aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/netdevice.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-01-03net: remove the check argument from __skb_gro_checksum_convertLi RongQing1-3/+3
The argument is always ignored, so remove it. Signed-off-by: Li RongQing <lirongqing@baidu.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller1-0/+1
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Remove #ifdef pollution around nf_ingress(), from Lukas Wunner. 2) Document ingress hook in netdevice, also from Lukas. 3) Remove htons() in tunnel metadata port netlink attributes, from Xin Long. 4) Missing erspan netlink attribute validation also from Xin Long. 5) Missing erspan version in tunnel, from Xin Long. 6) Missing attribute nest in NFTA_TUNNEL_KEY_OPTS_{VXLAN,ERSPAN} Patch from Xin Long. 7) Missing nla_nest_cancel() in tunnel netlink dump path, from Xin Long. 8) Remove two exported conntrack symbols with no clients, from Florian Westphal. 9) Add nft_meta_get_eval_time() helper to nft_meta, from Florian. 10) Add nft_meta_pkttype helper for loopback, also from Florian. 11) Add nft_meta_socket uid helper, from Florian Westphal. 12) Add nft_meta_cgroup helper, from Florian. 13) Add nft_meta_ifkind helper, from Florian. 14) Group all interface related meta selector, from Florian. 15) Add nft_prandom_u32() helper, from Florian. 16) Add nft_meta_rtclassid helper, from Florian. 17) Add support for matching on the slave device index, from Florian. This batch, among other things, contains updates for the netfilter tunnel netlink interface: This extension is still incomplete and lacking proper userspace support which is actually my fault, I did not find the time to go back and finish this. This update is breaking tunnel UAPI in some aspects to fix it but do it better sooner than never. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27ethtool: support for netlink notificationsMichal Kubecek1-0/+9
Add infrastructure for ethtool netlink notifications. There is only one multicast group "monitor" which is used to notify userspace about changes and actions performed. Notification messages (types using suffix _NTF) share the format with replies to GET requests. Notifications are supposed to be broadcasted on every configuration change, whether it is done using the netlink interface or ioctl one. Netlink SET requests only trigger a notification if some data is actually changed. To trigger an ethtool notification, both ethtool netlink and external code use ethtool_notify() helper. This helper requires RTNL to be held and may sleep. Handlers sending messages for specific notification message types are registered in ethnl_notify_handlers array. As notifications can be triggered from other code, ethnl_ok flag is used to prevent an attempt to send notification before genetlink family is registered. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: sch_ets: Make the ETS qdisc offloadablePetr Machata1-0/+1
Add hooks at appropriate points to make it possible to offload the ETS Qdisc. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17net: fix kernel-doc warning in <linux/netdevice.h>Randy Dunlap1-1/+1
Fix missing '*' kernel-doc notation that causes this warning: ../include/linux/netdevice.h:1779: warning: bad line: spinlock Fixes: ab92d68fc22f ("net: core: add generic lockdep keys") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17netfilter: Document ingress hookLukas Wunner1-0/+1
Amend kerneldoc of struct net_device to fix a "make htmldocs" warning: include/linux/netdevice.h:2045: warning: Function parameter or member 'nf_hooks_ingress' not described in 'net_device' Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-12-12netdev: pass the stuck queue to the timeout handlerMichael S. Tsirkin1-2/+3
This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Martin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07inet: protect against too small mtu values.Eric Dumazet1-0/+5
syzbot was once again able to crash a host by setting a very small mtu on loopback device. Let's make inetdev_valid_mtu() available in include/net/ip.h, and use it in ip_setup_cork(), so that we protect both ip_append_page() and __ip_append_data() Also add a READ_ONCE() when the device mtu is read. Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(), even if other code paths might write over this field. Add a big comment in include/linux/netdevice.h about dev->mtu needing READ_ONCE()/WRITE_ONCE() annotations. Hopefully we will add the missing ones in followup patches. [1] refcount_t: saturated; leaking memory. WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x3e kernel/panic.c:582 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89 RSP: 0018:ffff88809689f550 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1 R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001 R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40 refcount_add include/linux/refcount.h:193 [inline] skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999 sock_wmalloc+0xf1/0x120 net/core/sock.c:2096 ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383 udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276 inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821 kernel_sendpage+0x92/0xf0 net/socket.c:3794 sock_sendpage+0x8b/0xc0 net/socket.c:936 pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458 splice_from_pipe_feed fs/splice.c:512 [inline] __splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636 splice_from_pipe+0x108/0x170 fs/splice.c:671 generic_splice_sendpage+0x3c/0x50 fs/splice.c:842 do_splice_from fs/splice.c:861 [inline] direct_splice_actor+0x123/0x190 fs/splice.c:1035 splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990 do_splice_direct+0x1da/0x2a0 fs/splice.c:1078 do_sendfile+0x597/0xd00 fs/read_write.c:1464 __do_sys_sendfile64 fs/read_write.c:1525 [inline] __se_sys_sendfile64 fs/read_write.c:1511 [inline] __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441409 Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409 RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005 RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180 R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-0/+4
Pull rdma updates from Jason Gunthorpe: "Again another fairly quiet cycle with few notable core code changes and the usual variety of driver bug fixes and small improvements. - Various driver updates and bug fixes for siw, bnxt_re, hns, qedr, iw_cxgb4, vmw_pvrdma, mlx5 - Improvements in SRPT from working with iWarp - SRIOV VF support for bnxt_re - Skeleton kernel-doc files for drivers/infiniband - User visible counters for events related to ODP - Common code for tracking of mmap lifetimes so that drivers can link HW object liftime to a VMA - ODP bug fixes and rework - RDMA READ support for efa - Removal of the very old cxgb3 driver" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (168 commits) RDMA/hns: Delete unnecessary callback functions for cq RDMA/hns: Rename the functions used inside creating cq RDMA/hns: Redefine the member of hns_roce_cq struct RDMA/hns: Redefine interfaces used in creating cq RDMA/efa: Expose RDMA read related attributes RDMA/efa: Support remote read access in MR registration RDMA/efa: Store network attributes in device attributes IB/hfi1: remove redundant assignment to variable ret RDMA/bnxt_re: Fix missing le16_to_cpu RDMA/bnxt_re: Fix stat push into dma buffer on gen p5 devices RDMA/bnxt_re: Fix chip number validation Broadcom's Gen P5 series RDMA/bnxt_re: Fix Kconfig indentation IB/mlx5: Implement callbacks for getting VFs GUID attributes IB/ipoib: Add ndo operation for getting VFs GUID attributes IB/core: Add interfaces to get VF node and port GUIDs net/core: Add support for getting VF GUIDs RDMA/qedr: Fix null-pointer dereference when calling rdma_user_mmap_get_offset RDMA/cm: Use refcount_t type for refcount variable IB/mlx5: Support extended number of strides for Striding RQ IB/mlx4: Update HW GID table while adding vlan GID ...
2019-11-22net/core: Add support for getting VF GUIDsDanit Goldberg1-0/+4
Introduce a new ndo: ndo_get_vf_guid, to get from the net device the port and node GUID. New applications can choose to use this interface to show GUIDs with iproute2 with commands such as: - ip link show ib4 ib4: <BROADCAST,MULTICAST> mtu 4092 qdisc noop state DOWN mode DEFAULT group default qlen 256 link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof checking off, NODE_GUID 22:44:33:00:33:11:00:33, PORT_GUID 10:21:33:12:00:11:22:10, link-state disable, trust off, query_rss off Signed-off-by: Danit Goldberg <danitg@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-11-12netfilter: nf_flow_table: hardware offload supportPablo Neira Ayuso1-0/+1
This patch adds the dataplane hardware offload to the flowtable infrastructure. Three new flags represent the hardware state of this flow: * FLOW_OFFLOAD_HW: This flow entry resides in the hardware. * FLOW_OFFLOAD_HW_DYING: This flow entry has been scheduled to be remove from hardware. This might be triggered by either packet path (via TCP RST/FIN packet) or via aging. * FLOW_OFFLOAD_HW_DEAD: This flow entry has been already removed from the hardware, the software garbage collector can remove it from the software flowtable. This patch supports for: * IPv4 only. * Aging via FLOW_CLS_STATS, no packet and byte counter synchronization at this stage. This patch also adds the action callback that specifies how to convert the flow entry into the flow_rule object that is passed to the driver. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07net: use u64_stats_t in struct pcpu_lstatsEric Dumazet1-4/+4
