aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/phy.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-08-23net: phy: export phy_{read,write}_mmd_indirectFlorian Fainelli1-0/+27
Some PHY drivers might need to access Clause 45 registers in Clause 22 compatibility mode to e.g: properly advertise EEE support when disabled by default. Export these two helper functions: phy_read_mmd_indirect() and phy_write_mmd_indirect() for drivers to use them. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-30net: libphy: Add phy specific function to access mmd phy registersVince Bridgers1-0/+18
libphy was originally written assuming all phy devices support clause 45 access extensions to the mmd registers through the indirection registers located within the first 16 phy registers. This assumption is not true in all cases, and one specific example is the Micrel ksz9021 10/100/1000 Mbps phy. Using the stmmac driver, accessing the mmd registers to query and configure energy efficient Ethernet (EEE) features yielded unexpected behavior. This patch adds mmd access functions to the phy driver that can be overriden by the phy specific driver if the phy does not support this mechanism or uses it's own non-standard access mechanism. By default, the IEEE Compatible clause 45 access mechanism described in clause 22 is used. With this patch, EEE query/configure functions as expected using the stmmac and the Micrel ksz9021 phy. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-21net: phylib: add link_change_notify callback to phy deviceDaniel Mack1-0/+9
Add a notify callback to inform phy drivers when the core is about to do its link adjustment. No change for drivers that do not implement this callback. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-02mdio_bus: implement devm_mdiobus_alloc/devm_mdiobus_freeGrygorii Strashko1-0/+7
Add a resource managed devm_mdiobus_alloc[_size]()/devm_mdiobus_free() to automatically clean up MDIO bus alocations made by MDIO drivers, thus leading to simplified MDIO drivers code. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-20net: phy: export genphy_config_init()Daniel Mack1-0/+1
This enables other drivers to call this generic implementation, and then only do specific details on top of it. Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-16net: phy: add minimal support for QSGMII PHYThomas Petazzoni1-0/+3
This commit adds the necessary definitions for the PHY layer to recognize "qsgmii" as a valid PHY interface. A QSMII interface, as defined at http://en.wikipedia.org/wiki/Media_Independent_Interface#Quad_Serial_Gigabit_Media_Independent_Interface, is "is a method of combining four SGMII lines into a 5Gbit/s interface. QSGMII, like SGMII, uses LVDS signalling for the TX and RX data and a single LVDS clock signal. QSGMII uses significantly fewer signal lines than four SGMII busses." This type of MAC <-> PHY connection might require special handling on the MAC driver side, so it should be possible to express this type of MAC <-> PHY connection, for example in the Device Tree. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: devicetree@vger.kernel.org Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17net: phy: allow PHY drivers to implement their own software resetFlorian Fainelli1-0/+5
As pointed out by Shaohui, most 10G PHYs out there have a non-standard compliant software reset sequence, eventually something much more complex than just toggling the BMCR_RESET bit. Allow PHY driver to implement their own soft_reset() callback to deal with that. If no callback is provided, call into genphy_soft_reset() which makes sure the existing behavior is kept intact. Reported-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17net: phy: move PHY software reset to genphy_soft_resetFlorian Fainelli1-0/+1
As pointed out by Shaohui, this function is generic for 10/100/1000 PHYs, but 10G PHYs might have a slightly different reset sequence which prevents most of them from using this function. Move the BMCR_RESET based software resent sequence to genphy_soft_reset() in preparation for allowing PHY drivers to implement a soft_reset() callback. Reported-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14net: phy: add MoCA PHY typeFlorian Fainelli1-0/+3
Some Ethernet MACs are connected to a MoCA PHY which will handle the low-level job of sending Ethernet frames on the coaxial cable, these Ethernet MACs need to know about it to be properly configured. Add a new PHY mode "moca" and update the Device Tree parsing logic to look for it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12net: phy: add "has_fixups" boolean propertyFlorian Fainelli1-0/+1
Add a boolean property which indicates if the PHY has had any fixup routine ran on it. We are later going to use that boolean to expose it as a sysfs property to help troubleshooting. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12net: phy: re-design phy_modes to be self-containedFlorian Fainelli1-0/+42
