aboutsummaryrefslogtreecommitdiffstats
path: root/include/net/bluetooth/hci_core.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-07-06Bluetooth: Store Resolv list sizeAnkit Navik1-0/+2
When the controller supports the Read LE Resolv List size feature, the maximum list size are read and now stored. Before patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 17.979791 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 17.980629 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 17.980786 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 17.981627 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #59 [hci0] 17.981786 > HCI Event: Command Complete (0x0e) plen 12 #60 [hci0] 17.982636 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 After patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 13.338168 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 13.338842 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 13.339029 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 13.339939 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0 #59 [hci0] 13.340152 > HCI Event: Command Complete (0x0e) plen 5 #60 [hci0] 13.340952 LE Read Resolving List Size (0x08|0x002a) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #61 [hci0] 13.341180 > HCI Event: Command Complete (0x0e) plen 12 #62 [hci0] 13.341898 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 Signed-off-by: Ankit Navik <ankit.p.navik@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-18Bluetooth: Add __hci_cmd_send functionLoic Poulain1-0/+2
This function allows to send a HCI command without expecting any controller event/response in return. This is allowed for vendor- specific commands only. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-04-03Bluetooth: Fix connection if directed advertising and privacy is usedSzymon Janc1-1/+1
Local random address needs to be updated before creating connection if RPA from LE Direct Advertising Report was resolved in host. Otherwise remote device might ignore connection request due to address mismatch. This was affecting following qualification test cases: GAP/CONN/SCEP/BV-03-C, GAP/CONN/GCEP/BV-05-C, GAP/CONN/DCEP/BV-05-C Before patch: < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #11350 [hci0] 84680.231216 Address: 56:BC:E8:24:11:68 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) > HCI Event: Command Complete (0x0e) plen 4 #11351 [hci0] 84680.246022 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #11352 [hci0] 84680.246417 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #11353 [hci0] 84680.248854 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11354 [hci0] 84680.249466 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #11355 [hci0] 84680.253222 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #11356 [hci0] 84680.458387 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:D6:76:8C:DF:82 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) RSSI: -74 dBm (0xb6) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11357 [hci0] 84680.458737 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #11358 [hci0] 84680.469982 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #11359 [hci0] 84680.470444 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #11360 [hci0] 84680.474971 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 #11361 [hci0] 84682.545385 > HCI Event: Command Complete (0x0e) plen 4 #11362 [hci0] 84682.551014 LE Create Connection Cancel (0x08|0x000e) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #11363 [hci0] 84682.551074 LE Connection Complete (0x01) Status: Unknown Connection Identifier (0x02) Handle: 0 Role: Master (0x00) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Connection interval: 0.00 msec (0x0000) Connection latency: 0 (0x0000) Supervision timeout: 0 msec (0x0000) Master clock accuracy: 0x00 After patch: < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #210 [hci0] 667.152459 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #211 [hci0] 667.153613 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #212 [hci0] 667.153704 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #213 [hci0] 667.154584 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #214 [hci0] 667.182619 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) RSSI: -70 dBm (0xba) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #215 [hci0] 667.182704 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #216 [hci0] 