aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/irq.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2008-10-18genirq: improve include filesThomas Gleixner1-19/+1
Move the irq_desc related iterators out of irq.h, into irqnr.h, also available via interrupt.h. This way non-genirq (and even non-hardirq) architectures get the common definitions and iterators. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16proc: fixup irq iteratorThomas Gleixner1-0/+3
There is no need for irq_desc here. Even for sparse_irq we can handle this clever in for_each_irq_nr(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16genirq: add reverse iterator for irq_descThomas Gleixner1-0/+4
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16genirq: revert dynarrayThomas Gleixner1-15/+0
Revert the dynarray changes. They need more thought and polishing. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16genirq: remove irq_to_desc_allocThomas Gleixner1-5/+0
Remove the leftover of sparseirqs. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16genirq: remove sparse irq codeThomas Gleixner1-20/+0
This code is not ready, but we need to rip it out instead of rebasing as we would lose the APIC/IO_APIC unification otherwise. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16genirq: use inline function for irq_to_descThomas Gleixner1-2/+13
For the non sparse irq case an inline function is perfectly fine. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16genirq: consolidate nr_irqs and for_each_irq_desc()Thomas Gleixner1-5/+12
Move all of those to linux/irq.h where they belong. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16sparseirq: move kstat_irqs from kstat to irq_desc - fixYinghai Lu1-2/+2
fix non-sparseirq architectures. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: remove irqbalance in kernel for 32 bitYinghai Lu1-11/+3
This has been deprecated for years, the user space irqbalanced utility works better with numa, has configurable policies, etc... Signed-off-by: Yinghai Lu <yhlu.kernel@gmai.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: use 28 bits irq NR for pci msi/msix and htYinghai Lu1-0/+1
also print out irq no in /proc/interrups and /proc/stat in hex, so could tell bus/dev/func. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: put irq_2_iommu pointer into irq_descYinghai Lu1-0/+4
when CONFIG_HAVE_SPARSE_IRQ preallocate some irq_2_iommu entries, and use get_one_free_irq_2_iomm to get new one and link to irq_desc if needed. else will use dyn_array or static array. v2: <= nr_irqs fix Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: separate sparse_irqs from sparse_irqs_freeYinghai Lu1-1/+1
so later don't need compare with -1U Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86_64: rename irq_desc/irq_desc_allocYinghai Lu1-1/+1
change names: irq_desc() ==> irq_desc_alloc __irq_desc() ==> irq_desc Also split a few of the uses in lowlevel x86 code. v2: need to check if desc is null in smp_irq_move_cleanup Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16generic: add irq_desc in function in parameterYinghai Lu1-3/+6
So we could remove some duplicated calling to irq_desc v2: make sure irq_desc in init/main.c is not used without generic_hardirqs Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: replace loop with nr_irqs with for_each_irq_descYinghai Lu1-0/+7
There are a handful of loops that go from 0 to nr_irqs and use get_irq_desc() on them. These would allocate all the irq_desc entries, regardless of the need for them. Use the smarter for_each_irq_desc() iterator that will only iterate over the present ones. v2: make sure arch without GENERIC_HARDIRQS work too Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: add irq_desc_without_newYinghai Lu1-0/+13
add an irq_desc accessor that will not allocate any sparse entry but returns failure if there's no entry present. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: move kstat_irqs from kstat to irq_descYinghai Lu1-0/+7
based on Eric's patch ... together mold it with dyn_array for irq_desc, will allcate kstat_irqs for nr_irq_desc alltogether if needed. -- at that point nr_cpus is known already. v2: make sure system without generic_hardirqs works they don't have irq_desc v3: fix merging v4: [mingo@elte.hu] fix typo [ mingo@elte.hu ] irq: build fix fix: arch/x86/xen/spinlock.c: In function 'xen_spin_lock_slow': arch/x86/xen/spinlock.c:90: error: 'struct kernel_stat' has no member named 'irqs' Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: put timer_rand_state pointer into irq_descYinghai Lu1-0/+2
irq_timer_state[] is a NR_IRQS sized array that is a side-by array to the real irq_desc[] array. Integrate that field into the (now dynamic) irq_desc dynamic array and save some RAM. v2: keep the old way to support arch not support irq_desc Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16generic: sparse irqs: use irq_desc() together with dyn_array, instead of irq_desc[]Yinghai Lu1-11/+21
add CONFIG_HAVE_SPARSE_IRQ to for use condensed array. Get rid of irq_desc[] array assumptions. Preallocate 32 irq_desc, and irq_desc() will try to get more. ( No change in functionality is expected anywhere, except the odd build failure where we missed a code site or where a crossing commit itroduces new irq_desc[] usage. ) v2: according to Eric, change get_irq_desc() to irq_desc() Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: make irq_desc to use dyn_arrayYinghai Lu1-0/+4
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16Merge branch 'linus' into genirqIngo Molnar1-0/+1
2008-07-22genirq: remove last NO_IDLE_HZ leftoversThomas Gleixner1-4/+0
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-18Merge branch 'linus' into x86/x2apicIngo Molnar1-9/+0
2008-07-12x64, x2apic/intr-remap: generic irq migration support from process contextSuresh Siddha1-0/+1
Generic infrastructure for migrating the irq from the process context in the presence of CONFIG_GENERIC_PENDING_IRQ. This will be used later for migrating irq in the presence of interrupt-remapping. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-05genirq: Expose default irq affinity mask (take 3)Max Krasnyansky1-9/+0
