aboutsummaryrefslogtreecommitdiffstats
path: root/include/dt-bindings/clock (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-11-27Merge branches 'clk-ingenic', 'clk-init-leak', 'clk-ux500' and 'clk-bitmain' into clk-nextStephen Boyd2-0/+126
- Support CGU in Ingenix X1000 - Support Bitmain BM1880 clks * clk-ingenic: clk: ingenic: Allow drivers to be built with COMPILE_TEST clk: Ingenic: Add CGU driver for X1000. dt-bindings: clock: Add X1000 bindings. * clk-init-leak: clk: mark clk_disable_unused() as __init clk: Fix memory leak in clk_unregister() * clk-ux500: MAINTAINERS: Update section for Ux500 clock drivers * clk-bitmain: MAINTAINERS: Add entry for BM1880 SoC clock driver clk: Add common clock driver for BM1880 SoC dt-bindings: clock: Add devicetree binding for BM1880 SoC clk: Add clk_hw_unregister_composite helper function definition clk: Zero init clk_init_data in helpers
2019-11-27Merge branches 'clk-gpio-flags', 'clk-tegra', 'clk-rockchip', 'clk-sprd' and 'clk-pxa' into clk-nextStephen Boyd3-4/+7
- Make gpio gate clks propagate rate setting up to parent * clk-gpio-flags: clk: clk-gpio: propagate rate change to parent * clk-tegra: (23 commits) clk: tegra: Use match_string() helper to simplify the code clk: tegra: Fix build error without CONFIG_PM_SLEEP clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP clk: tegra: Optimize PLLX restore on Tegra20/30 clk: tegra: Add suspend and resume support on Tegra210 clk: tegra: Share clk and rst register defines with Tegra clock driver clk: tegra: Use fence_udelay() during PLLU init clk: tegra: clk-dfll: Add suspend and resume support clk: tegra: clk-super: Add restore-context support clk: tegra: clk-super: Fix to enable PLLP branches to CPU clk: tegra: periph: Add restore_context support clk: tegra: Support for OSC context save and restore clk: tegra: pll: Save and restore pll context clk: tegra: pllout: Save and restore pllout context clk: tegra: divider: Save and restore divider rate clk: tegra: Reimplement SOR clocks on Tegra210 clk: tegra: Reimplement SOR clock on Tegra124 clk: tegra: Rename sor0_lvds to sor0_out clk: tegra: Move SOR0 implementation to Tegra124 clk: tegra: Remove last remains of TEGRA210_CLK_SOR1_SRC ... * clk-rockchip: clk: rockchip: protect the pclk_usb_grf as critical on px30 clk: rockchip: add video-related niu clocks as critical on px30 clk: rockchip: move px30 critical clocks to correct clock controller clk: rockchip: Add div50 clocks for px30 sdmmc, emmc, sdio and nandc clk: rockchip: Add div50 clock-ids for sdmmc on px30 and nandc clk: rockchip: make clk_half_divider_ops static * clk-sprd: clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle() * clk-pxa: clk: pxa: fix one of the pxa RTC clocks
2019-11-27Merge branches 'clk-ti', 'clk-allwinner', 'clk-qcom', 'clk-sa' and 'clk-aspeed' into clk-nextStephen Boyd7-1/+190
- Qualcomm MSM8998 GPU clk controllers - Qualcomm SC7180 GCC and RPMH clk controllers - Qualcomm QCS404 Q6SSTOP clk controllers - Use struct_size() some more in various clk drivers * clk-ti: clk/ti/adpll: allocate room for terminating null ARM: dts: omap3: fix DPLL4 M4 divider max value clk: ti: divider: convert to use min,max,mask instead of width clk: ti: divider: cleanup ti_clk_parse_divider_data API clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table clk: ti: am43xx: drop idlest polling from gfx clock clk: ti: am33xx: drop idlest polling from gfx clock clk: ti: am33xx: drop idlest polling from pruss clkctrl clock clk: ti: am43xx: drop idlest polling from pruss clkctrl clock clk: ti: omap5: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: omap4: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: dra7xx: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: omap5: add IVA subsystem clkctrl data dt-bindings: clk: add omap5 iva clkctrl definitions clk: ti: clkctrl: add new exported API for checking standby info clk: ti: clkctrl: convert to use bit helper macros instead of bitops clk: ti: clkctrl: fix setting up clkctrl clocks * clk-allwinner: clk: sunxi-ng: h3: Export MBUS clock clk: