aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/mlx5/vport.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-01net/mlx5: Cache the system image guidAlaa Hleihel1-0/+2
The system image guid is a read-only field which is used by the TC offloads code to determine if two mlx5 devices belong to the same ASIC while adding flows. Read this once and save it on the core device rather than querying each time an offloaded flow is added. Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-08-08net/mlx5: Remove unused mlx5_query_vport_admin_stateEli Cohen1-2/+0
mlx5_query_vport_admin_state() is not used anywhere. Remove it. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26net/mlx5: Add packet dropped while vport down statisticsMoshe Shemesh1-0/+3
Added the following packets dropped while vport down statistics: Rx dropped while vport down - counts packets which were steered by e-switch to a vport, but dropped since the vport was down. This counter will be shown on ip link tool as part of the vport rx_dropped counter. Tx dropped while vport down - counts packets which were transmitted by a vport, but dropped due to vport logical link down. This counter will be shown on ip link tool as part of the vport tx_dropped counter. The counters are read from FW by command QUERY_VNIC_ENV. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-01-08{net, IB}/mlx5: Manage port association for multiport RoCEDaniel Jurgens1-0/+4
When mlx5_ib_add is called determine if the mlx5 core device being added is capable of dual port RoCE operation. If it is, determine whether it is a master device or a slave device using the num_vhca_ports and affiliate_nic_vport_criteria capabilities. If the device is a slave, attempt to find a master device to affiliate it with. Devices that can be affiliated will share a system image guid. If none are found place it on a list of unaffiliated ports. If a master is found bind the port to it by configuring the port affiliation in the NIC vport context. Similarly when mlx5_ib_remove is called determine the port type. If it's a slave port, unaffiliate it from the master device, otherwise just remove it from the unaffiliated port list. The IB device is registered as a multiport device, even if a 2nd port is not available for affiliation. When the 2nd port is affiliated later the GID cache must be refreshed in order to get the default GIDs for the 2nd port in the cache. Export roce_rescan_device to provide a mechanism to refresh the cache after a new port is bound. In a multiport configuration all IB object (QP, MR, PD, etc) related commands should flow through the master mlx5_core_dev, other commands must be sent to the slave port mlx5_core_mdev, an interface is provide to get the correct mdev for non IB object commands. Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-07-24net/mlx5: Add raw ethernet local loopback firmware commandHuy Nguyen1-1/+2
Add support for raw ethernet local loopback firmware command. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24net/mlx5: Push min-inline mode resolution helper into the coreOr Gerlitz1-0/+1
So we can use that from the IB driver too in downstream patches. This patch doesn't change any functionality. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2016-11-24net/mlx5: Enable to query min inline for a specific vportRoi Dayan1-2/+8
Also move the inline capablities enum to a shared header vport.h Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net/mlx5: Enable setting minimum inline header mode for VFsHadar Hen Zion1-0/+2
Implement the low-level part of the PF side in setting minimum inline header mode for VFs. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-07-25net/mlx5e: Query minimum required header copy during xmitHadar Hen Zion1-0/+2
Add support for query the minimum inline mode from the Firmware. It is required for correct TX steering according to L3/L4 packet headers. Each send queue (SQ) has inline mode that defines the minimal required headers that needs to be copied into the SQ WQE. The driver asks the Firmware for the wqe_inline_mode device capability value. In case the device capability defined as "vport context" the driver must check the reported min inline mode from the vport context before creating its SQs. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net/mlx5: E-Switch, Modify node guid on vf set MACNoa Osherovich1-0/+2
In RoCE, the RDMA-CM needs the node guid to establish connection between nodes. Today, the node guid exposed to mlx5 Ethernet VFs is zero, therefore RDMA-CM on the VF is broken. Whenever the administrator sets a MAC for a VF, derive the node guid from it and set it as well in the following way: MAC: e4:1d:2d:b3:f4:01 -> node_guid: e4:1d:2d:ff:fe:b3:f4:01 Fixes: 77256579c6b43 ('net/mlx5: E-Switch, Introduce Vport...') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24net/mlx5e: Use vport MTU rather than physical port MTUSaeed Mahameed1-0/+2
Set and report vport MTU rather than physical MTU, Driver will set both vport and physical port mtu and will rely on the query of vport mtu. SRIOV VFs have to report their MTU to their vport manager (PF), and this will allow them to work with any MTU they need without failing the request. Also for some cases where the PF is not a port owner, PF can work with MTU less than the physical port mtu if set physical port mtu didn't take effect. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-21net/mlx5_core: Implement modify HCA vport commandEli Cohen1-0/+4
Implement the modify HCA vport commands used to modify the parameters of virtual HCA's ports. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21net/mlx5_core: Add VF param when querying vport counterEli Cohen1-1/+2
Add a vf parameter to mlx5_core_query_vport_counter so we can call it to query counters of virtual functions. Also update current users of the API. PFs may call mlx5_core_query_vport_counter with other_vport set to indicate that they are querying a virtual function. The virtual function to be queried is given by the vf parameter. Virtual function numbering is zero based so the first VF is 0 and so on. When a PF queries its own function, the other_vport parameter is cleared. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-01net/mlx5_core: Add helper function to read virtual port countersMeny Yossefi1-0/+2
