| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As Oleg pointed out in [0] uprobe should not use the ptrace interface
for enabling/disabling single stepping.
[0] http://lkml.kernel.org/r/20120730141638.GA5306@redhat.com
Add the new "__weak arch" helpers which simply call user_*_single_step()
as a preparation. This is only needed to not break the powerpc port, we
will fold this logic into arch_uprobe_pre/post_xol() hooks later.
We should also change handle_singlestep(), _disable_step(&uprobe->arch)
should be called before put_uprobe().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
|
|
Nobody does set_orig_insn(verify => false), and I think nobody will.
Remove this argument. IIUC set_orig_insn(verify => false) was needed
to single-step without xol area.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
|
|
Now that we have uprobe_dup_mmap() we can fold uprobe_reset_state()
into the new hook and remove it. mmput()->uprobe_clear_state() can't
be called before dup_mmap().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
|
|
Add the new MMF_HAS_UPROBES flag. It is set by install_breakpoint()
and it is copied by dup_mmap(), uprobe_pre_sstep_notifier() checks
it to avoid the slow path if the task was never probed. Perhaps it
makes sense to check it in valid_vma(is_register => false) as well.
This needs the new dup_mmap()->uprobe_dup_mmap() hook. We can't use
uprobe_reset_state() or put MMF_HAS_UPROBES into MMF_INIT_MASK, we
need oldmm->mmap_sem to avoid the race with uprobe_register() or
mmap() from another thread.
Currently we never clear this bit, it can be false-positive after
uprobe_unregister() or uprobe_munmap() or if dup_mmap() hits the
probed VM_DONTCOPY vma. But this is fine correctness-wise and has
no effect unless the task hits the non-uprobe breakpoint.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
|
|
uprobes_state->count is only needed to avoid the slow path in
uprobe_pre_sstep_notifier(). It is also checked in uprobe_munmap()
but ironically its only goal to decrement this counter. However,
it is very broken. Just some examples:
- uprobe_mmap() can race with uprobe_unregister() and wrongly
increment the counter if it hits the non-uprobe "int3". Note
that install_breakpoint() checks ->consumers first and returns
-EEXIST if it is NULL.
"atomic_sub() if error" in uprobe_mmap() looks obviously wrong
too.
- uprobe_munmap() can race with uprobe_register() and wrongly
decrement the counter by the same reason.
- Suppose an appication tries to increase the mmapped area via
sys_mremap(). vma_adjust() does uprobe_munmap(whole_vma) first,
this can nullify the counter temporarily and race with another
thread which can hit the bp, the application will be killed by
SIGTRAP.
- Suppose an application mmaps 2 consecutive areas in the same file
and one (or both) of these areas has uprobes. In the likely case
mmap_region()->vma_merge() suceeds. Like above, this leads to
uprobe_munmap/uprobe_mmap from vma_merge()->vma_adjust() but then
mmap_region() does another uprobe_mmap(resulting_vma) and doubles
the counter.
This patch only removes this counter and fixes the compile errors,
then we will try to cleanup the changed code and add something else
instead.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
|
|
Uprobes has a callback (uprobe_munmap()) in the unmap path to
maintain the uprobes count.
In the exit path this callback gets called in unlink_file_vma().
However by the time unlink_file_vma() is called, the pages would
have been unmapped (in unmap_vmas()) and the task->rss_stat counts
accounted (in zap_pte_range()).
If the exiting process has probepoints, uprobe_munmap() checks if
the breakpoint instruction was around before decrementing the probe
count.
This results in a file backed page being reread by uprobe_munmap()
and hence it does not find the breakpoint.
This patch fixes this problem by moving the callback to
unmap_single_vma(). Since unmap_single_vma() may not unmap the
complete vma, add start and end parameters to uprobe_munmap().
This bug became apparent courtesy of commit c3f0327f8e9d
("mm: add rss counters consistency check").
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120411103527.23245.9835.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Maintain a per-mm counter: number of uprobes that are inserted
on this process address space.
This counter can be used at probe hit time to determine if we
need a lookup in the uprobes rbtree. Everytime a probe gets
inserted successfully, the probe count is incremented and
everytime a probe gets removed, the probe count is decremented.
The new uprobe_munmap hook ensures the count is correct on a
unmap or remap of a region. We expect that once a
uprobe_munmap() is called, the vma goes away. So
uprobe_unregister() finding a probe to unregister would either
mean unmap event hasnt occurred yet or a mmap event on the same
executable file occured after a unmap event.
Additionally, uprobe_mmap hook now also gets called:
a. on every executable vma that is COWed at fork.
b. a vma of interest is newly mapped; breakpoint insertion also
happens at the required address.
On process creation, make sure the probes count in the child is
set correctly.
Special cases that are taken care include:
a. mremap
b. VM_DONTCOPY vmas on fork()
c. insertion/removal races in the parent during fork().