sunxi-ng: h6: Allow GPU to change parent rate clk: sunxi-ng: h6: Use sigma-delta modulation for audio PLL * clk-qcom: clk: qcom: rpmh: Reuse sdm845 clks for sm8150 clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver clk: qcom: Allow constant ratio freq tables for rcg clk: qcom: smd: Add missing pnoc clock clk: qcom: Enumerate clocks and reset needed to boot the 8998 modem clk: qcom: clk-rpmh: Add support for RPMHCC for SC7180 dt-bindings: clock: Introduce RPMHCC bindings for SC7180 dt-bindings: clock: Add YAML schemas for the QCOM RPMHCC clock bindings clk: qcom: Add Global Clock controller (GCC) driver for SC7180 dt-bindings: clock: Add sc7180 GCC clock binding dt-bindings: clock: Add YAML schemas for the QCOM GCC clock bindings clk: qcom: common: Return NULL from clk_hw OF provider clk: qcom: rcg: update the DFS macro for RCG clk: qcom: remove unneeded semicolon clk: qcom: Add Q6SSTOP clock controller for QCS404 dt-bindings: clock: qcom: Add QCOM Q6SSTOP clock controller bindings * clk-sa: drivers/clk: convert VL struct to struct_size * clk-aspeed: clk: aspeed: Add RMII RCLK gates for both AST2500 MACs clk: ast2600: Add RMII RCLK gates for all four MACs dt-bindings: clock: Add AST2600 RMII RCLK gate definitions dt-bindings: clock: Add AST2500 RMII RCLK definitions
2019-11-27Merge branches 'clk-hisi', 'clk-amlogic', 'clk-samsung', 'clk-renesas' and 'clk-imx' into clk-nextStephen Boyd7-3/+192
* clk-hisi: clk: hi6220: use CLK_OF_DECLARE_DRIVER * clk-amlogic: clk: meson: axg-audio: use devm_platform_ioremap_resource() to simplify code clk: meson: axg_audio: add sm1 support clk: meson: axg-audio: provide clk top signal name clk: meson: axg-audio: prepare sm1 addition clk: meson: axg-audio: fix regmap last register clk: meson: axg-audio: remove useless defines dt-bindings: clock: meson: add sm1 resets to the axg-audio controller dt-bindings: clk: axg-audio: add sm1 bindings clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes clk: meson: g12a: fix cpu clock rate setting clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate * clk-samsung: clk: samsung: exynos5420: Add SET_RATE_PARENT flag to clocks on G3D path clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume clk: samsung: exynos5420: Add VPLL rate table clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU clk: samsung: exynos5433: Fix error paths * clk-renesas: (23 commits) clk: renesas: r8a7796: Add R8A77961 CPG/MSSR support clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960 dt-bindings: clock: renesas: cpg-mssr: Document r8a77961 support clk: renesas: r8a77965: Remove superfluous semicolon dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example dt-bindings: clock: renesas: Remove R-Car Gen2 legacy DT bindings dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions dt-bindings: power: Add r8a77961 SYSC power domain definitions clk: renesas: rcar-gen3: Switch SD clocks to .determine_rate() clk: renesas: rcar-gen3: Switch Z clocks to .determine_rate() clk: renesas: rcar-gen2: Switch Z clock to .determine_rate() clk: renesas: r8a774b1: Add TMU clock clk: renesas: cpg-mssr: Add r8a774b1 support dt-bindings: clock: renesas: cpg-mssr: Document r8a774b1 binding clk: renesas: rcar-gen3: Loop to find best rate in cpg_sd_clock_round_rate() clk: renesas: rcar-gen3: Absorb cpg_sd_clock_calc_div() clk: renesas: rcar-gen3: Avoid double table iteration in SD .set_rate() clk: renesas: rcar-gen3: Improve arithmetic divisions clk: renesas: rcar-gen2: Improve arithmetic divisions clk: renesas: Remove R-Car Gen2 legacy DT clock support ... * clk-imx: clk: imx: imx8mq: fix sys3_pll_out_sels clk: imx7ulp: do not export out IMX7ULP_CLK_MIPI_PLL clock clk: imx: imx6ul: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sx: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sll: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx7d: use imx_obtain_fixed_clk_hw to simplify code clk: imx7ulp: Correct DDR clock mux options clk: imx7ulp: Correct system clock source option #7 clk: imx: imx8mq: mark sys1/2_pll as fixed clock clk: imx: imx8mn: mark sys_pll1/2 as fixed clock clk: imx: imx8mm: mark sys_pll1/2 as fixed clock clk: imx8mn: Define gates for pll1/2 fixed dividers clk: imx8mm: Define gates for pll1/2 fixed dividers clk: imx8mq: Define gates for pll1/2 fixed dividers clk: imx: clk-pll14xx: Make two variables static clk: imx8mq: Add VIDEO2_PLL clock clk: imx8mn: Use common 1443X/1416X PLL clock structure clk: imx8mm: Move 1443X/1416X PLL clock structure to common place clk: imx: pll14xx: Fix quick switch of S/K parameter
