aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/elfcore-compat.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-01-06[amd64] clean PRSTATUS_SIZE/SET_PR_FPVALID up properlyAl Viro1-7/+11
To get rid of hardcoded size/offset in those macros we need to have a definition of i386 variant of struct elf_prstatus. However, we can't do that in asm/compat.h - the types needed for that are not there and adding an include of asm/user32.h into asm/compat.h would cause a lot of mess. That could be conveniently done in elfcore-compat.h, but currently there is nowhere to put arch-dependent parts of it - no asm/elfcore-compat.h. So we introduce a new file (asm/elfcore-compat.h, present on architectures that have CONFIG_ARCH_HAS_ELFCORE_COMPAT set, currently only on x86), have it pulled by linux/elfcore-compat.h and move the definitions there. As a side benefit, we don't need to worry about accidental inclusion of that file into binfmt_elf.c itself, so we don't need the dance with COMPAT_PRSTATUS_SIZE, etc. - only fs/compat_binfmt_elf.c will see that header. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-06elf_prstatus: collect the common part (everything before pr_reg) into a structAl Viro1-1/+6
Preparations to doing i386 compat elf_prstatus sanely - rather than duplicating the beginning of compat_elf_prstatus, take these fields into a separate structure (compat_elf_prstatus_common), so that it could be reused. Due to the incestous relationship between binfmt_elf.c and compat_binfmt_elf.c we need the same shape change done to native struct elf_prstatus, gathering the fields prior to pr_reg into a new structure (struct elf_prstatus_common). Fortunately, offset of pr_reg is always a multiple of 16 with no padding right before it, so it's possible to turn all the stuff prior to it into a single member without disturbing the layout. [build fix from Geert Uytterhoeven folded in] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-07-27take fdpic-related parts of elf_prstatus outAl Viro1-4/+0
The only architecture where we might end up using both is arm, and there we definitely don't want fdpic-related fields in elf_prstatus - coredump layout of ELF binaries should not depend upon having the kernel built with the support of ELF_FDPIC ones. Just move the fdpic-modified variant into binfmt_elf_fdpic.c (and call it elf_prstatus_fdpic there) [name stolen from nico] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-08-27y2038: globally rename compat_time to old_time32Arnd Bergmann1-4/+4
Christoph Hellwig suggested a slightly different path for handling backwards compatibility with the 32-bit time_t based system calls: Rather than simply reusing the compat_sys_* entry points on 32-bit architectures unchanged, we get rid of those entry points and the compat_time types by renaming them to something that makes more sense on 32-bit architectures (which don't have a compat mode otherwise), and then share the entry points under the new name with the 64-bit architectures that use them for implementing the compatibility. The following types and interfaces are renamed here, and moved from linux/compat_time.h to linux/time32.h: old new --- --- compat_time_t old_time32_t struct compat_timeval struct old_timeval32 struct compat_timespec struct old_timespec32 struct compat_itimerspec struct old_itimerspec32 ns_to_compat_timeval() ns_to_old_timeval32() get_compat_itimerspec64() get_old_itimerspec32() put_compat_itimerspec64() put_old_itimerspec32() compat_get_timespec64() get_old_timespec32() compat_put_timespec64() put_old_timespec32() As we already have aliases in place, this patch addresses only the instances that are relevant to the system call interface in particular, not those that occur in device drivers and other modules. Those will get handled separately, while providing the 64-bit version of the respective interfaces. I'm not renaming the timex, rusage and itimerval structures, as we are still debating what the new interface will look like, and whether we will need a replacement at all. This also doesn't change the names of the syscall entry points, which can be done more easily when we actually switch over the 32-bit architectures to use them, at that point we need to change COMPAT_SYSCALL_DEFINEx to SYSCALL_DEFINEx with a new name, e.g. with a _time32 suffix. Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/lkml/20180705222110.GA5698@infradead.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2008-02-29elfcore-compat fix uid/gid typesRoland McGrath1-2/+2
I overlooked the difference between __kernel_uid_t and uid_t when defining struct compat_elf_prpsinfo. The result is a regression in 32-bit core dumps on x86_64, where the NT_PRPSINFO note has the wrong size and layout. This patch fixes it. Signed-off-by: Roland McGrath <roland@redhat.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Add linux/elfcore-compat.hRoland McGrath1-0/+55
This adds the linux/elfcore-compat.h header file, which is the CONFIG_COMPAT analog of the linux/elfcore.h header. Each arch that needs to fake out fs/binfmt_elf.c for its compat code can use this header to replace the hand-copied definitions of the compat variants of struct elf_prstatus et al. Only the pr_reg field varies by arch, so asm/{compat,elf}.h must define compat_elf_gregset_t before linux/elfcore-compat.h can be used. It's a clean-up that every arch with compat core dumping code can benefit from. I only touched the ones I have handy to test at home. Doing the same for each other arch should be straightforward, and I'm happy to offer tips. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>