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120330182646.10018.85805.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Uprobes executes the original instruction at a probed location
out of line. For this, we allocate a page (per mm) upon the
first uprobe hit, in the process user address space, divide it
into slots that are used to store the actual instructions to be
singlestepped. These slots are known as xol (execution out of
line) slots.
Care is taken to ensure that the allocation is in an unmapped
area as close to the top of the user address space as possible,
with appropriate permission settings to keep selinux like
frameworks happy.
Upon a uprobe hit, a free slot is acquired, and is released
after the singlestep completes.
Lots of improvements courtesy suggestions/inputs from Peter and
Oleg.
[ Folded a fix for build issue on powerpc fixed and reported by
Stephen Rothwell. ]
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Uprobes uses exception notifiers to get to know if a thread hit
a breakpoint or a singlestep exception.
When a thread hits a uprobe or is singlestepping post a uprobe
hit, the uprobe exception notifier sets its TIF_UPROBE bit,
which will then be checked on its return to userspace path
(do_notify_resume() ->uprobe_notify_resume()), where the
consumers handlers are run (in task context) based on the
defined filters.
Uprobe hits are thread specific and hence we need to maintain
information about if a task hit a uprobe, what uprobe was hit,
the slot where the original instruction was copied for xol so
that it can be singlestepped with appropriate fixups.
In some cases, special care is needed for instructions that are
executed out of line (xol). These are architecture specific
artefacts, such as handling RIP relative instructions on x86_64.
Since the instruction at which the uprobe was inserted is
executed out of line, architecture specific fixups are added so
that the thread continues normal execution in the presence of a
uprobe.
Postpone the signals until we execute the probed insn.
post_xol() path does a recalc_sigpending() before return to
user-mode, this ensures the signal can't be lost.
Uprobes relies on DIE_DEBUG notification to notify if a
singlestep is complete.
Adds x86 specific uprobe exception notifiers and appropriate
hooks needed to determine a uprobe hit and subsequent post
processing.
Add requisite x86 fixups for xol for uprobes. Specific cases
needing fixups include relative jumps (x86_64), calls, etc.
Where possible, we check and skip singlestepping the
breakpointed instructions. For now we skip single byte as well
as few multibyte nop instructions. However this can be extended
to other instructions too.
Credits to Oleg Nesterov for suggestions/patches related to
signal, breakpoint, singlestep handling code.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com
[ Performed various cleanliness edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
bkpt doesnt seem to be a correct abbrevation for breakpoint.
Choice was between bp and breakpoint. Since bp can refer to
things other than breakpoint, use swbp to refer to breakpoints.
This is pure cleanup, no functional change intended.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120312092545.5379.91251.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
If a function takes struct uprobe or struct arch_uprobe, then it
is passed as the first parameter.
This is pure cleanup, no functional change intended.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120312092530.5379.18394.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Rename macros that refer to individual uprobe to start with
UPROBE_ instead of UPROBES_.
This is pure cleanup, no functional change intended.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120312092514.5379.36595.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add Peter Zijlstra's copyright to the uprobes code, whose
contributions to the uprobes code are not visible in the Git
history, because they were backmerged.
Also update existing copyright notices to the year 2012.
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-vjqxst502pc1efz7ah8cyht4@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Few cleanups suggested by Ingo Molnar.
- Rename struct uprobe_arch_info to struct arch_uprobe.
- Move insn from struct uprobe to struct arch_uprobe.
- Make arch specific uprobe functions to accept struct arch_uprobe
instead of struct uprobe.
- Move struct uprobe to kernel/uprobes.c from include/linux/uprobes.h
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Stone <jistone@redhat.com>
Link: http://lkml.kernel.org/r/20120222091602.15880.40249.sendpatchset@srdronam.in.ibm.com
[ Made various small improvements ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
uprobe_opcode_sz refers to the smallest instruction size for
that architecture. UPROBES_BKPT_INSN_SIZE refers to the size of
the breakpoint instruction for that architecture.
For now we are assuming that both uprobe_opcode_sz and
UPROBES_BKPT_INSN_SIZE are the same for all archs and hence
removing uprobe_opcode_sz in favour of UPROBES_BKPT_INSN_SIZE.
However if we have to support architectures where the smallest
instruction size is different from the size of breakpoint
instruction, we may have to re-introduce uprobe_opcode_sz.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Stone <jistone@redhat.com>
Link: http://lkml.kernel.org/r/20120222091549.15880.67020.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Make the uprobes code readable to me:
- improve the Kconfig text so that a mere mortal gets some idea
what CONFIG_UPROBES=y is really about
- do trivial renames to standardize around the uprobes_*() namespace
- clean up and simplify various code flow details
- separate basic blocks of functionality
- line break artifact and white space related removal
- use standard local varible definition blocks
- use vertical spacing to make things more readable
- remove unnecessary volatile
- restructure comment blocks to make them more uniform and
more readable in general
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Link: http://lkml.kernel.org/n/tip-ewbwhb8o6navvllsauu7k07p@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add uprobes support to the core kernel, with x86 support.
