_sendpage+0x235/0x300 net/core/sock.c:2740 kernel_sendpage net/socket.c:3776 [inline] sock_sendpage+0x1e1/0x2c0 net/socket.c:937 pipe_to_sendpage+0x38c/0x4c0 fs/splice.c:458 splice_from_pipe_feed fs/splice.c:512 [inline] __splice_from_pipe+0x539/0xed0 fs/splice.c:636 splice_from_pipe fs/splice.c:671 [inline] generic_splice_sendpage+0x1d5/0x2d0 fs/splice.c:844 do_splice_from fs/splice.c:863 [inline] do_splice fs/splice.c:1170 [inline] __do_sys_splice fs/splice.c:1447 [inline] __se_sys_splice+0x2380/0x3350 fs/splice.c:1427 __x64_sys_splice+0x6e/0x90 fs/splice.c:1427 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: f16a7dd5cf27 ("smc: netlink interface for SMC sockets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11i40e: Fix the conditional for i40e_vc_validate_vqs_bitmapsBrett Creeley1-2/+2
Commit d9d6a9aed3f6 ("i40e: Fix virtchnl_queue_select bitmap validation") introduced a necessary change for verifying how queue bitmaps from the iavf driver get validated. Unfortunately, the conditional was reversed. Fix this. Fixes: d9d6a9aed3f6 ("i40e: Fix virtchnl_queue_select bitmap validation") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11core: Don't skip generic XDP program execution for cloned SKBsToke Høiland-Jørgensen1-2/+2
The current generic XDP handler skips execution of XDP programs entirely if an SKB is marked as cloned. This leads to some surprising behaviour, as packets can end up being cloned in various ways, which will make an XDP program not see all the traffic on an interface. This was discovered by a simple test case where an XDP program that always returns XDP_DROP is installed on a veth device. When combining this with the Scapy packet sniffer (which uses an AF_PACKET) socket on the sending side, SKBs reliably end up in the cloned state, causing them to be passed through to the receiving interface instead of being dropped. A minimal reproducer script for this is included below. This patch fixed the issue by simply triggering the existing linearisation code for cloned SKBs instead of skipping the XDP program execution. This behaviour is in line with the behaviour of the native XDP implementation for the veth driver, which will reallocate and copy the SKB data if the SKB is marked as shared. Reproducer Python script (requires BCC and Scapy): from scapy.all import TCP, IP, Ether, sendp, sniff, AsyncSniffer, Raw, UDP from bcc import BPF import time, sys, subprocess, shlex SKB_MODE = (1 << 1) DRV_MODE = (1 << 2) PYTHON=sys.executable def client(): time.sleep(2) # Sniffing on the sender causes skb_cloned() to be set s = AsyncSniffer() s.start() for p in range(10): sendp(Ether(dst="aa:aa:aa:aa:aa:aa", src="cc:cc:cc:cc:cc:cc")/IP()/UDP()/Raw("Test"), verbose=False) time.sleep(0.1) s.stop() return 0 def server(mode): prog = BPF(text="int dummy_drop(struct xdp_md *ctx) {return XDP_DROP;}") func = prog.load_func("dummy_drop", BPF.XDP) prog.attach_xdp("a_to_b", func, mode) time.sleep(1) s = sniff(iface="a_to_b", count=10, timeout=15) if len(s): print(f"Got {len(s)} packets - should have gotten 0") return 1 else: print("Got no packets - as expected") return 0 if len(sys.argv) < 2: print(f"Usage: {sys.argv[0]} <skb|drv>") sys.exit(1) if sys.argv[1] == "client": sys.exit(client()) elif sys.argv[1] == "server": mode = SKB_MODE if sys.argv[2] == 'skb' else DRV_MODE sys.exit(server(mode)) else: try: mode = sys.argv[1] if mode not in ('skb', 'drv'): print(f"Usage: {sys.argv[0]} <skb|drv>") sys.exit(1) print(f"Running in {mode} mode") for cmd in [ 'ip netns add netns_a', 'ip netns add netns_b', 'ip -n netns_a link add a_to_b type veth peer name b_to_a netns netns_b', # Disable ipv6 to make sure there's no address autoconf traffic 'ip netns exec netns_a sysctl -qw net.ipv6.conf.a_to_b.disable_ipv6=1', 'ip netns