aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/pm_runtime.h (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-02-23net: phy: realtek: Dummy IRQ calls for RTL8366RBLinus Walleij2-0/+15
This fixes a regression introduced by commit 0d2e778e38e0ddffab4bb2b0e9ed2ad5165c4bf7 "net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt". This assumes that a PHY cannot trigger interrupt unless it has .config_intr() or .ack_interrupt() implemented. A later patch makes the code assume both need to be implemented for interrupts to be present. But this PHY (which is inside a DSA) will happily fire interrupts without either callback. Implement dummy callbacks for .config_intr() and .ack_interrupt() in the phy header to fix this. Tested on the RTL8366RB on D-Link DIR-685. Fixes: 0d2e778e38e0 ("net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt") Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23tcp: repaired skbs must init their tso_segsEric Dumazet1-0/+1
syzbot reported a WARN_ON(!tcp_skb_pcount(skb)) in tcp_send_loss_probe() [1] This was caused by TCP_REPAIR sent skbs that inadvertenly were missing a call to tcp_init_tso_segs() [1] WARNING: CPU: 1 PID: 0 at net/ipv4/tcp_output.c:2534 tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc7+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x45 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] fixup_bug arch/x86/kernel/traps.c:173 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534 Code: 88 fc ff ff 4c 89 ef e8 ed 75 c8 fb e9 c8 fc ff ff e8 43 76 c8 fb e9 63 fd ff ff e8 d9 75 c8 fb e9 94 f9 ff ff e8 bf 03 91 fb <0f> 0b e9 7d fa ff ff e8 b3 03 91 fb 0f b6 1d 37 43 7a 03 31 ff 89 RSP: 0018:ffff8880ae907c60 EFLAGS: 00010206 RAX: ffff8880a989c340 RBX: 0000000000000000 RCX: ffffffff85dedbdb RDX: 0000000000000100 RSI: ffffffff85dee0b1 RDI: 0000000000000005 RBP: ffff8880ae907c90 R08: ffff8880a989c340 R09: ffffed10147d1ae1 R10: ffffed10147d1ae0 R11: ffff8880a3e8d703 R12: ffff888091b90040 R13: ffff8880a3e8d540 R14: 0000000000008000 R15: ffff888091b90860 tcp_write_timer_handler+0x5c0/0x8a0 net/ipv4/tcp_timer.c:583 tcp_write_timer+0x10e/0x1d0 net/ipv4/tcp_timer.c:607 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 arch/x86/include/asm/irqflags.h:58 Code: ff ff ff 48 89 c7 48 89 45 d8 e8 59 0c a1 fa 48 8b 45 d8 e9 ce fe ff ff 48 89 df e8 48 0c a1 fa eb 82 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90 RSP: 0018:ffff8880a98afd78 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffffffff1125061 RBX: ffff8880a989c340 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000001 RDI: ffff8880a989cbbc RBP: ffff8880a98afda8 R08: ffff8880a989c340 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 R13: ffffffff889282f8 R14: 0000000000000001 R15: 0000000000000000 arch_cpu_idle+0x10/0x20 arch/x86/kernel/process.c:555 default_idle_call+0x36/0x90 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x386/0x570 kernel/sched/idle.c:262 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:353 start_secondary+0x404/0x5c0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 79861919b889 ("tcp: fix TCP_REPAIR xmit queue setup") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net/x25: fix a race in x25_bind()Eric Dumazet1-5/+8
syzbot was able to trigger another soft lockup [1] I first thought it was the O(N^2) issue I mentioned in my prior fix (f657d22ee1f "net/x25: do not hold the cpu too long in x25_new_lci()"), but I eventually found that x25_bind() was not checking SOCK_ZAPPED state under socket lock protection. This means that multiple threads can end up calling x25_insert_socket() for the same socket, and corrupt x25_list [1] watchdog: BUG: soft lockup - CPU#0 stuck for 123s! [syz-executor.2:10492] Modules linked in: irq event stamp: 27515 hardirqs last enabled at (27514): [<ffffffff81006673>] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (27515): [<ffffffff8100668f>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (32): [<ffffffff8632ee73>] x25_get_neigh+0xa3/0xd0 net/x25/x25_link.c:336 softirqs last disabled at (34): [<ffffffff86324bc3>] x25_find_socket+0x23/0x140 net/x25/af_x25.c:341 CPU: 0 PID: 10492 Comm: syz-executor.2 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__sanitizer_cov_trace_pc+0x4/0x50 kernel/kcov.c:97 Code: f4 ff ff ff e8 11 9f ea ff 48 c7 05 12 fb e5 08 00 00 00 00 e9 c8 e9 ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 <48> 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 38 0c 92 7e 81 e2 RSP: 0018:ffff88806e94fc48 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffff1100d84dac5 