aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/clk/tegra.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-10-05clk: tegra: Add stubs needed for compile testingThierry Reding1-1/+23
These stubs are needed to allow the tegra-cpuidle driver to be compile-tested. Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-01clk: tegra: Add stubs needed for compile-testingDmitry Osipenko1-21/+79
Add stubs needed for compile-testing of Tegra memory drivers. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-24clk: tegra: Add PLLE HW power sequencer controlJC Kuo1-1/+3
PLLE has a hardware power sequencer logic which is a state machine that can power on/off PLLE without any software intervention. The sequencer has two inputs, one from XUSB UPHY PLL and the other from SATA UPHY PLL. PLLE provides reference clock to XUSB and SATA UPHY PLLs. When both of the downstream PLLs are powered-off, PLLE hardware power sequencer will automatically power off PLLE for power saving. XUSB and SATA UPHY PLLs also have their own hardware power sequencer logic. XUSB UPHY PLL is shared between XUSB SuperSpeed ports and PCIE controllers. The XUSB UPHY PLL hardware power sequencer has inputs from XUSB and PCIE. When all of the XUSB SuperSpeed ports and PCIE controllers are in low power state, XUSB UPHY PLL hardware power sequencer automatically power off PLL and flags idle to PLLE hardware power sequencer. Similar applies to SATA UPHY PLL. PLLE hardware power sequencer has to be enabled after both downstream sequencers are enabled. This commit adds two helper functions: 1. tegra210_plle_hw_sequence_start() for XUSB PADCTL driver to enable PLLE hardware sequencer at proper time. 2. tegra210_plle_hw_sequence_is_enabled() for XUSB PADCTL driver to check whether PLLE hardware sequencer has been enabled or not. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-01-05memory: tegra124-emc: Make driver modularDmitry Osipenko1-0/+8
Add modularization support to the Tegra124 EMC driver, which now can be compiled as a loadable kernel module. Note that EMC clock must be registered at clk-init time, otherwise PLLM will be disabled as unused clock at boot time if EMC driver is compiled as a module. Hence add a prepare/complete callbacks. similarly to what is done for the Tegra20/30 EMC drivers. Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201228154920.18846-2-digetx@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-05-12clk: tegra: Implement Tegra210 EMC clockJoseph Lo1-0/+24
The EMC clock needs to carefully coordinate with the EMC controller programming to make sure external memory can be properly clocked. Do so by hooking up the EMC clock with an EMC provider that will specify which rates are supported by the EMC and provide a callback to use for setting the clock rate at the EMC. Based on work by Peter De Schrijver <pdeschrijver@nvidia.com>. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12clk: tegra: Export functions for EMC clock scalingJoseph Lo1-0/+3
Export functions to allow accessing the CAR register required by EMC clock scaling. These functions will be used to access the CAR register as part of the scaling sequence. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEPDmitry Osipenko1-0/+13
The new CPUIDLE driver uses the Tegra's CLK API and that driver won't strictly depend on CONFIG_PM_SLEEP, hence add the required stubs in order to allow compiling of the new driver with the CONFIG_PM_SLEEP=n. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Add Tegra20/30 EMC clock implementationDmitry Osipenko1-0/+11
A proper External Memory Controller clock rounding and parent selection functionality is required by the EMC drivers, it is not available using the generic clock implementation because only the Memory Controller driver is aware of what clock rates are actually available for a particular device. EMC drivers will have to register a Tegra-specific CLK-API callback which will perform rounding of a requested rate. EMC clock users won't be able to request EMC clock by getting -EPROBE_DEFER until EMC driver is probed and the callback is set up. The functionality is somewhat similar to the clk-emc.c which serves Tegra124+ SoCs. The later HW generations support more parent clock sources and the HW configuration / integration with the EMC drivers differs a tad from the older gens, hence it's not really worth to try to squash everything into a single source file. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-08clk: tegra: MBIST work around for Tegra210Peter De Schrijver1-0/+1
Tegra210 has a hw bug which can cause IP blocks to lock up when ungating a domain. The reason is that the logic responsible for resetting the memory built-in self test mode can come up in an undefined state because its clock is gated by a second level clock gate (SLCG). Work around this by making sure the logic will get some clock edges by ensuring the relevant clock is enabled and temporarily override the relevant SLCGs. Unfortunately for some IP blocks, the control bits for overriding the SLCGs are not in CAR, but in the IP block itself. This means we need to map a few extra register banks in the clock code. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Hector Martin <marcan@marcan.st> Tested-by: Andre Heider <a.heider@gmail.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> fixup mbist