667.183599 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #217 [hci0] 667.183645 Address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) > HCI Event: Command Complete (0x0e) plen 4 #218 [hci0] 667.184590 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #219 [hci0] 667.184613 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #220 [hci0] 667.186558 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #221 [hci0] 667.485824 LE Connection Complete (0x01) Status: Success (0x00) Handle: 0 Role: Master (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x07 @ MGMT Event: Device Connected (0x000b) plen 13 {0x0002} [hci0] 667.485996 LE Address: 11:22:33:44:55:66 (OUI 11-22-33) Flags: 0x00000000 Data length: 0 Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2017-03-02sched/headers: Prepare to use <linux/rcuupdate.h> instead of <linux/rculist.h> in <linux/sched.h>Ingo Molnar1-0/+2
We don't actually need the full rculist.h header in sched.h anymore, we will be able to include the smaller rcupdate.h header instead. But first update code that relied on the implicit header inclusion. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-14locking/atomic, kref: Add kref_read()Peter Zijlstra1-2/+2
Since we need to change the implementation, stop exposing internals. Provide kref_read() to read the current reference count; typically used for debug messages. Kills two anti-patterns: atomic_read(&kref->refcount) kref->refcount.counter Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-22Bluetooth: Fix using the correct source address typeJohan Hedberg1-1/+1
The hci_get_route() API is used to look up local HCI devices, however so far it has been incapable of dealing with anything else than the public address of HCI devices. This completely breaks with LE-only HCI devices that do not come with a public address, but use a static random address instead. This patch exteds the hci_get_route() API with a src_type parameter that's used for comparing with the right address of each HCI device. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add support for appearance in scan rspMichał Narajowski1-0/+1
This patch enables prepending appearance value to scan response data. It also adds support for setting appearance value through mgmt command. If currently advertised instance has apperance flag set it is expired immediately. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add support for sending MGMT commands and events to monitorMarcel Holtmann1-0/+3
This adds support for tracing all management commands and events via the monitor interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Introduce helper to pack mgmt version informationMarcel Holtmann1-0/+1
The mgmt version information will be also needed for the control changell tracing feature. This provides a helper to pack them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: add printf format attribute to hci_set_[fh]w_info()Nicolas Iooss1-2/+2
Commit 5177a83827cd ("Bluetooth: Add debugfs fields for hardware and firmware info") introduced hci_set_hw_info() and hci_set_fw_info(). These functions use kvasprintf_const() but are not marked with a __printf attribute. Adding such an attribute helps detecting issues related to printf-formatting at build time. Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Put led_trigger field behind CONFIG_BT_LEDSMarcel Holtmann1-0/+2
The led_trigger field in hci_dev should be conditional based on if CONFIG_BT_LEDS is set or not. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-18Bluetooth: Add debugfs fields for hardware and firmware infoMarcel Holtmann1-0/+4
Some Bluetooth controllers allow for reading hardware and firmware related vendor specific infos. If they are available, then they can be exposed via debugfs now. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-18Bluetooth: Move hci_recv_frame and hci_recv_diag prototypesMarcel Holtmann1-3/+2
The protoypes for hci_recv_frame and hci_recv_diag are in the wrong location in the header file. Move them close to all the other hci_dev related exported functions. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-13Bluetooth: Add Authentication Failed reason to Disconnected Mgmt eventSzymon Janc1-0/+1