RBX: 0000000000000001 RCX: ffffc90006197000 RDX: 0000000000040000 RSI: ffffffff86324bf3 RDI: ffff88806c26d628 RBP: ffff88806e94fc48 R08: ffff88806c1c6500 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: ffff88806c26d628 R13: ffff888090455200 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007f3a107e4700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3a107e3db8 CR3: 00000000a5544000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __x25_find_socket net/x25/af_x25.c:327 [inline] x25_find_socket+0x7d/0x140 net/x25/af_x25.c:342 x25_new_lci net/x25/af_x25.c:355 [inline] x25_connect+0x380/0xde0 net/x25/af_x25.c:784 __sys_connect+0x266/0x330 net/socket.c:1662 __do_sys_connect net/socket.c:1673 [inline] __se_sys_connect net/socket.c:1670 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1670 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f3a107e3c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e29 RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000005 RBP: 000000000073c040 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3a107e46d4 R13: 00000000004be362 R14: 00000000004ceb98 R15: 00000000ffffffff Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 10493 Comm: syz-executor.3 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline] RIP: 0010:queued_write_lock_slowpath+0x143/0x290 kernel/locking/qrwlock.c:86 Code: 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 41 0f b6 55 00 <41> 38 d7 7c eb 84 d2 74 e7 48 89 df e8 cc aa 4e 00 eb dd be 04 00 RSP: 0018:ffff888085c47bd8 EFLAGS: 00000206 RAX: 0000000000000300 RBX: ffffffff89412b00 RCX: 1ffffffff1282560 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89412b00 RBP: ffff888085c47c70 R08: 1ffffffff1282560 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: 00000000000000ff R13: fffffbfff1282560 R14: 1ffff11010b88f7d R15: 0000000000000003 FS: 00007fdd04086700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdd04064db8 CR3: 0000000090be0000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: queued_write_lock include/asm-generic/qrwlock.h:104 [inline] do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203 __raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline] _raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312 x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267 x25_bind+0x273/0x340 net/x25/af_x25.c:703 __sys_bind+0x23f/0x290 net/socket.c:1481 __do_sys_bind net/socket.c:1492 [inline] __se_sys_bind net/socket.c:1490 [inline] __x64_sys_bind+0x73/0xb0 net/socket.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Fixes: 90c27297a9bf ("X.25 remove bkl in bind") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: andrew hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: dsa: Remove documentation for port_fdb_prepareHauke Mehrtens1-7/+3
This callback was removed some time ago, also remove the documentation. Fixes: 1b6dd556c304 ("net: dsa: Remove prepare phase for FDB") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23Revert "bridge: do not add port to router list when receives query with source 0.0.0.0"Hangbin Liu1-8/+1
This reverts commit 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0") and commit 0fe5119e267f ("net: bridge: remove ipv6 zero address check in mcast queries") The reason is RFC 4541 is not a standard but suggestive. Currently we will elect 0.0.0.0 as Querier if there is no ip address configured on bridge. If we do not add the port which recives query with source 0.0.0.0 to router list, the IGMP reports will not be about to forward to Querier, IGMP data will also not be able to forward to dest. As Nikolay suggested, revert this change first and add a boolopt api to disable none-zero election in future if needed. Reported-by: Linus Lüssing <linus.luessing@c0d3.blue> Reported-by: Sebastian Gottschall <s.gottschall@newmedia-net.de> Fixes: 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0") Fixes: 0fe5119e267f ("net: bridge: remove ipv6 zero address check in mcast queries") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23selftests: fib_tests: sleep after changing carrier. again.Thadeu Lima de Souza Cascardo1-0/+1
Just like commit e2ba732a1681 ("selftests: fib_tests: sleep after changing carrier"), wait one second to allow linkwatch to propagate the carrier change to the stack. There are two sets of carrier tests. The first slept after the carrier was set to off, and when the second set ran, it was likely that the linkwatch would be able to run again without much delay, reducing the likelihood of a race. However, if you run 'fib_tests.sh -t carrier' on a loop, you will quickly notice the failures. Sleeping on the second set of tests make the failures go away. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: phy: aquantia: use genphy_c45_read_statusHeiner Kallweit1-28/+18