2019-11-22dt-bindings: clock: Add devicetree binding for BM1880 SoCManivannan Sadhasivam1-0/+82
Add YAML devicetree binding for Bitmain BM1880 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20191115162901.17456-4-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-13dt-bindings: clock: Add X1000 bindings.Zhou Yanjie1-0/+44
Add the clock bindings for the X1000 Soc from Ingenic. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Link: https://lkml.kernel.org/r/1573378102-72380-2-git-send-email-zhouyanjie@zoho.com Reviewed-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-11clk: tegra: Reimplement SOR clocks on Tegra210Thierry Reding1-3/+3
In order to allow the display driver to deal uniformly with all SOR generations, implement the SOR clocks in a way that is compatible with Tegra186 and later. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Remove last remains of TEGRA210_CLK_SOR1_SRCThierry Reding1-1/+0
Later SoC generations implement this clock as SOR1_OUT. For consistency, the Tegra210 implementation was adapted to match the same name in commit 4d1dc4018573 ("dt-bindings: clock: tegra: Add sor1_out clock"). Clean up the remaining pieces by adopting the new name for the internal identifiers and remove the old alias. Note that since both SOR1_SRC and SOR1_OUT were referring to the same device tree clock ID, this does not break device tree ABI. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-07clk: qcom: Enumerate clocks and reset needed to boot the 8998 modemJeffrey Hugo1-0/+6
We need to control five additional clocks and a reset inorder to boot the modem on msm8998. If we can boot the modem, we have a place to run the wlan firmware and get wifi up and running. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lkml.kernel.org/r/20191107192136.5880-1-jeffrey.l.hugo@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-07dt-bindings: clock: Add sc7180 GCC clock bindingTaniya Das1-0/+155
Add device tree bindings for global clock subsystem clock controller for Qualcomm Technology Inc's SC7180 SoCs. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/20191014102308.27441-5-tdas@codeaurora.org Reviewed-by: Rob Herring <robh@kernel.org> [sboyd@kernel.org: Reword subject to make sc7180 specific, sort compatible] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-07clk: qcom: Add Q6SSTOP clock controller for QCS404Govind Singh1-0/+18
Add support for the Q6SSTOP clock control used on qcs404 based devices. This would allow wcss remoteproc driver to control the required WCSS Q6SSTOP clock/reset controls to bring the subsystem out of reset and shutdown the WCSS Q6DSP. Signed-off-by: Govind Singh <govinds@codeaurora.org> Link: https://lkml.kernel.org/r/20191011132928.9388-3-govinds@codeaurora.org [sboyd@kernel.org: Sort makefile] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-05clk: rockchip: Add div50 clock-ids for sdmmc on px30 and nandcFinley Xiao1-0/+2
EMMC and SDIO already have these clock-ids (still unused) only sdmmc is missing them, so fix that. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20190917081903.25139-1-heiko@sntech.de
2019-11-05clk: sunxi-ng: h3: Export MBUS clockJernej Skrabec1-1/+1
MBUS clock will be referenced in MBUS controller node. Export it. Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-11-01Merge tag 'renesas-r8a77961-dt-binding-defs-tag' into clk-renesas-for-v5.5Geert Uytterhoeven1-0/+65
Renesas R-Car M3-W+ DT Binding Definitions Clock and Power Domain definitions for the Renesas R-Car M3-W+ (R8A77961) SoC, shared by driver and DT source files.
