aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/blkdev.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-11-07block: add zone open, close and finish ioctl supportAjay Joshi1-5/+5
Introduce three new ioctl commands BLKOPENZONE, BLKCLOSEZONE and BLKFINISHZONE to allow applications to control the condition of zones on a zoned block device through the execution of the REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH operations. Contains contributions from Matias Bjorling, Hans Holmberg, Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig. Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com> Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com> Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07block: add zone open, close and finish operationsAjay Joshi1-2/+3
Zoned block devices (ZBC and ZAC devices) allow an explicit control over the condition (state) of zones. The operations allowed are: * Open a zone: Transition to open condition to indicate that a zone will actively be written * Close a zone: Transition to closed condition to release the drive resources used for writing to a zone * Finish a zone: Transition an open or closed zone to the full condition to prevent write operations To enable this control for in-kernel zoned block device users, define the new request operations REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH as well as the generic function blkdev_zone_mgmt() for submitting these operations on a range of zones. This results in blkdev_reset_zones() removal and replacement with this new zone magement function. Users of blkdev_reset_zones() (f2fs and dm-zoned) are updated accordingly. Contains contributions from Matias Bjorling, Hans Holmberg, Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig. Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com> Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com> Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-07block: Remove request_queue.nr_queuesBart Van Assche1-1/+0
Commit 897bb0c7f1ea ("blk-mq: Use proper cpumask iterator"; v4.6) removed the last use of request_queue.nr_queues from outside blk_mq_init_allocate_queue(). Remove this member variable to make struct request_queue smaller. This patch does not change any functionality. Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-24Merge tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+4
Pull more block updates from Jens Axboe: "Some later additions that weren't quite done for the first pull request, and also a few fixes that have arrived since. This contains: - Kill silly pktcdvd warning on attempting to register a non-scsi passthrough device (me) - Use symbolic constants for the block t10 protection types, and switch to handling it in core rather than in the drivers (Max) - libahci platform missing node put fix (Nishka) - Small series of fixes for BFQ (Paolo) - Fix possible nbd crash (Xiubo)" * tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block: block: drop device references in bsg_queue_rq() block: t10-pi: fix -Wswitch warning pktcdvd: remove warning on attempting to register non-passthrough dev ata: libahci_platform: Add of_node_put() before loop exit nbd: fix possible page fault for nbd disk nbd: rename the runtime flags as NBD_RT_ prefixed block, bfq: push up injection only after setting service time block, bfq: increase update frequency of inject limit block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1 block, bfq: update inject limit only after injection occurred block: centralize PI remapping logic to the block layer block: use symbolic constants for t10_pi type
2019-09-19Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-0/+2
Pull dma-mapping updates from Christoph Hellwig: - add dma-mapping and block layer helpers to take care of IOMMU merging for mmc plus subsequent fixups (Yoshihiro Shimoda) - rework handling of the pgprot bits for remapping (me) - take care of the dma direct infrastructure for swiotlb-xen (me) - improve the dma noncoherent remapping infrastructure (me) - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me) - cleanup mmaping of coherent DMA allocations (me) - various misc cleanups (Andy Shevchenko, me) * tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits) mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE mmc: queue: Fix bigger segments usage arm64: use asm-generic/dma-mapping.h swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page swiotlb-xen: simplify cache maintainance swiotlb-xen: use the same foreign page check everywhere swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable xen: remove the exports for xen_{create,destroy}_contiguous_region xen/arm: remove xen_dma_ops xen/arm: simplify dma_cache_maint xen/arm: use dev_is_dma_coherent xen/arm: consolidate page-coherent.h xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance arm: remove wrappers for the generic dma remap helpers dma-mapping: introduce a dma_common_find_pages helper dma-mapping: always use VM_DMA_COHERENT for generic DMA remap vmalloc: lift the arm flag for coherent mappings to common code dma-mapping: provide a better default ->get_required_mask dma-mapping: remove the dma_declare_coherent_memory export remoteproc: don't allow modular build ...