of_get_phy_mode() uses a local array to map phy_interface_t values from include/linux/net/phy.h to a string which is read from the 'phy-mode' or 'phy-connection-type' property. In preparation for exposing the PHY interface mode through sysfs, perform the following: - mode phy_modes from drivers/of/of_net.c to include/linux/phy.h such that it is right below the phy_interface_t enum - make it a static inline function returning the string such that we can use it by just including include/linux/net/phy.h - add a PHY_INTERFACE_MODE_MAX enum value to guard the iteration in of_get_phy_mode() Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12net: phy: allow driver to implement their own aneg_doneFlorian Fainelli1-0/+3
Some PHYs out there can be very quirky with respect to how they would report the auto-negotiation is completed. Allow drivers to override the generic aneg_done() implementation by providing their own. Since not all drivers have been updated yet to use genphy_aneg_done() as aneg_done() callback, we explicitely check that this callback is valid before calling into it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12net: phy: add genphy_aneg_done()Florian Fainelli1-0/+1
In preparation for allowing PHY drivers to potentially override their auto-negotiation done callback, move the contents of phy_aneg_done() to genphy_aneg_done() since that function really is the generic implementation based on the BMSR_ANEGCOMPLETE status. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13phylib: Support attaching to generic 10g driverAndy Fleming1-0/+2
phy_attach_direct() may now attach to a generic 10G driver. It can also be used exactly as phy_connect_direct(), which will be useful when using of_mdio, as phy_connect (and therefore of_phy_connect) start the PHY state machine, which is currently irrelevant for 10G PHYs. Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13phylib: introduce PHY_INTERFACE_MODE_XGMII for 10G PHYAndy Fleming1-0/+1
Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13phylib: Add Clause 45 read/write functionsAndy Fleming1-0/+39
Need an extra parameter to read or write Clause 45 PHYs, so need a different API with the extra parameter. Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-04phylib: make phy_scan_fixups() staticSergei Shtylyov1-1/+0
phy_scan_fixups() isn't and shouldn't be called by the drivers directly, so unexport it. And since Florian Fainelli's recent patches, the function is only called locally, so we can make it static as well. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-04phylib: remove unused adjust_state() callbackSergei Shtylyov1-6/+1
Remove adjust_state() callback from 'struct phy_device' since it seems to have never been really used from the inception: phy_start_machine() has been always called with 2nd argument equal to NULL. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-04<linux/phy.h>: coding style fixesSergei Shtylyov1-19/+19
Running 'checkpatch.pl' gives some errors and warnings: - no spaces around =; - * separated by space from the function name; - { in function definition not on a separate line; - line over 80 characters. While fixing these, also fix the following style issues: - file name in the heading comment; - alignment not matching open paren. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17net: phy: provide phy_resume/phy_suspend helpersSebastian Hesselbarth1-0/+2
This adds helper functions to resume and suspend a given phy_device by calling the corresponding driver callbacks if available. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09net: phy: report link partner features through ethtoolFlorian Fainelli1-2/+3
The PHY library already reads the MII_STAT1000 and MII_LPA registers in genphy_read_status(), so extend it to also populate the PHY device link partner advertised features such that we can feed this back into ethtool when asked for it in phy_ethtool_gset(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06net: phy: breakdown PHY_*_FEATURES definesFlorian Fainelli1-7/+16
Breakdown the PHY_*_FEATURES into per speed defines such that we can easily re-use them individually. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20net/phy: Add the autocross feature for forced links on VSC82x4Madalin Bucur1-0/+1
Add auto-MDI/MDI-X capability for forced (autonegotiation disabled) 10/100 Mbps speeds on Vitesse VSC82x4 PHYs. Exported previously static function genphy_setup_forced() required by the new config_aneg handler in the Vitesse PHY module. Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Signed-off-by: Shruti Kanetkar <Shruti@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31phy: add reverse MII PHY connection typeFlorian Fainelli1-0/+1
The PHY library currently does not know about the the reverse MII connection type. Add it to the list of supported PHY modes and update of_get_phy_mode() to support it and look for the string "rev-mii". Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-27phy: allow drivers to flag a PHY device as internalFlorian Fainelli1-0/+12
libphy currently always reports a PHY as an external transceiver from the ethtool output. This is inaccurate, because some drivers should be able to tell that a PHY device is an internal transceiver of an Ethernet MAC. Add a new flag (PHY_IS_INTERNAL) which can be set by PHY drivers just like other flags, and a corresponding helper: phy_is_internal() which can be used by networking drivers to query if a given PHY device is internal. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-20phy: add phy_mac_interrupt() to use with PHY_IGNORE_INTERRUPTFlorian Fainelli1-0/+2