Use new function genphy_c45_read_status(). 1000BaseT link partner advertisement needs to be read from vendor registers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: phy: add genphy_c45_read_statusHeiner Kallweit2-0/+34
Similar to genphy_read_status() for Clause 22 add a generic read_status function for Clause 45. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: phy: don't change modes we don't care about in genphy_c45_read_lpaHeiner Kallweit1-1/+1
Because 1000BaseT isn't covered by Clause 45, the 1000BaseT flags in phydev->lp_advertising may have been set based on vendor registers already. genphy_c45_read_lpa() would clear these flags as of today. Therefore switch to mii_lpa_mod_linkmode_lpa_t. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: phy: aquantia: add support for auto-negotiation configurationAndrew Lunn1-3/+37
Make use of the generic c45 code, plus code specific to the Aquantia phy for 1000BaseT negotiation. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: phy: aquantia: remove false 5G and 10G speed ability for AQCS109Heiner Kallweit1-0/+10
AQCS109 belongs to a family of PHY's where certain members don't support 5G or 10G. However for all members of the family the chip reports 10G and 5G capability. Therefore remove the not supported modes for AQCS109. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Add Spectrum-2 ASIC support for new port types and speedsShalom Toledo1-0/+54
Add Spectrum-2 ASIC support for the following new port types and speeds: * 50Gbps 1-lane * 100Gbps 2-lanes * 200Gbps 4-lanes Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Add Spectrum-2 ASIC port type-speed operationsShalom Toledo2-1/+330
Add Spectrum-2 ASIC port type-speed operations. Since multiple ethtool link modes are represented using a single bit in the ASIC, the driver forces the user to configure all types per a specific speed. For example, if the user wants to advertise 100Gbps 4-lanes speed, he should advertise all the types of 100Gbps 4-lanes speed that are supported by the ASIC as shown below: Supported ethtool bits for 100Gbps 4-lanes: 0x1000000000 100000baseKR4 Full 0x2000000000 100000baseSR4 Full 0x4000000000 100000baseCR4 Full 0x8000000000 100000baseLR4_ER4 Full Command for advertising 100Gbps 4-lanes: ethtool -s enp3s0np1 advertise 0xF000000000 Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: reg: Add new port type-speed fields for PTYS registerShalom Toledo1-0/+57
PTYS register introduces a new layout for port type-speed fields. These fields extend the existing ones in order to handle more types and speeds. For example, the new 200Gbps speed. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: reg: 80 columns wrapping changeShalom Toledo1-3/+6
80 columns wrapping change in mlxsw_reg_ptys_eth_unpack function. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: reg: Rename p_eth_proto_adm to full name p_eth_proto_adminShalom Toledo1-3/+3
Rename p_eth_proto_adm to p_eth_proto_admin in mlxsw_reg_ptys_eth_unpack function. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Add port type-speed operationsShalom Toledo2-31/+133
Add port type-speed operations in order to have different operations for different ASICs. For now, both ASICs use the same pointer. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Rename port type-speed functions to ASIC specificShalom Toledo1-34/+35
Rename port speed-type functions to be Spectrum-1 ASIC specific. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Query port connector type from firmwareShalom Toledo2-23/+49
Instead of deriving the port connector type from port admin state, query it from firmware. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Remove unsupported eth_proto_lp_advertise field in PTYSShalom Toledo2-21/+1
Remove eth_proto_lp_advertise field in PTYS register since it is not supported by the firmware. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Remove duplicate port link mode entryShalom Toledo1-5/+0
Remove duplicate port link mode entry from mlxsw_sp_port_link_mode. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: set static variable an initial value in atl2_probe()Mao Wenan1-3/+1
cards_found is a static variable, but when it enters atl2_probe(), cards_found is set to zero, the value is not consistent with last probe, so next behavior is not our expect. Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23kcm: Remove unnecessary SLAB_PANIC for kmem_cache_create() in kcm_initYueHaibing1-2/+2