2019-09-17block: centralize PI remapping logic to the block layerMax Gurtovoy1-0/+4
Currently t10_pi_prepare/t10_pi_complete functions are called during the NVMe and SCSi layers command preparetion/completion, but their actual place should be the block layer since T10-PI is a general data integrity feature that is used by block storage protocols. Introduce .prepare_fn and .complete_fn callbacks within the integrity profile that each type can implement according to its needs. Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Suggested-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Fixed to not call queue integrity functions if BLK_DEV_INTEGRITY isn't defined in the config. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-15block: make rq sector size accessible for block statsHou Tao1-3/+12
Currently rq->data_len will be decreased by partial completion or zeroed by completion, so when blk_stat_add() is invoked, data_len will be zero and there will never be samples in poll_cb because blk_mq_poll_stats_bkt() will return -1 if data_len is zero. We could move blk_stat_add() back to __blk_mq_complete_request(), but that would make the effort of trying to call ktime_get_ns() once in vain. Instead we can reuse throtl_size field, and use it for both block stats and block throttle, and adjust the logic in blk_mq_poll_stats_bkt() accordingly. Fixes: 4bc6339a583c ("block: move blk_stat_add() to __blk_mq_end_request()") Tested-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-05block: Introduce elevator featuresDamien Le Moal1-0/+4
Introduce the definition of elevator features through the elevator_features flags in the elevator_type structure. Each flag can represent a feature supported by an elevator. The first feature defined by this patch is support for zoned block device sequential write constraint with the flag ELEVATOR_F_ZBD_SEQ_WRITE, which is implemented by the mq-deadline elevator using zone write locking. Other possible features are IO priorities, write hints, latency targets or single-LUN dual-actuator disks (for which the elevator could maintain one LBA ordered list per actuator). The required_elevator_features field is also added to the request_queue structure to allow a device driver to specify elevator feature flags that an elevator must support for the correct operation of the device (e.g. device drivers for zoned block devices can have the ELEVATOR_F_ZBD_SEQ_WRITE flag as a required feature). The helper function blk_queue_required_elevator_features() is defined for setting this new field. With these two new fields in place, the elevator functions elevator_match() and elevator_find() are modified to allow a user to set only an elevator with a set of features that satisfies the device required features. Elevators not matching the device requirements are not shown in the device sysfs queue/scheduler file to prevent their use. The "none" elevator can always be selected as before. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-03block: add a helper function to merge the segmentsYoshihiro Shimoda1-0/+2
This patch adds a helper function whether a queue can merge the segments by the DMA MAP layer (e.g. via IOMMU). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Simon Horman <horms+renesas@verge.net.au Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-08-28blk-mq: add optional request->alloc_time_nsTejun Heo1-1/+12
There are currently two start time timestamps - start_time_ns and io_start_time_ns. The former marks the request allocation and and the second issue-to-device time. The planned io.weight controller needs to measure the total time bios take to execute after it leaves rq_qos including the time spent waiting for request to become available, which can easily dominate on saturated devices. This patch adds request->alloc_time_ns which records when the request allocation attempt started. As it isn't used for the usual stats, make it optional behind CONFIG_BLK_RQ_ALLOC_TIME and QUEUE_FLAG_RQ_ALLOC_TIME so that it can be compiled out when there are no users and it's active only on queues which need it even when compiled in. v2: s/pre_start_time/alloc_time/ and add CONFIG_BLK_RQ_ALLOC_TIME gating as suggested by Jens. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27block: split .sysfs_lock into two locksMing Lei1-0/+1