If link is disconnected due to Authentication Failure (PIN or Key Missing status) userspace will be notified about this with proper error code. Many LE profiles define "PIN or Key Missing" status as indication of remote lost bond so this allows userspace to take action on this. @ Device Connected: 88:63:DF:88:0E:83 (1) flags 0x0000 02 01 1a 05 03 0a 18 0d 18 0b 09 48 65 61 72 74 ...........Heart 20 52 61 74 65 Rate > HCI Event: Command Status (0x0f) plen 4 LE Read Remote Used Features (0x08|0x0016) ncmd 1 Status: Success (0x00) > ACL Data RX: Handle 3585 flags 0x02 dlen 11 ATT: Read By Group Type Request (0x10) len 6 Handle range: 0x0001-0xffff Attribute group type: Primary Service (0x2800) > HCI Event: LE Meta Event (0x3e) plen 12 LE Read Remote Used Features (0x04) Status: Success (0x00) Handle: 3585 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 LE Encryption < HCI Command: LE Start Encryption (0x08|0x0019) plen 28 Handle: 3585 Random number: 0x0000000000000000 Encrypted diversifier: 0x0000 Long term key: 26201cd479a0921b6f949f0b1fa8dc82 > HCI Event: Command Status (0x0f) plen 4 LE Start Encryption (0x08|0x0019) ncmd 1 Status: Success (0x00) > HCI Event: Encryption Change (0x08) plen 4 Status: PIN or Key Missing (0x06) Handle: 3585 Encryption: Disabled (0x00) < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 3585 Reason: Authentication Failure (0x05) > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) ncmd 1 Status: Success (0x00) > HCI Event: Disconnect Complete (0x05) plen 4 Status: Success (0x00) Handle: 3585 Reason: Connection Terminated By Local Host (0x16) @ Device Disconnected: 88:63:DF:88:0E:83 (1) reason 4 @ Device Connected: C4:43:8F:A3:4D:83 (0) flags 0x0000 08 09 4e 65 78 75 73 20 35 ..Nexus 5 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) ncmd 1 Status: Success (0x00) > HCI Event: Link Key Request (0x17) plen 6 Address: C4:43:8F:A3:4D:83 (LG Electronics) < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 Address: C4:43:8F:A3:4D:83 (LG Electronics) Link key: 080812e4aa97a863d11826f71f65a933 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Reply (0x01|0x000b) ncmd 1 Status: Success (0x00) Address: C4:43:8F:A3:4D:83 (LG Electronics) > HCI Event: Auth Complete (0x06) plen 3 Status: PIN or Key Missing (0x06) Handle: 75 @ Authentication Failed: C4:43:8F:A3:4D:83 (0) status 0x05 < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 75 Reason: Remote User Terminated Connection (0x13) > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) ncmd 1 Status: Success (0x00) > HCI Event: Disconnect Complete (0x05) plen 4 Status: Success (0x00) Handle: 75 Reason: Connection Terminated By Local Host (0x16) @ Device Disconnected: C4:43:8F:A3:4D:83 (0) reason 4 Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-02-23Bluetooth: add LED trigger for indicating HCI is powered upHeiner Kallweit1-0/+3
Add support for LED triggers to the Bluetooth subsystem and add kernel config symbol BT_LEDS for it. For now one trigger for indicating "HCI is powered up" is supported. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-05Bluetooth: Add support for Start Limited Discovery commandJohan Hedberg1-0/+1
This patch implements the mgmt Start Limited Discovery command. Most of existing Start Discovery code is reused since the only difference is the presence of a 'limited' flag as part of the discovery state. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-05Bluetooth: Change eir_has_data_type() to more generic eir_get_data()Johan Hedberg1-10/+20
To make the EIR parsing helper more general purpose, make it return the found data and its length rather than just saying whether the data was present or not. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Perform HCI update for power on synchronouslyJohan Hedberg1-1/+2
The request to update HCI during power on is always coming either from hdev->req_workqueue or through an ioctl, so it's safe to use hci_req_sync for it. This way we also eliminate potential races with incoming mgmt commands or other actions while powering on. Part of this refactoring is the splitting of mgmt_powered() into mgmt_power_on() and __mgmt_power_off() functions. The main reason is the different requirements as far as hdev locking is concerned, as highlighted with the __ prefix of the power off API. Since the power on in the case of clearing the AUTO_OFF flag cannot be done synchronously in the set_powered mgmt handler, the hci_power_on work callback is extended to cover this (which also simplifies the set_powered helper a lot). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move discoverable timeout behind hdev->req_workqueueJohan Hedberg1-1/+0
