aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/mlx5 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-10-14net/mlx5_core: Wait for FW readiness on startupEli Cohen2-1/+7
On device initialization, wait till firmware indicates that that it is done with initialization before proceeding to initialize the device. Also update initialization segment layout to match driver/firmware interface definitions. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14net/mlx5_core: Add pci error handlers to mlx5_core driverMajd Dibbiny1-0/+22
This patch implement the pci_error_handlers for mlx5_core which allow the driver to recover from PCI error. Once an error is detected in the PCI, the mlx5_pci_err_detected is called and it: 1) Marks the device to be in 'Internal Error' state. 2) Dispatches an event to the mlx5_ib to flush all the outstanding cqes with error. 3) Returns all the on going commands with error. 4) Unloads the driver. Afterwards, the FW is reset and mlx5_pci_slot_reset is called and it enables the device and restore it's pci state. If the later succeeds, mlx5_pci_resume is called, and it loads the SW stack. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14net/mlx5_core: Fix internal error detection conditionsEli Cohen1-0/+1
The detection of a fatal condition has been updated to take into account the state reported by the device or by detecting an all ones read of the firmware version which indicates that the device is not accessible. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx5_core: Use private health thread for each deviceEli Cohen1-3/+4
Use a single threaded work queue for each device in the system instead of using one thread for any device. This is required so we can concurrently process system error handling for all the devices that need that. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx5_core: Prepare cmd interface to system errors handlingEli Cohen1-1/+5
In preparation to handling system errors at the mlx5_core level, change the interface of cmd_work_handler to accept a 64 bit argument for the vector. This allows to encode a flag that signifies when the handler is called as a result of a driver logic that wishes to terminate commands that the hardware may not be able to terminate. Such command completions are detected at the handler and proper return status is encoded. To be able to terminate page handler commands, we make sure to set the corresponding bit in the bitmask. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-12/+0
Conflicts: net/dsa/slave.c net/dsa/slave.c simply had overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-28net/mlx5_core: Fix wrong name in structEli Cohen1-1/+1
The name refers to syndrome so uset ext_synd instread of ext_sync. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25IB/mlx5: Remove support for IB_DEVICE_LOCAL_DMA_LKEYSagi Grimberg2-12/+0
Commit 96249d70dd70 ("IB/core: Guarantee that a local_dma_lkey is available") allows ULPs that make use of the local dma key to keep working as before by allocating a DMA MR with local permissions and converted these consumers to use the MR associated with the PD rather then device->local_dma_lkey. ConnectIB has some known issues with memory registration using the local_dma_lkey (SEND, RDMA, RECV seems to work ok). Thus don't expose support for it (remove device->local_dma_lkey setting), and take advantage of the above commit such that no regression is introduced to working systems. The local_dma_lkey support will be restored in CX4 depending on FW capability query. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-09-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds2-0/+12
Pull inifiniband/rdma updates from Doug Ledford: "This is a fairly sizeable set of changes. I've put them through a decent amount of testing prior to sending the pull request due to that. There are still a few fixups that I know are coming, but I wanted to go ahead and get the big, sizable chunk into your hands sooner rather than waiting for those last few fixups. Of note is the fact that this creates what is intended to be a temporary area in the drivers/staging tree specifically for some cleanups and additions that are coming for the RDMA stack. We deprecated two drivers (ipath and amso1100) and are waiting to hear back if we can deprecate another one (ehca). We also put Intel's new hfi1 driver into this area because it needs to be refactored and a transfer library created out of the factored out code, and then it and the qib driver and the soft-roce driver should all be modified to use that library. I expect drivers/staging/rdma to be around for three or four kernel releases and then to go away as all of the work is completed and final deletions of deprecated drivers are done. Summary of changes for 4.3: - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits) IB/ipoib: Suppress warning for send only join failures IB/ipoib: Clean up send-only multicast joins IB/srp: Fix possible protection fault IB/core: Move SM class defines from ib_mad.h to ib_smi.h IB/core: Remove unnecessary defines from ib_mad.h IB/hfi1: Add PSM2 user space header to header_install IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY mlx5: Fix incorrect wc pkey_index assignment for GSI messages IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow IB/uverbs: reject invalid or unknown opcodes IB/cxgb4: Fix if statement in pick_local_ip6adddrs IB/sa: Fix rdma netlink message flags IB/ucma: HW Device hot-removal support IB/mlx4_ib: Disassociate support IB/uverbs: Enable device removal when there are active user space applications IB/uverbs: Explicitly pass ib_dev to uverbs commands IB/uverbs: Fix race between ib_uverbs_open and remove_one IB/uverbs: Fix reference counting usage of event files IB/core: Make ib_dealloc_pd return void IB/srp: Create an insecure all physical rkey only if needed ...