The kernfs built-in lock of 'kn->count' is held in sysfs .show/.store path. Meantime, inside block's .show/.store callback, q->sysfs_lock is required. However, when mq & iosched kobjects are removed via blk_mq_unregister_dev() & elv_unregister_queue(), q->sysfs_lock is held too. This way causes AB-BA lock because the kernfs built-in lock of 'kn-count' is required inside kobject_del() too, see the lockdep warning[1]. On the other hand, it isn't necessary to acquire q->sysfs_lock for both blk_mq_unregister_dev() & elv_unregister_queue() because clearing REGISTERED flag prevents storing to 'queue/scheduler' from being happened. Also sysfs write(store) is exclusive, so no necessary to hold the lock for elv_unregister_queue() when it is called in switching elevator path. So split .sysfs_lock into two: one is still named as .sysfs_lock for covering sync .store, the other one is named as .sysfs_dir_lock for covering kobjects and related status change. sysfs itself can handle the race between add/remove kobjects and showing/storing attributes under kobjects. For switching scheduler via storing to 'queue/scheduler', we use the queue flag of QUEUE_FLAG_REGISTERED with .sysfs_lock for avoiding the race, then we can avoid to hold .sysfs_lock during removing/adding kobjects. [1] lockdep warning ====================================================== WARNING: possible circular locking dependency detected 5.3.0-rc3-00044-g73277fc75ea0 #1380 Not tainted ------------------------------------------------------ rmmod/777 is trying to acquire lock: 00000000ac50e981 (kn->count#202){++++}, at: kernfs_remove_by_name_ns+0x59/0x72 but task is already holding lock: 00000000fb16ae21 (&q->sysfs_lock){+.+.}, at: blk_unregister_queue+0x78/0x10b which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&q->sysfs_lock){+.+.}: __lock_acquire+0x95f/0xa2f lock_acquire+0x1b4/0x1e8 __mutex_lock+0x14a/0xa9b blk_mq_hw_sysfs_show+0x63/0xb6 sysfs_kf_seq_show+0x11f/0x196 seq_read+0x2cd/0x5f2 vfs_read+0xc7/0x18c ksys_read+0xc4/0x13e do_syscall_64+0xa7/0x295 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (kn->count#202){++++}: check_prev_add+0x5d2/0xc45 validate_chain+0xed3/0xf94 __lock_acquire+0x95f/0xa2f lock_acquire+0x1b4/0x1e8 __kernfs_remove+0x237/0x40b kernfs_remove_by_name_ns+0x59/0x72 remove_files+0x61/0x96 sysfs_remove_group+0x81/0xa4 sysfs_remove_groups+0x3b/0x44 kobject_del+0x44/0x94 blk_mq_unregister_dev+0x83/0xdd blk_unregister_queue+0xa0/0x10b del_gendisk+0x259/0x3fa null_del_dev+0x8b/0x1c3 [null_blk] null_exit+0x5c/0x95 [null_blk] __se_sys_delete_module+0x204/0x337 do_syscall_64+0xa7/0x295 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&q->sysfs_lock); lock(kn->count#202); lock(&q->sysfs_lock); lock(kn->count#202); *** DEADLOCK *** 2 locks held by rmmod/777: #0: 00000000e69bd9de (&lock){+.+.}, at: null_exit+0x2e/0x95 [null_blk] #1: 00000000fb16ae21 (&q->sysfs_lock){+.+.}, at: blk_unregister_queue+0x78/0x10b stack backtrace: CPU: 0 PID: 777 Comm: rmmod Not tainted 5.3.0-rc3-00044-g73277fc75ea0 #1380 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS ?-20180724_192412-buildhw-07.phx4 Call Trace: dump_stack+0x9a/0xe6 check_noncircular+0x207/0x251 ? print_circular_bug+0x32a/0x32a ? find_usage_backwards+0x84/0xb0 check_prev_add+0x5d2/0xc45 validate_chain+0xed3/0xf94 ? check_prev_add+0xc45/0xc45 ? mark_lock+0x11b/0x804 ? check_usage_forwards+0x1ca/0x1ca __lock_acquire+0x95f/0xa2f lock_acquire+0x1b4/0x1e8 ? kernfs_remove_by_name_ns+0x59/0x72 __kernfs_remove+0x237/0x40b ? kernfs_remove_by_name_ns+0x59/0x72 ? kernfs_next_descendant_post+0x7d/0x7d ? strlen+0x10/0x23 ? strcmp+0x22/0x44 kernfs_remove_by_name_ns+0x59/0x72 remove_files+0x61/0x96 sysfs_remove_group+0x81/0xa4 sysfs_remove_groups+0x3b/0x44 kobject_del+0x44/0x94 blk_mq_unregister_dev+0x83/0xdd blk_unregister_queue+0xa0/0x10b del_gendisk+0x259/0x3fa ? disk_events_poll_msecs_store+0x12b/0x12b ? check_flags+0x1ea/0x204 ? mark_held_locks+0x1f/0x7a null_del_dev+0x8b/0x1c3 [null_blk] null_exit+0x5c/0x95 [null_blk] __se_sys_delete_module+0x204/0x337 ? free_module+0x39f/0x39f ? blkcg_maybe_throttle_current+0x8a/0x718 ? rwlock_bug+0x62/0x62 ? __blkcg_punt_bio_submit+0xd0/0xd0 ? trace_hardirqs_on_thunk+0x1a/0x20 ? mark_held_locks+0x1f/0x7a ? do_syscall_64+0x4c/0x295 do_syscall_64+0xa7/0x295 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fb696cdbe6b Code: 73 01 c3 48 8b 0d 1d 20 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 008 RSP: 002b:00007ffec9588788 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000559e589137c0 RCX: 00007fb696cdbe6b RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559e58913828 RBP: 0000000000000000 R08: 00007ffec9587701 R09: 0000000000000000 R10: 00007fb696d4eae0 R11: 0000000000000206 R12: 00007ffec95889b0 R13: 00007ffec95896b3 R14: 0000559e58913260 R15: 0000559e589137c0 Cc: Christoph Hellwig <hch@infradead.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27block: add helper for checking if queue is registeredMing Lei1-0/+1
