| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Make the I2C Level Translator included in PCA9450 configurable from
devicetree. The reset state is off. By setting nxp,i2c-lt-enable, the
I2C Level Translator will be enabled while in STANDBY or RUN state.
Signed-off-by: Per-Daniel Olsson <perdo@axis.com>
Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Link: https://lore.kernel.org/r/20220429072211.24957-2-rickaran@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Saeed Mahameed says:
====================
mlx5-updates-2022-05-02
1) Trivial Misc updates to mlx5 driver
2) From Mark Bloch: Flow steering, general steering refactoring/cleaning
An issue with flow steering deletion flow (when creating a rule without
dests) turned out to be easy to fix but during the fix some issue
with the flow steering creation/deletion flows have been found.
The following patch series tries to fix long standing issues with flow
steering code and hopefully preventing silly future bugs.
A) Fix an issue where a proper dest type wasn't assigned.
B) Refactor and fix dests enums values, refactor deletion
function and do proper bookkeeping of dests.
C) Change mlx5_del_flow_rules() to delete rules when there are no
no more rules attached associated with an FTE.
D) Don't call hard coded deletion function but use the node's
defined one.
E) Add a WARN_ON() to catch future bugs when an FTE with dests
is deleted.
* tag 'mlx5-updates-2022-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: fs, an FTE should have no dests when deleted
net/mlx5: fs, call the deletion function of the node
net/mlx5: fs, delete the FTE when there are no rules attached to it
net/mlx5: fs, do proper bookkeeping for forward destinations
net/mlx5: fs, add unused destination type
net/mlx5: fs, jump to exit point and don't fall through
net/mlx5: fs, refactor software deletion rule
net/mlx5: fs, split software and IFC flow destination definitions
net/mlx5e: TC, set proper dest type
net/mlx5e: Remove unused mlx5e_dcbnl_build_rep_netdev function
net/mlx5e: Drop error CQE handling from the XSK RX handler
net/mlx5: Print initializing field in case of timeout
net/mlx5: Delete redundant default assignment of runtime devlink params
net/mlx5: Remove useless kfree
net/mlx5: use kvfree() for kvzalloc() in mlx5_ct_fs_smfs_matcher_create
====================
Link: https://lore.kernel.org/r/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch introdues the SYSCTL_THREE.
KUnit:
[00:10:14] ================ sysctl_test (10 subtests) =================
[00:10:14] [PASSED] sysctl_test_api_dointvec_null_tbl_data
[00:10:14] [PASSED] sysctl_test_api_dointvec_table_maxlen_unset
[00:10:14] [PASSED] sysctl_test_api_dointvec_table_len_is_zero
[00:10:14] [PASSED] sysctl_test_api_dointvec_table_read_but_position_set
[00:10:14] [PASSED] sysctl_test_dointvec_read_happy_single_positive
[00:10:14] [PASSED] sysctl_test_dointvec_read_happy_single_negative
[00:10:14] [PASSED] sysctl_test_dointvec_write_happy_single_positive
[00:10:14] [PASSED] sysctl_test_dointvec_write_happy_single_negative
[00:10:14] [PASSED] sysctl_test_api_dointvec_write_single_less_int_min
[00:10:14] [PASSED] sysctl_test_api_dointvec_write_single_greater_int_max
[00:10:14] =================== [PASSED] sysctl_test ===================
./run_kselftest.sh -c sysctl
...
ok 1 selftests: sysctl: sysctl.sh
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Simon Horman <horms@verge.net.au>
Cc: Julian Anastasov <ja@ssi.bg>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenz Bauer <lmb@cloudflare.com>
Cc: Akhmat Karakotov <hmukos@yandex-team.ru>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Linux 5.18-rc5
There was a build fix for arm I wanted in drm-next, so backmerge rather then cherry-pick.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Some ChromeOS EC devices (such as the Framework Laptop) only map I/O
ports 0x800-0x807. Making the larger reservation required by the non-MEC
LPC (the 0xFF ports for the memory map, and the 0xFF ports for the
parameter region) is non-viable on these devices.