In order to fix the data-race found by KCSAN, we can use the new u64_stats_t type and its accessors instead of plain u64 fields. This will still generate optimal code for both 32 and 64 bit platforms. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07net: provide dev_lstats_add() helperEric Dumazet1-0/+10
Many network drivers need it and hand-coded the same function. In order to ease u64_stats_t adoption, it is time to factorize. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07net: provide dev_lstats_read() helperEric Dumazet1-0/+2
Many network drivers use hand-coded implementation of the same thing, let's factorize things so that u64_stats_t adoption is done once. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-34/+26
The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: remove unnecessary variables and callbackTaehee Yoo1-12/+0
This patch removes variables and callback these are related to the nested device structure. devices that can be nested have their own nest_level variable that represents the depth of nested devices. In the previous patch, new {lower/upper}_level variables are added and they replace old private nest_level variable. So, this patch removes all 'nest_level' variables. In order to avoid lockdep warning, ->ndo_get_lock_subclass() was added to get lockdep subclass value, which is actually lower nested depth value. But now, they use the dynamic lockdep key to avoid lockdep warning instead of the subclass. So, this patch removes ->ndo_get_lock_subclass() callback. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: core: add ignore flag to netdev_adjacent structureTaehee Yoo1-0/+10
In order to link an adjacent node, netdev_upper_dev_link() is used and in order to unlink an adjacent node, netdev_upper_dev_unlink() is used. unlink operation does not fail, but link operation can fail. In order to exchange adjacent nodes, we should unlink an old adjacent node first. then, link a new adjacent node. If link operation is failed, we should link an old adjacent node again. But this link operation can fail too. It eventually breaks the adjacent link relationship. This patch adds an ignore flag into the netdev_adjacent structure. If this flag is set, netdev_upper_dev_link() ignores an old adjacent node for a moment. This patch also adds new functions for other modules. netdev_adjacent_change_prepare() netdev_adjacent_change_commit() netdev_adjacent_change_abort() netdev_adjacent_change_prepare() inserts new device into adjacent list but new device is not allowed to use immediately. If netdev_adjacent_change_prepare() fails, it internally rollbacks adjacent list so that we don't need any other action. netdev_adjacent_change_commit() deletes old device in the adjacent list and allows new device to use. netdev_adjacent_change_abort() rollbacks adjacent list. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: core: add generic lockdep keysTaehee Yoo1-22/+13
Some interface types could be nested. (VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..) These interface types should set lockdep class because, without lockdep class key, lockdep always warn about unexisting circular locking. In the current code, these interfaces have their own lockdep class keys and these manage itself. So that there are so many duplicate code around the /driver/net and /net/. This patch adds new generic lockdep keys and some helper functions for it. This patch does below changes. a) Add lockdep class keys in struct net_device - qdisc_running, xmit, addr_list, qdisc_busylock - these keys are used as dynamic lockdep key. b) When net_device is being allocated, lockdep keys are registered. - alloc_netdev_mqs() c) When net_device is being free'd llockdep keys are unregistered. - free_netdev() d) Add generic lockdep key helper function - netdev_register_lockdep_key() - netdev_unregister_lockdep_key() - netdev_update_lockdep_key() e) Remove unnecessary generic lockdep macro and functions f) Remove unnecessary lockdep code of each interfaces. After this patch, each interface modules don't need to maintain their lockdep keys. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: core: limit nested device depthTaehee Yoo1-0/+4