2017-03-20clk: tegra: Add SATA seq input controlPeter De Schrijver1-0/+1
This will be used by the powergating driver to ensure proper sequencer state when the SATA domain is powergated. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-03-20clk: tegra: Handle UTMIPLL IDDQPeter De Schrijver1-0/+2
Export UTMIPLL IDDQ functions. These will be needed when powergating the XUSB partition. Signed-off-by: BH Hsieh <bhsieh@nvidia.com> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-28clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLsAndrew Bresticker1-0/+5
On Tegra210, hardware control of the SATA and XUSB pad PLLs must be done during the UPHY enable sequence rather than the PLLE enable sequence. Export functions to do this so that hardware control can be enabled from the XUSB padctl driver. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-20clk: tegra: Properly include clk.hStephen Boyd1-1/+2
Clock provider drivers generally shouldn't include clk.h because it's the consumer API. Only include clk.h in files that are using it. Also add in a clkdev.h include that was missing in a file using clkdev APIs. Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-02-02clk: tegra: make tegra_clocks_apply_init_table() arch_initcallPeter De Schrijver1-2/+0
tegra_clocks_apply_init_table() needs to be called after the udelay loop has been calibrated (see commit 441f199a37cfd66c5dd8dd45490bd3ea6971117d ("clk: tegra: defer application of init table") for why that is). On existing Tegra SoCs this was done by calling tegra_clocks_apply_init_table() from tegra_dt_init(). To make this also work on ARM64, we need to change this into an initcall. tegra_dt_init() is called from customize_machine which is an arch_initcall. Therefore this should also work on existing 32bit Tegra SoCs. Tested on Tegra20 (ventana), Tegra30 (beaverboard), Tegra124 (jetson TK1) and Tegra132. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> [paul@pwsan.com: tweaked the commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com>
2013-12-11clk: tegra: remove legacy reset APIsStephen Warren1-7/+0
Now that no code uses the custom Tegra module reset API, we can remove its implementation. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-06-24clk: tegra: fix ifdef for tegra_periph_reset_assert inlineStephen Warren1-1/+1
Commit 7064f6b "clk: tegra: provide tegra_periph_reset_assert alternative" added ifdef'd static inline versions of some functions, but tested ARCH_TEGRA rather than CONFIG_ARCH_TEGRA, thus disabling these function in all cases. In some cases, this caused HW modules to misbehave; for example, the Tegra I2C driver BUG()d during boot on Seaboard. Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Paul Walmsley <pwalmsley@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-22clk: tegra: provide tegra_periph_reset_assert alternativeArnd Bergmann1-0/+5
We have some tegra device drivers that are written to be platform independent but still use the tegra specific tegra_periph_reset_assert function. In order to build and link them without errors, this provides a static inline version of these functions that does nothing when Tegra support is disabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: fixed up trivial merge issue]
2013-05-31clk: tegra: Use common of_clk_init functionPrashant Gaikwad1-1/+0
Use common of_clk_init() function for clocks initialization. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-04-04clk: tegra: defer application of init tableStephen Warren1-0/+1
The Tegra clock driver is initialized during the ARM machine descriptor's .init_irq() hook. It can't be initialized earlier, since dynamic memory usage is required. It can't be initialized later, since the .init_timer() hook needs the clocks initialized. However, at this time, udelay() doesn't work. The Tegra clock initialization table may enable some PLLs. Enabling a PLL may require usage of udelay(). Hence, this can't happen right when the clock driver is initialized. To solve this, separate the clock driver initialization from the clock table processing, so they can execute at separate times. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28ARM: tegra: remove legacy clock codePrashant Gaikwad1-2/+0
Remove all legacy clock code from mach-tegra. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28ARM: tegra: migrate to new clock codePrashant Gaikwad1-0/+5
Migrate Tegra clock support to drivers/clk/tegra, this involves moving: 1. definition of tegra_cpu_car_ops to clk.c 2. definition of reset functions to clk-peripheral.c 3. change parent of cpu clock. 4. Remove legacy clock initialization. 5. Initialize clocks using DT. 6. Remove all instance of mach/clk.h Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: use to_clk_periph_gate().] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28ARM: tegra: move tegra_cpu_car.h to linux/clk/tegra.hPrashant Gaikwad1-0/+124
tegra_cpu_car_ops struct is going to be accessed from drivers/clk/tegra. Move the tegra_cpu_car_ops to include/linux/clk/tegra.h. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.