Since we probe the MEC EC first, we can get away with a smaller
reservation that covers the MEC EC ports. If we fall back to classic
LPC, we can grow the reservation to cover the memory map and the
parameter region.
cros_ec_lpc_probe also interacted with I/O ports 0x800-0x807 without a
reservation. Restructuring the code to request the MEC LPC region first
obviates the need to do so.
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220217165930.15081-3-dustin@howett.net
|
|
When the caller doesn't pass a destination fs_core will create a unused
rule just so a context can be returned. This unused rule
is zeroed out and its type is 0 which can be mixed up with
MLX5_FLOW_DESTINATION_TYPE_VPORT.
Create a dedicated type to differentiate between the two
named MLX5_FLOW_DESTINATION_TYPE_NONE.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Separate flow destinations between software and IFC.
Flow destination type passed by callers was used as the input in
firmware commands and over the years software only types were added
which resulted in mixing between the two.
Create an IFC enum that contains only the flow destinations defined
when talking to the firmware.
Now that there is a proper software only enum for flow destinations
the hardcoded values can be removed as the values are no longer used
in firmware commands.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
====================
pull-request: ieee802154-next 2022-05-01
Miquel Raynal landed two patch series bundled in this pull request.
The first series re-works the symbol duration handling to better
accommodate the needs of the various phy layers in ieee802154.
In the second series Miquel improves th errors handling from drivers
up mac802154. THis streamlines the error handling throughout the
ieee/mac802154 stack in preparation for sync TX to be introduced for
MLME frames.
====================
Link: https://lore.kernel.org/r/20220501194614.1198325-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kthread_blkcg is only used by the built-in blk-cgroup code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove all the includes that aren't actually needed from
<linux/blk-cgroup.h> and push them to the actual source files where
needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No need to make BLK_CGROUP stubs conditional on CONFIG_BLOCK as they
can't be used without that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All callers of bio_blkcg actually want the CSS, so replace it with an
interface that does return the CSS. This now allows to move
struct blkcg_gq to block/blk-cgroup.h instead of exposing it in a
public header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass the cgroup_subsys_state instead of a the blkg so that blktrace
doesn't need to poke into blk-cgroup internals, and give the name a
blk prefix as the current name is way too generic for a public
interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no real need to expose the blkcg structure to the whole kernel.
Move it to the private header an expose a helper to let the writeback
code access the cgwb_list member.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move these two functions out of line as there is no good reason
to inline them. Also switch to passing a cgroup_subsys_state
instead of doing the conversion in the caller to prepare for making
the blkcg structure private to blk-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no urgent need to inline this function, so move it out of line.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No need to have these helpers inline. Also remove the stubs and just use
an IS_ENABLED for the get side (the set side already is only built
conditionlly).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For TDX guests, the maximum number of vcpus needs to be specified when the
TDX guest VM is initialized (creating the TDX data corresponding to TDX
guest) before creating vcpu. It needs to record the maximum number of
vcpus on VM creation (KVM_CREATE_VM) and return error if the number of
vcpus exceeds it
Because there is already max_vcpu member in arm64 struct kvm_arch, move it
to common struct kvm and initialize it to KVM_MAX_VCPUS before
kvm_arch_init_vm() instead of adding it to x86 struct kvm_arch.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <e53234cdee6a92357d06c80c03d77c19cdefb804.1646422845.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The NVMe co-processor on the Apple M1 uses a DMA address filter called
SART for some DMA transactions. This adds a simple driver used to
configure the memory regions from which DMA transactions are allowed.
Unlike a real IOMMU, SART does not support any pagetables and can't be
implemented inside the IOMMU subsystem using iommu_ops.
It also can't be implemented using dma_map_ops since not all DMA
transactions of the NVMe controller are filtered by SART.
Instead, most buffers have to be registered using the integrated NVMe
IOMMU and we can't have two separate dma_map_ops implementations for a
single device.