This commit adds the kernel facilities, the actual uprobes
user-space ABI and perf probe support comes in later commits.
General design:
Uprobes are maintained in an rb-tree indexed by inode and offset
(the offset here is from the start of the mapping). For a unique
(inode, offset) tuple, there can be at most one uprobe in the
rb-tree.
Since the (inode, offset) tuple identifies a unique uprobe, more
than one user may be interested in the same uprobe. This provides
the ability to connect multiple 'consumers' to the same uprobe.
Each consumer defines a handler and a filter (optional). The
'handler' is run every time the uprobe is hit, if it matches the
'filter' criteria.
The first consumer of a uprobe causes the breakpoint to be
inserted at the specified address and subsequent consumers are
appended to this list. On subsequent probes, the consumer gets
appended to the existing list of consumers. The breakpoint is
removed when the last consumer unregisters. For all other
unregisterations, the consumer is removed from the list of
consumers.
Given a inode, we get a list of the mms that have mapped the
inode. Do the actual registration if mm maps the page where a
probe needs to be inserted/removed.
We use a temporary list to walk through the vmas that map the
inode.
- The number of maps that map the inode, is not known before we
walk the rmap and keeps changing.
- extending vm_area_struct wasn't recommended, it's a
size-critical data structure.
- There can be more than one maps of the inode in the same mm.
We add callbacks to the mmap methods to keep an eye on text vmas
that are of interest to uprobes. When a vma of interest is mapped,
we insert the breakpoint at the right address.
Uprobe works by replacing the instruction at the address defined
by (inode, offset) with the arch specific breakpoint
instruction. We save a copy of the original instruction at the
uprobed address.
This is needed for:
a. executing the instruction out-of-line (xol).
b. instruction analysis for any subsequent fixups.
c. restoring the instruction back when the uprobe is unregistered.
We insert or delete a breakpoint instruction, and this
breakpoint instruction is assumed to be the smallest instruction
available on the platform. For fixed size instruction platforms
this is trivially true, for variable size instruction platforms
the breakpoint instruction is typically the smallest (often a
single byte).
Writing the instruction is done by COWing the page and changing
the instruction during the copy, this even though most platforms
allow atomic writes of the breakpoint instruction. This also
mirrors the behaviour of a ptrace() memory write to a PRIVATE
file map.
The core worker is derived from KSM's replace_page() logic.
In essence, similar to KSM:
a. allocate a new page and copy over contents of the page that
has the uprobed vaddr
b. modify the copy and insert the breakpoint at the required
address
c. switch the original page with the copy containing the
breakpoint
d. flush page tables.
replace_page() is being replicated here because of some minor
changes in the type of pages and also because Hugh Dickins had
plans to improve replace_page() for KSM specific work.
Instruction analysis on x86 is based on instruction decoder and
determines if an instruction can be probed and determines the
necessary fixups after singlestep. Instruction analysis is done
at probe insertion time so that we avoid having to repeat the
same analysis every time a probe is hit.
A lot of code here is due to the improvement/suggestions/inputs
from Peter Zijlstra.
Changelog:
(v10):
- Add code to clear REX.B prefix as suggested by Denys Vlasenko
and Masami Hiramatsu.
(v9):
- Use insn_offset_modrm as suggested by Masami Hiramatsu.
(v7):
Handle comments from Peter Zijlstra:
- Dont take reference to inode. (expect inode to uprobe_register to be sane).
- Use PTR_ERR to set the return value.
- No need to take reference to inode.
- use PTR_ERR to return error value.
- register and uprobe_unregister share code.
(v5):
- Modified del_consumer as per comments from Peter.
- Drop reference to inode before dropping reference to uprobe.
- Use i_size_read(inode) instead of inode->i_size.
- Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called.
- Includes errno.h as recommended by Stephen Rothwell to fix a build issue
on sparc defconfig
- Remove restrictions while unregistering.
- Earlier code leaked inode references under some conditions while
registering/unregistering.
- Continue the vma-rmap walk even if the intermediate vma doesnt
meet the requirements.
- Validate the vma found by find_vma before inserting/removing the
breakpoint
- Call del_consumer under mutex_lock.
- Use hash locks.
- Handle mremap.
- Introduce find_least_offset_node() instead of close match logic in
find_uprobe
- Uprobes no more depends on MM_OWNER; No reference to task_structs
while inserting/removing a probe.
- Uses read_mapping_page instead of grab_cache_page so that the pages
have valid content.
- pass NULL to get_user_pages for the task parameter.
- call SetPageUptodate on the new page allocated in write_opcode.
- fix leaking a reference to the new page under certain conditions.
- Include Instruction Decoder if Uprobes gets defined.
- Remove const attributes for instruction prefix arrays.
- Uses mm_context to know if the application is 32 bit.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Also-written-by: Jim Keniston <jkenisto@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com
[ Made various small edits to the commit log ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
Sebastian Andrzej Siewior
Oleg Nesterov
Srikar Dronamraju
Ingo Molnar