aboutsummaryrefslogtreecommitdiffstats
path: root/include/net/dsa.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-08-01net: dsa: remove PHY device argument from .set_eeeVivien Didelot1-1/+0
The DSA switch operations for EEE are only meant to configure a port's MAC EEE settings. The port's PHY EEE settings are accessed by the DSA layer and must be made available via a proper PHY driver. In order to reduce this confusion, remove the phy_device argument from the .set_eee operation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19net: dsa: unexport dsa_is_port_initializedVivien Didelot1-5/+0
The dsa_is_port_initialized helper is only used by dsa_switch_resume and dsa_switch_suspend, if CONFIG_PM_SLEEP is enabled. Make it static to dsa.c. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: dsa: Associate slave network device with CPU portFlorian Fainelli1-0/+1
In preparation for supporting multiple CPU ports with DSA, have the dsa_port structure know which CPU it is associated with. This will be important in order to make sure the correct CPU is used for transmission of the frames. If not for functional reasons, for performance (e.g: load balancing) and forwarding decisions. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: dsa: Relocate master ethtool operationsFlorian Fainelli1-12/+5
Relocate master_ethtool_ops and master_orig_ethtool_ops into struct dsa_port in order to be both consistent, and make things self contained within the dsa_port structure. This is a preliminary change to supporting multiple CPU port interfaces. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: dsa: Remove master_netdev and use dst->cpu_dp->netdevFlorian Fainelli1-5/+0
In preparation for supporting multiple CPU ports, remove dst->master_netdev and ds->master_netdev and replace them with only one instance of the common object we have for a port: struct dsa_port::netdev. ds->master_netdev is currently write only and would be helpful in the case where we have two switches, both with CPU ports, and also connected within each other, which the multi-CPU port patch series would address. While at it, introduce a helper function used in net/dsa/slave.c to immediately get a reference on the master network device called dsa_master_netdev(). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04net: dsa: Initialize all CPU and enabled ports masks in dsa_ds_parse()Florian Fainelli1-1/+1
There was no reason for duplicating the code that initializes ds->enabled_port_mask in both dsa_parse_ports_dn() and dsa_parse_ports(), instead move this to dsa_ds_parse() which is early enough before ops->setup() has run. While at it, we can now make dsa_is_cpu_port() check ds->cpu_port_mask which is a step towards being multi-CPU port capable. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01net: dsa: remove dsa_uses_tagged_protocolVivien Didelot1-7/+1
Since dev->dsa_ptr is a pointer to a dsa_switch_tree, there is no need to have another inline helper just to check rcv. Remove dsa_uses_tagged_protocol and check dsa_ptr && dsa_ptr->rcv together at the same time. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01net: dsa: comment hot path requirementsVivien Didelot1-0/+3
The DSA layer uses inline helpers and copy of the tagging functions for faster access in hot path. Add comments to detail that. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31dsa: add support for Microchip KSZ tail taggingWoojung Huh1-0/+1
Adding support for the Microchip KSZ switch family tail tagging. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31net: dsa: remove dev arg of dsa_register_switchVivien Didelot1-1/+1
The current dsa_register_switch function takes a useless struct device pointer argument, which always equals ds->dev. Drivers either call it with ds->dev, or with the same device pointer passed to dsa_switch_alloc, which ends up being assigned to ds->dev. This patch removes the second argument of the dsa_register_switch and _dsa_register_switch functions. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: dsa: move notifier info to private headerVivien Didelot1-10/+0
The DSA notifier events and info structure definitions are not meant for DSA drivers and users, but only used internally by the DSA core files. Move them from the public net/dsa.h file to the private dsa_priv.h file. Also use this opportunity to turn the events into an anonymous enum, because we don't care about the values, and this will prevent future conflicts when adding (and sorting) new events. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net: dsa: use switchdev_obj_dump_cb_t everywhereVivien Didelot1-3/+3
Now that the DSA public header includes switchdev.h, use the provided switchdev_obj_dump_cb_t typedef for the object dump callback. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net: dsa: include switchdev.h only onceVivien Didelot1-6/+1