Co-developed-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the kernfs/driver core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
intel-gpio for v5.19-1
* Introduce helpers to iterate over GPIO chip nodes and covert some drivers
gpiolib:
- Introduce a helper to get first GPIO controller node
- Introduce gpiochip_node_count() helper
- Introduce for_each_gpiochip_node() loop helper
pinctrl:
- meson: Replace custom code by gpiochip_node_count() call
- meson: Enable COMPILE_TEST
- meson: Rename REG_* to MESON_REG_*
- armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()
- armada-37xx: Switch to use fwnode instead of of_node
- samsung: Switch to use for_each_gpiochip_node() helper
- samsung: Drop redundant node parameter in samsung_banks_of_node_get()
- npcm7xx: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Replace custom code by gpiochip_node_count() call
- stm32: Switch to use for_each_gpiochip_node() helper
- stm32: Replace custom code by gpiochip_node_count() call
|
|
The "Extended Address Register" is winbond specific. If the flash is
larger than 16MiB and is used in 3 byte address mode, it is used to set
the remaining address bits. Move the write_ear() function, the opcode
macros and the spimem op template into the winbond module and rename
them accordingly.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220429100153.2338501-1-michael@walle.cc
|
|
max field holds the largest slab order that was ever used for a slab cache.
But it's unused now. Remove it.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20220429090545.33413-1-linmiaohe@huawei.com
|
|
The comment next to the __assume_kmalloc_alignment definition is not
precise: kmalloc relies on kmem_cache_alloc, so kmalloc technically returns
pointers aligned to both ARCH_KMALLOC_MINALIGN and ARCH_SLAB_MINALIGN,
not only to ARCH_KMALLOC_MINALIGN.
(See create_kmalloc_cache()->create_boot_cache()->calculate_alignment()
for SLAB and SLUB and __do_kmalloc_node() for SLOB.)
Clarify the comment.
The assumption specified by __assume_kmalloc_alignment is still correct,
although it can be made stronger. I'll leave this to a separate patch.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/84d8142747230f2015eaf9705ee7c2e1a9f56596.1651161548.git.andreyknvl@google.com
|
|
The comment next to the ARCH_KMALLOC_MINALIGN definition says that
ARCH_KMALLOC_MINALIGN can be defined in arch headers. This is incorrect:
it's actually ARCH_DMA_MINALIGN that can be defined there.
Fix the comment.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/fe1ca7a25a054b61d1038686d07569416e287e7b.1651161548.git.andreyknvl@google.com
|
|
Merge in Linux 5.18-rc5 since new code to the STM32 driver
depend in a non-trivial way on the fixes merged in -rc5.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Define a function named fsverity_get_digest() to return the verity file
digest and the associated hash algorithm (enum hash_algo).
This assumes that before calling fsverity_get_digest() the file must have
been opened, which is even true for the IMA measure/appraise on file
open policy rule use case (func=FILE_CHECK). do_open() calls vfs_open()
immediately prior to ima_file_check().
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Pull x86 fixes from Borislav Petkov:
- A fix to disable PCI/MSI[-X] masking for XEN_HVM guests as that is
solely controlled by the hypervisor
- A build fix to make the function prototype (__warn()) as visible as
the definition itself
- A bunch of objtool annotation fixes which have accumulated over time
- An ORC unwinder fix to handle bad input gracefully
- Well, we thought the microcode gets loaded in time in order to
restore the microcode-emulated MSRs but we thought wrong. So there's
a fix for that to have the ordering done properly
- Add new Intel model numbers
- A spelling fix
* tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests
bug: Have __warn() prototype defined unconditionally
x86/Kconfig: fix the spelling of 'becoming' in X86_KERNEL_IBT config
objtool: Use offstr() to print address of missing ENDBR
objtool: Print data address for "!ENDBR" data warnings
x86/xen: Add ANNOTATE_NOENDBR to startup_xen()
x86/uaccess: Add ENDBR to __put_user_nocheck*()
x86/retpoline: Add ANNOTATE_NOENDBR for retpolines
x86/static_call: Add ANNOTATE_NOENDBR to static call trampoline
objtool: Enable unreachable warnings for CLANG LTO
x86,objtool: Explicitly mark idtentry_body()s tail REACHABLE
x86,objtool: Mark cpu_startup_entry() __noreturn
x86,xen,objtool: Add UNWIND hint
lib/strn*,objtool: Enforce user_access_begin() rules
MAINTAINERS: Add x86 unwinding entry
x86/unwind/orc: Recheck address range after stack info was updated
x86/cpu: Load microcode during restore_processor_state()
x86/cpu: Add new Alderlake and Raptorlake CPU model numbers
|
|
This patch is needed because the BASE-T1 uses different registers
for status, control and advertisement to those already
employed in the existing phy-c45 functions.