Current IRQ affinity interface does not provide a way to set affinity for the IRQs that will be allocated/activated in the future. This patch creates /proc/irq/default_smp_affinity that lets users set default affinity mask for the newly allocated IRQs. Changing the default does not affect affinity masks for the currently active IRQs, they have to be changed explicitly. Updated based on Paul J's comments and added some more documentation. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Cc: pj@sgi.com Cc: a.p.zijlstra@chello.nl Cc: tglx@linutronix.de Cc: rdunlap@xenotime.net Cc: mingo@elte.hu Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-02genirq: reenable a nobody cared disabled irq when a new driver arrivesThomas Gleixner1-0/+1
Uwe Kleine-Koenig has some strange hardware where one of the shared interrupts can be asserted during boot before the appropriate driver loads. Requesting the shared irq line from another driver result in a spurious interrupt storm which finally disables the interrupt line. I have seen similar behaviour on resume before (the hardware does not work anymore so I can not verify). Change the spurious disable logic to increment the disable depth and mark the interrupt with an extra flag which allows us to reenable the interrupt when a new driver arrives which requests the same irq line. In the worst case this will disable the irq again via the spurious trap, but there is a decent chance that the new driver is the one which can handle the already asserted interrupt and makes the box usable again. Eric Biederman said further: This case also happens on a regular basis in kdump kernels where we deliberately don't shutdown the hardware before starting the new kernel. This patch should reduce the need for using irqpoll in that situation by a small amount. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-and-Acked-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
2008-04-17[S390] genirq/clockevents: move irq affinity prototypes/inlines to interrupt.hRussell King1-10/+0
> Generic code is not supposed to include irq.h. Replace this include > by linux/hardirq.h instead and add/replace an include of linux/irq.h > in asm header files where necessary. > This change should only matter for architectures that make use of > GENERIC_CLOCKEVENTS. > Architectures in question are mips, x86, arm, sh, powerpc, uml and sparc64. > > I did some cross compile tests for mips, x86_64, arm, powerpc and sparc64. > This patch fixes also build breakages caused by the include replacement in > tick-common.h. I generally dislike adding optional linux/* includes in asm/* includes - I'm nervous about this causing include loops. However, there's a separate point to be discussed here. That is, what interfaces are expected of every architecture in the kernel. If generic code wants to be able to set the affinity of interrupts, then that needs to become part of the interfaces listed in linux/interrupt.h rather than linux/irq.h. So what I suggest is this approach instead (against Linus' tree of a couple of days ago) - we move irq_set_affinity() and irq_can_set_affinity() to linux/interrupt.h, change the linux/irq.h includes to linux/interrupt.h and include asm/irq_regs.h where needed (asm/irq_regs.h is supposed to be rarely used include since not much touches the stacked parent context registers.) Build tested on ARM PXA family kernels and ARM's Realview platform kernels which both use genirq. [ tglx@linutronix.de: add GENERIC_HARDIRQ dependencies ] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-02-13Final removal of FASTCALL()/fastcallHarvey Harrison1-1/+0
All users are gone, remove definitions and comments referring to them. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08IRQ_NOPROBE helper functionsRalf Baechle1-0/+3
Probing non-ISA interrupts using the handle_percpu_irq as their handle_irq method may crash the system because handle_percpu_irq does not check IRQ_WAITING. This for example hits the MIPS Qemu configuration. This patch provides two helper functions set_irq_noprobe and set_irq_probe to set rsp. clear the IRQ_NOPROBE flag. The only current caller is MIPS code but this really belongs into generic code. As an aside, interrupt probing these days has become a mostly obsolete if not dangerous art. I think Linux interrupts should be changed to default to non-probing but that's subject of this patch. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-and-tested-by: Rob Landley <rob@landley.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08Remove fastcall from linux/includeHarvey Harrison1-8/+8
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-18genirq: add unlocked version of set_irq_handler()Kevin Hilman1-0/+7
Add unlocked version for use by irq_chip.set_type handlers which may wish to change handler to level or edge handler when IRQ type is changed. The normal set_irq_handler() call cannot be used because it tries to take irq_desc.lock which is already held when the irq_chip.set_type hook is called. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-07-31irq.h fix kernel-docRandy Dunlap1-0/+1
Add kernel-doc entry in <linux/irq.h> for: Warning(linux-2.6.22-git12//include/linux/irq.h:177): No description found for parameter 'last_unhandled' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16Improve behaviour of spurious IRQ detectAlan Cox1-0/+1