There is currently no way for an Ethernet MAC driver servicing PHY link interrupts to notify this to the PHY state machine without defining its own state machine. Since most drivers are not so special, introduce a helper: phy_mac_interrupt() which can be called from a link up/down interrupt routine to update the PHY state machine. To avoid code duplication some refactoring has been done to expose the workqueue and its corresponding callback internally. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-20phy: fix the use of PHY_IGNORE_INTERRUPTFlorian Fainelli1-0/+12
When a PHY device is registered with the special IRQ value PHY_IGNORE_INTERRUPT (-2) it will not properly be handled by the PHY library: - it continues to poll its register, while we do not want this because such PHY link events or register changes are serviced by an Ethernet MAC - it will still try to configure PHY interrupts at the PHY level, such interrupts do not exist at the PHY but at the MAC level - the state machine only handles PHY_POLL, but should also handle PHY_IGNORE_INTERRUPT similarly This patch updates the PHY state machine and initialization paths to account for the specific PHY_IGNORE_INTERRUPT. Based on an earlier patch by Thomas Petazzoni, and reworked to add the missing bits. Add a helper phy_interrupt_is_valid() which specifically tests for a PHY interrupt not to be PHY_POLL or PHY_IGNORE_INTERRUPT and use it throughout the code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12phy: add set_wol/get_wol functionsMichael Stapelberg1-0/+10
This allows ethernet drivers (such as the mv643xx_eth) to support Wake on LAN on platforms where PHY registers have to be configured for Wake on LAN (e.g. the Marvell Kirkwood based qnap TS-119P II). Signed-off-by: Michael Stapelberg <michael@stapelberg.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14net: phy: remove flags argument from phy_{attach, connect, connect_direct}Florian Fainelli1-3/+3
The flags argument of the phy_{attach,connect,connect_direct} functions is then used to assign a struct phy_device dev_flags with its value. All callers but the tg3 driver pass the flag 0, which results in the underlying PHY drivers in drivers/net/phy/ not being able to actually use any of the flags they would set in dev_flags. This patch gets rid of the flags argument, and passes phydev->dev_flags to the internal PHY library call phy_attach_direct() such that drivers which actually modify a phy device dev_flags get the value preserved for use by the underlying phy driver. Acked-by: Kosta Zertsekel <konszert@marvell.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-09phylib: Support registering a bunch of driversChristian Hohnstaedt1-0/+2
If registering of one of them fails, all already registered drivers of this module will be unregistered. Use the new register/unregister functions in all drivers registering more than one driver. amd.c, realtek.c: Simplify: directly return registration result. Tested with broadcom.c All others compile-tested. Signed-off-by: Christian Hohnstaedt <chohnstaedt@innominate.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-01phy: add the EEE support and the way to access to the MMD registers.Giuseppe CAVALLARO1-0/+5
This patch adds the support for the Energy-Efficient Ethernet (EEE) to the Physical Abstraction Layer. To support the EEE we have to access to the MMD registers 3.20 and 7.60/61. So two new functions have been added to read/write the MMD registers (clause 45). An Ethernet driver (I tested the stmmac) can invoke the phy_init_eee to properly check if the EEE is supported by the PHYs and it can also set the clock stop enable bit in the 3.0 register. The phy_get_eee_err can be used for reporting the number of time where the PHY failed to complete its normal wake sequence. In the end, this patch also adds the EEE ethtool support implementing: o phy_ethtool_set_eee o phy_ethtool_get_eee v1: initial patch v2: fixed some errors especially on naming convention v3: renamed again the mmd read/write functions thank to Ben's feedback v4: moved file to phy.c and added the ethtool support. v5: fixed phy_adv_to_eee, phy_eee_to_supported, phy_eee_to_adv return values according to ethtool API (thanks to Ben's feedback). Renamed some macros to avoid too long names. v6: fixed kernel-doc comments to be properly parsed. Fixed the phy_init_eee function: we need to check which link mode was autonegotiated and then the corresponding bits in 7.60 and 7.61 registers. v7: reviewed the way to get the negotiated settings. v8: fixed a problem in the phy_init_eee return value erroneously added when included the phy_read_status call. v9: do not remove the MDIO_AN_EEE_ADV_100TX and MDIO_AN_EEE_ADV_1000T and fixed the eee_{cap,lp,adv} declaration as "int" instead of u16. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27netdev/phy/of: Add more methods for binding PHY devices to drivers.David Daney1-0/+6