2019-11-01dt-bindings: clock: Add r8a77961 CPG Core Clock DefinitionsGeert Uytterhoeven1-0/+65
Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car M3-W+ (R8A77961) SoC, as listed in Table 8.2b ("List of Clocks [R-Car M3-W/R-Car M3-W+]") of the R-Car Series, 3rd Generation Hardware User's Manual (Rev. 2.00, Jul. 31, 2019). A gap is added for CSIREF, to preserve compatibility with the definitions for R-Car M3-W (R8A77960). Note that internal CPG clocks (S0, S1, S2, S3, SDSRC, SSPSRC, and POST2) are not included, as they are used as internal clock sources only, and never referenced from DT. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20191023122941.12342-3-geert+renesas@glider.be
2019-11-01dt-bindings: clock: Add AST2600 RMII RCLK gate definitionsAndrew Jeffery1-0/+4
The AST2600 has an explicit gate for the RMII RCLK for each of the four MACs. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-01dt-bindings: clock: Add AST2500 RMII RCLK definitionsAndrew Jeffery1-0/+2
The AST2500 has an explicit gate for the RMII RCLK for each of the two MACs. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-10-31dt-bindings: clk: add omap5 iva clkctrl definitionsTero Kristo1-0/+4
OMAP5 device contains an IVA subsystem (Image and Video Accelerator.) IVA subsystem clkctrl definitions are currently missing, so add them. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-29dt-bindings: clock: tegra: Rename SOR0_LVDS to SOR0_OUTThierry Reding2-2/+4
Tegra186 and later call this clock SOR0_OUT. Rename it on Tegra124 and Tegra210 to make the names consistent. Keep the old name for now to keep device trees buildable until they have all been converted. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-10-28clk: imx7ulp: do not export out IMX7ULP_CLK_MIPI_PLL clockFancy Fang1-0/+1
The mipi pll clock comes from the MIPI PHY PLL output, so it should not be a fixed clock. MIPI PHY PLL is in the MIPI DSI space, and it is used as the bit clock for transferring the pixel data out and its output clock is configured according to the display mode. So it should be used only for MIPI DSI and not be exported out for other usages. Signed-off-by: Fancy Fang <chen.fang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25clk: imx8mn: Define gates for pll1/2 fixed dividersLeonard Crestez1-1/+18
On imx8mn there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2 each with their own gate. Only one of these gates (the one "dividing" by one) is currently defined and it's incorrectly set as the parent of all the fixed-factor dividers. Add the other 8 gates to the clock tree between sys_pll1/2_bypass and the fixed dividers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25clk: imx8mm: Define gates for pll1/2 fixed dividersLeonard Crestez1-1/+18
On imx8mm there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2 each with their own gate. Only one of these gates (the one "dividing" by one) is currently defined and it's incorrectly set as the parent of all the fixed-factor dividers. Add the other 8 gates to the clock tree between sys_pll1/2_bypass and the fixed dividers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25clk: imx8mq: Define gates for pll1/2 fixed dividersLeonard Crestez1-1/+21
On imx8mq there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2 each with their own gate but these gates are not currently defined in the clock tree. Add them between sys1/2_pll_out and the fixed dividers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-14clk: imx8mq: Add VIDEO2_PLL clockLaurentiu Palcu1-1/+3
This clock is needed by DCSS when high resolutions are used. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com> CC: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-08dt-bindings: clk: axg-audio: add sm1 bindingsJerome Brunet1-0/+10
Add the compatible and clock ids of the sm1 audio clock controller Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-10-01dt-bindings: clk: Add r8a774b1 CPG Core Clock DefinitionsBiju Das1-0/+57
Add all RZ/G2N Clock Pulse Generator Core Clock Outputs, as listed in Table 8.2d ("List of Clocks [RZ/G2N]") of the RZ/G2N Hardware User's Manual. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Link: https://lore.kernel.org/r/1567666360-28035-1-git-send-email-biju.das@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-09-22Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds2-0/+21