DSA drivers and core use switchdev. Include switchdev.h only once, in the dsa.h public header, so that inclusion in DSA drivers or forward declarations of switchdev structures in not necessary anymore. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: dsa: Sort DSA tagging protocol driversAndrew Lunn1-4/+4
With more tag protocols being added, regain some order by sorting the entries in various places. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: dsa: store CPU port pointer in the treeVivien Didelot1-7/+6
A dsa_switch_tree instance holds a dsa_switch pointer and a port index to identify the switch port to which the CPU is attached. Now that the DSA layer has a dsa_port structure to hold this data, use it to point the switch CPU port. This patch simply substitutes s/dst->cpu_switch/dst->cpu_dp->ds/ and s/dst->cpu_port/dst->cpu_dp->index/. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20net: dsa: add support for the SMSC-LAN9303 tagging formatJuergen Beisert1-0/+1
To define the outgoing port and to discover the incoming port a regular VLAN tag is used by the LAN9303. But its VID meaning is 'special'. This tag handler/filter depends on some hardware features which must be enabled in the device to provide and make use of this special VLAN tag to control the destination and the source of an ethernet packet. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: dsa: isolate legacy codeVivien Didelot1-1/+3
This patch moves as is the legacy DSA code from dsa.c to legacy.c, except the few shared symbols which remain in dsa.c. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-08net: dsa: Factor bottom tag receive functionsFlorian Fainelli1-1/+1
All DSA tag receive functions do strictly the same thing after they have located the originating source port from their tag specific protocol: - push ETH_HLEN bytes - set pkt_type to PACKET_HOST - call eth_type_trans() - bump up counters - call netif_receive_skb() Factor all of that into dsa_switch_rcv(). This also makes us return a pointer to a sk_buff, which makes us symetric with the xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-07net-next: dsa: add Mediatek tag RX/TX handlerSean Wang1-0/+1
Add the support for the 4-bytes tag for DSA port distinguishing inserted allowing receiving and transmitting the packet via the particular port. The tag is being added after the source MAC address in the ethernet header. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Landen Chao <Landen.Chao@mediatek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-01net: dsa: add cross-chip bridging operationsVivien Didelot1-0/+8
Introduce crosschip_bridge_{join,leave} operations in the dsa_switch_ops structure, which can be used by switches supporting interconnection. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28net: dsa: dsa2: Add basic support of devlinkAndrew Lunn1-0/+5
Register the switch and its ports with devlink. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28net: break include loop netdevice.h, dsa.h, devlink.hAndrew Lunn1-0/+9
There is an include loop between netdevice.h, dsa.h, devlink.h because of NETDEV_ALIGN, making it impossible to use devlink structures in dsa.h. Break this loop by taking dsa.h out of netdevice.h, add a forward declaration of dsa_switch_tree and netdev_set_default_ethtool_ops() function, which is what netdevice.h requires. No longer having dsa.h in netdevice.h means the includes in dsa.h no longer get included. This breaks a few other files which depend on these includes. Add these directly in the affected file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: dsa: check out-of-range ageing time valueVivien Didelot1-0/+4
If a DSA switch driver cannot program an ageing time value due to it being out-of-range, switchdev will raise a stack trace before failing. To fix this, add ageing_time_min and ageing_time_max members to the dsa_switch in order for the switch drivers to optionally specify their supported ageing time limits. The DSA core will now check for provided ageing time limits and return -ERANGE from the switchdev prepare phase if the value is out-of-range. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: dsa: add dsa_is_normal_port helperVivien Didelot1-0/+5
Introduce a dsa_is_normal_port helper to check if a given port is a normal user port as opposed to a CPU port or DSA link. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10net: dsa: remove unnecessary phy*.h includesRussell King1-2/+3
Including phy.h and phy_fixed.h into net/dsa.h causes phy*.h to be an unnecessary dependency for quite a large amount of the kernel. There's very little which actually requires definitions from phy.h in net/dsa.h - the include itself only wants the declaration of a couple of structures and IFNAMSIZ. Add linux/if.h for IFNAMSIZ, declarations for the structures, phy.h to mv88e6xxx.h as it needs it for phy_interface_t, and remove both phy.h and phy_fixed.h from net/dsa.h. This patch reduces from around 800 files rebuilt to around 40 - even with ccache, the time difference is noticable. Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07net: dsa: Add support for platform dataFlorian Fainelli1-0/+6