Current code doesn't limit the number of nested devices. Nested devices would be handled recursively and this needs huge stack memory. So, unlimited nested devices could make stack overflow. This patch adds upper_level and lower_level, they are common variables and represent maximum lower/upper depth. When upper/lower device is attached or dettached, {lower/upper}_level are updated. and if maximum depth is bigger than 8, attach routine fails and returns -EMLINK. In addition, this patch converts recursive routine of netdev_walk_all_{lower/upper} to iterator routine. Test commands: ip link add dummy0 type dummy ip link add link dummy0 name vlan1 type vlan id 1 ip link set vlan1 up for i in {2..55} do let A=$i-1 ip link add vlan$i link vlan$A type vlan id $i done ip link del dummy0 Splat looks like: [ 155.513226][ T908] BUG: KASAN: use-after-free in __unwind_start+0x71/0x850 [ 155.514162][ T908] Write of size 88 at addr ffff8880608a6cc0 by task ip/908 [ 155.515048][ T908] [ 155.515333][ T908] CPU: 0 PID: 908 Comm: ip Not tainted 5.4.0-rc3+ #96 [ 155.516147][ T908] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 155.517233][ T908] Call Trace: [ 155.517627][ T908] [ 155.517918][ T908] Allocated by task 0: [ 155.518412][ T908] (stack is not available) [ 155.518955][ T908] [ 155.519228][ T908] Freed by task 0: [ 155.519885][ T908] (stack is not available) [ 155.520452][ T908] [ 155.520729][ T908] The buggy address belongs to the object at ffff8880608a6ac0 [ 155.520729][ T908] which belongs to the cache names_cache of size 4096 [ 155.522387][ T908] The buggy address is located 512 bytes inside of [ 155.522387][ T908] 4096-byte region [ffff8880608a6ac0, ffff8880608a7ac0) [ 155.523920][ T908] The buggy address belongs to the page: [ 155.524552][ T908] page:ffffea0001822800 refcount:1 mapcount:0 mapping:ffff88806c657cc0 index:0x0 compound_mapcount:0 [ 155.525836][ T908] flags: 0x100000000010200(slab|head) [ 155.526445][ T908] raw: 0100000000010200 ffffea0001813808 ffffea0001a26c08 ffff88806c657cc0 [ 155.527424][ T908] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000 [ 155.528429][ T908] page dumped because: kasan: bad access detected [ 155.529158][ T908] [ 155.529410][ T908] Memory state around the buggy address: [ 155.530060][ T908] ffff8880608a6b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 155.530971][ T908] ffff8880608a6c00: fb fb fb fb fb f1 f1 f1 f1 00 f2 f2 f2 f3 f3 f3 [ 155.531889][ T908] >ffff8880608a6c80: f3 fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 155.532806][ T908] ^ [ 155.533509][ T908] ffff8880608a6d00: fb fb fb fb fb fb fb fb fb f1 f1 f1 f1 00 00 00 [ 155.534436][ T908] ffff8880608a6d80: f2 f3 f3 f3 f3 fb fb fb 00 00 00 00 00 00 00 00 [ ... ] Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-08Revert "tun: call dev_get_valid_name() before register_netdevice()"Eric Dumazet1-3/+0
This reverts commit 0ad646c81b2182f7fa67ec0c8c825e0ee165696d. As noticed by Jakub, this is no longer needed after commit 11fc7d5a0a2d ("tun: fix memory leak in error path") This no longer exports dev_get_valid_name() for the exclusive use of tun driver. Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-02net: introduce per-netns netdevice notifiersJiri Pirko1-0/+3
Often the code for example in drivers is interested in getting notifier call only from certain network namespace. In addition to the existing global netdevice notifier chain introduce per-netns chains and allow users to register to that. Eventually this would eliminate unnecessary overhead in case there are many netdevices in many network namespaces. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02net: push loops and nb calls into helper functionsJiri Pirko1-0/+3
Push iterations over net namespaces and netdevices from register_netdevice_notifier() and unregister_netdevice_notifier() into helper functions. Along with that introduce continue_reverse macros to make the code a bit nicer allowing to get rid of "last" marks. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: rtnetlink: add linkprop commands to add and delete alternative ifnamesJiri Pirko1-0/+4
Add two commands to add and delete list of link properties. Implement the first property type along - alternative ifnames. Each net device can have multiple alternative names. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: introduce name_node struct to be used in hashlistJiri Pirko1-2/+8
Introduce name_node structure to hold name of device and put it into hashlist instead of putting there struct net_device directly. Add a necessary infrastructure to manipulate the hashlist. This prepares the code to use the same hashlist for alternative names introduced later in this set. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16taprio: Add support for hardware offloadingVinicius Costa Gomes1-0/+1
This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-2/+12