Since the other discoverable changes are behind req_workqueue now it only makes sense to move the discoverable timeout there as well. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move discoverable changes to hdev->req_workqueueJohan Hedberg1-0/+2
The discoverable mode is intrinsically linked with the connectable mode e.g. through sharing the same HCI command (Write Scan Enable) for BR/EDR. It makes therefore sense to move it to hci_request.c and run the changes through the same hdev->req_workqueue. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move connectable changes to hdev->req_workqueueJohan Hedberg1-0/+2
This way the connectable changes are synchronized against each other, which helps avoid potential races. The connectable mode is also linked together with LE advertising which makes is more convenient to have it behind the same workqueue. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move advertising instance management to hci_request.cJohan Hedberg1-3/+6
This paves the way for eventually performing advertising changes through the hdev->req_workqueue. Some new APIs need to be exposed from mgmt.c to hci_request.c and vice-versa, but many of them will go away once hdev->req_workqueue gets used. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Run page scan updates through hdev->req_workqueueJohan Hedberg1-0/+1
Since Add/Remove Device perform the page scan updates independently from the HCI command completion we've introduced a potential race when multiple mgmt commands are queued. Doing the page scan updates through the req_workqueue ensures that the state changes are performed in a race-free manner. At the same time, to make the request helper more widely usable, extend it to also cover Inquiry Scan changes since those are behind the same HCI command. This is also reflected in the new name of the API as well as the work struct name. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Fix specifying role for LE connectionsJohan Hedberg1-1/+1
The hci_connect_le_scan() is (as the name implies) a master/central role API, so it makes no sense in passing a role parameter to it. At the same time this patch also fixes the direct advertising support for LE L2CAP sockets where we now call the more appropriate hci_le_connect() API if slave/peripheral role is desired. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Move Stop Discovery to req_workqueueJohan Hedberg1-0/+1
Since discovery also deals with LE scanning it makes sense to move it behind the same req_workqueue as other LE scanning changes. This also simplifies the logic since we do many of the actions in a synchronous manner. Part of this refactoring is moving hci_req_stop_discovery() to hci_request.c. At the same time the function receives support for properly handling the STOPPING state since that's the state we'll be in when stopping through the req_workqueue. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Move Start Discovery to req_workqueueJohan Hedberg1-0/+2
Since discovery also deals with LE scanning it makes sense to move it behind the same req_workqueue as other LE scanning changes. This also simplifies the logic since we do many of the actions in a synchronous manner. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Move LE scan disable/restart behind req_workqueueJohan Hedberg1-3/+2
To avoid any risks of races, place also these LE scan modification work callbacks behind the same work queue as the other LE scan changes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Run all background scan updates through req_workqueueJohan Hedberg1-0/+2
Instead of firing off a simple async request queue all background scan updates through req_workqueue and use hci_req_sync() there to ensure that no two updates overlap with each other. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Remove unnecessary call to hci_update_background_scanJohan Hedberg1-1/+0
The hci_conn_params_clear_all() function is only called from hci_unregister_dev() at which point it's completely futile to try to do any LE scanning updates. Simply remove this unnecessary function call. At the same time we can make the function static since it's only accessed from within the same c-file. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-21Bluetooth: Remove unnecessary hci_explicit_connect_lookup functionJohan Hedberg1-3/+0
There's only one user of this helper which can be replaces with a call to hci_pend_le_action_lookup() and a check for params->explicit_connect. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-21Bluetooth: Add hci_conn_hash_lookup_le() helper functionJohan Hedberg1-0/+24