There are 4 users which check if queue is registered, so add one helper to check it. Cc: Christoph Hellwig <hch@infradead.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-19block: remove struct request_queue queue_headJunxiao Bi1-4/+0
The dispatch list is not used any more, as the legacy block IO stack has been removed. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04block: add req op to reset all zones and flagChaitanya Kulkarni1-0/+3
This patch introduces a new request operation REQ_OP_ZONE_RESET_ALL. This is useful for the applications like mkfs where it needs to reset all the zones present on the underlying block device. As part for this patch we also introduce new QUEUE_FLAG_ZONE_RESETALL which indicates the queue zone reset all capability and corresponding helper macro. Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04block: Declare several function pointer arguments 'const'Bart Van Assche1-16/+16
Make it clear to the compiler and also to humans that the functions that query request queue properties do not modify any member of the request_queue data structure. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-11block: Limit zone array allocation sizeDamien Le Moal1-0/+5
Limit the size of the struct blk_zone array used in blk_revalidate_disk_zones() to avoid memory allocation failures leading to disk revalidation failure. Also further reduce the likelyhood of such failures by using kvcalloc() (that is vmalloc()) instead of allocating contiguous pages with alloc_pages(). Fixes: 515ce6061312 ("scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation") Fixes: e76239a3748c ("block: add a report_zones method") Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-11block: Kill gfp_t argument of blkdev_report_zones()Damien Le Moal1-3/+2
Only GFP_KERNEL and GFP_NOIO are used with blkdev_report_zones(). In preparation of using vmalloc() for large report buffer and zone array allocations used by this function, remove its "gfp_t gfp_mask" argument and rely on the caller context to use memalloc_noio_save/restore() where necessary (block layer zone revalidation and dm-zoned I/O error path). Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10block: Fix potential overflow in blk_report_zones()Damien Le Moal1-2/+2
For large values of the number of zones reported and/or large zone sizes, the sector increment calculated with blk_queue_zone_sectors(q) * n in blk_report_zones() loop can overflow the unsigned int type used for the calculation as both "n" and blk_queue_zone_sectors() value are unsigned int. E.g. for a device with 256 MB zones (524288 sectors), overflow happens with 8192 or more zones reported. Changing the return type of blk_queue_zone_sectors() to sector_t, fixes this problem and avoids overflow problem for all other callers of this helper too. The same change is also applied to the bdev_zone_sectors() helper. Fixes: e76239a3748c ("block: add a report_zones method") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: add centralize REQ_OP_XXX to string helperChaitanya Kulkarni1-0/+3
In order to centralize the REQ_OP_XXX to string conversion which can be used in the block layer and different places in the kernel like f2fs, this patch adds a new helper function along with an array similar to the one present in the blk-mq-debugfs.c. We keep this helper functionality centralize under blk-core.c instead of blk-mq-debugfs.c since blk-core.c is configured using CONFIG_BLOCK and it will not be dependent on blk-mq-debugfs.c which is configured using CONFIG_BLK_DEBUG_FS. Next patch adjusts the code in the blk-mq-debugfs.c with newly introduced helper. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: remove the bi_phys_segments field in struct bioChristoph Hellwig1-1/+0
We only need the number of segments in the blk-mq submission path. Remove the field from struct bio, and return it from a variant of blk_queue_split instead of that it can passed as an argument to those functions that need the value. This also means we stop recounting segments except for cloning and partial segments. To keep the number of arguments in this how path down remove pointless struct request_queue arguments from any of the functions that had it and grew a nr_segs argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: remove blk_init_request_from_bioChristoph Hellwig1-1/+0
lightnvm should have never used this function, as it is sending passthrough requests, so switch it to blk_rq_append_bio like all the other passthrough request users. Inline blk_init_request_from_bio into the only remaining caller. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20blk-core: Remove blk_end_request*() declarationsPavel Begunkov1-12/+0