Daniel Borkmann says: ==================== The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add the ability to use unaligned chunks in the AF_XDP umem. By relaxing where the chunks can be placed, it allows to use an arbitrary buffer size and place whenever there is a free address in the umem. Helps more seamless DPDK AF_XDP driver integration. Support for i40e, ixgbe and mlx5e, from Kevin and Maxim. 2) Addition of a wakeup flag for AF_XDP tx and fill rings so the application can wake up the kernel for rx/tx processing which avoids busy-spinning of the latter, useful when app and driver is located on the same core. Support for i40e, ixgbe and mlx5e, from Magnus and Maxim. 3) bpftool fixes for printf()-like functions so compiler can actually enforce checks, bpftool build system improvements for custom output directories, and addition of 'bpftool map freeze' command, from Quentin. 4) Support attaching/detaching XDP programs from 'bpftool net' command, from Daniel. 5) Automatic xskmap cleanup when AF_XDP socket is released, and several barrier/{read,write}_once fixes in AF_XDP code, from Björn. 6) Relicense of bpf_helpers.h/bpf_endian.h for future libbpf inclusion as well as libbpf versioning improvements, from Andrii. 7) Several new BPF kselftests for verifier precision tracking, from Alexei. 8) Several BPF kselftest fixes wrt endianess to run on s390x, from Ilya. 9) And more BPF kselftest improvements all over the place, from Stanislav. 10) Add simple BPF map op cache for nfp driver to batch dumps, from Jakub. 11) AF_XDP socket umem mapping improvements for 32bit archs, from Ivan. 12) Add BPF-to-BPF call and BTF line info support for s390x JIT, from Yauheni. 13) Small optimization in arm64 JIT to spare 1 insns for BPF_MOD, from Jerin. 14) Fix an error check in bpf_tcp_gen_syncookie() helper, from Petar. 15) Various minor fixes and cleanups, from Nathan, Masahiro, Masanari, Peter, Wei, Yue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24net: use unlikely for dql_avail casexiaolinkui1-1/+1
This is an unlikely case, use unlikely() on it seems logical. Signed-off-by: xiaolinkui <xiaolinkui@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17xsk: replace ndo_xsk_async_xmit with ndo_xsk_wakeupMagnus Karlsson1-2/+12
This commit replaces ndo_xsk_async_xmit with ndo_xsk_wakeup. This new ndo provides the same functionality as before but with the addition of a new flags field that is used to specifiy if Rx, Tx or both should be woken up. The previous ndo only woke up Tx, as implied by the name. The i40e and ixgbe drivers (which are all the supported ones) are updated with this new interface. This new ndo will be used by the new need_wakeup functionality of XDP sockets that need to be able to wake up both Rx and Tx driver processing. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-08net: use listified RX for handling GRO_NORMAL skbsEdward Cree1-0/+3
When GRO decides not to coalesce a packet, in napi_frags_finish(), instead of passing it to the stack immediately, place it on a list in the napi struct. Then, at flush time (napi_complete_done(), napi_poll(), or napi_busy_loop()), call netif_receive_skb_list_internal() on the list. We'd like to do that in napi_gro_flush(), but it's not called if !napi->gro_bitmask, so we have to do it in the callers instead. (There are a handful of drivers that call napi_gro_flush() themselves, but it's not clear why, or whether this will affect them.) Because a full 64 packets is an inefficiently large batch, also consume the list whenever it exceeds gro_normal_batch, a new net/core sysctl that defaults to 8. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01loopback: create blackhole net device similar to loopack.Mahesh Bandewar1-0/+2
Create a blackhole net device that can be used for "dead" dst entries instead of loopback device. This blackhole device differs from loopback in few aspects: (a) It's not per-ns. (b) MTU on this device is ETH_MIN_MTU (c) The xmit function is essentially kfree_skb(). and (d) since it's not registered it won't have ifindex. Lower MTU effectively make the device not pass the MTU check during the route check when a dst associated with the skb is dead. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-27net/tls: move definition of tls ops into net/tls.hJakub Kicinski1-22/+1
There seems to be no reason for tls_ops to be defined in netdevice.h which is included in a lot of places. Don't wrap the struct/enum declaration in ifdefs, it trickles down unnecessary ifdefs into driver code. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+3
Conflict resolution of af_smc.c from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10failover: allow name change on IFF_UP slave interfacesSi-Wei Liu1-0/+3