Many of the existing LE connection lookups are forced to use hci_conn_hash_lookup_ba() which doesn't take into account the address type. What's worse, most of the users don't bother checking that the returned address type matches what was wanted. This patch adds a new helper API to look up LE connections based on their address and address type, paving the way to have the hci_conn_hash_lookup_ba() users converted to do more precise lookups. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-21Bluetooth: Fix missing hdev locking for LE scan cleanupJohan Hedberg1-0/+1
The hci_conn objects don't have a dedicated lock themselves but rely on the caller to hold the hci_dev lock for most types of access. The hci_conn_timeout() function has so far sent certain HCI commands based on the hci_conn state which has been possible without holding the hci_dev lock. The recent changes to do LE scanning before connect attempts added even more operations to hci_conn and hci_dev from hci_conn_timeout, thereby exposing potential race conditions with the hci_dev and hci_conn states. As an example of such a race, here there's a timeout but an l2cap_sock_connect() call manages to race with the cleanup routine: [Oct21 08:14] l2cap_chan_timeout: chan ee4b12c0 state BT_CONNECT [ +0.000004] l2cap_chan_close: chan ee4b12c0 state BT_CONNECT [ +0.000002] l2cap_chan_del: chan ee4b12c0, conn f3141580, err 111, state BT_CONNECT [ +0.000002] l2cap_sock_teardown_cb: chan ee4b12c0 state BT_CONNECT [ +0.000005] l2cap_chan_put: chan ee4b12c0 orig refcnt 4 [ +0.000010] hci_conn_drop: hcon f53d56e0 orig refcnt 1 [ +0.000013] l2cap_chan_put: chan ee4b12c0 orig refcnt 3 [ +0.000063] hci_conn_timeout: hcon f53d56e0 state BT_CONNECT [ +0.000049] hci_conn_params_del: addr ee:0d:30:09:53:1f (type 1) [ +0.000002] hci_chan_list_flush: hcon f53d56e0 [ +0.000001] hci_chan_del: hci0 hcon f53d56e0 chan f4e7ccc0 [ +0.004528] l2cap_sock_create: sock e708fc00 [ +0.000023] l2cap_chan_create: chan ee4b1770 [ +0.000001] l2cap_chan_hold: chan ee4b1770 orig refcnt 1 [ +0.000002] l2cap_sock_init: sk ee4b3390 [ +0.000029] l2cap_sock_bind: sk ee4b3390 [ +0.000010] l2cap_sock_setsockopt: sk ee4b3390 [ +0.000037] l2cap_sock_connect: sk ee4b3390 [ +0.000002] l2cap_chan_connect: 00:02:72:d9:e5:8b -> ee:0d:30:09:53:1f (type 2) psm 0x00 [ +0.000002] hci_get_route: 00:02:72:d9:e5:8b -> ee:0d:30:09:53:1f [ +0.000001] hci_dev_hold: hci0 orig refcnt 8 [ +0.000003] hci_conn_hold: hcon f53d56e0 orig refcnt 0 Above the l2cap_chan_connect() shouldn't have been able to reach the hci_conn f53d56e0 anymore but since hci_conn_timeout didn't do proper locking that's not the case. The end result is a reference to hci_conn that's not in the conn_hash list, resulting in list corruption when trying to remove it later: [Oct21 08:15] l2cap_chan_timeout: chan ee4b1770 state BT_CONNECT [ +0.000004] l2cap_chan_close: chan ee4b1770 state BT_CONNECT [ +0.000003] l2cap_chan_del: chan ee4b1770, conn f3141580, err 111, state BT_CONNECT [ +0.000001] l2cap_sock_teardown_cb: chan ee4b1770 state BT_CONNECT [ +0.000005] l2cap_chan_put: chan ee4b1770 orig refcnt 4 [ +0.000002] hci_conn_drop: hcon f53d56e0 orig refcnt 1 [ +0.000015] l2cap_chan_put: chan ee4b1770 orig refcnt 3 [ +0.000038] hci_conn_timeout: hcon f53d56e0 state BT_CONNECT [ +0.000003] hci_chan_list_flush: hcon f53d56e0 [ +0.000002] hci_conn_hash_del: hci0 hcon f53d56e0 [ +0.000001] ------------[ cut here ]------------ [ +0.000461] WARNING: CPU: 0 PID: 1782 at lib/list_debug.c:56 __list_del_entry+0x3f/0x71() [ +0.000839] list_del corruption, f53d56e0->prev is LIST_POISON2 (00000200) The necessary fix is unfortunately more complicated than just adding hci_dev_lock/unlock calls to the hci_conn_timeout() call path. Particularly, the hci_conn_del() API, which expects the hci_dev lock to be held, performs a cancel_delayed_work_sync(&hcon->disc_work) which would lead to a deadlock if the hci_conn_timeout() call path tries to acquire the same lock. This patch solves the problem by deferring the cleanup work to a separate work callback. To protect against the hci_dev or hci_conn going away meanwhile temporary references are taken with the help of hci_dev_hold() and hci_conn_get(). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 4.3
2015-10-21Bluetooth: Introduce driver specific post init callbackMarcel Holtmann1-0/+1