exec netns_b sysctl -qw net.ipv6.conf.b_to_a.disable_ipv6=1', 'ip -n netns_a link set dev a_to_b address aa:aa:aa:aa:aa:aa', 'ip -n netns_b link set dev b_to_a address cc:cc:cc:cc:cc:cc', 'ip -n netns_a link set dev a_to_b up', 'ip -n netns_b link set dev b_to_a up']: subprocess.check_call(shlex.split(cmd)) server = subprocess.Popen(shlex.split(f"ip netns exec netns_a {PYTHON} {sys.argv[0]} server {mode}")) client = subprocess.Popen(shlex.split(f"ip netns exec netns_b {PYTHON} {sys.argv[0]} client")) client.wait() server.wait() sys.exit(server.returncode) finally: subprocess.run(shlex.split("ip netns delete netns_a")) subprocess.run(shlex.split("ip netns delete netns_b")) Fixes: d445516966dc ("net: xdp: support xdp generic on virtual devices") Reported-by: Stepan Horacek <shoracek@redhat.com> Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-10qmi_wwan: unconditionally reject 2 ep interfacesBjørn Mork1-27/+15
We have been using the fact that the QMI and DIAG functions usually are the only ones with class/subclass/protocol being ff/ff/ff on Quectel modems. This has allowed us to match the QMI function without knowing the exact interface number, which can vary depending on firmware configuration. The ability to silently reject the DIAG function, which is usually handled by the option driver, is important for this method to work. This is done based on the knowledge that it has exactly 2 bulk endpoints. QMI function control interfaces will have either 3 or 1 endpoint. This rule is universal so the quirk condition can be removed. The fixed layouts known from the Gobi1k and Gobi2k modems have been gradually replaced by more dynamic layouts, and many vendors now use configurable layouts without changing device IDs. Renaming the class/subclass/protocol matching macro makes it more obvious that this is now not Quectel specific anymore. Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-10net: dsa: mv88e6xxx: Prevent truncation of longer interrupt namesAndrew Lunn1-6/+6
When adding support for unique interrupt names, after testing on a few devices, it was assumed 32 characters would be sufficient. This assumption turned out to be incorrect, ZII RDU2 for example uses a device base name of mv88e6xxx-30be0000.ethernet-1:0, leaving no space for post fixes such as -g1-atu-prob and -watchdog. The names then become identical, defeating the point of the patch. Increase the length of the string to 64 charactoes. Reported-by: Chris Healy <Chris.Healy@zii.aero> Fixes: 3095383a8ab4 ("net: dsa: mv88e6xxx: Unique IRQ name") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-10qmi_wwan: re-add DW5821e pre-production variantBjørn Mork1-0/+1
Commit f25e1392fdb5 removed the support for the pre-production variant of the Dell DW5821e to avoid probing another USB interface unnecessarily. However, the pre-production samples are found in the wild, and this lack of support is causing problems for users of such samples. It is therefore necessary to support both variants. Matching on both interfaces 0 and 1 is not expected to cause any problem with either variant, as only the QMI function will be probed successfully on either. Interface 1 will be rejected based on the HID class for the production variant: T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option And interface 0 will be rejected based on too few endpoints for the pre-production variant: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev= 3.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver= I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option Fixes: f25e1392fdb5 ("qmi_wwan: fix interface number for DW5821e production firmware") Link: https://whrl.pl/Rf0vNk Reported-by: Lars Melin <larsm17@gmail.com> Cc: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.