Pull MIPS updates from Paul Burton: "Main MIPS changes: - boot_mem_map is removed, providing a nice cleanup made possible by the recent removal of bootmem. - Some fixes to atomics, in general providing compiler barriers for smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs or MIPS32 systems using cmpxchg64(). - Conversion to the new generic VDSO infrastructure courtesy of Vincenzo Frascino. - Removal of undefined behavior in set_io_port_base(), fixing the behavior of some MIPS kernel configurations when built with recent clang versions. - Initial MIPS32 huge page support, functional on at least Ingenic SoCs. - pte_special() is now supported for some configurations, allowing among other things generic fast GUP to be used. - Miscellaneous fixes & cleanups. And platform specific changes: - Major improvements to Ingenic SoC support from Paul Cercueil, mostly enabled by the inclusion of the new TCU (timer-counter unit) drivers he's spent a very patient year or so working on. Plus some fixes for X1000 SoCs from Zhou Yanjie. - Netgear R6200 v1 systems are now supported by the bcm47xx platform. - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems" * tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits) MIPS: Detect bad _PFN_SHIFT values MIPS: Disable pte_special() for MIPS32 with RiXi MIPS: ralink: deactivate PCI support for SOC_MT7621 mips: compat: vdso: Use legacy syscalls as fallback MIPS: Drop Loongson _CACHE_* definitions MIPS: tlbex: Remove cpu_has_local_ebase MIPS: tlbex: Simplify r3k check MIPS: Select R3k-style TLB in Kconfig MIPS: PCI: refactor ioc3 special handling mips: remove ioremap_cachable mips/atomic: Fix smp_mb__{before,after}_atomic() mips/atomic: Fix loongson_llsc_mb() wreckage mips/atomic: Fix cmpxchg64 barriers MIPS: Octeon: remove duplicated include from dma-octeon.c firmware: bcm47xx_nvram: Allow COMPILE_TEST firmware: bcm47xx_nvram: Correct size_t printf format MIPS: Treat Loongson Extensions as ASEs MIPS: Remove dev_err() usage after platform_get_irq() MIPS: dts: mscc: describe the PTP ready interrupt MIPS: dts: mscc: describe the PTP register range ...
2019-09-20Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+3
Pull ARM SoC late updates from Arnd Bergmann: "This is some material that we picked up into our tree late or that had complex inter-depondencies. The fact that there are these interdependencies tends to meant that these are often actually the most interesting new additions: - The new Aspeed AST2600 baseboard management controller is added, this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and had some dependencies on other device drivers. - After many years, support for the MMP2 based OLPC XO-1.75 finally makes it into the kernel. - The Armada 3720 based Turris Mox open source router platform is a late addition and it follows some preparatory work across multiple branches. - The OMAP2+ platform had some large-scale cleanup involving driver changes and DT changes, here we finish it off, dropping a lot of the now-unused platform data. - The TI K3 platform that got added for 5.3 gains a lot more support for individual bits on the SoC, this part just came late for the merge window" [ This pull request itself wasn't actually sent late at all by Arnd, but I waited on the branches that it used to be pulled first, so it ends up being merged much later than the other ARM SoC pull requests this merge window - Linus ] * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) ARM: dts: dir685: Drop spi-cpol from the display ARM: dts: aspeed: Add AST2600 pinmux nodes ARM: dts: aspeed: Add AST2600 and EVB ARM: exynos: Enable support for ARM architected timers ARM: samsung: Fix system restart on S3C6410 ARM: dts: mmp2: add OLPC XO 1.75 machine ARM: dts: mmp2: rename the USB PHY node ARM: dts: mmp2: specify reg-shift for the UARTs ARM: dts: mmp2: add camera interfaces ARM: dts: mmp2: fix the SPI nodes ARM: dts: mmp2: trivial whitespace fix arm64: dts: marvell: add DTS for Turris Mox dt-bindings: marvell: document Turris Mox compatible arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address arm64: dts: ti: k3-j721e-main: Add hwspinlock node arm64: dts: ti: k3-am65-main: Add hwspinlock node arm64: dts: k3-j721e: Add gpio-keys on common processor board dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E ...