Commit a1ce35fa49852db60fc6e268 ("block: remove dead elevator code") deleted blk_end_request() and friends, but some declaration are still left. Purge them. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20block: move tag field position in struct requestMinwoo Im1-1/+1
__data_len and __sector are internal fields which should not be accessed directly in driver-level like the comment above it. But, tag field can be accessed by driver level directly so that we need to make the comment right by moving it to some other place. Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-23blk-mq: fix hang caused by freeze/unfreeze sequenceBob Liu1-1/+6
The following is a description of a hang in blk_mq_freeze_queue_wait(). The hang happens on attempt to freeze a queue while another task does queue unfreeze. The root cause is an incorrect sequence of percpu_ref_resurrect() and percpu_ref_kill() and as a result those two can be swapped: CPU#0 CPU#1 ---------------- ----------------- q1 = blk_mq_init_queue(shared_tags) q2 = blk_mq_init_queue(shared_tags): blk_mq_add_queue_tag_set(shared_tags): blk_mq_update_tag_set_depth(shared_tags): list_for_each_entry() blk_mq_freeze_queue(q1) > percpu_ref_kill() > blk_mq_freeze_queue_wait() blk_cleanup_queue(q1) blk_mq_freeze_queue(q1) > percpu_ref_kill() ^^^^^^ freeze_depth can't guarantee the order blk_mq_unfreeze_queue() > percpu_ref_resurrect() > blk_mq_freeze_queue_wait() ^^^^^^ Hang here!!!! This wrong sequence raises kernel warning: percpu_ref_kill_and_confirm called more than once on blk_queue_usage_counter_release! WARNING: CPU: 0 PID: 11854 at lib/percpu-refcount.c:336 percpu_ref_kill_and_confirm+0x99/0xb0 But the most unpleasant effect is a hang of a blk_mq_freeze_queue_wait(), which waits for a zero of a q_usage_counter, which never happens because percpu-ref was reinited (instead of being killed) and stays in PERCPU state forever. How to reproduce: - "insmod null_blk.ko shared_tags=1 nr_devices=0 queue_mode=2" - cpu0: python Script.py 0; taskset the corresponding process running on cpu0 - cpu1: python Script.py 1; taskset the corresponding process running on cpu1 Script.py: ------ #!/usr/bin/python3 import os import sys while True: on = "echo 1 > /sys/kernel/config/nullb/%s/power" % sys.argv[1] off = "echo 0 > /sys/kernel/config/nullb/%s/power" % sys.argv[1] os.system(on) os.system(off) ------ This bug was first reported and fixed by Roman, previous discussion: [1] Message id: 1443287365-4244-7-git-send-email-akinobu.mita@gmail.com [2] Message id: 1443563240-29306-6-git-send-email-tj@kernel.org [3] https://patchwork.kernel.org/patch/9268199/ Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com> Signed-off-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04blk-mq: always free hctx after request queue is freedMing Lei1-0/+7
In normal queue cleanup path, hctx is released after request queue is freed, see blk_mq_release(). However, in __blk_mq_update_nr_hw_queues(), hctx may be freed because of hw queues shrinking. This way is easy to cause use-after-free, because: one implicit rule is that it is safe to call almost all block layer APIs if the request queue is alive; and one hctx may be retrieved by one API, then the hctx can be freed by blk_mq_update_nr_hw_queues(); finally use-after-free is triggered. Fixes this issue by always freeing hctx after releasing request queue. If some hctxs are removed in blk_mq_update_nr_hw_queues(), introduce a per-queue list to hold them, then try to resuse these hctxs if numa node is matched. Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen <martin.petersen@oracle.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>, Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30block: remove the unused blk_queue_dma_pad functionChristoph Hellwig1-1/+0
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-22Merge tag 'v5.1-rc6' into for-5.2/blockJens Axboe1-1/+0
Pull in v5.1-rc6 to resolve two conflicts. One is in BFQ, in just a comment, and is trivial. The other one is a conflict due to a later fix in the bio multi-page work, and needs a bit more care. * tag 'v5.1-rc6': (770 commits) Linux 5.1-rc6 block: make sure that bvec length can't be overflow block: kill all_q_node in request_queue x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping mm/kmemleak.c: fix unused-function warning init: initialize jump labels before command line option parsing kernel/watchdog_hld.c: hard lockup message should end with a newline kcov: improve CONFIG_ARCH_HAS_KCOV help text mm: fix inactive list balancing between NUMA nodes and cgroups mm/hotplug: treat CMA pages as unmovable proc: fixup proc-pid-vm test proc: fix map_files test on F29 mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock mm: swapoff: shmem_unuse() stop eviction without igrab() mm: swapoff: take notice of completion sooner mm: swapoff: remove too limiting SWAP_UNUSE_MAX_TRIES mm: swapoff: shmem_find_swap_entries() filter out other types slab: store tagged freelist for off-slab slabmgmt ... Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-19block: kill all_q_node in request_queueHou Tao1-1/+0