There has check NULL on kmem_cache_create on failure in kcm_init, no need use SLAB_PANIC to panic the system. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23veth: Fix -Wformat-truncationFlorian Fainelli1-1/+2
Provide a precision hint to snprintf() in order to eliminate a -Wformat-truncation warning provided below. A maximum of 11 characters is allowed to reach a maximum of 32 - 1 characters given a possible maximum value of queues using up to UINT_MAX which occupies 10 characters. Incidentally 11 is the number of characters for "xdp_packets" which is the largest string we append. drivers/net/veth.c: In function 'veth_get_strings': drivers/net/veth.c:118:47: warning: '%s' directive output may be truncated writing up to 31 bytes into a region of size between 12 and 21 [-Wformat-truncation=] snprintf(p, ETH_GSTRING_LEN, "rx_queue_%u_%s", ^~ drivers/net/veth.c:118:5: note: 'snprintf' output between 12 and 52 bytes into a destination of size 32 snprintf(p, ETH_GSTRING_LEN, "rx_queue_%u_%s", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ i, veth_rq_stats_desc[j].desc); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23e1000e: Fix -Wformat-truncation warningsFlorian Fainelli1-2/+2
Provide precision hints to snprintf() since we know the destination buffer size of the RX/TX ring names are IFNAMSIZ + 5 - 1. This fixes the following warnings: drivers/net/ethernet/intel/e1000e/netdev.c: In function 'e1000_request_msix': drivers/net/ethernet/intel/e1000e/netdev.c:2109:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-rx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2107:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->rx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->rx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-rx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/e1000e/netdev.c:2125:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-tx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2123:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->tx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->tx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-tx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: dsa: mv88e6xxx: Fix -Wformat-security warningsFlorian Fainelli2-2/+2
We are not specifying an explicit format argument but instead passing a string litteral which causes these two warnings to show up: drivers/net/dsa/mv88e6xxx/chip.c: In function 'mv88e6xxx_irq_poll_setup': drivers/net/dsa/mv88e6xxx/chip.c:483:2: warning: format not a string literal and no format arguments [-Wformat-security] chip->kworker = kthread_create_worker(0, dev_name(chip->dev)); ^~~~ drivers/net/dsa/mv88e6xxx/ptp.c: In function 'mv88e6xxx_ptp_setup': drivers/net/dsa/mv88e6xxx/ptp.c:403:4: warning: format not a string literal and no format arguments [-Wformat-security] dev_name(chip->dev)); ^~~~~~~~ LD [M] drivers/net/dsa/mv88e6xxx/mv88e6xxx.o Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Avoid -Wformat-truncation warningsFlorian Fainelli1-2/+2
Give precision identifiers to the two snprintf() formatting the priority and TC strings to avoid producing these two warnings: drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function 'mlxsw_sp_port_get_prio_strings': drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:37: warning: '%d' directive output may be truncated writing between 1 and 3 bytes into a region of size between 0 and 31 [-Wformat-truncation=] snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:3: note: 'snprintf' output between 3 and 36 bytes into a destination of size 32 snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mlxsw_sp_port_hw_prio_stats[i].str, prio); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function 'mlxsw_sp_port_get_tc_strings': drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:37: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 31 [-Wformat-truncation=] snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:3: note: 'snprintf' output between 3 and 44 bytes into a destination of size 32 snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mlxsw_sp_port_hw_tc_stats[i].str, tc); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23bpfilter: re-add header search paths to tools include to fix build errorMasahiro Yamada1-0/+1
