aboutsummaryrefslogtreecommitdiffstats
path: root/include/net/ip_vs.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-10-21ipvs: provide address family for debuggingJulian Anastasov1-8/+9
As skb->protocol is not valid in LOCAL_OUT add parameter for address family in packet debugging functions. Even if ports are not present in AH and ESP change them to use ip_vs_tcpudp_debug_packet to show at least valid addresses as before. This patch removes the last user of skb->protocol in IPVS. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21ipvs: changes for local real serverJulian Anastasov1-0/+1
This patch deals with local real servers: - Add support for DNAT to local address (different real server port). It needs ip_vs_out hook in LOCAL_OUT for both families because skb->protocol is not set for locally generated packets and can not be used to set 'af'. - Skip packets in ip_vs_in marked with skb->ipvs_property because ip_vs_out processing can be executed in LOCAL_OUT but we still have the conn_out_get check in ip_vs_in. - Ignore packets with inet->nodefrag from local stack - Require skb_dst(skb) != NULL because we use it to get struct net - Add support for changing the route to local IPv4 stack after DNAT depending on the source address type. Local client sets output route and the remote client sets input route. It looks like IPv6 does not need such rerouting because the replies use addresses from initial incoming header, not from skb route. - All transmitters now have strict checks for the destination address type: redirect from non-local address to local real server requires NAT method, local address can not be used as source address when talking to remote real server. - Now LOCALNODE is not set explicitly as forwarding method in real server to allow the connections to provide correct forwarding method to the backup server. Not sure if this breaks tools that expect to see 'Local' real server type. If needed, this can be supported with new flag IP_VS_DEST_F_LOCAL. Now it should be possible connections in backup that lost their fwmark information during sync to be forwarded properly to their daddr, even if it is local address in the backup server. By this way backup could be used as real server for DR or TUN, for NAT there are some restrictions because tuple collisions in conntracks can create problems for the traffic. - Call ip_vs_dst_reset when destination is updated in case some real server IP type is changed between local and remote. [ horms@verge.net.au: removed trailing whitespace ] Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21ipvs: do not schedule conns from real serversJulian Anastasov1-1/+2
This patch is needed to avoid scheduling of packets from local real server when we add ip_vs_in in LOCAL_OUT hook to support local client. Currently, when ip_vs_in can not find existing connection it tries to create new one by calling ip_vs_schedule. The default indication from ip_vs_schedule was if connection was scheduled to real server. If real server is not available we try to use the bypass forwarding method or to send ICMP error. But in some cases we do not want to use the bypass feature. So, add flag 'ignored' to indicate if the scheduler ignores this packet. Make sure we do not create new connections from replies. We can hit this problem for persistent services and local real server when ip_vs_in is added to LOCAL_OUT hook to handle local clients. Also, make sure ip_vs_schedule ignores SYN packets for Active FTP DATA from local real server. The FTP DATA connection should be created on SYN+ACK from client to assign correct connection daddr. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21ipvs: switch to notrack modeJulian Anastasov1-1/+19
Change skb->ipvs_property semantic. This is preparation to support ip_vs_out processing in LOCAL_OUT. ipvs_property=1 will be used to avoid expensive lookups for traffic sent by transmitters. Now when conntrack support is not used we call ip_vs_notrack method to avoid problems in OUTPUT and POST_ROUTING hooks instead of exiting POST_ROUTING as before. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-21ipvs: optimize checksums for appsJulian Anastasov1-2/+10
