aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/ide.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2008-01-25ide: make 'extra' field in struct ide_port_info u8Bartlomiej Zolnierkiewicz1-1/+1
The maximum value used currently for 'extra' field in struct ide_port_info is 240. Make 'extra' u8 so it packs nicely together with enablebits[] and 'chipset' fields (ide_pci_enablebit_t is 3 bytes and hwif_chipset_t is 1 byte). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide-disk: use ide_get_lba_addr()Bartlomiej Zolnierkiewicz1-0/+1
* Export ide_get_lba_addr(). * Convert idedisk_{read_native,set}_max_address() to use ide_get_lba_addr(). * Remove incorrect comment from idedisk_read_native_max_address() (noticed by Sergei). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: add ide_tf_read() helperBartlomiej Zolnierkiewicz1-2/+22
* Factor out code reading taskfile registers from ide_end_drive_cmd() to the new ide_tf_read() helper. * Add IDE_TFLAG_IN_* taskfile flags to indicate the need to load particular IDE taskfile register in ide_tf_read(). * Update ide_end_drive_cmd() to set respective IDE_TFLAG_IN_* taksfile flags. * Add ide_get_lba_addr() for getting LBA sector address from taskfile struct. * Factor out code getting sector address from ide_dump_ata_status() to the new ide_dump_sector() function. * Convert ide_dump_sector() to use ide_tf_read() and ide_get_lba_addr(). * Remove no longer needed ide_read_24(). The only change in functionality caused by this patch is that ide_dump_ata_status() no longer prints "high"/"low" parts of LBA48 sector address (of course LBA48 sector address is still printed). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide-disk: use do_rw_taskfile() (take 2)Bartlomiej Zolnierkiewicz1-7/+2
* Add IDE_TFLAG_DMA_PIO_FALLBACK taskfile flag to indicate the need to skip loading taskfile registers in do_rw_taskfile(). * Export do_rw_taskfile(). * Convert __ide_do_rw_disk() to use do_rw_taskfile(). * Unexport ide_tf_load(). * Unexport {pre_task_out,task_in}_intr() and make it static. * Remove incorrect comment about do_rw_taskfile() from <linux/ide.h>. There should be no functionality changes caused by this patch. v2: * Add missing blk_fs_request() check to task_dma_ok() (for VDMA). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove 'handler' field from ide_task_t (take 2)Bartlomiej Zolnierkiewicz1-4/+1
* Add IDE_TFLAG_CUSTOM_HANDLER taskfile flag and use it for internal requests which require custom handlers. Check the flag in do_rw_taskfile() and set handler accordingly. * Cleanup ide_init_{specify,restore,setmult}_cmd() and rename it to ide_tf_set_{specify,restore,setmult}_cmd(). * Make {set_geometry,recal,set_multmode}_intr() static. * Remove no longer needed 'handler' field from ide_task_t. v2: * 'handler' in do_rw_taskfile() must be set to NULL initially. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: use ->data_phase to set ->handler in do_rw_taskfile()Bartlomiej Zolnierkiewicz1-1/+0
* Use ->data_phase to set ->handler in do_rw_taskfile() instead of setting ->handler in callers of ide_raw_taskfile()/do_rw_taskfile(). * Unexport task_no_data_intr() and make it static. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: convert do_rw_taskfile() to use ->data_phaseBartlomiej Zolnierkiewicz1-2/+0
* Use task->data_phase in do_rw_taskfile() to decide what to do. * task->prehandler is only used by TASKFILE[_MULTI]_OUT so just use pre_task_out_intr() directly and remove no longer needed 'prehandler' field from ide_task_t. * Remove no longer needed ide_pre_handler_t type. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: merge flagged_taskfile() into do_rw_taskfile()Bartlomiej Zolnierkiewicz1-5/+0
Based on the earlier work by Tejun Heo. task->data_phase == TASKFILE_MULTI_{IN,OUT} vs drive->mult_count == 0 check is needed also for ide_taskfile_ioctl() requests that don't have IDE_TFLAG_FLAGGED taskfile flag set. Cc: Tejun Heo <htejun@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove 'tf_in_flags' field from ide_task_tBartlomiej Zolnierkiewicz1-2/+3