all_q_node has not been used since commit 4b855ad37194 ("blk-mq: Create hctx for each present CPU"), so remove it. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-05block: add dma_map_bvec helperChristoph Hellwig1-0/+4
Provide a nice little shortcut for mapping a single bvec. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
2019-04-05block: add a rq_dma_dir helperChristoph Hellwig1-0/+3
In a lot of places we want to know the DMA direction for a given struct request. Add a little helper to make it a littler easier. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
2019-04-05block: add a rq_integrity_vec helperChristoph Hellwig1-0/+16
This provides a nice little shortcut to get the integrity data for drivers like NVMe that only support a single integrity segment. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
2019-04-05block: add a req_bvec helperChristoph Hellwig1-0/+11
Return the currently active bvec segment, potentially spanning multiple pages. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
2019-03-20block: add BLK_MQ_POLL_CLASSIC for hybrid poll and return EINVAL for unexpected valueYufen Yu1-0/+3
For q->poll_nsec == -1, means doing classic poll, not hybrid poll. We introduce a new flag BLK_MQ_POLL_CLASSIC to replace -1, which may make code much easier to read. Additionally, since val is an int obtained with kstrtoint(), val can be a negative value other than -1, so return -EINVAL for that case. Thanks to Damien Le Moal for some good suggestion. Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-09Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-8/+0
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ...
2019-02-15block: kill QUEUE_FLAG_NO_SG_MERGEMing Lei1-1/+0
Since bdced438acd83ad83a6c ("block: setup bi_phys_segments after splitting"), physical segment number is mainly figured out in blk_queue_split() for fast path, and the flag of BIO_SEG_VALID is set there too. Now only blk_recount_segments() and blk_recalc_rq_segments() use this flag. Basically blk_recount_segments() is bypassed in fast path given BIO_SEG_VALID is set in blk_queue_split(). For another user of blk_recalc_rq_segments(): - run in partial completion branch of blk_update_request, which is an unusual case - run in blk_cloned_rq_check_limits(), still not a big problem if the flag is killed since dm-rq is the only user. Multi-page bvec is enabled now, not doing S/G merging is rather pointless with the current setup of the I/O path, as it isn't going to save you a significant amount of cycles. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-15block: introduce bio_for_each_bvec() and rq_for_each_bvec()Ming Lei1-0/+4
bio_for_each_bvec() is used for iterating over multi-page bvec for bio split & merge code. rq_for_each_bvec() can be used for drivers which may handle the multi-page bvec directly, so far loop is one perfect use case. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-09block: queue flag cleanupJens Axboe1-31/+27
We have QUEUE_FLAG_DEFAULT defined, but it's not used anymore since the legacy IO stack is gone. Kill it. Sanitize the queue flags in general, they use spaces (for some reason), and the space is pretty sparse. With the flags renumbered, we can more clearly see how many we have available. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-09block: kill QUEUE_FLAG_FLUSH_NQJens Axboe1-7/+0
We have various helpers for setting/clearing this flag, and also a helper to check if the queue supports queueable flushes or not. But nobody uses them anymore, kill it with fire. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-05scsi: block: remove bidi supportChristoph Hellwig1-6/+0
Unused now, and another field in struct request bites the dust. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-05scsi: block: remove req->specialChristoph Hellwig1-2/+0
No users left. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-6/+0
