aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/mtd/rawnand.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-07-13Merge tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds1-0/+36
Pull MTD updates from Miquel Raynal: "This contains the following changes for MTD: MTD core changes: - New Hyperbus framework - New _is_locked (concat) implementation - Various cleanups NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: - fix BCH ECC layout for large page NAND parts - fallback to detected ecc-strength, ecc-step-size - when oops in progress use pio and interrupt polling - code refactor code to introduce helper functions - add support for v7.3 controller - FSMC: - use nand_op_trace for operation tracing - GPMI: - move all driver code into single file - various cleanups (including dmaengine changes) - use runtime PM to manage clocks - implement exec_op - MTK: - correct low level time calculation of r/w cycle - improve data sampling timing for read cycle - add validity check for CE# pin setting - fix wrongly assigned OOB buffer pointer issue - re-license MTK NAND driver as Dual MIT/GPL - STM32: - manage the get_irq error case - increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control" * tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits) mtd: concat: implement _is_locked mtd operation mtd: concat: refactor concat_lock/concat_unlock mtd: abi: do not use C++ style comments in uapi header mtd: afs: remove unneeded NULL check mtd: rawnand: stm32_fmc2: increase DMA completion timeouts mtd: rawnand: Use kzalloc() instead of kmalloc() and memset() mtd: hyperbus: Add driver for TI's HyperBus memory controller mtd: spinand: read returns badly if the last page has bitflips mtd: spinand: Add initial support for Paragon PN26G0xA mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL mtd: rawnand: gpmi: remove double assignment to block_size dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support mtd: rawnand: brcmnand: Add support for v7.3 controller mtd: rawnand: brcmnand: Refactored code to introduce helper functions mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling mtd: Add flag to indicate panic_write mtd: rawnand: Add Macronix NAND read retry support mtd: onenand: Avoid fall-through warnings mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG mtd: spinand: Add support for two-byte device IDs ...
2019-06-27mtd: rawnand: export NAND operation tracerSascha Hauer1-0/+36
The NAND core has a NAND operation tracing function, but it can only be used by drivers using the generic option parser from the NAND core. Export the tracing function as a static inline function in rawnand.h so that drivers implementing exec_op directly do not have to write their own operation tracing. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-18mtd: nand: Make flags for bad block marker position more granularFrieder Schrempf1-0/+1
To be able to check and set bad block markers in the first and second page of a block independently of each other, we create separate flags for both cases. Previously NAND_BBM_SECONDPAGE meant, that both, the first and the second page were used. With this patch NAND_BBM_FIRSTPAGE stands for using the first page and NAND_BBM_SECONDPAGE for using the second page. This patch is only for preparation of subsequent changes and does not implement the logic to actually handle both flags separately. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: Always store info about bad block markers in chip structFrieder Schrempf1-1/+15
The information about where the manufacturer puts the bad block markers inside the bad block and in the OOB data is stored in different places. Let's move this information to nand_chip.options and nand_chip.badblockpos. As this chip-specific information is not directly related to the bad block table (BBT), we also rename the flags to NAND_BBM_*. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: constify elements of NAND_OP_PARSER(_PATTERN)Masahiro Yamada1-2/+2
Currently, drivers are able to constify a nand_op_parser array, but not nand_op_parser_pattern and nand_op_parser_pattern_elem since they are instantiated by using the NAND_OP_PARSER(_PATTERN). Add 'const' to them in order to move more driver data from .data to .rodata section. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: Fix sphinx syntaxJonathan Neuschäfer1-2/+2
Sphinx doesn't handle expressions in identifier references. This fixes the following warnings: ./include/linux/mtd/rawnand.h:1184: WARNING: Inline strong start-string without end-string. ./include/linux/mtd/rawnand.h:1186: WARNING: Inline strong start-string without end-string. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-08mtd: rawnand: Get rid of chip->ecc_{strength,step}_dsBoris Brezillon1-8/+0
