aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/pxa2xx_ssp.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-08-14ARM: pxa: ssp: add pxa_ssp_request_of()Daniel Mack1-0/+11
Add a function to lookup ssp devices from device tree. This way, users can reference the ssp devices in order to register to them. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-02-08spi/pxa2xx: add support for Intel Low Power Subsystem SPIMika Westerberg1-0/+9
Intel LPSS SPI is pretty much the same as the PXA27xx SPI except that it has few additional features over the original: o FIFO depth is 256 entries o RX FIFO has one watermark o TX FIFO has two watermarks, low and high o chip select can be controlled by writing to a register The new FIFO registers follow immediately the PXA27xx registers but then there are some additional LPSS private registers at offset 1k or 2k from the base address. For these private registers we add new accessors that take advantage of drv_data->lpss_base once it is resolved. We add a new type LPSS_SSP that can be used to distinguish the LPSS devices from others. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Lu Cao <lucao@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08spi/pxa2xx: embed the ssp_device to platform dataMika Westerberg1-0/+9
The spi-pxa2xx-pci glue driver had to implement pxa_ssp_request()/free() in order to support the spi-pxa2xx platform driver. Since the ACPI enabled platforms can use the same platform driver we would need to implement pxa_ssp_request()/free() in some central place that can be shared by the ACPI and PCI glue code. Instead of doing that we can make pxa_ssp_request()/free() to be available only when CONFIG_ARCH_PXA is set. On other arches these are being stubbed out in preference to passing the ssp_device from the platform data directly. We also change the SPI bus number to be taken from ssp->port_id instead of platform device id. This way the supporting code that passes the ssp can decide the number (or it can set it to the same as pdev->id). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11ASoC: fix pxa-ssp compiling issue under mach-mmpQiao Zhou1-0/+1
pxa-ssp.c uses API like cpu_is_pxa3xx(), cpu_is_pxa2xx(), which is defined under arch-pxa architecture, and drivers under mach-mmp can't find it. so just use ssp->type to replace that API. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11ARM: MMP: add pxa910-ssp into ssp_id_tableQiao Zhou1-0/+1
add pxa910-ssp into ssp_id_table, and fix pxa-ssp compiling issue under mach-mmp architect. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-12-02spi/pxa2xx: Add chipselect support for SodavilleSebastian Andrzej Siewior1-0/+2
The SPI core on Sodaville supports chip selects. Its configuration moved into the SSSR register at bit 0 and 1. Thus Sodaville can be hooked up with up to 4 devices. This patch ensures that the bits which are otherwiese reserved are only touched on Sodaville and not on any other PXAs. Also it makes sure that the status register does not lose the CS information while clearing the ROR bit. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
2010-12-01spi/pxa2xx: Consider CE4100's FIFO depthSebastian Andrzej Siewior1-6/+26
For PXA the default threshold is FIFO_DEPTH / 2. Adjust this value for CE4100. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
2010-12-01arm/pxa2xx: reorgazine SSP and SPI header filesSebastian Andrzej Siewior1-0/+187
The PXA-SPI driver relies on some files / defines which are arm specific and are within the ARM tree. The CE4100 SoC which is x86 has also the SPI core. This patch moves the ssp and spi files from arm/mach-pxa and plat-pxa to include/linux where the CE4100 can access them. This move got verified by building the following defconfigs: cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig raumfeld_defconfig magician_defconfig Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>