I thought header search paths to tools/include(/uapi) were unneeded, but it looks like a build error occurs depending on the compiler. Commit 303a339f30a9 ("bpfilter: remove extra header search paths for bpfilter_umh") reintroduced the build error fixed by commit ae40832e53c3 ("bpfilter: fix a build err"). Apology for the breakage, and thanks to Guenter for reporting this. Fixes: 303a339f30a9 ("bpfilter: remove extra header search paths for bpfilter_umh") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10GMaxime Chevallier1-1/+5
Some Marvell Alaska PHYs support 2.5G, 5G and 10G BaseT links. Their default behaviour is to advertise all of these modes, but at the moment, only 10GBaseT is supported. To prevent link partners from establishing link at that speed, clear these modes upon configuring aneg parameters. Fixes: 20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reported-by: Russell King <linux@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23bpf, doc: add bpf list as secondary entry to maintainers fileDaniel Borkmann1-1/+13
We recently created a bpf@vger.kernel.org list (https://lore.kernel.org/bpf/) for BPF related discussions, originally in context of BPF track at LSF/MM for topic discussions. It's *optional* but *desirable* to keep it in Cc for BPF related kernel/loader/llvm/tooling threads, meaning also infrastructure like llvm that sits on top of kernel but is crucial to BPF. In any case, netdev with it's bpf delegate is *as-is* today primary list for patches, so nothing changes in the workflow. Main purpose is to have some more awareness for the bpf@vger.kernel.org list that folks can Cc for BPF specific topics. Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-22udp: fix possible user after free in error handlerPaolo Abeni1-2/+4
Similar to the previous commit, this addresses the same issue for ipv4: use a single fetch operation and use the correct rcu annotation. Fixes: e7cc082455cb ("udp: Support for error handlers of tunnels with arbitrary destination port") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22udpv6: fix possible user after free in error handlerPaolo Abeni1-4/+6
Before derefencing the encap pointer, commit e7cc082455cb ("udp: Support for error handlers of tunnels with arbitrary destination port") checks for a NULL value, but the two fetch operation can race with removal. Fix the above using a single access. Also fix a couple of type annotations, to make sparse happy. Fixes: e7cc082455cb ("udp: Support for error handlers of tunnels with arbitrary destination port") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22fou6: fix proto error handler argument typePaolo Abeni1-1/+1
Last argument of gue6_err_proto_handler() has a wrong type annotation, fix it and make sparse happy again. Fixes: b8a51b38e4d4 ("fou, fou6: ICMP error handlers for FoU and GUE") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22udpv6: add the required annotation to mib typePaolo Abeni1-1/+1
In commit 029a37434880 ("udp6: cleanup stats accounting in recvmsg()") I forgot to add the percpu annotation for the mib pointer. Add it, and make sparse happy. Fixes: 029a37434880 ("udp6: cleanup stats accounting in recvmsg()") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22mdio_bus: Fix use-after-free on device_register failsYueHaibing1-1/+0
KASAN has found use-after-free in fixed_mdio_bus_init, commit 0c692d07842a ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") call put_device() while device_register() fails,give up the last reference to the device and allow mdiobus_release to be executed ,kfreeing the bus. However in most drives, mdiobus_free be called to free the bus while mdiobus_register fails. use-after-free occurs when access bus again, this patch revert it to let mdiobus_free free the bus. KASAN report details as below: BUG: KASAN: use-after-free in mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 Read of size 4 at addr ffff8881dc824d78 by task syz-executor.0/3524 CPU: 1 PID: 3524 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 fixed_mdio_bus_init+0x283/0x1000 [fixed_phy] ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6215c19c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00007f6215c19c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6215c1a6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 Allocated by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] mdiobus_alloc_size+0x54/0x1b0 drivers/net/phy/mdio_bus.c:143 fixed_mdio_bus_init+0x163/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kfree+0xe1/0x270 mm/slub.c:3938 device_release+0x78/0x200 drivers/base/core.c:919 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 put_device+0x1c/0x30 drivers/base/core.c:2060 __mdiobus_register+0x483/0x560 drivers/net/phy/mdio_bus.c:382 fixed_mdio_bus_init+0x26b/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881dc824c80 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 248 bytes inside of 2048-byte region [ffff8881dc824c80, ffff8881dc825480) The buggy address belongs to the page: page:ffffea0007720800 count:1 mapcount:0 mapping:ffff8881f6c02800 index:0x0 compound_mapcount: 0 flags: 0x2fffc0000010200(slab|head) raw: 02fffc0000010200 0000000000000000 0000000500000001 ffff8881f6c02800 raw: 0000000000000000 00000000800f000f 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881dc824c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881dc824c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881dc824d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881dc824d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881dc824e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 0c692d07842a ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: phy: at803x: disable delay only for RGMII modeVinod Koul1-11/+42
Per "Documentation/devicetree/bindings/net/ethernet.txt" RGMII mode should not have delay in PHY whereas RGMII_ID and RGMII_RXID/RGMII_TXID can have delay in PHY. So disable the delay only for RGMII mode and enable for other modes. Also treat the default case as disabled delays. Fixes: cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Peter Ujfalusi <peter.ujflausi@ti.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: phy: at803x: don't inline helpersVinod Koul1-2/+2
Some helpers were declared with the "inline" function specifier. It is preferable to let the compiler pick the right optimizations, so drop the specifier for at803x_disable_rx_delay() and at803x_disable_tx_delay() Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Peter Ujfalusi <peter.ujflausi@ti.com> Reviewed-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net_sched: initialize net pointer inside tcf_exts_init()Cong Wang13-29/+30
For tcindex filter, it is too late to initialize the net pointer in tcf_exts_validate(), as tcf_exts_get_net() requires a non-NULL net pointer. We can just move its initialization into tcf_exts_init(), which just requires an additional parameter. This makes the code in tcindex_alloc_perfect_hash() prettier. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255Kalash Nainwal1-1/+1
Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255 to keep legacy software happy. This is similar to what was done for ipv4 in commit 709772e6e065 ("net: Fix routing tables with id > 255 for legacy software"). Signed-off-by: Kalash Nainwal <kalash@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22bnxt_en: Wait longer for the firmware message response to complete.Michael Chan2-2/+2
The code waits up to 20 usec for the firmware response to complete once we've seen the valid response header in the buffer. It turns out that in some scenarios, this wait time is not long enough. Extend it to 150 usec and use usleep_range() instead of udelay(). Fixes: 9751e8e71487 ("bnxt_en: reduce timeout on initial HWRM calls") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22bnxt_en: Fix typo in firmware message timeout logic.Michael Chan1-1/+1
The logic that polls for the firmware message response uses a shorter sleep interval for the first few passes. But there was a typo so it was using the wrong counter (larger counter) for these short sleep passes. The result is a slightly shorter timeout period for these firmware messages than intended. Fix it by using the proper counter. Fixes: 9751e8e71487 ("bnxt_en: reduce timeout on initial HWRM calls") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23nfp: bpf: fix ALU32 high bits clearance bugJiong Wang1-11/+6
NFP BPF JIT compiler is doing a couple of small optimizations when jitting ALU imm instructions, some of these optimizations could save code-gen, for example: A & -1 = A A | 0 = A A ^ 0 = A However, for ALU32, high 32-bit of the 64-bit register should still be cleared according to ISA semantics. Fixes: cd7df56ed3e6 ("nfp: add BPF to NFP code translator") Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-23nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_KJiong Wang1-1/+1
The intended optimization should be A ^ 0 = A, not A ^ -1 = A. Fixes: cd7df56ed3e6 ("nfp: add BPF to NFP code translator") Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-22net/mlx5: Support ndo bridge_setlink and getlinkHuy Nguyen1-0/+59