Avoid full checksum calculation for apps that can provide info whether csum was broken after payload mangling. For now only ip_vs_ftp mangles payload and it updates the csum, so the full recalculation is avoided for all packets. Add CHECKSUM_UNNECESSARY for snat_handler (TCP and UDP). It is needed to support SNAT from local address for the case when csum is fully recalculated. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2010-10-19ipvs: IPv6 tunnel modeHans Schillstrom1-0/+4
IPv6 encapsulation uses a bad source address for the tunnel. i.e. VIP will be used as local-addr and encap. dst addr. Decapsulation will not accept this. Example LVS (eth1 2003::2:0:1/96, VIP 2003::2:0:100) (eth0 2003::1:0:1/96) RS (ethX 2003::1:0:5/96) tcpdump 2003::2:0:100 > 2003::1:0:5: IP6 (hlim 63, next-header TCP (6) payload length: 40) 2003::3:0:10.50991 > 2003::2:0:100.http: Flags [S], cksum 0x7312 (correct), seq 3006460279, win 5760, options [mss 1440,sackOK,TS val 1904932 ecr 0,nop,wscale 3], length 0 In Linux IPv6 impl. you can't have a tunnel with an any cast address receiving packets (I have not tried to interpret RFC 2473) To have receive capabilities the tunnel must have: - Local address set as multicast addr or an unicast addr - Remote address set as an unicast addr. - Loop back addres or Link local address are not allowed. This causes us to setup a tunnel in the Real Server with the LVS as the remote address, here you can't use the VIP address since it's used inside the tunnel. Solution Use outgoing interface IPv6 address (match against the destination). i.e. use ip6_route_output() to look up the route cache and then use ipv6_dev_get_saddr(...) to set the source address of the encapsulated packet. Additionally, cache the results in new destination fields: dst_cookie and dst_saddr and properly check the returned dst from ip6_route_output. We now add xfrm_lookup call only for the tunneling method where the source address is a local one. Signed-off-by:Hans Schillstrom <hans.schillstrom@ericsson.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-04IPVS: Allow configuration of persistence enginesSimon Horman1-0/+1
Allow the persistence engine of a virtual service to be set, edited and unset. This feature only works with the netlink user-space interface. Signed-off-by: Simon Horman <horms@verge.net.au> Acked-by: Julian Anastasov <ja@ssi.bg>
2010-10-04IPVS: management of persistence engine modulesSimon Horman1-0/+6
This is based heavily on the scheduler management code Signed-off-by: Simon Horman <horms@verge.net.au> Acked-by: Julian Anastasov <ja@ssi.bg>
2010-10-04IPVS: Add persistence engine data to /proc/net/ip_vs_connSimon Horman1-0/+1
This shouldn't break compatibility with userspace as the new data is at the end of the line. I have confirmed that this doesn't break ipvsadm, the main (only?) user-space user of this data. Signed-off-by: Simon Horman <horms@verge.net.au> Acked-by: Julian Anastasov <ja@ssi.bg>
2010-10-04IPVS: Add struct ip_vs_peSimon Horman1-1/+27
Signed-off-by: Simon Horman <horms@verge.net.au> Acked-by: Julian Anastasov <ja@ssi.bg>
2010-10-04IPVS: Add struct ip_vs_conn_paramSimon Horman1-14/+30
Signed-off-by: Simon Horman <horms@verge.net.au> Acked-by: Julian Anastasov <ja@ssi.bg>
2010-09-21ipvs: make rerouting optional with snat_rerouteJulian Anastasov1-0/+1
Add new sysctl flag "snat_reroute". Recent kernels use ip_route_me_harder() to route LVS-NAT responses properly by VIP when there are multiple paths to client. But setups that do not have alternative default routes can skip this routing lookup by using snat_reroute=0. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-09-21ipvs: netfilter connection tracking changesJulian Anastasov1-1/+43
Add more code to IPVS to work with Netfilter connection tracking and fix some problems. - Allow IPVS to be compiled without connection tracking as in 2.6.35 and before. This can avoid keeping conntracks for all IPVS connections because this costs memory. ip_vs_ftp still depends on connection tracking and NAT as implemented for 2.6.36. - Add sysctl var "conntrack" to enable connection tracking for all IPVS connections. For loaded IPVS directors it needs tuning of nf_conntrack_max limit. - Add IP_VS_CONN_F_NFCT connection flag to request the connection to use connection tracking. This allows user space to provide this flag, for example, in dest->conn_flags. This can be useful to request connection tracking per real server instead of forcing it for all connections with the "conntrack" sysctl. This