When a netdev appears through hot plug then gets enslaved by a failover master that is already up and running, the slave will be opened right away after getting enslaved. Today there's a race that userspace (udev) may fail to rename the slave if the kernel (net_failover) opens the slave earlier than when the userspace rename happens. Unlike bond or team, the primary slave of failover can't be renamed by userspace ahead of time, since the kernel initiated auto-enslavement is unable to, or rather, is never meant to be synchronized with the rename request from userspace. As the failover slave interfaces are not designed to be operated directly by userspace apps: IP configuration, filter rules with regard to network traffic passing and etc., should all be done on master interface. In general, userspace apps only care about the name of master interface, while slave names are less important as long as admin users can see reliable names that may carry other information describing the netdev. For e.g., they can infer that "ens3nsby" is a standby slave of "ens3", while for a name like "eth0" they can't tell which master it belongs to. Historically the name of IFF_UP interface can't be changed because there might be admin script or management software that is already relying on such behavior and assumes that the slave name can't be changed once UP. But failover is special: with the in-kernel auto-enslavement mechanism, the userspace expectation for device enumeration and bring-up order is already broken. Previously initramfs and various userspace config tools were modified to bypass failover slaves because of auto-enslavement and duplicate MAC address. Similarly, in case that users care about seeing reliable slave name, the new type of failover slaves needs to be taken care of specifically in userspace anyway. It's less risky to lift up the rename restriction on failover slave which is already UP. Although it's possible this change may potentially break userspace component (most likely configuration scripts or management software) that assumes slave name can't be changed while UP, it's relatively a limited and controllable set among all userspace components, which can be fixed specifically to listen for the rename events on failover slaves. Userspace component interacting with slaves is expected to be changed to operate on failover master interface instead, as the failover slave is dynamic in nature which may come and go at any point. The goal is to make the role of failover slaves less relevant, and userspace components should only deal with failover master in the long run. Fixes: 30c8bd5aa8b2 ("net: Introduce generic failover module") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04net: use correct this_cpu primitive in dev_recursion_levelFlorian Westphal1-1/+1
syzbot reports: BUG: using __this_cpu_read() in preemptible code: caller is dev_recursion_level include/linux/netdevice.h:3052 [inline] __this_cpu_preempt_check+0x246/0x270 lib/smp_processor_id.c:47 dev_recursion_level include/linux/netdevice.h:3052 [inline] ip6_skb_dst_mtu include/net/ip6_route.h:245 [inline] I erronously downgraded a this_cpu_read to __this_cpu_read when moving dev_recursion_level() around. Reported-by: syzbot+51471b4aae195285a4a3@syzkaller.appspotmail.com Fixes: 97cdcf37b57e ("net: place xmit recursion in softnet data") Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01net: move skb->xmit_more hint to softnet dataFlorian Westphal1-1/+1
There are two reasons for this. First, the xmit_more flag conceptually doesn't fit into the skb, as xmit_more is not a property related to the skb. Its only a hint to the driver that the stack is about to transmit another packet immediately. Second, it was only done this way to not have to pass another argument to ndo_start_xmit(). We can place xmit_more in the softnet data, next to the device recursion. The recursion counter is already written to on each transmit. The "more" indicator is placed right next to it. Drivers can use the netdev_xmit_more() helper instead of skb->xmit_more to check the "more packets coming" hint. skb->xmit_more is retained (but always 0) to not cause build breakage. This change takes care of the simple s/skb->xmit_more/netdev_xmit_more()/ conversions. Remaining drivers are converted in the next patches. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01net: place xmit recursion in softnet dataFlorian Westphal1-8/+32
This fills a hole in softnet data, so no change in structure size. Also prepares for xmit_more placement in the same spot; skb->xmit_more will be removed in followup patch. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28net: replace ndo_get_devlink with ndo_get_devlink_portJiri Pirko1-3/+3
Follow-up patch is going to need a devlink port instance according to a netdev. Devlink port instance should be always available when devlink is used. So change the recently introduced ndo_get_devlink to ndo_get_devlink_port. With that, adjust the wrapper for the only user to get devlink pointer. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: convert rps_needed and rfs_needed to new static branch apiEric Dumazet1-2/+2