* Add IDE_TFLAG_IN_DATA taskfile flag to indicate the need of reading IDE_DATA_REG in ide_end_drive_cmd(). Set the new flag in ide_taskfile_ioctl() if ->in_flags.b.data is set. * Add IDE_TFLAG_FLAGGED_SET_IN_FLAGS taskfile flag to indicate the need of modifying ->in_flags in ide_taskfile_ioctl(). Set the new flag in flagged_taskfile() and move the code modifying ->tf_in_flags to ide_taskfile_ioctl(). While at it remove the bogus comment: ->tf_in_flags (except .b.data) have no effect on selection of registers to read. * Remove no longer needed 'tf_in_flags' field from ide_task_t. As the result we finally have the internals of HDIO_DRIVE_TASKFILE ioctl separated from the core IDE code. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove 'command_type' field from ide_task_tBartlomiej Zolnierkiewicz1-3/+2
* Add 'data_buf' and 'nsect' variables in ide_taskfile_ioctl() to cache data buffer pointer and number of sectors to transfer (this allows us to have only one ide_diag_taskfile() call). * Add IDE_TFLAG_WRITE taskfile flag and use it to check whether the REQ_RW request flag should be set. * Move ->command_type handling from ide_diag_taskfile() to ide_taskfile_ioctl() and use ->req_cmd instead of ->command_type. * Add 'nsect' parameter to ide_raw_taskfile(). * Merge ide_diag_taskfile() into ide_raw_taskfile(). * Initialize ->data_phase explicitly in idedisk_prepare_flush(), ide_start_power_step() and ide_disk_special(). * Remove no longer needed 'command_type' field from ide_task_t. * Add #ifndef/#endif __KERNEL__ to <linux/hdreg.h> around no longer used by kernel IDE_DRIVE_TASK_* and TASKFILE_* defines. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove hwif->intrprocBartlomiej Zolnierkiewicz1-2/+0
Given that: * hpt366.c::hpt3xx_intrproc() is the only user of hwif->intrproc * hpt366.c::hpt3xx_quirkproc() sets drive->quirk_list to 1 for quirky drives which is a value unique to hpt366 host driver we can remove hwif->intproc and just check for drive->quirk_list == 1 in ide_do_request(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove SELECT_INTERRUPT()Bartlomiej Zolnierkiewicz1-1/+0
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove QUIRK_LIST()Bartlomiej Zolnierkiewicz1-1/+0
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: add ide_pktcmd_tf_load() helperBartlomiej Zolnierkiewicz1-0/+2
Add ide_pktcmd_tf_load() helper and convert ATAPI device drivers to use it. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove atapi_ireason_t (take 3)Bartlomiej Zolnierkiewicz1-24/+0
Remove atapi_ireason_t. While at it: * replace 'HWIF(drive)' by 'drive->hwif' (or just 'hwif' where possible) v2: * v1 had CD and IO bits reversed in many places. * Use CD and IO defines from <linux/hdreg.h>. v3: * Fix incorrect "(ireason & IO) == test_bit()". (Noticed by Sergei) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove ata_nsector_t, ata_data_t and atapi_bcount_tBartlomiej Zolnierkiewicz1-20/+0
Remove ata_nsector_t, ata_data_t (unused) and atapi_bcount_t. While at it: * replace 'HWIF(drive)' by 'hwif' Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove atapi_feature_tBartlomiej Zolnierkiewicz1-27/+0
Remove atapi_feature_t. While at it: * replace 'HWIF(drive)' by 'hwif' Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove atapi_error_t (take 2)Bartlomiej Zolnierkiewicz1-30/+0
Remove atapi_error_t. While at it: * replace 'HWIF(drive)' by 'drive->hwif' v2: * Add {ILI,EOM,LFS}_ERR defines to <linux/hdreg.h>. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove ata_status_t and atapi_status_tBartlomiej Zolnierkiewicz1-44/+0
Remove ata_status_t (unused) and atapi_status_t. While at it: * replace 'HWIF(drive)' by 'drive->hwif' (or just 'hwif' where possible) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: CPU endianness doesn't matter for special_tBartlomiej Zolnierkiewicz1-11/+0
special_t is used only internally by the IDE subsystem (it isn't related to hardware registers and isn't exported to the user-space). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: use ide_tf_load() in execute_drive_cmd()Bartlomiej Zolnierkiewicz1-0/+1
* Add IDE_TFLAG_OUT_DEVICE taskfile flag to indicate the need of writing the Device register and handle it in ide_tf_load(). Update ide_tf_load() and {do_rw,flagged}_taskfile() users accordingly. * Use struct ide_taskfile and ide_tf_load() in execute_drive_cmd(). * Make the debugging code dump all taskfile registers for both REQ_ATA_TYPE_{CMD,TASK} requests and move it to ide_tf_load() so it also covers REQ_ATA_TYPE_TASKFILE requests. There should be no functionality changes caused by this patch (unless DEBUG is defined). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove stale ide.h "configuration options"Bartlomiej Zolnierkiewicz1-23/+4