Where required, genphy_c45 functions will now check whether
the device supports BASE-T1 and use the specific registers
instead: 45.2.7.19 BASE-T1 AN control register,
45.2.7.20 BASE-T1 AN status, 45.2.7.21 BASE-T1 AN
advertisement register, 45.2.7.22 BASE-T1 AN LP Base
Page ability register, 45.2.1.185 BASE-T1 PMA/PMD control
register.
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add entry for the 10base-T1L full duplex mode.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Apple SoCs such as the M1 come with multiple embedded co-processors
running proprietary firmware. Communication with those is established
over a simple mailbox using the RTKit IPC protocol.
This cannot be implemented inside the mailbox subsystem since on top
of communication over channels we also need support for starting,
hibernating and resetting these co-processors. We also need to
handle shared memory allocations differently depending on the
co-processor and don't want to split that across multiple drivers.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
Based on DesignWare Ethernet QoS datasheet, we are seeing the limitation
of Split Header (SPH) feature is not supported for Ipv4 fragmented packet.
This SPH limitation will cause ping failure when the packets size exceed
the MTU size. For example, the issue happens once the basic ping packet
size is larger than the configured MTU size and the data is lost inside
the fragmented packet, replaced by zeros/corrupted values, and leads to
ping fail.
So, disable the Split Header for Intel platforms.
v2: Add fixes tag in commit message.
Fixes: 67afd6d1cfdf("net: stmmac: Add Split Header support and enable it in XGMAC cores")
Cc: <stable@vger.kernel.org> # 5.10.x
Suggested-by: Ong, Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
flush_smp_call_function_queue() invokes do_softirq() which is not available
on PREEMPT_RT. flush_smp_call_function_queue() is invoked from the idle
task and the migration task with preemption or interrupts disabled.
So RT kernels cannot process soft interrupts in that context as that has to
acquire 'sleeping spinlocks' which is not possible with preemption or
interrupts disabled and forbidden from the idle task anyway.
The currently known SMP function call which raises a soft interrupt is in
the block layer, but this functionality is not enabled on RT kernels due to
latency and performance reasons.
RT could wake up ksoftirqd unconditionally, but this wants to be avoided if
there were soft interrupts pending already when this is invoked in the
context of the migration task. The migration task might have preempted a
threaded interrupt handler which raised a soft interrupt, but did not reach
the local_bh_enable() to process it. The "running" ksoftirqd might prevent
the handling in the interrupt thread context which is causing latency
issues.
Add a new function which handles this case explicitely for RT and falls
back to do_softirq() on !RT kernels. In the RT case this warns when one of
the flushed SMP function calls raised a soft interrupt so this can be
investigated.