flag is set currently only by ip_vs_ftp and of course by "conntrack" sysctl. - Add ip_vs_nfct.c file to hold all connection tracking code, by this way main code should not depend of netfilter conntrack support. - Return back the ip_vs_post_routing handler as in 2.6.35 and use skb->ipvs_property=1 to allow IPVS to work without connection tracking Connection tracking: - most of the code is already in 2.6.36-rc - alter conntrack reply tuple for LVS-NAT connections when first packet from client is forwarded and conntrack state is NEW or RELATED. Additionally, alter reply for RELATED connections from real server, again for packet in original direction. - add IP_VS_XMIT_TUNNEL to confirm conntrack (without altering reply) for LVS-TUN early because we want to call nf_reset. It is needed because we add IPIP header and the original conntrack should be preserved, not destroyed. The transmitted IPIP packets can reuse same conntrack, so we do not set skb->ipvs_property. - try to destroy conntrack when the IPVS connection is destroyed. It is not fatal if conntrack disappears before that, it depends on the used timers. Fix problems from long time: - add skb->ip_summed = CHECKSUM_NONE for the LVS-TUN transmitters Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-09-17ipvs: extend connection flags to 32 bitsJulian Anastasov1-1/+1
- the sync protocol supports 16 bits only, so bits 0..15 should be used only for flags that should go to backup server, bits 16 and above should be allocated for flags not sent to backup. - use IP_VS_CONN_F_DEST_MASK as mask of connection flags in destination that can be changed by user space - allow IP_VS_CONN_F_ONE_PACKET to be set in destination Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-09-08ipvs: fix active FTPJulian Anastasov1-0/+3
- Do not create expectation when forwarding the PORT command to avoid blocking the connection. The problem is that nf_conntrack_ftp.c:help() tries to create the same expectation later in POST_ROUTING and drops the packet with "dropping packet" message after failure in nf_ct_expect_related. - Change ip_vs_update_conntrack to alter the conntrack for related connections from real server. If we do not alter the reply in this direction the next packet from client sent to vport 20 comes as NEW connection. We alter it but may be some collision happens for both conntracks and the second conntrack gets destroyed immediately. The connection stucks too. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02ipvs: provide default ip_vs_conn_{in,out}_get_protoSimon Horman1-0/+12
This removes duplicate code by providing a default implementation which is used by 3 of the 4 modules that provide these call. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-07-23IPVS: make FTP work with full NAT supportHannes Eder1-2/+0
Use nf_conntrack/nf_nat code to do the packet mangling and the TCP sequence adjusting. The function 'ip_vs_skb_replace' is now dead code, so it is removed. To SNAT FTP, use something like: % iptables -t nat -A POSTROUTING -m ipvs --vaddr 192.168.100.30/32 \ --vport 21 -j SNAT --to-source 192.168.10.10 and for the data connections in passive mode: % iptables -t nat -A POSTROUTING -m ipvs --vaddr 192.168.100.30/32 \ --vportctl 21 -j SNAT --to-source 192.168.10.10 using '-m state --state RELATED' would also works. Make sure the kernel modules ip_vs_ftp, nf_conntrack_ftp, and nf_nat_ftp are loaded. [ up-port and minor fixes by Simon Horman <horms@verge.net.au> ] Signed-off-by: Hannes Eder <heder@google.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-18ipvs: SCTP Trasport Loadbalancing SupportVenkata Mohan Reddy1-1/+21
Enhance IPVS to load balance SCTP transport protocol packets. This is done based on the SCTP rfc 4960. All possible control chunks have been taken care. The state machine used in this code looks some what lengthy. I tried to make the state machine easy to understand. Signed-off-by: Venkata Mohan Reddy Koppula <mohanreddykv@gmail.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-05IPVS: Allow boot time change of hash sizeCatalin(ux) M. BOIE1-11/+5