Some drivers might have to restore certain settings after the init procedure has been completed. This driver callback allows them to hook into that stage. This callback is run just before the controller is declared as powered up. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21Bluetooth: Don't use remote address type to decide IRK persistencyJohan Hedberg1-1/+1
There are LE devices on the market that start off by announcing their public address and then once paired switch to using private address. To be interoperable with such devices we should simply trust the fact that we're receiving an IRK from them to indicate that they may use private addresses in the future. Instead, simply tie the persistency to the bonding/no-bonding information the same way as for LTKs and CSRKs. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-08Bluetooth: Add debugfs entry for setting vendor diagnostic modeMarcel Holtmann1-0/+1
This adds a new debugfs entry for enabling and disabling the vendor diagnostic mode. It is only exposed for drivers that provide the set_diag driver callback and actually have an option for vendor specific diagnostic information. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-08Bluetooth: Add support for vendor specific diagnostic channelMarcel Holtmann1-0/+1
Introduce hci_recv_diag function for HCI drivers to allow sending vendor specific diagnostic messages into the Bluetooth core stack. The messages are not processed, but they are forwarded to the monitor channel and can be retrieved by user space diagnostic tools. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-09-29Bluetooth: Add hci_cmd_sync functionLoic Poulain1-0/+3
Send a HCI command and wait for command complete event. This function serializes the requests by grabbing the req_lock. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17Bluetooth: close HCI device when user channel socket gets closedSimon Fels1-0/+1
With 9380f9eacfbbee701daa416edd6625efcd3e29e1 the order of unsetting the HCI_USER_CHANNEL flag of the HCI device was reverted to ensure the device is first closed before making it available again. Due to hci_dev_close checking for HCI_USER_CHANNEL being set on the device it was never really closed and was kept opened. We're now calling hci_dev_do_close directly to make sure the device is correctly closed and we keep the correct order to unset the flag on our device object. Signed-off-by: Simon Fels <simon.fels@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-10Bluetooth: add hci_connect_le_scanJakub Pawlowski1-0/+6
Currently, when trying to connect to already paired device that just rotated its RPA MAC address, old address would be used and connection would fail. In order to fix that, kernel must scan and receive advertisement with fresh RPA before connecting. This patch adds hci_connect_le_scan with dependencies, new method that will be used to connect to remote LE devices. Instead of just sending connect request, it adds a device to whitelist. Later patches will make use of this whitelist to send conenct request when advertisement is received, and properly handle timeouts. Signed-off-by: Jakub Pawlowski <jpawlowski@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-10Bluetooth: add hci_lookup_le_connectJakub Pawlowski1-0/+20
This patch adds hci_lookup_le_connect method, that will be used to check wether outgoing le connection attempt is in progress. Signed-off-by: Jakub Pawlowski <jpawlowski@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-10Bluetooth: preparation for new connect procedureJakub Pawlowski1-0/+3
Currently, when trying to connect to already paired device that just rotated its RPA MAC address, old address would be used and connection would fail. In order to fix that, kernel must scan and receive advertisement with fresh RPA before connecting. This patch adds some fields to hci_conn_params, in preparation to new connect procedure. explicit_connect will be used to override any current auto_connect action, and connect to device when ad is received. HCI_AUTO_CONN_EXPLICIT was added to auto_connect enum. When this value will be used, explicit connect is the only action, and params can be removed after successful connection. HCI_CONN_SCANNING is added to hci_conn flags. When it's set, connect is scan phase. It gets cleared when advertisement is received, and HCI_OP_LE_CREATE_CONN is sent. Signed-off-by: Jakub Pawlowski <jpawlowski@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-23Bluetooth: hci_check_conn_params() check proper rangeSeungyoun Ju1-1/+1