[ tglx: Moved the RT part out of SMP code ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/YgKgL6aPj8aBES6G@linutronix.de
Link: https://lore.kernel.org/r/20220413133024.356509586@linutronix.de
|
|
A W=1 build emits more than a dozen missing prototype warnings related to
scheduler and scheduler specific includes.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220413133024.249118058@linutronix.de
|
|
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.18-rc5 for some
reported issues and new quirks. They include:
- dwc3 driver fixes
- xhci driver fixes
- typec driver fixes
- new usb-serial driver ids
- added new USB devices to existing quirk tables
- other tiny fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits)
usb: phy: generic: Get the vbus supply
usb: dwc3: gadget: Return proper request status
usb: dwc3: pci: add support for the Intel Meteor Lake-P
usb: dwc3: core: Only handle soft-reset in DCTL
usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()
usb: misc: eud: Fix an error handling path in eud_probe()
usb: core: Don't hold the device lock while sleeping in do_proc_control()
usb: dwc3: Try usb-role-switch first in dwc3_drd_init
usb: dwc3: core: Fix tx/rx threshold settings
usb: mtu3: fix USB 3.0 dual-role-switch from device to host
xhci: Enable runtime PM on second Alderlake controller
usb: dwc3: fix backwards compat with rockchip devices
dt-bindings: usb: samsung,exynos-usb2: add missing required reg
usb: misc: fix improper handling of refcount in uss720_probe()
USB: Fix ehci infinite suspend-resume loop issue in zhaoxin
usb: typec: tcpm: Fix undefined behavior due to shift overflowing the constant
usb: typec: rt1719: Fix build error without CONFIG_POWER_SUPPLY
usb: typec: ucsi: Fix role swapping
usb: typec: ucsi: Fix reuse of completion structure
usb: xhci: tegra:Fix PM usage reference leak of tegra_xusb_unpowergate_partitions
...
|
|
Some use cases don't always need an IPI when sending a TWA_SIGNAL
notification. Add TWA_SIGNAL_NO_IPI, which is just like TWA_SIGNAL, except
it doesn't send an IPI to the target task. It merely sets
TIF_NOTIFY_SIGNAL and wakes up the task.
This can be useful in avoiding a forceful transition to the kernel if the
task is running in userspace. Depending on the task_work in question, it
may be quite fine waiting for the next reschedule or kernel enter anyway,
or the use case may even have other mechanisms for hinting to the task
that a transition may be useful. This can drive more cooperative
scheduling of task_work.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/821f42b6-7d91-8074-8212-d34998097de4@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Starting from the blamed commit, the lan966x build fails with the
following compilation error:
drivers/net/ethernet/microchip/lan966x/lan966x_ptp.c:342:9: error: implicit declaration of function ‘ptp_find_pin_unlocked’ [-Werror=implicit-function-declaration]
342 | pin = ptp_find_pin_unlocked(phc->clock, PTP_PF_EXTTS, 0);
The issue is that there is no stub function for ptp_find_pin_unlocked
in case CONFIG_PTP_1588_CLOCK is not selected. Therefore add one.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: f3d8e0a9c28ba0 ("net: lan966x: Add support for PTP_PF_EXTTS")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Inline dev_queue_xmit() and dev_queue_xmit_accel(), they both are small
proxy functions doing nothing but redirecting the control flow to
__dev_queue_xmit().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb_zerocopy_iter_dgram() is a small proxy function, inline it. For
that, move __zerocopy_sg_from_iter into linux/skbuff.h
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge net branch with the required patch for supporting the io_uring
feature that passes back whether we had more data in the socket or not.
* 'tcp-pass-back-data-left-in-socket-after-receive' of git://git.kernel.org/pub/scm/linux/kernel/git/kuba/linux:
tcp: pass back data left in socket after receive
|
|
* for-5.19/io_uring-socket: (73 commits)
io_uring: use the text representation of ops in trace
io_uring: rename op -> opcode
io_uring: add io_uring_get_opcode
io_uring: add type to op enum
io_uring: add socket(2) support
net: add __sys_socket_file()
io_uring: fix trace for reduced sqe padding
io_uring: add fgetxattr and getxattr support
io_uring: add fsetxattr and setxattr support
fs: split off do_getxattr from getxattr
fs: split off setxattr_copy and do_setxattr function from setxattr
io_uring: return an error when cqe is dropped
io_uring: use constants for cq_overflow bitfield
io_uring: rework io_uring_enter to simplify return value
io_uring: trace cqe overflows
io_uring: add trace support for CQE overflow
io_uring: allow re-poll if we made progress
io_uring: support MSG_WAITALL for IORING_OP_SEND(MSG)
io_uring: add support for IORING_ASYNC_CANCEL_ANY
io_uring: allow IORING_OP_ASYNC_CANCEL with 'fd' key
...
|
|
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is currently done for CMSG_INQ, add an ability to do so via struct
msghdr as well and have CMSG_INQ use that too. If the caller sets
msghdr->msg_get_inq, then we'll pass back the hint in msghdr->msg_inq.