nand_device embeds a nand_ecc_req object which contains the minimum strength and step-size required by the NAND device. Drop the chip->ecc_{strength,step}_ds fields and use chip->base.eccreq.{strength,step_size} instead. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Get rid of chip->numchipsBoris Brezillon1-4/+3
The same information is provided by nanddev_ntargets(). Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Get rid of chip->chipsizeBoris Brezillon1-2/+0
The target size can now be returned by nanddev_get_targetsize(). Get rid of the chip->chipsize field and use this helper instead. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-08mtd: rawnand: Get rid of chip->bits_per_cellBoris Brezillon1-4/+2
Now that we inherit from nand_device, we can use nand_device->memorg.bits_per_cell instead of having our own field at the nand_chip level. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Use nanddev_mtd_max_bad_blocks()Boris Brezillon1-5/+0
nanddev_mtd_max_bad_blocks() is implemented by the generic NAND layer and is already doing what we need. Reuse this function instead of having our own implementation. While at it, get rid of the ->max_bb_per_die and ->blocks_per_die fields which are now unused. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Move all page cache related fields to a sub-structBoris Brezillon1-7/+11
Looking at the field names it's hard to tell what ->data_buf, ->pagebuf and ->pagebuf_bitflips are for. Clarify that by moving those fields in a sub-struct named pagecache. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Provide a helper to get chip->data_bufBoris Brezillon1-0/+21
We plan to move cache related fields to a pagecache struct in nand_chip but some drivers access ->pagebuf directly to invalidate the cache before they start using ->data_buf. Let's provide an helper that returns a pointer to ->data_buf after invalidating the cache. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Prepare things to reuse the generic NAND layerBoris Brezillon1-4/+6
The generic NAND layer provides abstraction of NAND devices no matter the bus that is used to communicate with the chip. Basing the raw NAND core on this generic layer should avoid duplication of common operations, like iterating over all pages/blocks for MTD IO/erase operations. In order to re-use this layer, we must first inherit from nand_device and then initialize the nand_device struct appropriately. This patch is taking care of the former. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Use nand_to_mtd() in nand_{set,get}_flash_node()Boris Brezillon1-11/+11
Use the nand_to_mtd() helper to access chip->mtd as done everywhere else. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-02-05mtd: rawnand: remove ->legacy.erase and single_erase()Masahiro Yamada1-2/+0
Now that the last user of this hook, denali.c, stopped using it, we can remove the erase hook from nand_legacy. I squashed single_erase() because only the difference between single_erase() and nand_erase_op() is the number of bit shifts. The status/ret conversion in nand_erase_nand() is unneeded since commit eb94555e9e97 ("mtd: nand: use usual return values for the ->erase() hook"). Cleaned it up now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: Simplify the lockingBoris Brezillon1-15/+9
nand_get_device() was complex for apparently no good reason. Let's replace this locking scheme with 2 mutexes: one attached to the controller and another one attached to the chip. Every time the core calls nand_get_device(), it will first lock the chip and if the chip is not suspended, will then lock the controller. nand_release_device() will release both lock in the reverse order. nand_get_device() can sleep, just like the previous implementation, which means you should never call that from an atomic context. We also get rid of - the chip->state field, since all it was used for was flagging the chip as suspended. We replace it by a field called chip->suspended and directly set it from nand_suspend/resume() - the controller->wq and controller->active fields which are no longer needed since the new controller->lock (now a mutex) guarantees that all operations are serialized at the controller level - panic_nand_get_device() which would anyway be a no-op. Talking about panic write, I keep thinking the rawnand implementation is unsafe because there's not negotiation with the controller to know when it's actually done with it's previous operation. I don't intend to fix that here, but that's probably something we should look at, or maybe we should consider dropping the ->_panic_write() implementation Last important change to mention: we now return -EBUSY when someone tries to access a device that as been suspended, and propagate this error to the upper layer. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: Deprecate the dummy_controller fieldBoris Brezillon1-3/+3
