aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/power (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-05-05max17042_battery: Add support for max17047/50 chipRamakrishna Pallala1-0/+17
max17047 is improved version of max17042 chip. It has few HW bug fixes with minor changes in register set. max17050 is same as max17047 chip except its silicon packging. So from driver's point of view there is no difference btw max1047 and max1050. This patch adds the support to dynamically detect the chip type and adds steps to initialize the max17047 chip. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-05charger-manager: Provide cm_notify_event function for in-kernel useChanwoo Choi1-8/+17
By using cm_notify_event function, charger driver can report several charger events (e.g. battery full and external power in/out, etc) to Charger-Manager. Charger-Manager can properly and immediately control chargers by the reported event. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-05charger-manager: Poll battery health in normal stateChanwoo Choi1-0/+25
Charger-Manager needs to check battery health in normal state as well as suspend-to-RAM state. When the battery is fully charged, Charger-Manager needs to determine when the chargers restart charging. This patch allows Charger-Manager to monitor battery health in normal state and handle operation for chargers after battery is fully charged. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26Add I2C driver for Summit Microelectronics SMB347 Battery Charger.Bruce E. Robertson1-0/+117
Driver support for the Summit I²C battery charger. This is used in some Intel devices. Signed-off-by: Bruce E. Robertson <bruce.e.robertson@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26max17042: Add POR init procedure from Maxim appnoteRamakrishna Pallala1-0/+56
Add power on reset (POR) init procedure defined by the maxim appnote. Using this procedure ensures that the part is configured/initialized correctly at POR and improves early accuracy of the fuel gauge and informs the fuel gauge with the battery characterization parameters. The battery characterization parameters come from the maxim characterization procedure. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-13max17042: Align register definitions with data sheet and init appnoteDirk Brandewie1-9/+28
align the register names with max17042 data sheet removing registers that are marked reserved that are not used. Add register definitions defined in the maxim initialization appnote Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-01-06sbs-battery: Rename internals to new nameRhyland Klein1-5/+5
Now that this driver is named more generally, this change updates the internal variables, defines and functions to use this new name. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2012-01-06bq20z75: Rename to sbs-batteryRhyland Klein1-0/+0
This driver for the bq20z75 implemented the register spec defined by the SBS standard. As this is not unique to this the TI part this was originally written for, we can generalize this driver to show its support for any SBS compliant battery. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2012-01-04power_supply: Charger-Manager: Add properties for power-supply-classDonggeun Kim1-0/+17
Charger Manager provides power-supply-class aggregating information from multiple chargers and a fuel-gauge. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2012-01-04power_supply: Add initial Charger-Manager driverDonggeun Kim1-0/+130
Because battery health monitoring should be done even when suspended, it needs to wake up and suspend periodically. Thus, userspace battery monitoring may incur too much overhead; every device and task is woken up periodically. Charger Manager uses suspend-again to provide in-suspend monitoring. This patch allows to monitor battery health in-suspend state. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08power_supply: MAX17042: Support additional propertiesDonggeun Kim1-0/+91
This patch supports additional properties (PRESENT, CYCLE_COUNT, VOLTAGE_MAX, VOLTAGE_MIN_DESIGN, CURRENT_NOW, CURRENT_AVG, CHARGE_FULL, and TEMP). Plus, initialization code for registers is added. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: KyungMin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08bq20z75: Add support for external notificationRhyland Klein1-0/+3
Adding support for external power change notification. One problem found is that there is a lag time before the sensor will return a new status. To ensure that we only fire off the power_supply_changed event when the status returned from the sensor is actually different, we delay sending the the notification, and instead poll on it looking for a change. The amount of time to poll is configurable via platform data. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-04-20isp1704_charger: Allow board specific powering routineKalle Jokiniemi1-0/+29
The ISP1704/1707 chip can be put to full power down state by asserting the CHIP_SEL line. This patch enables platform or board specific hooks to put the device into power down mode in case not needed. This patch is a preparation for enabling this powering routine in n900 (rx-51) devices. Thanks to Heikki Krogerus for helping out with the patch. Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@nokia.com> Acked-By: Heikki Krogerus <heikki.krogerus@nokia.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-04-20power_supply: Add driver for MAX8903 chargerMyungJoo Ham1-0/+57
MAX8903 is an integrated battery charger and selector with two power inputs (USB and AC adapter). This driver enables the charger, handles interrupts, and provides power-supply-class information to userland. Tested on Exynos4 NURI / S5PC210 SLP7 boards. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-03-01bq20z75: Add i2c retry mechanismRhyland Klein1-0/+2
With the support of platform data, now adding support for option i2c retries on read/write failures. Ths is specified through the optional platform data. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-03-01bq20z75: Add optional battery detect gpioRhyland Klein1-0/+37
Adding support for an optional gpio for battery detection. This is passed in through the i2c platform data. It also accepts another field, battery_detect_present to signify the gpio state which means the battery is present, either 0 (low) or 1 (high). Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-02-22bq27x00: Add bq27000 supportLars-Peter Clausen1-0/+19
This patch adds support for the bq27000 battery to the bq27x00 driver. The bq27000 is similar to the bq27200 except that it uses the HDQ bus instead of I2C to communicate with the host system. The driver is implemented as a platform driver. The driver expects to be provided with a read callback function through its platform data. The read function is assumed to do the lowlevel HDQ handling and read out the value of a certain register. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Grazvydas Ignotas <notasas@gmail.com>
2011-01-14power_supply: Add MAX17042 Fuel Gauge DriverMyungJoo Ham1-0/+30
The MAX17042 is a fuel gauge with an I2C interface for lithium-ion betteries. Unlike its predecessor MAX17040, MAX17042 uses 16bit registers. Besides, MAX17042 has much more features than MAX17040; e.g., a thermistor, current and current accumulation measurement, battery internal resistance estimate, average values of measurement, and others. This patch implements a driver for MAX17042. In this initial release, we have implemented the most basic features of a fuel gauge: measure the battery capacity and voltage. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-11-18power_supply: Add gpio charger driverLars-Peter Clausen1-0/+41
This patch adds a simple driver for chargers indicating their online status through a GPIO pin. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-08-05POWER: Add JZ4740 battery driver.Lars-Peter Clausen1-0/+24
Add support for the battery voltage measurement part of the JZ4740 ADC unit. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1416/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.