2015-08-28mlx5: Fix missing device local_dma_lkeySagi Grimberg2-0/+12
The mlx5 driver exposes device capability IB_DEVICE_LOCAL_DMA_LKEY but does not set the the device local_dma_lkey. This breaks rpcrdma drivers. Query and set this lkey when creating the device resources. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-17net/mlx5e: Support ethtool get/set_pauseparamAchiad Shochat1-0/+5
Only rx/tx pause settings. Autoneg setting is currently not supported. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Ethtool link speed setting fixesAchiad Shochat1-5/+6
- Port speed settings are applied by the device only upon port admin status transition from DOWN to UP. So we enforce this transition regardless of the port's current operation state (which may be occasionally DOWN if for example the network cable is disconnected). - Fix the PORT_UP/DOWN device interface enum - Set the local_port bit in the device PAOS register - EXPORT the PAOS (Port Administrative and Operational Status) register set/query access functions. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-06net/mlx5_core: Support physical port countersGal Pressman2-0/+11
Added physical port counters in the following standard formats to ethtool statistics: - IEEE 802.3 - RFC2863 - RFC2819 Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-06net/mlx5e: Light-weight netdev open/stopAchiad Shochat1-1/+8
Create/destroy TIRs, TISs and flow tables upon PCI probe/remove rather than upon the netdev ndo_open/stop. Upon ndo_stop(), redirect all RX traffic to the (lately introduced) "Drop RQ" and then close only the RX/TX rings, leaving the TIRs, TISs and flow tables alive. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-06net/mlx5_core: Introduce access function to modify RSS/LRO paramsAchiad Shochat1-1/+8
To be used by the mlx5 Eth driver in following commit. This is in preparation for netdev "light-weight" open/stop flow change described in previous commit. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net/mlx5e: TX latency optimization to save DMA readsAchiad Shochat1-1/+3
A regular TX WQE execution involves two or more DMA reads - one to fetch the WQE, and another one per WQE gather entry. These DMA reads obviously increase the TX latency. There are two mlx5 mechanisms to bypass these DMA reads: 1) Inline WQE 2) Blue Flame (BF) An inline WQE contains a whole packet, thus saves the DMA read/s of the regular WQE gather entry/s. Inline WQE support was already added in the previous commit. A BF WQE is written directly to the device I/O mapped memory, thus enables saving the DMA read that fetches the WQE. The BF WQE I/O write must be in cache line granularity, thus uses the CPU write combining mechanism. A BF WQE I/O write acts also as a TX doorbell for notifying the device of new TX WQEs. A BF WQE is written to the same I/O mapped address as the regular TX doorbell, thus this address is being mapped twice - once by ioremap() and once by io_mapping_map_wc(). While both mechanisms reduce the TX latency, they both consume more CPU cycles than a regular WQE: - A BF WQE must still be written to host memory, in addition to being written directly to the device I/O mapped memory. - An inline WQE involves copying the SKB data into it. To handle this tradeoff, we introduce here a heuristic algorithm that strives to avoid using these two mechanisms in case the TX queue is being back-pressured by the device, and limit their usage rate otherwise. An inline WQE will always be "Blue Flamed" (written directly to the device I/O mapped memory) while a BF WQE may not be inlined (may contain gather entries). Preliminary testing using netperf UDP_RR shows that the latency goes down from 17.5us to 16.9us, while the message rate (tested with pktgen) stays the same. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net/mlx5e: Allocate DMA coherent memory on reader NUMA nodeSaeed Mahameed1-0/+8