Rearrange struct msghdr a bit so we can add this member while shrinking
it at the same time. On a 64-bit build, it was 96 bytes before this
change and 88 bytes afterwards.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/650c22ca-cffc-0255-9a05-2413a1e20826@kernel.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PT_DTRACE is only used on um now, fix the wrong comment.
Link: https://lkml.kernel.org/r/1649240981-11024-3-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ep_poll() first calls ep_events_available() with no lock held and checks
if ep->rdllist is empty by list_empty_careful(), which reads
rdllist->prev. Thus all accesses to it need some protection to avoid
store/load-tearing.
Note INIT_LIST_HEAD_RCU() already has the annotation for both prev
and next.
Commit bf3b9f6372c4 ("epoll: Add busy poll support to epoll with socket
fds.") added the first lockless ep_events_available(), and commit
c5a282e9635e ("fs/epoll: reduce the scope of wq lock in epoll_wait()")
made some ep_events_available() calls lockless and added single call under
a lock, finally commit e59d3c64cba6 ("epoll: eliminate unnecessary lock
for zero timeout") made the last ep_events_available() lockless.
BUG: KCSAN: data-race in do_epoll_wait / do_epoll_wait
write to 0xffff88810480c7d8 of 8 bytes by task 1802 on cpu 0:
INIT_LIST_HEAD include/linux/list.h:38 [inline]
list_splice_init include/linux/list.h:492 [inline]
ep_start_scan fs/eventpoll.c:622 [inline]
ep_send_events fs/eventpoll.c:1656 [inline]
ep_poll fs/eventpoll.c:1806 [inline]
do_epoll_wait+0x4eb/0xf40 fs/eventpoll.c:2234
do_epoll_pwait fs/eventpoll.c:2268 [inline]
__do_sys_epoll_pwait fs/eventpoll.c:2281 [inline]
__se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275
__x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff88810480c7d8 of 8 bytes by task 1799 on cpu 1:
list_empty_careful include/linux/list.h:329 [inline]
ep_events_available fs/eventpoll.c:381 [inline]
ep_poll fs/eventpoll.c:1797 [inline]
do_epoll_wait+0x279/0xf40 fs/eventpoll.c:2234
do_epoll_pwait fs/eventpoll.c:2268 [inline]
__do_sys_epoll_pwait fs/eventpoll.c:2281 [inline]
__se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275
__x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0xffff88810480c7d0 -> 0xffff888103c15098
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 1799 Comm: syz-fuzzer Tainted: G W 5.17.0-rc7-syzkaller-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Link: https://lkml.kernel.org/r/20220322002653.33865-3-kuniyu@amazon.co.jp
Fixes: e59d3c64cba6 ("epoll: eliminate unnecessary lock for zero timeout")
Fixes: c5a282e9635e ("fs/epoll: reduce the scope of wq lock in epoll_wait()")
Fixes: bf3b9f6372c4 ("epoll: Add busy poll support to epoll with socket fds.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reported-by: syzbot+bdd6e38a1ed5ee58d8bd@syzkaller.appspotmail.com
Cc: Al Viro <viro@zeniv.linux.org.uk>, Andrew Morton <akpm@linux-foundation.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Cc: Kuniyuki Iwashima <kuni1840@gmail.com>
Cc: "Soheil Hassas Yeganeh" <soheil@google.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Sridhar Samudrala" <sridhar.samudrala@intel.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fix data-races around epoll reported by KCSAN."