Remove stale ide.h "configuration options": * INITIAL_MULT_COUNT - always defined to 0 * SUPPORT_SLOW_DATA_PORTS - unused * OK_TO_RESET_CONTROLLER - always defined to 1 * DISABLE_IRQ_NOSYNC - always defined to 0 Leave SUPPORT_VLB_SYNC (defined to 0 for CRIS and FRV, otherwise to 1) for now but disallow overriding it by <asm/ide.h>. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: use do_rw_taskfile() in flagged_taskfile()Bartlomiej Zolnierkiewicz1-2/+23
Based on the earlier work by Tejun Heo. * Move setting IDE_TFLAG_LBA48 taskfile flag from do_rw_taskfile() function to the callers. * Add IDE_TFLAG_FLAGGED taskfile flag for flagged taskfiles coming from ide_taskfile_ioctl(). Check it instead of ->tf_out_flags.all. * Add IDE_TFLAG_OUT_DATA taskfile flag to indicate the need to load IDE data register in ide_tf_load(). * Add IDE_TFLAG_OUT_* taskfile flags to indicate the need to load particular IDE taskfile registers in ide_tf_load(). * Update do_rw_taskfile() and ide_tf_load() users to set respective IDE_TFLAG_OUT_* taksfile flags. * Add task_dma_ok() helper. * Use IDE_TFLAG_FLAGGED taskfile flag to select HIHI mask in ide_tf_load(). * Use do_rw_taskfile() in flagged_taskfile(). * Remove no longer needed 'tf_out_flags' field from ide_task_t. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: add ide_no_data_taskfile() helperBartlomiej Zolnierkiewicz1-0/+2
* Add ide_no_data_taskfile() helper and convert ide_raw_taskfile() w/ NO DATA protocol users to use it instead. * Set ->data_phase explicitly in ide_no_data_taskfile() (TASKFILE_NO_DATA is defined as 0x0000). * Unexport task_no_data_intr(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: add ide_tf_load() helperBartlomiej Zolnierkiewicz1-0/+8
Based on the earlier work by Tejun Heo. * Add 'tf_flags' field (for taskfile flags) to ide_task_t. * Add IDE_TFLAG_LBA48 taskfile flag for LBA48 taskfiles. * Add IDE_TFLAG_NO_SELECT_MASK taskfile flag for __ide_do_rw_disk() which doesn't use SELECT_MASK() (looks like a bug but it requires some more investigation). * Split off ide_tf_load() helper from do_rw_taskfile(). * Convert __ide_do_rw_disk() to use ide_tf_load(). There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: add struct ide_taskfile (take 2)Bartlomiej Zolnierkiewicz1-10/+33
* Don't set write-only ide_task_t.hobRegister[6] and ide_task_t.hobRegister[7] in idedisk_set_max_address_ext(). * Add struct ide_taskfile and use it in ide_task_t instead of tfRegister[] and hobRegister[]. * Remove no longer needed IDE_CONTROL_OFFSET_HOB define. * Add #ifndef/#endif __KERNEL__ around definitions of {task,hob}_struct_t. While at it: * Use ATA_LBA define for LBA bit (0x40) as suggested by Tejun Heo. v2: * Add missing newlines. (Noticed by Sergei) * Use ~ATA_LBA instead of 0xBF. (Noticed by Sergei) * Use unnamed unions for error/feature and status/command. (Suggested by Sergei). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove task_ioreg_t typedef (take 2)Bartlomiej Zolnierkiewicz1-3/+4
Remove task_ioreg_t typedef from the kernel code (but leave it in <linux/hdreg.h> for #ifndef/#endif __KERNEL__ case). While at it also move sata_ioreg_t typedef under #ifndef/#endif __KERNEL__. v2: Remove name of the second parameter from ide_execute_command() declaration. (Noticed by Sergei). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove ->dma_master field from ide_hwif_t (take 5)Bartlomiej Zolnierkiewicz1-1/+0
* Convert cmd64x, hpt366 and pdc202xx_old host drivers to use pci_resource_start(hwif->pci_dev, 4) instead of hwif->dma_master. * Remove no longer needed ->dma_master field from ide_hwif_t. v2: * Use the more readable 'hwif->dma_base - (hwif->channel * 8)' instead of pci_resource_start(hwif->pci_dev, 4). v3: * Use hwif->extra_base in hpt366/pdc20xx_old + some cosmetic fixups over v2 (suggested by Sergei). v4: * Correct offsets in hpt3xxn_set_clock(). v5: * Use hwif->extra_base in hpt366 for _real_ this time. (Noticed by Sergei) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-12-12ide: DMA reporting and validity checking fixes (take 3)Bartlomiej Zolnierkiewicz1-3/+3