Slave latency range has been changed in Core Spec. 4.2 by Erratum 5419 of ESR08_V1.0.0. And it should be applied to Core Spec. 4.0 and 4.1. Before: connSlaveLatency <= ((connSupervisionTimeout / connIntervalMax) - 1) After: connSlaveLatency <= ((connSupervisionTimeout / (connIntervalMax*2)) - 1) This patch makes hci_check_conn_params() check the allowable slave latency range using the changed way. Signed-off-by: Seungyoun Ju <sy39.ju@samsung.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-06-18Bluetooth: hci_core: increase max adv instFlorian Grandel1-1/+1
Now that all preconditions are present for actual multi-advertising, the number of allowed advertising instances can be larger than one. This patch increases the number of allowed advertising instances to 5. Signed-off-by: Florian Grandel <fgrandel@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-18Bluetooth: hci_core: remove obsolete adv_instanceFlorian Grandel1-6/+0
Now that the obsolete adv_instance is no longer being referenced anywhere in the code it can be removed without breaking the build. Signed-off-by: Florian Grandel <fgrandel@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-18Bluetooth: mgmt/hci_core: multi-adv for add_advertising*()Florian Grandel1-0/+1
The add_advertising() and add_advertising_complete() functions reference the now obsolete hdev->adv_instance struct. Both methods are being refactored to access the dynamic advertising instance list instead. This patch also introduces all logic necessary to actually deal with multiple instance advertising. Notably the mgmt_adv_inst_expired() and schedule_adv_inst() method are being referenced to schedule instances in a round robin fashion. This patch also introduces a "pending" flag into the adv_info struct. This is necessary to identify and remove recently added advertising instances when the HCI commands return with an error status code. Otherwise new advertising instances could be leaked without properly informing userspace about their existence. Signed-off-by: Florian Grandel <fgrandel@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-18Bluetooth: hci_core/mgmt: move adv timeout to hdevFlorian Grandel1-1/+4
Currently the delayed work managing advertising duration and timeout is part of the advertising instance structure. This is not correct as only a single instance can be advertised at any given time. To implement round robin advertising a single delayed work structure is needed. To fix this the delayed work structure is being moved to the hci_dev structure. The instance specific variable is renamed to "remaining_time" to make it clear that this is the remaining lifetime of the instance and not the current advertising timeout. Signed-off-by: Florian Grandel <fgrandel@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-18Bluetooth: hci_core/mgmt: Introduce multi-adv listFlorian Grandel1-0/+17
The current hci dev structure only supports a single advertising instance. To support multi-instance advertising it is necessary to introduce a linked list of advertising instances so that multiple advertising instances can be dynamically added and/or removed. In a first step, the existing adv_instance member of the hci_dev struct is supplemented by a linked list of advertising instances. This patch introduces the list and supporting list management infrastructure. The list is not being used yet. Signed-off-by: Florian Grandel <fgrandel@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09Bluetooth: Move SCO support under BT_BREDR config optionArron Wang1-0/+12
SCO/eSCO link is supported by BR/EDR controller, it is suitable to move them under BT_BREDR config option Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09Bluetooth: Make l2cap_recv_acldata() and sco_recv_scodata() return voidArron Wang1-2/+2
The return value of l2cap_recv_acldata() and sco_recv_scodata() are not used, then change it to return void Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09Bluetooth: Fix encryption key size handling for LTKsJohan Hedberg1-1/+1
The encryption key size for LTKs is supposed to be applied only at the moment of encryption. When generating a Link Key (using LE SC) from the LTK the full non-shortened value should be used. This patch modifies the code to always keep the full value around and only apply the key size when passing the value to HCI. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.