This series suppresses a false positive KCSAN's message and fixes a real
data-race.
This patch (of 2):
pipe_poll() runs locklessly and assigns 1 to poll_usage. Once poll_usage
is set to 1, it never changes in other places. However, concurrent writes
of a value trigger KCSAN, so let's make KCSAN happy.
BUG: KCSAN: data-race in pipe_poll / pipe_poll
write to 0xffff8880042f6678 of 4 bytes by task 174 on cpu 3:
pipe_poll (fs/pipe.c:656)
ep_item_poll.isra.0 (./include/linux/poll.h:88 fs/eventpoll.c:853)
do_epoll_wait (fs/eventpoll.c:1692 fs/eventpoll.c:1806 fs/eventpoll.c:2234)
__x64_sys_epoll_wait (fs/eventpoll.c:2246 fs/eventpoll.c:2241 fs/eventpoll.c:2241)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:113)
write to 0xffff8880042f6678 of 4 bytes by task 177 on cpu 1:
pipe_poll (fs/pipe.c:656)
ep_item_poll.isra.0 (./include/linux/poll.h:88 fs/eventpoll.c:853)
do_epoll_wait (fs/eventpoll.c:1692 fs/eventpoll.c:1806 fs/eventpoll.c:2234)
__x64_sys_epoll_wait (fs/eventpoll.c:2246 fs/eventpoll.c:2241 fs/eventpoll.c:2241)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:113)
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 177 Comm: epoll_race Not tainted 5.17.0-58927-gf443e374ae13 #6
Hardware name: Red Hat KVM, BIOS 1.11.0-2.amzn2 04/01/2014
Link: https://lkml.kernel.org/r/20220322002653.33865-1-kuniyu@amazon.co.jp
Link: https://lkml.kernel.org/r/20220322002653.33865-2-kuniyu@amazon.co.jp
Fixes: 3b844826b6c6 ("pipe: avoid unnecessary EPOLLET wakeups under normal loads")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kuniyuki Iwashima <kuni1840@gmail.com>
Cc: "Soheil Hassas Yeganeh" <soheil@google.com>
Cc: "Sridhar Samudrala" <sridhar.samudrala@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove the read_from_oldmem() wrapper introduced earlier and convert all
the remaining callers to pass an iov_iter.
Link: https://lkml.kernel.org/r/20220408090636.560886-4-bhe@redhat.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Convert vmcore to use an iov_iter", v5.
For some reason several people have been sending bad patches to fix
compiler warnings in vmcore recently. Here's how it should be done.
Compile-tested only on x86. As noted in the first patch, s390 should take
this conversion a bit further, but I'm not inclined to do that work
myself.
This patch (of 3):
Instead of passing in a 'buf' and 'userbuf' argument, pass in an iov_iter.
s390 needs more work to pass the iov_iter down further, or refactor, but
I'd be more comfortable if someone who can test on s390 did that work.
It's more convenient to convert the whole of read_from_oldmem() to take an
iov_iter at the same time, so rename it to read_from_oldmem_iter() and add
a temporary read_from_oldmem() wrapper that creates an iov_iter.
Link: https://lkml.kernel.org/r/20220408090636.560886-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20220408090636.560886-2-bhe@redhat.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
Per-Daniel Olsson
Paolo Abeni
Tonghao Zhang
Dave Airlie
Dustin L. Howett
Mark Bloch
Jakub Kicinski
Christoph Hellwig
Sean Christopherson
Sven Peter
Greg Kroah-Hartman
Bartosz Golaszewski
Michael Walle
Miaohe Lin
Andrey Konovalov
Linus Walleij
Mimi Zohar
Linus Torvalds
Alexandru Tachici
Tan Tee Min
Sebastian Andrzej Siewior
Thomas Gleixner
Jens Axboe
Horatiu Vultur
Pavel Begunkov
Tiezhu Yang
Kuniyuki Iwashima
Matthew Wilcox (Oracle)