* ide_xfer_verbose() fixups: - beautify returned mode names - fix PIO5 reporting - make it return 'const char *' * Change printk() level from KERN_DEBUG to KERN_INFO in ide_find_dma_mode(). * Add ide_id_dma_bug() helper based on ide_dma_verbose() to check for invalid DMA info in identify block. * Use ide_id_dma_bug() in ide_tune_dma() and ide_driveid_update(). As a result DMA won't be tuned or will be disabled after tuning if device reports inconsistent info about enabled DMA mode (ide_dma_verbose() does the same checks while the IDE device is probed by ide-{cd,disk} device driver). * Remove no longer needed ide_dma_verbose(). This patch should fix the following problem with out-of-sync IDE messages reported by Nick Warne: hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache<7>hdd: skipping word 93 validity check , UDMA(66) and later debugged by Mark Lord to be caused by: ide_dma_verbose() printk( ... "2048kB Cache"); eighty_ninty_three() printk(KERN_DEBUG "%s: skipping word 93 validity check\n"); ide_dma_verbose() printk(", UDMA(66)" Please note that as a result ide-{cd,disk} device drivers won't report the DMA speed used but this is intended since now DMA mode being used is always reported by IDE core code. v2: * fixes suggested by Randy: - use KERN_CONT for printk()-s in ide-{cd,disk}.c - don't remove argument name from ide_xfer_verbose() declaration v3: * Remove incorrect check for (id->field_valid & 1) from ide_id_dma_bug() (spotted by Sergei). * "XFER SLOW" -> "PIO SLOW" in ide_xfer_verbose() (suggested by Sergei). * Fix ide_find_dma_mode() to report the correct mode ('mode' after being limited by 'req_mode'). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Nick Warne <nick@ukfsn.org> Cc: Mark Lord <lkml@rtr.ca> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-05ide: move ide_fixstring() documentation to ide-iops.c from ide.hBartlomiej Zolnierkiewicz1-8/+1
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-22Expand hwif->host_flags so that it fits new flags.David Miller1-1/+1
Commit 238e4f142c33bb34440cc64029dde7b9fbc4e65f ("ide: add IDE_HFLAG_NO_LBA48 and IDE_HFLAG_NO_LBA48_DMA host flags") caused a regression because the host_flags in struct hwif_s wasn't expanded to cope with the fact that the host flags no longer fit in 16 bits. Signed-off-by: David S. Miller <davem@davemloft.net> [ I hate having to add good commit descriptions. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-20ide: constify struct ide_port_infoBartlomiej Zolnierkiewicz1-5/+5
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: replace ide_pci_device_t by struct ide_port_infoBartlomiej Zolnierkiewicz1-10/+8
* Rename struct ide_pci_device_s to struct ide_port_info. * Remove ide_pci_device_t typedef. While at it: * Fix __ide_pci_register_driver() comment. * Fix aec62xx_init_one() comment. * Remove unused 'cds' field from ide_hwgroup_t. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: remove write-only hwif->hwBartlomiej Zolnierkiewicz1-1/+0
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add hwif->ack_intr hookBartlomiej Zolnierkiewicz1-0/+2
* Add hwif->ack_intr hook and use it instead of hwif->hw.ack_intr. * Add missing brackets to cris-v32 and powerpc ide_ack_intr() macros. Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20icside: use ec->dma directlyBartlomiej Zolnierkiewicz1-5/+0
* hwif->hwif_data contains pointer to struct expansion_card so use ec->dma directly instead of caching it in hwif->hw.dma. * Remove no longer needed hw_regs_t.dma and NO_DMA define. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add CONFIG_IDE_ARCH_OBSOLETE_INITBartlomiej Zolnierkiewicz1-6/+2
Add CONFIG_IDE_ARCH_OBSOLETE_INIT to drivers/ide/Kconfig and use it instead of defining IDE_ARCH_OBSOLETE_INIT in <arch/ide.h>. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: remove redundant comments from ide.hBartlomiej Zolnierkiewicz1-41/+0
There is better documentation for these functions in drivers/ide/. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add ide_find_port() helperBartlomiej Zolnierkiewicz1-0/+2
* Add ide_find_port() helper. * Convert icside, rapide and ide_platform host drivers to use it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add ide_device_add()Bartlomiej Zolnierkiewicz1-4/+3