Allow enabling VEPA mode on the HCA's port in legacy devlink mode. Example: bridge link set dev ens1f0 hwmode vepa will turn on VEPA mode on the netdev ens1f0. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-22net/mlx5: E-Switch, Add support for VEPA in legacy mode.Huy Nguyen2-21/+207
In Virtual Ethernet Port Aggregator (VEPA) mode, the packet skips the system internal virtual switch and forwards to external network switch. In Mellanox HCA case, the virtual switch is the HCA's Eswitch. To support this, an new FDB flow table are created with level 0 and linked to the existing FDB flow table in legacy mode. By default, VEPA is turned off and this FDB flow table is empty. When VEPA is turned on, two rules are created. One rule to forward on uplink vport traffic to the legacy FDB. The other rule forward all other traffic to uplink vport. Other design alternatives were not chosen as explained below: 1. Create a forward rule in ACL flow table (most efficient design). This approach is the not chosen because firmware does not support forward rule to uplink vport (0xffff) for ACL flow table. 2. Add additional source port criteria in all the FDB rules to make the FDB rules to be received rules only. This approach is not chosen because it is not efficient as there can many rules in the FDB and VEPA mode cannot be controlled per vport. 3. Add a highest prioirty flow group in the existing legacy FDB Flow Table instead of a new flow table. This approoach does not work because the new flow group has the same match criteria as the promiscuous flow group and mlx5_add_flow_rules does not allow specifying flow group. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-22net/mlx5e: Fix mlx5e_tx_reporter_create return valueEran Ben Elisha1-1/+1
If reporter is ERR_PTR or NULL, error code shall be returned. At all other cases it shall return success. Fix that. Fixes: de8650a82071 ("net/mlx5e: Add tx reporter support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-22net/mlx5e: Fix return status of TX reporter timeout recoverEran Ben Elisha1-1/+1
In case of lost interrupt recover, we shall return success. Fix that. Fixes: 7d91126b1aea ("net/mlx5e: Add tx timeout support for mlx5e tx reporter") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reported-by: Maria Pasechnik <mariap@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-22net/mlx5e: Re-add support for TX timeout when TX reporter is not validEran Ben Elisha3-11/+16
When TX reporter was introduced, it took ownership over TX timeout error handling. this introduced a regression in case TX reporter is not valid (NET_DEVLINK is not set, or devlink_health_reporter_create failure). Fix mlx5e_tx_reporter_timeout function so it can be called at all times. In addition, remove a warning print that indicates that a TX timeout won't be handled in case of no valid TX reporter. Fixes: 7d91126b1aea ("net/mlx5e: Add tx timeout support for mlx5e tx reporter") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-22net/mlx5e: Fix warn print in case of TX reporter creation failureEran Ben Elisha1-1/+1
Print warning message in case of TX reporter creation failure, only if the return value is ERR_PTR type. NULL pointer return indicates that NET_DEVLINK is not set, and the warning print can be skipped. Fixes: de8650a82071 ("net/mlx5e: Add tx reporter support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-22net/mlx5e: Fix GRE key by controlling port tunnel entropy calculationEli Britstein7-5/+254
Flow entropy is calculated on the inner packet headers and used for flow distribution in processing, routing etc. For GRE-type encapsulations the entropy value is placed in the eight LSB of the key field in the GRE header as defined in NVGRE RFC 7637. For UDP based encapsulations the entropy value is placed in the source port of the UDP header. The hardware may support entropy calculation specifically for GRE and for all tunneling protocols. With commit df2ef3bff193 ("net/mlx5e: Add GRE protocol offloading") GRE is offloaded, but the hardware is configured by default to calculate flow entropy so packets transmitted on the wire have a wrong key. To support UDP based tunnels (i.e VXLAN), GRE (i.e. no flow entropy) and NVGRE (i.e. with flow entropy) the hardware behaviour must be controlled by the driver. Ensure port entropy calculation is enabled for offloaded VXLAN tunnels and disable port entropy calculation in the presence of offloaded GRE tunnels by monitoring the presence of entropy enabling tunnels (i.e VXLAN) and entropy disabing tunnels (i.e GRE). Fixes: df2ef3bff193 ("net/mlx5e: Add GRE protocol offloading") Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.