2019-09-19Merge branches 'clk-cdce-regulator', 'clk-bcm', 'clk-evict-parent-cache' and 'clk-actions' into clk-nextStephen Boyd1-0/+2
- Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Evict parents from parent cache when they're unregistered * clk-cdce-regulator: clk: clk-cdce925: Add regulator support dt-bindings: clock: cdce925: Add regulator documentation * clk-bcm: clk: bcm2835: Mark PLLD_PER as CRITICAL clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support clk: bcm2835: Introduce SoC specific clock registration dt-bindings: bcm2835-cprman: Add bcm2711 support * clk-evict-parent-cache: clk: Evict unregistered clks from parent caches * clk-actions: clk: actions: Fix factor clk struct member access
2019-09-19Merge branches 'clk-renesas', 'clk-rockchip', 'clk-const' and 'clk-simplify' into clk-nextStephen Boyd1-0/+387
* clk-renesas: clk: renesas: cpg-mssr: Set GENPD_FLAG_ALWAYS_ON for clock domain clk: renesas: r9a06g032: Set GENPD_FLAG_ALWAYS_ON for clock domain clk: renesas: mstp: Set GENPD_FLAG_ALWAYS_ON for clock domain dt-bindings: clk: emev2: Rename bindings documentation file clk: renesas: rcar-usb2-clock-sel: Use devm_platform_ioremap_resource() helper * clk-rockchip: clk: rockchip: Add clock controller for the rk3308 clk: rockchip: Add dt-binding header for rk3308 dt-bindings: Add bindings for rk3308 clock controller clk: rockchip: Fix -Wunused-const-variable in rv1108 clk driver * clk-const: clk: spear: Make structure i2s_sclk_masks constant * clk-simplify: clk/ti: Use kmemdup rather than duplicating its implementation clk: fix devm_platform_ioremap_resource.cocci warnings
2019-09-19Merge branches 'clk-init-destroy', 'clk-doc', 'clk-imx' and 'clk-allwinner' into clk-nextStephen Boyd3-1/+225
- Set clk_init_data pointer inside clk_hw to NULL after registration * clk-init-destroy: clk: Overwrite clk_hw::init with NULL during clk_register() clk: sunxi: Don't call clk_hw_get_name() on a hw that isn't registered clk: ti: Don't reference clk_init_data after registration clk: qcom: Remove error prints from DFS registration rtc: sun6i: Don't reference clk_init_data after registration clk: zx296718: Don't reference clk_init_data after registration clk: milbeaut: Don't reference clk_init_data after registration clk: socfpga: deindent code to proper indentation phy: ti: am654-serdes: Don't reference clk_init_data after registration clk: sprd: Don't reference clk_init_data after registration clk: socfpga: Don't reference clk_init_data after registration clk: sirf: Don't reference clk_init_data after registration clk: qcom: Don't reference clk_init_data after registration clk: meson: axg-audio: Don't reference clk_init_data after registration clk: lochnagar: Don't reference clk_init_data after registration clk: actions: Don't reference clk_init_data after registration * clk-doc: clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h clk: Document of_parse_clkspec() some more clk: Remove extraneous 'for' word in comments * clk-imx: (32 commits) clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: imx: imx8mn: fix audio pll setting clk: imx8mn: Add necessary frequency support for ARM PLL table clk: imx8mn: Add missing rate_count assignment for each PLL structure clk: imx8mn: fix int pll clk gate clk: imx8mn: Add GIC clock clk: imx8mn: Fix incorrect parents clk: imx8mm: Fix incorrect parents clk: imx8mq: Fix sys3 pll references clk: imx8mq: Unregister clks when of_clk_add_provider failed clk: imx8mm: Unregister clks when of_clk_add_provider failed clk: imx8mq: Mark AHB clock as critical clk: imx8mn: Keep uart clocks on for early console clk: imx: Remove unused function statement clk: imx7ulp: Make sure earlycon's clock is enabled clk: imx8mm: Switch to platform driver clk: imx: imx8mm: fix audio pll setting ... * clk-allwinner: clk: sunxi-ng: h6: Allow I2S to change parent rate clk: sunxi-ng: v3s: add Allwinner V3 support clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks dt-bindings: clk: sunxi-ccu: add compatible string for V3 CCU clk: sunxi-ng: v3s: add the missing PLL_DDR1