* Add ide_device_add() helper and convert host drivers to use it instead of open-coded variants. * Make ide_pci_setup_ports() and do_ide_setup_pci_device() take 'u8 *idx' argument instead of 'ata_index_t *index'. * Remove no longer needed ata_index_t. * Unexport probe_hwif_init() and make it static. * Unexport ide_proc_register_port(). There should be no functionality changes caused by this patch (sgiioc4.c: ide_proc_register_port() requires hwif->present to be set and it won't be set if probe_hwif_init() fails). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add ->fixup method to ide_hwif_tBartlomiej Zolnierkiewicz1-7/+4
* Add ->fixup method to ide_hwif_t. * Set hwif->fixup in ide_pci_setup_ports() to d->fixup. * Use hwif->fixup in probe_hwif(). * Use probe_hwif_init() instead of probe_hwif_init_with_fixup() in ide_setup_pci_device(). * Add 'fixup' argument to ide_register_hw() and use it to set hwif->fixup, update all ide_register_hw() users accordingly. * Convert ide-cs/delkin_cb host drivers to use ide_register_hw(). * Restore hwif->fixup in ide_hwif_restore(). * Remove ide_register_hw_with_fixup(), probe_hwif_init_with_fixup() and 'fixup' argument from probe_hwif(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add IDE_HFLAG_{IO_32BIT,UNMASK_IRQS} host flagsBartlomiej Zolnierkiewicz1-0/+4
Add IDE_HFLAG_{IO_32BIT,UNMASK_IRQS} host flag to tell ide_pci_setup_ports() to set drive->{io_32bit,unmask} for both drives on the interface. Convert amd74xx, sl82c105 and via82cxxx host drivers to use these new host flags. While at it: * Add IDE_HFLAGS_AMD define (amd74xx host driver). * Add IDE_HFLAGS_VIA define (via82cxxx host driver). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add IDE_HFLAG_RQSIZE_256 host flagBartlomiej Zolnierkiewicz1-0/+2
Add IDE_HFLAG_RQSIZE_256 host flag to tell ide_pci_setup_ports() to set hwif->rqsize to 256 sectors. Convert pdc202xx_old host driver to use it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add IDE_HFLAG_FORCE_LEGACY_IRQS host flagBartlomiej Zolnierkiewicz1-0/+2
Add IDE_HFLAG_FORCE_LEGACY_IRQS host flag to tell ide_pci_setup_ports() to always set hwif->irq to legacy IRQ 14/15 and convert generic IDE PCI and via82cxxx host drivers to use it. While at it: * Add IDE_HFLAGS_UMC define (generic IDE PCI host driver). * Remove no longer needed init_hwif_generic() (generic IDE PCI host driver). * Set d->udma_mask instead of hwif->ultra_mask (via82cxxx host driver). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add ->chipset field to ide_pci_device_tBartlomiej Zolnierkiewicz1-2/+5
Add ->chipset field to ide_pci_device_t and use it in ide_hwif_configure() to set hwif->chipset. Convert cmd64x, cy82c693, rz1000 and trm290 host drivers to use this new ability. While at it define hwif_chipset_t as u8 to save some space in hw_regs_t, ide_hwif_t and ide_pci_device_t instances. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: remove unused ->next field from ide_pci_device_tBartlomiej Zolnierkiewicz1-1/+0
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: add IDE_HFLAG_LEGACY_IRQS host flagBartlomiej Zolnierkiewicz1-0/+2
Add IDE_HFLAG_LEGACY_IRQS host flag to tell ide_pci_setup_ports() to set hwif->irq to legacy IRQ 14/15 (iff hwif->irq is not already set) and convert atiixp, piix, serverworks, sis5513 and slc90e66 host drivers to use it. While at it: * In piix.c add IDE_HFLAGS_PIIX define and don't use ->init_hwif for MPIIX. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: add IDE_HFLAG_SERIALIZE host flagBartlomiej Zolnierkiewicz1-0/+2
Add IDE_HFLAG_SERIALIZE host flag to tell ide_pci_setup_ports() to set hwif/mate->serialized and convert aec62xx, cs5530 and sc1200 host drivers to use it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: add IDE_HFLAG_ERROR_STOPS_FIFO host flagBartlomiej Zolnierkiewicz1-1/+2
Add IDE_HFLAG_ERROR_STOPS_FIFO host flag and use it instead of hwif->err_stops_fifo. As a side-effect this change fixes hwif->err_stops_fifo not being restored by ide_hwif_restore(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: remove .init_setup from ide_pci_device_tBartlomiej Zolnierkiewicz1-1/+0
Now that all users were fixed we can safely remove it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.