We try to force NAND controller drivers to properly separate the NAND controller object from the NAND chip one, so let's deprecate the dummy controller object embedded in nand_chip to encourage them to create their own instance. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: Move ->setup_data_interface() to nand_controller_opsBoris Brezillon1-6/+14
->setup_data_interface() is a controller specific method and should thus be placed in nand_controller_ops. In order to make that work with controllers that support keeping pre-configured timings we need to add a new NAND_KEEP_TIMINGS flag to inform the core it should skip the timings selection step. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: Move the ->exec_op() method to nand_controller_opsBoris Brezillon1-50/+49
->exec_op() is a controller method and has nothing to do in the nand_chip struct. Let's move it to the nand_controller_ops struct and adjust the core and drivers accordingly. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: Deprecate the ->select_chip() hookBoris Brezillon1-2/+2
Now that the CS line to be selected is passed to ->exec_op() and stored in chip->cur_cs and after patching all drivers implementing ->exec_op() to stop implementing this method, we can deprecate it by moving it to the nand_legacy structure. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: Pass the CS line to be selected in struct nand_operationBoris Brezillon1-1/+10
In order to deprecate the ->select_chip hook we need to pass the CS line a NAND operations are targeting. This is done through the addition of a cs field to the nand_operation struct. We also need to keep track of the currently selected target to properly initialize op->cs, hence the ->cur_cs field addition to the nand_chip struct. Note that op->cs is not assigned in nand_exec_op() because we might rework the way we execute NAND operations in the future (adopt a queuing mechanism instead of the serialization we have right now). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: Add nand_[de]select_target() helpersBoris Brezillon1-1/+4
Add a wrapper to prevent drivers and core code from directly calling the ->select_chip hook which we are about to deprecate. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: Remove unused NAND_CONTROLLER_ALLOC flagBoris Brezillon1-4/+0
Looks like NAND_CONTROLLER_ALLOC has been introduced a long time ago back when the dummy nand_hw_ctrl object was dynamically allocated instead of being embedded in nand_chip. We can safely get rid of this unused flag. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: Move nand_exec_op() to internal.hBoris Brezillon1-9/+0
nand_exec_op() is only used by core code (nand_xxx.c files). Let's move this inline function in drivers/mtd/nand/raw/internals.h. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-11-05mtd: rawnand: Provide helper for polling GPIO R/B pinJanusz Krzysztofik1-0/+4
Each controller driver having access to NAND R/B pin over GPIO would have to reimplement the polling loop otherwise. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Allow selection of ECC byte ordering at runtimeBoris Brezillon1-0/+6
Currently, the selection of ECC byte ordering for software hamming is done at compilation time, which doesn't make sense when ECC byte calculation is done in hardware and byte ordering is forced by the hardware engine. In this case, only the correction is done in software and we want to force the byte-ordering no matter the value of CONFIG_MTD_NAND_ECC_SMC. This is typically the case for the FSMC (Smart Media ordering), TMIO and TXX9NDFMC (regular byte ordering) blocks. For all other use cases (pure software implementation, SM FTL and nandecctest), we keep selecting the byte ordering based on the CONFIG_MTD_NAND_ECC_SMC value. It might not be ideal for SM FTL (I'd expect Smart Media ordering to be employed by the Smart Media FTL), but this option doesn't seem to be enabled in the existing _defconfig, so I can't tell setting sm_order to true is the right choice. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Move JEDEC code to nand_jedec.cBoris Brezillon1-78/+1
This moves JEDEC related code to nand_jedec.c and JEDEC related struct/macros to include/linux/mtd/jedec.h. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Move ONFI code to nand_onfi.cBoris Brezillon1-163/+1
This moves ONFI related code to nand_onfi.c and ONFI related struct/macros to include/linux/mtd/onfi.h. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Keep all internal stuff privateBoris Brezillon1-96/+0