2019-09-19Merge branches 'clk-qcom', 'clk-mtk', 'clk-armada', 'clk-ingenic' and 'clk-meson' into clk-nextStephen Boyd5-0/+692
- Support qcom SM8150 RPMh clks - Set floor ops for qcom sd clks - Support qcom QCS404 WCSS clks - Support for Mediatek MT6779 SoCs - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) * clk-qcom: clk: qcom: rcg: Return failure for RCG update clk: qcom: fix QCS404 TuringCC regmap clk: qcom: clk-rpmh: Add support for SM8150 dt-bindings: clock: Document SM8150 rpmh-clock compatible clk: qcom: clk-rpmh: Convert to parent data scheme dt-bindings: clock: Document the parent clocks clk: qcom: gcc: Use floor ops for SDCC clocks clk: qcom: gcc-qcs404: Use floor ops for sdcc clks clk: qcom: gcc-sdm845: Use floor ops for sdcc clks clk: qcom: define probe by index API as common API clk: qcom: Add WCSS gcc clock control for QCS404 clk: qcom: msm8916: Don't build by default clk: qcom: gcc: Add global clock controller driver for SM8150 dt-bindings: clock: Document gcc bindings for SM8150 clk: qcom: clk-alpha-pll: Add support for Trion PLLs clk: qcom: clk-alpha-pll: Remove post_div_table checks clk: qcom: clk-alpha-pll: Remove unnecessary cast * clk-mtk: clk: mediatek: Runtime PM support for MT8183 mcucfg clock provider clk: mediatek: Register clock gate with device clk: mediatek: add pericfg clocks for MT8183 dt-bindings: clock: mediatek: add pericfg for MT8183 clk: mediatek: Add MT6779 clock support clk: mediatek: Add dt-bindings for MT6779 clocks dt-bindings: mediatek: bindings for MT6779 clk clk: reset: Modify reset-controller driver * clk-armada: clk: mvebu: ap80x: add AP807 clock support clk: mvebu: ap806: Prepare the introduction of AP807 clock support clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver clk: mvebu: ap806: be more explicit on what SaR is clk: mvebu: ap80x-cpu: add AP807 CPU clock support clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock dt-bindings: ap806: Document AP807 clock compatible dt-bindings: ap80x: Document AP807 CPU clock compatible clk: mvebu: ap806: Fix clock name for the cluster clk: mvebu: add CPU clock driver for Armada 7K/8K clk: mvebu: add helper file for Armada AP and CP clocks dt-bindings: ap806: add the cluster clock node in the syscon file * clk-ingenic: clk: ingenic: Use CLK_OF_DECLARE_DRIVER macro clk: ingenic/jz4740: Fix "pll half" divider not read/written properly * clk-meson: (23 commits) clk: meson: g12a: add support for SM1 CPU 1, 2 & 3 clocks clk: meson: g12a: add support for SM1 DynamIQ Shared Unit clock clk: meson: g12a: add support for SM1 GP1 PLL dt-bindings: clk: meson: add sm1 periph clock controller bindings clk: meson: axg-audio: add g12a reset support dt-bindings: clock: meson: add resets to the audio clock controller clk: meson: g12a: expose CPUB clock ID for G12B clk: meson: g12a: add notifiers to handle cpu clock change clk: meson: add g12a cpu dynamic divider driver clk: core: introduce clk_hw_set_parent() clk: meson: remove clk input helper clk: meson: remove ee input bypass clocks clk: meson: clk-regmap: migrate to new parent description method clk: meson: meson8b: migrate to the new parent description method clk: meson: axg: migrate to the new parent description method clk: meson: gxbb: migrate to the new parent description method clk: meson: g12a: migrate to the new parent description method clk: meson: remove ao input bypass clocks clk: meson: axg-aoclk: migrate to the new parent description method clk: meson: gxbb-aoclk: migrate to the new parent description method ...