Added helper function to read 64bit virtual port Infiniband traffic counters. Signed-off-by: Meny Yossefi <menyy@mellanox.com> Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds1-0/+8
Pull rdma updates from Doug Ledford: "Initial roundup of 4.5 merge window patches - Remove usage of ib_query_device and instead store attributes in ib_device struct - Move iopoll out of block and into lib, rename to irqpoll, and use in several places in the rdma stack as our new completion queue polling library mechanism. Update the other block drivers that already used iopoll to use the new mechanism too. - Replace the per-entry GID table locks with a single GID table lock - IPoIB multicast cleanup - Cleanups to the IB MR facility - Add support for 64bit extended IB counters - Fix for netlink oops while parsing RDMA nl messages - RoCEv2 support for the core IB code - mlx4 RoCEv2 support - mlx5 RoCEv2 support - Cross Channel support for mlx5 - Timestamp support for mlx5 - Atomic support for mlx5 - Raw QP support for mlx5 - MAINTAINERS update for mlx4/mlx5 - Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates - Add support for remote invalidate to the iSER driver (pushed through the RDMA tree due to dependencies, acknowledged by nab) - Update to NFSoRDMA (pushed through the RDMA tree due to dependencies, acknowledged by Bruce)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (169 commits) IB/mlx5: Unify CQ create flags check IB/mlx5: Expose Raw Packet QP to user space consumers {IB, net}/mlx5: Move the modify QP operation table to mlx5_ib IB/mlx5: Support setting Ethernet priority for Raw Packet QPs IB/mlx5: Add Raw Packet QP query functionality IB/mlx5: Add create and destroy functionality for Raw Packet QP IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types IB/mlx5: Allocate a Transport Domain for each ucontext net/mlx5_core: Warn on unsupported events of QP/RQ/SQ net/mlx5_core: Add RQ and SQ event handling net/mlx5_core: Export transport objects IB/mlx5: Expose CQE version to user-space IB/mlx5: Add CQE version 1 support to user QPs and SRQs IB/mlx5: Fix data validation in mlx5_ib_alloc_ucontext IB/sa: Fix netlink local service GFP crash IB/srpt: Remove redundant wc array IB/qib: Improve ipoib UD performance IB/mlx4: Advertise RoCE v2 support IB/mlx4: Create and use another QP1 for RoCEv2 IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers ...
2015-12-23net/mlx5_core: Introduce access functions to query vport RoCE fieldsAchiad Shochat1-0/+5
Introduce access functions to query NIC vport system_image_guid, node_guid and qkey_viol_cntr. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23net/mlx5_core: Introduce access functions to enable/disable RoCEAchiad Shochat1-0/+3
A mlx5 Ethernet port must be explicitly enabled for RoCE. When RoCE is not enabled on the port, the NIC will refuse to create QPs attached to it and incoming RoCE packets will be considered by the NIC as plain Ethernet packets. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-03net/mlx5: Introduce access functions to modify/query vport vlansSaeed Mahameed1-0/+7
Those functions are needed to notify the upcoming L2 table and SR-IOV E-Switch(FDB) manager(PF), of the NIC vport (vf) vlan table changes. preperation for ethernet sriov and l2 table management. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net/mlx5: Introduce access functions to modify/query vport promisc modeSaeed Mahameed1-0/+9
Those functions are needed to notify the upcoming SR-IOV E-Switch(FDB) manager(PF), of the NIC vport (vf) promisc mode changes. Preperation for ethernet sriov and l2 table management. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net/mlx5: Introduce access functions to modify/query vport stateSaeed Mahameed1-1/+5
In preparation for SR-IOV we add here an API to enable each e-switch manager (PF) to configure its VFs link states in e-switch preparation for ethernet sriov. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net/mlx5: Introduce access functions to modify/query vport mac listsSaeed Mahameed1-0/+10
Those functions are needed to notify the upcoming L2 table and SR-IOV E-Switch(FDB) manager(PF), of the NIC vport (vf) UC/MC mac lists changes. preperation for ethernet sriov and l2 table management. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net/mlx5: Update access functions to Query/Modify vport MAC addressSaeed Mahameed1-1/+4
In preparation for SR-IOV we add here an API to enable each e-switch client (PF/VF) to configure its L2 MAC addresses and for the e-switch manager (usually the PF) to access them in order to be able to configure them into the e-switch. Therefore we now pass vport num parameter to mlx5_query_nic_vport_context, so PF can access other vports contexts. preperation for ethernet sriov and l2 table management. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-07net/mlx5_core: Fix static checker warnings around system guid query flowMajd Dibbiny1-1/+1
Fix static checker warnings in the flow of system guid query. Fixes: 707c4602cda6 ('net/mlx5_core: Add new query HCA vport commands') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04net/mlx5_core: Add new query HCA vport commandsMajd Dibbiny1-0/+14
Added the implementation for the following commands: 1. QUERY_HCA_VPORT_GID 2. QUERY_HCA_VPORT_PKEY 3. QUERY_HCA_VPORT_CONTEXT They will be needed when we move to work with ISSI > 0 in the IB driver too. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04net/mlx5_core: Make the vport helpers available for the IB driver tooMajd Dibbiny1-0/+41
Move the vport header file to be under include/linux/mlx5, such that the mlx5 IB can use it as well. Also add nic_ prefix to the vport NIC commands to differeniate between HCA vport commands and NIC vport commands. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.