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: smarpqi, lpfc, qedi, megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have a pile of annotation, unused variable and minor updates. The big API change is the updates for Christoph's DMA rework which include removing the DISABLE_CLUSTERING flag. And finally there are a couple of target tree updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits) scsi: isci: request: mark expected switch fall-through scsi: isci: remote_node_context: mark expected switch fall-throughs scsi: isci: remote_device: Mark expected switch fall-throughs scsi: isci: phy: Mark expected switch fall-through scsi: iscsi: Capture iscsi debug messages using tracepoints scsi: myrb: Mark expected switch fall-throughs scsi: megaraid: fix out-of-bound array accesses scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through scsi: fcoe: remove set but not used variable 'port' scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown() scsi: smartpqi: fix build warnings scsi: smartpqi: update driver version scsi: smartpqi: add ofa support scsi: smartpqi: increase fw status register read timeout scsi: smartpqi: bump driver version scsi: smartpqi: add smp_utils support scsi: smartpqi: correct lun reset issues scsi: smartpqi: correct volume status scsi: smartpqi: do not offline disks for transient did no connect conditions scsi: smartpqi: allow for larger raid maps ...
2018-12-18scsi: block: remove the cluster flagChristoph Hellwig1-6/+0
Now that the the SCSI layer replaced the use of the cluster flag with segment size limits and the DMA boundary we can remove the cluster flag from the block layer. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-16blk-mq-debugfs: support rq_qosMing Lei1-0/+1
blk-mq-debugfs has been proved as very helpful for debug some tough issues, such as IO hang. We have seen blk-wbt related IO hang several times, even inside Red Hat BZ, there is such report not sovled yet, so this patch adds support debugfs on rq_qos. Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07blk-mq: remove QUEUE_FLAG_POLL from default MQ flagsJens Axboe1-2/+1
We only support polling if we have poll queues now, but the flag is being set by default. Remove the default QUEUE_FLAG_POLL setting, we'll set it in blk_mq_init_allocated_queue() if we have poll queues available for this device. Fixes: 6544d229bf43 ("block: enable polling by default if a poll map is initalized") Reported-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04block: remove ->poll_fnChristoph Hellwig1-2/+0
This was intended to support users like nvme multipath, but is just getting in the way and adding another indirect call. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-29block: improve logic around when to sort a plug listJens Axboe1-0/+1
Only do it if we have requests for multiple queues in the same plug. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-26block: sum requests in the plug structureJens Axboe1-0/+1
This isn't exactly the same as the previous count, as it includes requests for all devices. But that really doesn't matter, if we have more than the threshold (16) queued up, flush it. It's not worth it to have an expensive list loop for this. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-26block: make blk_poll() take a parameter on whether to spin or notJens Axboe1-2/+2
blk_poll() has always kept spinning until it found an IO. This is fine for SYNC polling, since we need to find one request we have pending, but in preparation for ASYNC polling it can be beneficial to just check if we have any entries available or not. Existing callers are converted to pass in 'spin == true', to retain the old behavior. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-26blk-mq: when polling for IO, look for any completionJens Axboe1-1/+1
If we want to support async IO polling, then we have to allow finding completions that aren't just for the one we are looking for. Always pass in -1 to the mq_ops->poll() helper, and have that return how many events were found in this poll loop. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-21blk-mq: not embed .mq_kobj and ctx->kobj into queue instanceMing Lei1-1/+1
Even though .mq_kobj, ctx->kobj and q->kobj share same lifetime from block layer's view, actually they don't because userspace may grab one kobject anytime via sysfs. This patch fixes the issue by the following approach: 1) introduce 'struct blk_mq_ctxs' for holding .mq_kobj and managing all ctxs 2) free all allocated ctxs and the 'blk_mq_ctxs' instance in release handler of .mq_kobj 3) grab one ref of .mq_kobj before initializing each ctx->kobj, so that .mq_kobj is always released after all ctxs are freed. This patch fixes kernel panic issue during booting when DEBUG_KOBJECT_RELEASE is enabled. Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.