2019-09-17clk: mediatek: add pericfg clocks for MT8183Chunfeng Yun1-0/+4
Add pericfg clocks for MT8183, it's used when support USB remote wakeup Cc: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lkml.kernel.org/r/1566980533-28282-2-git-send-email-chunfeng.yun@mediatek.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17dt-bindings: bcm2835-cprman: Add bcm2711 supportStefan Wahren1-0/+2
The new BCM2711 supports an additional clock for the emmc2 block. So we need an additional compatible. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2019-09-12Merge branch 'aspeed/dt-3' into arm/lateArnd Bergmann1-0/+113
* aspeed/dt-3: ARM: dts: aspeed: Add AST2600 pinmux nodes ARM: dts: aspeed: Add AST2600 and EVB clk: Add support for AST2600 SoC clk: aspeed: Move structures to header clk: aspeed: Add SDIO gate
2019-09-09clk: mediatek: Add dt-bindings for MT6779 clocksmtk017611-0/+436
Add MT6779 clock dt-bindings, include topckgen, apmixedsys, infracfg, and subsystem clocks. Signed-off-by: mtk01761 <wendell.lin@mediatek.com> Link: https://lkml.kernel.org/r/1566206502-4347-10-git-send-email-mars.cheng@mediatek.com Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-06clk: Add support for AST2600 SoCJoel Stanley1-0/+113
The ast2600 is a new BMC SoC from ASPEED. It contains many more clocks than the previous iterations, so support is broken out into it's own driver. Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lkml.kernel.org/r/20190825141848.17346-3-joel@jms.id.au [sboyd@kernel.org: Mark arrays const] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-05clk: rockchip: Add dt-binding header for rk3308Finley Xiao1-0/+387
Add the dt-bindings header for the rk3308, that gets shared between the clock controller and the clock references in the dts. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-08-26clk: ti: add clkctrl data omap5 sgxTony Lindgren1-0/+3
Looks like we have sgx clock missing currently so let's add it. Cc: Adam Ford <aford173@gmail.com> Cc: Filip Matijević <filip.matijevic.pz@gmail.com> Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: moaz korena <moaz@korena.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: Philipp Rossak <embed3d@gmail.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-clk@vger.kernel.org Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26dt-bindings: clk: meson: add sm1 periph clock controller bindingsNeil Armstrong1-0/+5
Update the documentation to support clock driver for the Amlogic SM1 SoC and expose the GP1, DSU and the CPU 1, 2 & 3 clocks. SM1 clock tree is very close, the main differences are : - each CPU core can achieve a different frequency, albeit a common PLL - a similar tree as the clock tree has been added for the DynamIQ Shared Unit - has a new GP1 PLL used for the DynamIQ Shared Unit - SM1 has additional clocks like for CSI, NanoQ an other components Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-08-19clk: imx8mn: Add GIC clockLeonard Crestez1-1/+2
This is enabled by default but if it's not explicitly defined and marked as critical then its parent might get turned off. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-12clk: sunxi-ng: v3s: add Allwinner V3 supportIcenowy Zheng1-0/+4
Allwinner V3 has the same main die with V3s, but with more pins wired. There's a I2S bus on V3 that is not available on V3s. Add the V3-only peripheral's clocks and reset to the V3s CCU driver, bound to a new V3 compatible string. The driver name is not changed because it's part of the device tree binding (the header file name). Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-09clk: meson: g12a: expose CPUB clock ID for G12BNeil Armstrong1-0/+1
Expose the CPUB clock id to add DVFS to the second CPU cluster of the Amlogic G12B SoC. Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-08-08clk: jz4740: Add TCU clockPaul Cercueil1-0/+1
Add the missing TCU clock to the list of clocks supplied by the CGU for the JZ4740 SoC. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Tested-by: Artur Rojek <contact@artur-rojek.eu> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Lee Jones <lee.jones@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: od@zcrc.me
2019-08-08dt-bindings: ingenic: Add DT bindings for TCU clocksPaul Cercueil1-0/+20
This header provides clock numbers for the ingenic,tcu DT binding. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Tested-by: Artur Rojek <contact@artur-rojek.eu> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Lee Jones <lee.jones@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: od@zcrc.me
2019-08-08clk: qcom: Add WCSS gcc clock control for QCS404Govind Singh1-0/+3
Add support for the WCSS QDSP gcc clock control used on qcs404 based devices. This would allow wcss remoteproc driver to control the required gcc clocks to bring the subsystem out of reset. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-07dt-bindings: clock: Document gcc bindings for SM8150Deepak Katragadda1-0/+243
Document the global clock controller found on SM8150. Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> [vkoul: port to upstream and add external clocks split binding to this patch]] Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lkml.kernel.org/r/20190722074348.29582-5-vkoul@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-03clk: imx8: Add DSP related clocksDaniel Baluta1-1/+5
i.MX8QXP contains Hifi4 DSP. There are four clocks associated with DSP: * dsp_lpcg_core_clk * dsp_lpcg_ipg_clk * dsp_lpcg_adb_aclk * ocram_lpcg_ipg_clk Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03dt-bindings: imx: Add clock binding doc for i.MX8MNAnson Huang1-0/+215
Add the clock binding doc for i.MX8MN. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-17Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds12-4/+94
Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.