A lot of things defined in rawnand.h should not be exposed to NAND controller drivers and should only be shared by core files. Create the drivers/mtd/nand/raw/internals.h header to store such definitions, and move all private defs to this header. Also remove EXPORT_SYMBOLS() on functions that are not supposed to be exposed. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Inline onfi_get_async_timing_mode()Boris Brezillon1-9/+0
onfi_get_async_timing_mode() is only used in one place inside nand_base.c. Let's inline the code and kill the helper. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Move platform_nand_xxx definitions out of rawnand.hBoris Brezillon1-60/+0
platform_nand_xxx definitions are just used by the plat_nand driver. Let's move those definitions out of the core/driver-agnostic rawnand.h header. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Get rid of a few unused definitionsBoris Brezillon1-8/+0
Those definitions are not used, let's remove them. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Get rid of the duplicate nand_chip forward declarationBoris Brezillon1-3/+0
There's already a forward declaration of nand_chip at the beginning of the file. Get rid of this one. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Get rid of nand_flash_dev forward declationBoris Brezillon1-1/+0
nand_scan[with_ids]() have been moved at the end of the file. We can now get rid of of the nand_flash_dev forward declaration. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Move function prototypes after struct declarationsBoris Brezillon1-12/+12
Move nand_scan[_with_ids]() and nand_wait_ready() at the end of the file where all function prototype lies. This will also allow us to get rid of the nand_flash_dev forward declaration. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->chip_delayBoris Brezillon1-3/+3
The wait timeouts and delays are directly extracted from the NAND timings and ->chip_delay is only used in legacy path, so let's move it to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->{set,get}_features() hooksBoris Brezillon1-6/+6
Those hooks should be replaced by a proper ->exec_op() implementation. Move them to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->erase()Boris Brezillon1-2/+2
The ->erase() hook have been overloaded by some drivers for bad reasons: either the driver was not fitting in the NAND framework and should have been an MTD driver (docg4), or the driver uses a specific path for the ERASE operation (denali), instead of implementing it generically. In any case, we should discourage people from overloading this method and encourage them to implement ->exec_op() instead. Move the ->erase() hook to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->block_{bad,markbad}() hooksBoris Brezillon1-4/+5
Those hooks have been overloaded by some drivers for bad reasons: either the driver was not fitting in the NAND framework and should have been an MTD driver (docg4), or it was not properly implementing the OOB read/write request or had a weird layout where BBM are trashed. In any case, we should discourage people from overloading those methods and encourage them to fix their driver instead. Move the ->block_{bad,markbad}() hooks to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->dev_ready() and ->waitfunc()Boris Brezillon1-10/+8
Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->cmd_ctrl() and ->cmdfunc()Boris Brezillon1-11/+10
Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->{read, write}_{byte, buf}() hooksBoris Brezillon1-11/+10
All those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Create a legacy struct and move ->IO_ADDR_{R, W} thereBoris Brezillon1-6/+20
We regularly have new NAND controller drivers that are making use of fields/hooks that we want to get rid of but can't because of all the legacy drivers that we might break if we do. So, instead of removing those fields/hooks, let's move them to a sub-struct which is clearly documented as deprecated. We start with the ->IO_ADDR_{R,W] fields. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Make maxchips an unsigned intBoris Brezillon1-2/+2
There's no good reason to make maxchips a signed integer, since only positive values are valid. Make it an unsigned int. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object nand_erase_nand()Boris Brezillon1-1/+1
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the nand_erase_nand() helper. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to all nand_xxx_bbt() helpersBoris Brezillon1-3/+3
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the nand_xxx_bbt() helpers. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->setup_data_interface()Boris Brezillon1-1/+1
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->setup_data_interface() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->setup_read_retry()Boris Brezillon1-1/+1
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->setup_read_retry() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.