Allow PHY drivers to supply their own device matching function (match_phy_device()), or to be matched OF compatible properties. PHYs following IEEE802.3 clause 45 have more than one device identifier constants, which breaks the default device matching code. Other 10G PHYs don't follow the standard manufacturer/device identifier register layout standards, but they do use the standard MDIO bus protocols for register access. Both of these require adjustments to the PHY driver to device matching code. If the there is an of_node associated with such a PHY, we can match it to its driver using the "compatible" properties, just as we do with certain platform devices. If the "compatible" property match fails, first check if there is a driver supplied matching function, and if not fall back to the existing identifier matching rules. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYsDavid Daney1-1/+17
The IEEE802.3 clause 45 MDIO bus protocol allows for directly addressing PHY registers using a 21 bit address, and is used by many 10G Ethernet PHYS. Already existing is the ability of MDIO bus drivers to use clause 45, with the MII_ADDR_C45 flag. Here we add struct phy_c45_device_ids to hold the device identifier registers present in clause 45. struct phy_device gets a couple of new fields: c45_ids to hold the identifiers and is_c45 to signal that it is clause 45. get_phy_device() gets a new parameter is_c45 to indicate that the PHY device should use the clause 45 protocol, and its callers are adjusted to pass false. The follow-on patch to of_mdio.c will pass true where appropriate. EXPORT phy_device_create() so that the follow-on patch to of_mdio.c can use it to create phy devices for PHYs, that have non-standard device identifier registers, based on the device tree bindings. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16netdev/phy: Make get_phy_id() static and quit EXPORTing it.David Daney1-1/+0
This function is only referenced from within phy_device.c, so there is no reason to export it. In fact, we can make it static. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04ethtool: Introduce a method for getting time stamping capabilities.Richard Cochran1-0/+3
This commit adds a new ethtool ioctl that exposes the SO_TIMESTAMPING capabilities of a network interface. In addition, user space programs can use this ioctl to discover the PTP Hardware Clock (PHC) device associated with the interface. Since software receive time stamps are handled by the stack, the generic ethtool code can answer the query correctly in case the MAC or PHY drivers lack special time stamping features. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-16device.h: audit and cleanup users in main include dirPaul Gortmaker1-2/+3
The <linux/device.h> header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-01-12phylib: introduce mdiobus_alloc_size()Timur Tabi1-1/+6
Introduce function mdiobus_alloc_size() as an alternative to mdiobus_alloc(). Most callers of mdiobus_alloc() also allocate a private data structure, and then manually point bus->priv to this object. mdiobus_alloc_size() combines the two operations into one, which simplifies memory management. The original mdiobus_alloc() now just calls mdiobus_alloc_size(0). Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24net: hold sock reference while processing tx timestampsRichard Cochran1-1/+1
The pair of functions, * skb_clone_tx_timestamp() * skb_complete_tx_timestamp() were designed to allow timestamping in PHY devices. The first function, called during the MAC driver's hard_xmit method, identifies PTP protocol packets, clones them, and gives them to the PHY device driver. The PHY driver may hold onto the packet and deliver it at a later time using the second function, which adds the packet to the socket's error queue. As pointed out by Johannes, nothing prevents the socket from disappearing while the cloned packet is sitting in the PHY driver awaiting a timestamp. This patch fixes the issue by taking a reference on the socket for each such packet. In addition, the comments regarding the usage of these function are expanded to highlight the rule that PHY drivers must use skb_complete_tx_timestamp() to release the packet, in order to release the socket reference, too. These functions first appeared in v2.6.36. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Cc: <stable@vger.kernel.org> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27net: ibm_newemac: convert it to use of_get_phy_modeShawn Guo1-1/+3
The patch extends 'enum phy_interface_t' and of_get_phy_mode a little bit with PHY_INTERFACE_MODE_NA and PHY_INTERFACE_MODE_SMII added, and then converts ibm_newemac net driver to use of_get_phy_mode getting phy mode from device tree. It also resolves the namespace conflict on phy_read/write between common mdiobus interface and ibm_newemac private one. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: David S. Miller <davem@davemloft.net> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David Miller <davem@davemloft.net>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma1-1/+1