I was very frustrated about the fact that I have to recompile the kernel to change the hash size. So, I created this patch. If IPVS is built-in you can append ip_vs.conn_tab_bits=?? to kernel command line, or, if you built IPVS as modules, you can add options ip_vs conn_tab_bits=??. To keep everything backward compatible, you still can select the size at compile time, and that will be used as default. It has been about a year since this patch was originally posted and subsequently dropped on the basis of insufficient test data. Mark Bergsma has provided the following test results which seem to strongly support the need for larger hash table sizes: We do however run into the same problem with the default setting (212 = 4096 entries), as most of our LVS balancers handle around a million connections/SLAB entries at any point in time (around 100-150 kpps load). With only 4096 hash table entries this implies that each entry consists of a linked list of 256 connections *on average*. To provide some statistics, I did an oprofile run on an 2.6.31 kernel, with both the default 4096 table size, and the same kernel recompiled with IP_VS_CONN_TAB_BITS set to 18 (218 = 262144 entries). I built a quick test setup with a part of Wikimedia/Wikipedia's live traffic mirrored by the switch to the test host. With the default setting, at ~ 120 kpps packet load we saw a typical %si CPU usage of around 30-35%, and oprofile reported a hot spot in ip_vs_conn_in_get: samples % image name app name symbol name 1719761 42.3741 ip_vs.ko ip_vs.ko ip_vs_conn_in_get 302577 7.4554 bnx2 bnx2 /bnx2 181984 4.4840 vmlinux vmlinux __ticket_spin_lock 128636 3.1695 vmlinux vmlinux ip_route_input 74345 1.8318 ip_vs.ko ip_vs.ko ip_vs_conn_out_get 68482 1.6874 vmlinux vmlinux mwait_idle After loading the recompiled kernel with 218 entries, %si CPU usage dropped in half to around 12-18%, and oprofile looks much healthier, with only 7% spent in ip_vs_conn_in_get: samples % image name app name symbol name 265641 14.4616 bnx2 bnx2 /bnx2 143251 7.7986 vmlinux vmlinux __ticket_spin_lock 140661 7.6576 ip_vs.ko ip_vs.ko ip_vs_conn_in_get 94364 5.1372 vmlinux vmlinux mwait_idle 86267 4.6964 vmlinux vmlinux ip_route_input [ horms@verge.net.au: trivial up-port and minor style fixes ] Signed-off-by: Catalin(ux) M. BOIE <catab@embedromix.ro> Cc: Mark Bergsma <mark@wikimedia.org> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-11-04net: cleanup include/netEric Dumazet1-4/+2
This cleanup patch puts struct/union/enum opening braces, in first line to ease grep games. struct something { becomes : struct something { Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05net: mark read-only arrays as constJan Engelhardt1-1/+2
String literals are constant, and usually, we can also tag the array of pointers const too, moving it to the .rodata section. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02IPVS: use pr_err and friends instead of IP_VS_ERR and friendsHannes Eder1-5/+2
Since pr_err and friends are used instead of printk there is no point in keeping IP_VS_ERR and friends. Furthermore make use of '__func__' instead of hard coded function names. Signed-off-by: Hannes Eder <heder@google.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30IPVS: use pr_fmtHannes Eder1-59/+60
While being at it cleanup whitespace. Signed-off-by: Hannes Eder <heder@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-14net: replace __constant_{endian} uses in net headersHarvey Harrison1-2/+2
Base versions handle constant folding now. For headers exposed to userspace, we must only expose the __ prefixed versions. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19include/net net/ - csum_partial - remove unnecessary castsJoe Perches1-3/+3
The first argument to csum_partial is const void * casts to char/u8 * are not necessary Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03IPVS: Remove supports_ipv6 scheduler flagJulius Volz1-3/+0
Remove the 'supports_ipv6' scheduler flag since all schedulers now support IPv6. Signed-off-by: Julius Volz <julius.volz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31misc: replace NIPQUAD()Harvey Harrison1-2/+2
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29net: replace %p6 with %pI6Harvey Harrison1-1/+1
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28net: replace uses of NIP6_FMT with %p6Harvey Harrison1-2/+2
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-16include: replace __FUNCTION__ with __func__Harvey Harrison1-2/+2
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-01ipv4: Make inet_sock.h independent of route.hKOVACS Krisztian1-0/+1