Allow drivers to use the new DSA API with platform data. Most of the code in net/dsa/dsa2.c does not rely so much on device_nodes and can get the same information from platform_data instead. We purposely do not support distributed configurations with platform data, so drivers should be providing a pointer to a 'struct dsa_chip_data' structure if they wish to communicate per-port layout. Multiple CPUs port could potentially be supported and dsa_chip_data is extended to receive up to one reference to an upstream network device per port described by a dsa_chip_data structure. dsa_dev_to_net_device() increments the network device's reference count, so we intentionally call dev_put() to be consistent with the DT-enabled path, until we have a generic notifier based solution. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07net: dsa: Rename and export dev_to_net_device()Florian Fainelli1-0/+1
In preparation for using this function in net/dsa/dsa2.c, rename the function to make its scope DSA specific, and export it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06net: dsa: introduce bridge notifierVivien Didelot1-0/+10
A slave device will now notify the switch fabric once its port is bridged or unbridged, instead of calling directly its switch operations. This code allows propagating cross-chip bridging events in the fabric. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06net: dsa: add switch notifierVivien Didelot1-0/+7
Add a notifier block per DSA switch, registered against a notifier head in the switch fabric they belong to. This infrastructure will allow to propagate fabric-wide events such as port bridging, VLAN configuration, etc. If a DSA switch driver cares about cross-chip configuration, such events can be caught. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: Add plumbing for port mirroringFlorian Fainelli1-0/+33
Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: Hook {get,set}_rxnfc ethtool operationsFlorian Fainelli1-0/+8
In preparation for adding support for CFP/TCAMP in the bcm_sf2 driver add the plumbing to call into driver specific {get,set}_rxnfc operations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: pass bridge device when a port leavesVivien Didelot1-1/+2
Upon reception of the NETDEV_CHANGEUPPER, a leaving port is already unbridged, so reflect this by assigning the port's bridge_dev pointer to NULL before calling the port_bridge_leave DSA driver operation. Now that the bridge_dev pointer is exposed to the drivers, reflecting the current state of the DSA switch fabric is necessary for the drivers to adjust their port based VLANs correctly. Pass the bridge device pointer to the port_bridge_leave operation so that drivers have all information to re-program their chips properly, and do not need to cache it anymore. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: move bridge device in dsa_portVivien Didelot1-0/+1
Move the bridge_dev pointer from dsa_slave_priv to dsa_port so that DSA drivers can access this information and remove the need to cache it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: add ds and index to dsa_portVivien Didelot1-0/+2
Add the physical switch instance and port index a DSA port belongs to to the dsa_port structure. That can be used later to retrieve information about a physical port when configuring a switch fabric, or lighten up struct dsa_slave_priv. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: variable number of portsVivien Didelot1-1/+5
Change the ports[DSA_MAX_PORTS] array of the dsa_switch structure for a zero-length array, allocated at the same time as the dsa_switch structure itself. A dsa_switch_alloc() helper is provided for that. This commit brings no functional change yet since we pass DSA_MAX_PORTS as the number of ports for the moment. Future patches can update the DSA drivers separately to support dynamic number of ports. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-26net: dsa: Pass device pointer to dsa_register_switchFlorian Fainelli1-1/+1
In preparation for allowing dsa_register_switch() to be supplied with device/platform data, pass down a struct device pointer instead of a struct device_node. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net: dsa: Mop up remaining NET_DSA_HWMON referencesAndrew Lunn1-8/+0
Previous patches have moved the temperature sensor code into the Marvell PHYs. A few now dead references to NET_DSA_HWMON were left behind. Go reap them. Reported-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-20net: dsa: Remove hwmon supportAndrew Lunn1-8/+0
Only the Marvell mv88e6xxx DSA driver made use of the HWMON support in DSA. The temperature sensor registers are actually in the embedded PHYs, and the PHY driver now supports it. So remove all HWMON support from DSA and drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18net: dsa: store CPU switch structure in the treeVivien Didelot1-4/+4