By affinity hints and XPS, each mlx5e channel is assigned a CPU core. Channel DMA coherent memory that is written by the NIC and read by SW (e.g CQ buffer) is allocated on the NUMA node of the CPU core assigned for the channel. Channel DMA coherent memory that is written by SW and read by the NIC (e.g SQ/RQ buffer) is allocated on the NUMA node of the NIC. Doorbell record (written by SW and read by the NIC) is an exception since it is accessed by SW more frequently. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net/mlx5e: Support ETH_RSS_HASH_XORSaeed Mahameed1-3/+3
The ConnectX-4 HW implements inverted XOR8. To make it act as XOR we re-order the HW RSS indirection table. Set XOR to be the default RSS hash function and add ethtool API to control it. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds7-152/+6955
Pull networking updates from David Miller: 1) Add TX fast path in mac80211, from Johannes Berg. 2) Add TSO/GRO support to ibmveth, from Thomas Falcon 3) Move away from cached routes in ipv6, just like ipv4, from Martin KaFai Lau. 4) Lots of new rhashtable tests, from Thomas Graf. 5) Run ingress qdisc lockless, from Alexei Starovoitov. 6) Allow servers to fetch TCP packet headers for SYN packets of new connections, for fingerprinting. From Eric Dumazet. 7) Add mode parameter to pktgen, for testing receive. From Alexei Starovoitov. 8) Cache access optimizations via simplifications of build_skb(), from Alexander Duyck. 9) Move page frag allocator under mm/, also from Alexander. 10) Add xmit_more support to hv_netvsc, from KY Srinivasan. 11) Add a counter guard in case we try to perform endless reclassify loops in the packet scheduler. 12) Extern flow dissector to be programmable and use it in new "Flower" classifier. From Jiri Pirko. 13) AF_PACKET fanout rollover fixes, performance improvements, and new statistics. From Willem de Bruijn. 14) Add netdev driver for GENEVE tunnels, from John W Linville. 15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso. 16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet. 17) Add an ECN retry fallback for the initial TCP handshake, from Daniel Borkmann. 18) Add tail call support to BPF, from Alexei Starovoitov. 19) Add several pktgen helper scripts, from Jesper Dangaard Brouer. 20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa. 21) Favor even port numbers for allocation to connect() requests, and odd port numbers for bind(0), in an effort to help avoid ip_local_port_range exhaustion. From Eric Dumazet. 22) Add Cavium ThunderX driver, from Sunil Goutham. 23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata, from Alexei Starovoitov. 24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai. 25) Double TCP Small Queues default to 256K to accomodate situations like the XEN driver and wireless aggregation. From Wei Liu. 26) Add more entropy inputs to flow dissector, from Tom Herbert. 27) Add CDG congestion control algorithm to TCP, from Kenneth Klette Jonassen. 28) Convert ipset over to RCU locking, from Jozsef Kadlecsik. 29) Track and act upon link status of ipv4 route nexthops, from Andy Gospodarek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits) bridge: vlan: flush the dynamically learned entries on port vlan delete bridge: multicast: add a comment to br_port_state_selection about blocking state net: inet_diag: export IPV6_V6ONLY sockopt stmmac: troubleshoot unexpected bits in des0 & des1 net: ipv4 sysctl option to ignore routes when nexthop link is down net: track link-status of ipv4 nexthops net: switchdev: ignore unsupported bridge flags net: Cavium: Fix MAC address setting in shutdown state drivers: net: xgene: fix for ACPI support without ACPI ip: report the original address of ICMP messages net/mlx5e: Prefetch skb data on RX net/mlx5e: Pop cq outside mlx5e_get_cqe net/mlx5e: Remove mlx5e_cq.sqrq back-pointer net/mlx5e: Remove extra spaces net/mlx5e: Avoid TX CQE generation if more xmit packets expected net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq() net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device ...