Currently we handle spurious IRQ activity based upon seeing a lot of invalid interrupts, and we clear things back on the base of lots of valid interrupts. Unfortunately in some cases you get legitimate invalid interrupts caused by timing asynchronicity between the PCI bus and the APIC bus when disabling interrupts and pulling other tricks. In this case although the spurious IRQs are not a problem our unhandled counters didn't clear and they act as a slow running timebomb. (This is effectively what the serial port/tty problem that was fixed by clearing counters when registering a handler showed up) It's easy enough to add a second parameter - time. This means that if we see a regular stream of harmless spurious interrupts which are not harming processing we don't go off and do something stupid like disable the IRQ after a month of running. OTOH lockups and performance killers show up a lot more than 10/second [akpm@linux-foundation.org: cleanup] Signed-off-by: Alan Cox <alan@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Pad irq_desc to internode cacheline sizeRavikiran G Thirumalai1-3/+1
We noticed a drop in n/w performance due to the irq_desc being cacheline aligned rather than internode aligned. We see 50% of expected performance when two e1000 nics local to two different nodes have consecutive irq descriptors allocated, due to false sharing. Note that this patch does away with cacheline padding for the UP case, as it does not seem useful for UP configurations. Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] FRV: Missing error defsDavid Howells1-0/+1
linux/irq.h uses EINVAL but does not #include linux/errno.h. This results in the compiler spitting out errors on some files. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-26[PATCH] irq: Remove set_native_irq_infoEric W. Biederman1-11/+0
This patch replaces all instances of "set_native_irq_info(irq, mask)" with "irq_desc[irq].affinity = mask". The latter form is clearer uses fewer abstractions, and makes access to this field uniform accross different architectures. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-19[PATCH] Declare init_irq_proc before we use it.Andrew Morton1-3/+0
powerpc gets: init/main.c: In function `do_basic_setup': init/main.c:714: warning: implicit declaration of function `init_irq_proc' but we cannot include linux/irq.h in generic code. Fix it by moving the declaration into linux/interrupt.h instead. And make sure all code that defines init_irq_proc() is including linux/interrupt.h. And nuke an ifdef-in-C Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] IRQ kernel-doc fixesRandy Dunlap1-0/+1
Fix kernel-doc warnings in IRQ management. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] genirq: remove IRQ_DISABLEDIngo Molnar1-4/+3
Now that disable_irq() defaults to delayed-disable semantics, the IRQ_DISABLED flag is not needed anymore. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] Add a function to handle interrupt affinity settingThomas Gleixner1-0/+10
Provide funtions to: - check, whether an interrupt can set the affinity - pin the interrupt to a given cpu Necessary for the ability to setup clocksources more flexible (e.g. use the different HPET channels per CPU) [akpm@osdl.org: alpha build fix] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] Add irq flag to disable balancing for an interruptThomas Gleixner1-17/+25
Add a flag so we can prevent the irq balancing of an interrupt. Move the bits, so we have room for more :) Necessary for the ability to setup clocksources more flexible (e.g. use the different HPET channels per CPU) Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-07msi: Kill the msi_desc array.Eric W. Biederman1-0/+4
We need to be able to get from an irq number to a struct msi_desc. The msi_desc array in msi.c had several short comings the big one was that it could not be used outside of msi.c. Using irq_data in struct irq_desc almost worked except on some architectures irq_data needs to be used for something else. So this patch adds a msi_desc pointer to irq_desc, adds the appropriate wrappers and changes all of the msi code to use them. The dynamic_irq_init/cleanup code was tweaked to ensure the new field is left in a well defined state. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-20[PATCH] genirq: clean up irq-flow-type naming, fixIngo Molnar1-0/+3
Re-add the set_irq_chip_and_handler() prototype, it's still widely used. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Olaf Hering <olaf@aepfle.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17[PATCH] genirq: clean up irq-flow-type namingIngo Molnar1-12/+10
Introduce desc->name and eliminate the handle_irq_name() hack. Add set_irq_chip_and_handler_name() to set the flow type and name at once. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Matthew Wilcox <willy@debian.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells1-25/+15
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05IRQ: Typedef the IRQ flow handler function typeDavid Howells1-18/+12
Typedef the IRQ flow handler function type. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 8e973fbdf5716b93a0a8c0365be33a31ca0fa351 commit)
2006-10-04[PATCH] msi: simplify msi sanity checks by adding with generic irq codeEric W. Biederman1-0/+7
Currently msi.c is doing sanity checks that make certain before an irq is destroyed it has no more users. By adding irq_has_action I can perform the test is a generic way, instead of relying on a msi specific data structure. By performing the core check in dynamic_irq_cleanup I ensure every user of dynamic irqs has a test present and we don't free resources that are in use. In msi.c this allows me to kill the attrib.state member of msi_desc and all of the assciated code to maintain it. To keep from freeing data structures when irq cleanup code is called to soon changing dyanamic_irq_cleanup is insufficient because there are msi specific data structures that are also not safe to free. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] genirq: irq: remove msi hacksEric W. Biederman1-36/+0
Because of the nasty way that CONFIG_PCI_MSI was implemented we wound up with set_irq_info and set_native_irq_info, with move_irq and move_native_irq. Both functions did the same thing but they were built and called under different circumstances. Now that the msi hacks are gone we can kill move_irq and set_irq_info. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] genirq: irq: add a dynamic irq creation APIEric W. Biederman1-1/+8
With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.