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-24phylib: make local function staticstephen hemminger1-12/+0
The following functions are not used directly by any drivers: phy_attach_direct phy_device_create phy_prepare_link genphy_config_advert genphy_setup_forced phy_config_interrupt phy_clear_interrypt phy_sanitize_settings phy_enable_interrupts phy_disable_interrupts Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02net: Improve comments in include/linux/phy.hPeter Meerwald1-2/+2
Correct state range of PHY bus addresses (i.e. 0-31) in comment, make spelling of PHY consistent in comments. Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18net: support time stamping in phy devices.Richard Cochran1-0/+22
This patch adds a new networking option to allow hardware time stamps from PHY devices. When enabled, likely candidates among incoming and outgoing network packets are offered to the PHY driver for possible time stamping. When accepted by the PHY driver, incoming packets are deferred for later delivery by the driver. The patch also adds phylib driver methods for the SIOCSHWTSTAMP ioctl and callbacks for transmit and receive time stamping. Drivers may optionally implement these functions. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18net: preserve ifreq parameter when calling generic phy_mii_ioctl().Richard Cochran1-1/+1
The phy_mii_ioctl() function unnecessarily throws away the original ifreq. We need access to the ifreq in order to support PHYs that can perform hardware time stamping. Two maverick drivers filter the ioctl commands passed to phy_mii_ioctl(). This is unnecessary since phylib will check the command in any case. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-02phylib: Support phy module autoloadingDavid Woodhouse1-0/+1
We don't use the normal hotplug mechanism because it doesn't work. It will load the module some time after the device appears, but that's not good enough for us -- we need the driver loaded _immediately_ because otherwise the NIC driver may just abort and then the phy 'device' goes away. [bwh: s/phy/mdio/ in module alias, kerneldoc for struct mdio_device_id] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16NET: Support clause 45 MDIO commands at the MDIO bus levelJason Gunthorpe1-4/+8
IEEE 802.3ae clause 45 specifies a somewhat modified MDIO protocol for use by 10GIGE phys. The main change is a 21 bit address split into a 5 bit device ID and a 16 bit register offset. The definition is designed so that normal and extended devices can run on the same MDIO bus. Extend mdio-bitbang to do the new protocol. At the MDIO bus level the protocol is requested by or'ing MII_ADDR_C45 into the register offset. Make phy_read/phy_write/etc pass a full 32 bit register offset. This does not attempt to make the phy layer support C45 style PHYs, just to provide the MDIO bus support. Tested against a Broadcom 10GE phy with ID 0x206034, and several Broadcom 10/100/1000 Phys in normal mode. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-04libphy: add phy_find_first functionJiri Pirko1-0/+1
Many drivers do this in them manually. Now they can use this function. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19phylib: Move workqueue initialization to a proper placeAnton Vorontsov1-0/+1
commit 541cd3ee00a4fe975b22fac6a3bc846bacef37f7 ("phylib: Fix deadlock on resume") caused TI DaVinci EMAC ethernet driver to oops upon resume: PM: resume of devices complete after 237.098 msecs Restarting tasks ... done. kernel BUG at kernel/workqueue.c:354! Unable to handle kernel NULL pointer dereference at virtual address 00000000 [...] Backtrace: [<c002c598>] (__bug+0x0/0x2c) from [<c0052a54>] (queue_delayed_work_on+0x74/0xf8) [<c00529e0>] (queue_delayed_work_on+0x0/0xf8) from [<c0052b30>] (queue_delayed_work+0x2c/0x30) The oops pops up because TI DaVinci EMAC driver detaches PHY on suspend and attaches it back on resume. Attaching makes phylib call phy_start_machine() that initializes a workqueue. On the other hand, PHY's resume routine will call phy_start_machine() again, and that will cause the oops since we just destroyed the already scheduled workqueue. This patch fixes the issue by moving workqueue initialization to phy_device_create(). p.s. We don't see this oops with ucc_geth and gianfar drivers because they perform a fine-grained suspend, i.e. they just stop the PHYs without detaching. Reported-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30phylib: Properly reinitialize PHYs after hibernationAnton Vorontsov1-0/+1
Since hibernation assumes power loss, we should fully reinitialize PHYs (including platform fixups), as if PHYs were just attached. This patch factors phy_init_hw() out of phy_attach_direct(), then converts mdio_bus to dev_pm_ops and adds an appropriate restore() callback. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-26phy: Eliminate references to BUS_ID_SIZE.David S. Miller1-2/+2
Just use the constant 20 to keep things working. If someone is so motivated, this can be converted over to dynamic strings. I tried and it's a lot of work. But for now this is good enough. Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.