2015-06-11net/mlx5e: Add HW cacheline start paddingSaeed Mahameed1-0/+4
Enable HW cacheline start padding and align RX WQE size to cacheline while considering HW start padding. Also, fix dma_unmap call to use the correct SKB data buffer size. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11net/mlx5e: Fix HW MTU settingsSaeed Mahameed1-5/+5
Previously we configured HW MTU to be netdev->mtu, actually we need to configure netdev->mtu + (ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN). Also, query MTU can not fail, hence make the relevant helper a void functionm, add mlx5e_set_dev_port_mtu, helper function to handle MTU setting. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-07net/mlx5_core: Fix static checker warnings around system guid query flowMajd Dibbiny1-1/+1
Fix static checker warnings in the flow of system guid query. Fixes: 707c4602cda6 ('net/mlx5_core: Add new query HCA vport commands') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04net/mlx5_core: Add more query port helpersMajd Dibbiny1-0/+8
Add the following helpers: 1. mlx5_query_port_proto_oper -- queries the port speed port mask 2. mlx5_query_port_link_width_oper - queries the port link with bitmask 3. mlx5_query_port_vl_hw_cap - queries the Virtual Lanes supported on this port These helpers will be used from the IB driver when working in ISSI > 0 mode. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04net/mlx5_core: Use port number when querying port ptysMajd Dibbiny1-1/+1
Until now, mlx5_query_port_ptys always queried port number one. Added new argument in the function's prototype so we can also query the second port. This will be needed when thr helper will be invoked from the IB driver on non FPP (Function-Per-Port) devices. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04net/mlx5_core: Use port number in the query port mtu helpersMajd Dibbiny1-2/+4
Extend the function prototypes for max and operational mtu to take the local port number. In the Ethernet driver is this hard coded to one, since ConnectX4 Ethernet devices are always function-per-port. The IB driver also serves older devices (ConnectIB) which isn't such, and hence the part can vary. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04net/mlx5_core: Get vendor-id using the query adapter commandMajd Dibbiny2-2/+6
Add two wrapper functions to the query adapter command: 1. mlx5_query_board_id -- replaces the old mlx5_cmd_query_adapter. 2. mlx5_core_query_vendor_id -- retrieves the vendor_id from the query_adapter command. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04net/mlx5_core: Add new query HCA vport commandsMajd Dibbiny4-8/+87
Added the implementation for the following commands: 1. QUERY_HCA_VPORT_GID 2. QUERY_HCA_VPORT_PKEY 3. QUERY_HCA_VPORT_CONTEXT They will be needed when we move to work with ISSI > 0 in the IB driver too. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04net/mlx5_core: Make the vport helpers available for the IB driver tooMajd Dibbiny1-0/+41
Move the vport header file to be under include/linux/mlx5, such that the mlx5 IB can use it as well. Also add nic_ prefix to the vport NIC commands to differeniate between HCA vport commands and NIC vport commands. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04net/mlx5_core: Enable XRCs and SRQs when using ISSI > 0Haggai Abramonvsky2-7/+15
When working in ISSI > 0 mode, the model exposed by the device for XRCs and SRQs is different. XRCs use XRC SRQs and plain SRQs are based on RPM (Receive Memory Pool). Add helper functions to create, modify, query, and arm XRC SRQs and RMPs. Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02IB/core cleanup: Add const on args - device->process_madIra Weiny1-1/+1
The process_mad device function declares some parameters as "in". Make those parameters const and adjust the call tree under process_mad in the various drivers accordingly. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-30net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionalityAmir Vadai2-0/+20
This is the Ethernet part of the driver for the Mellanox ConnectX(R)-4 Single/Dual-Port Adapter supporting 100Gb/s with VPI. The driver extends the existing mlx5 driver with Ethernet functionality. This patch contains the driver entry points but does not include transmit and receive (see the previous patch in the series) routines. It also adds the option MLX5_CORE_EN to Kconfig to enable/disable the Ethernet functionality. Currently, Kconfig is programmed to make Ethernet and Infiniband functionality mutally exclusive. Also changed MLX5_INFINIBAND to be depandant on MLX5_CORE instead of selecting it, since MLX5_CORE could be selected without MLX5_INFINIBAND being selected. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net/mlx5: Ethernet resource handling filesAmir Vadai1-0/+54
This patch contains the resource handling files: - flow_table.c: This file contains the code to handle the low level API to configure hardware flow table. It is separated from the flow_table_en.c, because it will be used in the future by Raw Ethernet QP in mlx5_ib too. - en_flow_table.[ch]: Ethernet flow steering handling. The flow table object contain a mapping between flow specs and TIRs. This mechanism will be used also to configure e-switch in the future, when SR-IOV support will be added. - transobj.[ch] - Low level functions to create/modify/destroy the transport objects: RQ/SQ/TIR/TIS - vport.[ch] - Handle attributes of a virtual port (vPort) in the embedded switch. Currently this switch is a passthrough, until SR-IOV support will be added. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net/mlx5_core: Set/Query port MTU commandsSaeed Mahameed1-0/+4
Introduce set/Query low level functions to access MTU in hardware. To be used by the netdev. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net/mlx5_core: Modify CQ moderation parametersRana Shahout1-0/+3
