linux-dev - Linux kernel development work

Age	Commit message (Collapse)	Author	Files	Lines
2016-02-17	clk: at91: pmc: drop at91_pmc_base	Alexandre Belloni	1	-12/+0
	at91_pmc_base is not used anymore, remove it along with at91_pmc_read and at91_pmc_write. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01	clk: at91: add generated clock driver	Nicolas Ferre	1	-0/+7
	Add a new type of clocks that can be provided to a peripheral. In addition to the peripheral clock, this new clock that can use several input clocks as parents can generate divided rates. This would allow a peripheral to have finer grained clocks for generating a baud rate, clocking an asynchronous part or having more options in frequency. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [sboyd@codeaurora.org: Transition to new clk_hw provider APIs] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01	clk: at91: add PMC sama5d2 support	Nicolas Ferre	1	-0/+1
	Add support for the new sama5d2 SoC and adapt capabilities. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01	clk: at91: cleanup PMC header file for PCR register fields	Nicolas Ferre	1	-8/+6
	Add _MASK and _OFFSET values and cleanup register fields layout. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-11	clk: at91: change to using endian agnositc IO	Ben Dooks	1	-2/+2
	Change to using endian agnostic _relaxed IO accessors instead of __raw Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> -- CC: Andrew Victor <linux@maxim.org.za> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> CC: Mike Turquette <mturquette@linaro.org> (maintainer:COMMON CLK FRAMEWORK) CC: Stephen Boyd <sboyd@codeaurora.org> (maintainer:COMMON CLK FRAMEWORK) CC: linux-kernel@vger.kernel.org (open list:COMMON CLK FRAMEWORK) Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-09-22	clk: at91: add a driver for the h32mx clock	Alexandre Belloni	1	-0/+1
	Newer SoCs have two different AHB interconnect. The AHB 32 bits Matrix interconnect (h32mx) has a clock that can be setup at the half of the h64mx clock (which is mck). The h32mx clock can not exceed 90 MHz. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07	clk: at91: add slow clks driver	Boris BREZILLON	1	-0/+1
	AT91 slow clk is a clk multiplexer. In some SoCs (sam9x5, sama5, sam9g45 families) this multiplexer can choose among 2 sources: an internal RC oscillator circuit and an oscillator using an external crystal. In other Socs (sam9260 family) the multiplexer source is hardcoded with the OSCSEL signal. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02	clk: at91: add PMC pll clocks	Boris BREZILLON	1	-0/+2
	This patch adds new at91 pll clock implementation using common clk framework. The pll clock layout describe the PLLX register layout. There are four pll clock layouts: - at91rm9200 - at91sam9g20 - at91sam9g45 - sama5d3 PLL clocks are given characteristics: - min/max clock source rate - ranges of valid clock output rates - values to set in out and icpll fields for each supported output range These characteristics are checked during rate change to avoid over/underclocking. These characteristics are described in atmel's SoC datasheet in "Electrical Characteristics" paragraph. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02	ARM: at91: move at91_pmc.h to include/linux/clk/at91_pmc.h	Boris BREZILLON	1	-0/+190
	This patch moves at91_pmc.h header from machine specific directory (arch/arm/mach-at91/include/mach/at91_pmc.h) to clk include directory (include/linux/clk/at91_pmc.h). We need this to avoid reference to machine specific headers in clk drivers. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>