Store a dsa_switch pointer to the CPU switch in the tree instead of only its index. This avoids the need to initialize it to -1. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: dsa: Make dsa_switch_ops constFlorian Fainelli1-2/+2
Now that we have properly encapsulated and made drivers utilize exported functions, we can switch dsa_switch_ops to be a annotated with const. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: dsa: Encapsulate legacy switch drivers into dsa_switch_driverFlorian Fainelli1-4/+7
In preparation for making struct dsa_switch_ops const, encapsulate it within a dsa_switch_driver which has a list pointer and a pointer to dsa_switch_ops. This allows us to take the list_head pointer out of dsa_switch_ops, which is written to by {un,}register_switch_driver. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net: dsa: add port fast ageingVivien Didelot1-0/+2
Today the DSA drivers are in charge of flushing the MAC addresses associated to a port when its STP state changes from Learning or Forwarding, to Disabled or Blocking or Listening. This makes the drivers more complex and hides the generic switch logic. Introduce a new optional port_fast_age operation to dsa_switch_ops, to move this logic to the DSA layer and keep drivers simple. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16net-next: dsa: add Qualcomm tag RX/TX handlerJohn Crispin1-0/+1
Add support for the 2-bytes Qualcomm tag that gigabit switches such as the QCA8337/N might insert when receiving packets, or that we need to insert while targeting specific switch ports. The tag is inserted directly behind the ethernet header. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01net: dsa: remove ds_to_privVivien Didelot1-5/+0
Access the priv member of the dsa_switch structure directly, instead of having an unnecessary helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: dsa: add MDB supportVivien Didelot1-0/+16
Add SWITCHDEV_OBJ_ID_PORT_MDB support to the DSA layer. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-24net: dsa: rename switch operations structureVivien Didelot1-5/+5
Now that the dsa_switch_driver structure contains only function pointers as it is supposed to, rename it to the more appropriate dsa_switch_ops, uniformly to any other operations structure in the kernel. No functional changes here, basically just the result of something like: s/dsa_switch_driver *drv/dsa_switch_ops *ops/g However keep the {un,}register_switch_driver functions and their dsa_switch_drivers list as is, since they represent the -- likely to be deprecated soon -- legacy DSA registration framework. In the meantime, also fix the following checks from checkpatch.pl to make it happy with this patch: CHECK: Comparison to NULL could be written "!ops" #403: FILE: net/dsa/dsa.c:470: + if (ops == NULL) { CHECK: Comparison to NULL could be written "ds->ops->get_strings" #773: FILE: net/dsa/slave.c:697: + if (ds->ops->get_strings != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_ethtool_stats" #824: FILE: net/dsa/slave.c:785: + if (ds->ops->get_ethtool_stats != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_sset_count" #835: FILE: net/dsa/slave.c:798: + if (ds->ops->get_sset_count != NULL) total: 0 errors, 0 warnings, 4 checks, 784 lines checked Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-22net: dsa: Allow the DSA driver to indicate the tag protocolAndrew Lunn1-2/+3
DSA drivers may drive different families of switches which need different tag protocol. Rather than hard code the tag protocol in the driver structure, have a callback for the DSA core to call. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19net: dsa: Export suspend/resume functionsFlorian Fainelli1-0/+14
In preparation for allowing switch drivers to implement system-wide suspend/resume functions, export dsa_switch_suspend and dsa_switch_resume() such that these are callable from the appropriate driver specific suspend/resume functions. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19net: dsa: support switchdev ageing time attrVivien Didelot1-0/+2
Add a new function for DSA drivers to handle the switchdev SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME attribute. The ageing time is passed as milliseconds. Also because we can have multiple logical bridges on top of a physical switch and ageing time are switch-wide, call the driver function with the fastest ageing time in use on the chip instead of the requested one. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-08net: dsa: initialize the routing tableVivien Didelot1-0/+2
The routing table of every switch in a tree is currently initialized to all zeros. This is an issue since 0 is a valid port number. Add a DSA_RTABLE_NONE=-1 constant to initialize the signed values of the routing table pointing to other switches. This fixes the device mapping of the mv88e6xxx driver where the port pointing to the switch itself and to non-existent switches was wrongly configured to be 0. It is now set to the expected 0xf value. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.