Introduce mlx5_core_modify_cq_moderation() to be used by the netdev, to set hardware coalescing. Signed-off-by: Rana Shahout <ranas@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net/mlx5_core: Implement get/set port statusRana Shahout1-0/+8
Implemet get/set port status low level functions to be exposed by the netdev. Signed-off-by: Rana Shahout <ranas@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net/mlx5_core: Implement access functions of ptys register fieldsSaeed Mahameed1-0/+14
Those registers will be used by the ethtool to set/get settings. Signed-off-by: Rana Shahout <ranas@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net/mlx5_core: New device capabilities handlingSaeed Mahameed2-59/+65
- Query all supported types of dev caps on driver load. - Store the Cap data outbox per cap type into driver private data. - Introduce new Macros to access/dump stored caps (using the auto generated data types). - Obsolete SW representation of dev caps (no need for SW copy for each cap). - Modify IB driver to use new macros for checking caps. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net/mlx5_core: HW data structs/types definitions cleanupSaeed Mahameed4-81/+6631
mlx5_ifc.h was heavily modified here since it is now generated by a script from the device specification (PRM rev 0.25). This specification is backward compatible to existing hardware. Some structures/fields were added here in order to enable the Ethernet functionality of the driver. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net/mlx5_core: Set irq affinity hintsSaeed Mahameed1-3/+8
Preparation for upcoming ethernet driver. - Move msix array from eq_table struct to priv since its not related to eq_table - Intorduce irq_info struct to hold all irq information - Move name from mlx5_eq to irq_info struct since it is irq property. - Set IRQ affinity hints Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Rana Shahout <ranas@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net/mlx5_core,mlx5_ib: Do not use vmap() on coherent memoryAmir Vadai1-8/+1
As David Daney pointed in mlx4_core driver [1], mlx5_core is also misusing the DMA-API. This patch is removing the code that vmap() memory allocated by dma_alloc_coherent(). After this patch, users of this drivers might fail allocating resources on memory fragmeneted systems. This will be fixed later on. [1] - https://patchwork.ozlabs.org/patch/458531/ CC: David Daney <david.daney@cavium.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Extend struct mlx5_interface to support multiple protocolsSaeed Mahameed1-0/+8
Preparation for ethernet driver. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Modify arm CQ in preparation for upcoming Ethernet driverSaeed Mahameed1-2/+3
Pass consumer index as a parameter to arm CQ Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Move completion eqs from mlx5_ib to mlx5_coreSaeed Mahameed1-1/+2
Preparation for ethernet driver. These functions will be used in drivers other than mlx5_ib. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Fix Mellanox copyright noteSaeed Mahameed8-8/+8
Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Use coherent memory for command interface pageEli Cohen1-0/+3
Use coherent memory for the commands descriptor page. Take measures to make sure the page is aligned to MLX5_ADAPTER_PAGE_SIZE as required by the hardware. Reported-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-15IB/mlx5: Handle page faultsHaggai Eran1-0/+7
This patch implement a page fault handler (leaving the pages pinned as of time being). The page fault handler handles initiator and responder page faults for UD/RC transports, for send/receive operations, as well as RDMA read/write initiator support. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/mlx5: Page faults handling infrastructureHaggai Eran1-1/+1
* Refactor MR registration and cleanup, and fix reg_pages accounting. * Create a work queue to handle page fault events in a kthread context. * Register a fault handler to get events from the core for each QP. The registered fault handler is empty in this patch, and only a later patch implements it. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/mlx5: Add mlx5_ib_update_mtt to update page tables after creationHaggai Eran1-0/+1
The new function allows updating the page tables of a memory region after it was created. This can be used to handle page faults and page invalidations. Since mlx5_ib_update_mtt will need to work from within page invalidation, so it must not block on memory allocation. It employs an atomic memory allocation mechanism that is used as a fallback when kmalloc(GFP_ATOMIC) fails. In order to reuse code from mlx5_ib_populate_pas, the patch splits this function and add the needed parameters. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/mlx5: Changes in memory region creation to support on-demand pagingHaggai Eran1-0/+3
This patch wraps together several changes needed for on-demand paging support in the mlx5_ib_populate_pas function, and when registering memory regions. * Instead of accepting a UMR bit telling the function to enable all access flags, the function now accepts the access flags themselves. * For on-demand paging memory regions, fill the memory tables from the correct list, and enable/disable the access flags per-page according to whether the page is present. * A new bit is set to enable writing of access flags when using the firmware create_mkey command. * Disable contig pages when on-demand paging is enabled. In addition the patch changes the UMR code to use PTR_ALIGN instead of our own macro. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15mlx5_core: Add support for page faults events and low level handlingHaggai Eran3-1/+120
* Add a handler function pointer in the mlx5_core_qp struct for page fault events. Handle page fault events by calling the handler function, if not NULL. * Add on-demand paging capability query command. * Export command for resuming QPs after page faults. * Add various constants related to paging support. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.