We prefer static_branch_unlikely() over static_key_false() these days. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-20net: remove 'fallback' argument from dev->ndo_select_queue()Paolo Abeni1-8/+4
After the previous patch, all the callers of ndo_select_queue() provide as a 'fallback' argument netdev_pick_tx. The only exceptions are nested calls to ndo_select_queue(), which pass down the 'fallback' available in the current scope - still netdev_pick_tx. We can drop such argument and replace fallback() invocation with netdev_pick_tx(). This avoids an indirect call per xmit packet in some scenarios (TCP syn, UDP unconnected, XDP generic, pktgen) with device drivers implementing such ndo. It also clean the code a bit. Tested with ixgbe and CONFIG_FCOE=m With pktgen using queue xmit: threads vanilla patched (kpps) (kpps) 1 2334 2428 2 4166 4278 4 7895 8100 v1 -> v2: - rebased after helper's name change Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-20packet: rework packet_pick_tx_queue() to use common code selectionPaolo Abeni1-0/+2
Currently packet_pick_tx_queue() is the only caller of ndo_select_queue() using a fallback argument other than netdev_pick_tx. Leveraging rx queue, we can obtain a similar queue selection behavior using core helpers. After this change, ndo_select_queue() is always invoked with netdev_pick_tx() as fallback. We can change ndo_select_queue() signature in a followup patch, dropping an indirect call per transmitted packet in some scenarios (e.g. TCP syn and XDP generic xmit) This changes slightly how af packet queue selection happens when PACKET_QDISC_BYPASS is set. It's now more similar to plan dev_queue_xmit() tacking in account both XPS and TC mapping. v1 -> v2: - rebased after helper name change RFC -> v1: - initialize sender_cpu to the expected value Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-20net: dev: rename queue selection helpers.Paolo Abeni1-3/+3
With the following patches, we are going to use __netdev_pick_tx() in many modules. Rename it to netdev_pick_tx(), to make it clear is a public API. Also rename the existing netdev_pick_tx() to netdev_core_pick_tx(), to avoid name clashes. Suggested-by: Eric Dumazet <edumazet@google.com> Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
2019-02-27net: Remove switchdev_opsFlorian Fainelli1-3/+0
Now that we have converted all possible callers to using a switchdev notifier for attributes we do not have a need for implementing switchdev_ops anymore, and this can be removed from all drivers the net_device structure. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27net: dev: Use unsigned integer as an argument to left-shiftAndy Shevchenko1-1/+1
1 << 31 is Undefined Behaviour according to the C standard. Use U type modifier to avoid theoretical overflow. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-26devlink: create a special NDO for getting the devlink instanceJakub Kicinski1-0/+7
Instead of iterating over all devlink ports add a NDO which will return the devlink instance from the driver. v2: add the netdev_to_devlink() helper (Michal) v3: check that devlink has ops (Florian) v4: hold devlink_mutex (Jiri) Suggested-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24net: dev: add generic protodown handlerAndy Roulin1-0/+1
Introduce dev_change_proto_down_generic, a generic ndo_change_proto_down implementation, which sets the netdev carrier state according to proto_down. This adds the ability to set protodown on vxlan and macvlan devices in a generic way for use by control protocols like VRRPD. Signed-off-by: Andy Roulin <aroulin@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: Introduce parse_protocol header_ops callbackMaxim Mikityanskiy1-0/+10
Introduce a new optional header_ops callback called parse_protocol and a wrapper function dev_parse_header_protocol, similar to dev_parse_header. The new callback's purpose is to extract the protocol number from the L2 header, the format of which is known to the driver, but not to the upper layers of the stack. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-4/+3
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-02-16 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) numerous libbpf API improvements, from Andrii, Andrey, Yonghong. 2) test all bpf progs in alu32 mode, from Jiong. 3) skb->sk access and bpf_sk_fullsock(), bpf_tcp_sock() helpers, from Martin. 4) support for IP encap in lwt bpf progs, from Peter. 5) remove XDP_QUERY_XSK_UMEM dead code, from Jan. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.