inet_iif() in inet_sock.h requires route.h. Since users of inet_iif() usually require other route.h functionality anyway this patch moves inet_iif() to route.h. Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-09ipvs: Embed user stats structure into kernel stats structureSven Wegener1-19/+2
Instead of duplicating the fields, integrate a user stats structure into the kernel stats structure. This is more robust when the members are changed, because they are now automatically kept in sync. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Reviewed-by: Julius Volz <juliusv@google.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-09ipvs: Restrict connection table size via KconfigSven Wegener1-9/+1
Instead of checking the value in include/net/ip_vs.h, we can just restrict the range in our Kconfig file. This will prevent values outside of the range early. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Reviewed-by: Julius Volz <juliusv@google.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05IPVS: Adjust various debug outputs to use new macrosJulius Volz1-20/+33
Adjust various debug outputs to use the new *_BUF macro variants for correct output of v4/v6 addresses. Signed-off-by: Julius Volz <juliusv@google.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05IPVS: Convert real server lookup functionsJulius Volz1-3/+5
Convert functions for looking up destinations (real servers) to support IPv6 services/dests. Signed-off-by: Julius Volz <juliusv@google.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05IPVS: Add and bind IPv6 xmit functionsJulius Volz1-1/+19
Add xmit functions for IPv6. Also add the already needed __ip_vs_get_out_rt_v6() to ip_vs_core.c. Bind the new xmit functions to v6 connections. Signed-off-by: Julius Volz <juliusv@google.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05IPVS: Extend functions for getting/creating connectionsJulius Volz1-5/+11
Extend functions for getting/creating connections and connection templates for IPv6 support and fix the callers. Signed-off-by: Julius Volz <juliusv@google.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05IPVS: Extend protocol DNAT/SNAT and state handlersJulius Volz1-0/+11
Extend protocol DNAT/SNAT and state handlers to work with IPv6. Also change/introduce new checksumming helper functions for this. Signed-off-by: Julius Volz <juliusv@google.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05IPVS: Add 'af' args to protocol handler functionsJulius Volz1-6/+9
Add 'af' arguments to conn_schedule(), conn_in_get(), conn_out_get() and csum_check() function pointers in struct ip_vs_protocol. Extend the respective functions for TCP, UDP, AH and ESP and adjust the callers. The changes in the callers need to be somewhat extensive, since they now need to pass a filled out struct ip_vs_iphdr * to the modified functions instead of a struct iphdr *. Signed-off-by: Julius Volz <juliusv@google.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05IPVS: Add IPv6 support flag to schedulersJulius Volz1-0/+3
Add 'supports_ipv6' flag to struct ip_vs_scheduler to indicate whether a scheduler supports IPv6. Set the flag to 1 in schedulers that work with IPv6, 0 otherwise. This flag is checked in a later patch while trying to add a service with a specific scheduler. Adjust debug in v6-supporting schedulers to work with both address families. Signed-off-by: Julius Volz <juliusv@google.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05IPVS: Add v6 support to ip_vs_service_get()Julius Volz1-1/+2
Add support for selecting services based on their address family to ip_vs_service_get() and adjust the callers. Signed-off-by: Julius Volz <juliusv@google.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05IPVS: Add internal versions of sockopt interface structsJulius Volz1-0/+39
Add extended internal versions of struct ip_vs_service_user and struct ip_vs_dest_user (the originals can't be modified as they are part of the old sockopt interface). Adjust ip_vs_ctl.c to work with the new data structures and add some minor AF-awareness. Signed-off-by: Julius Volz <juliusv@google.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05IPVS: Add debug macros for v4 and v6 address outputJulius Volz1-0/+42
Add some debugging macros that allow conditional output of either v4 or v6 addresses, depending on an 'af' parameter. This is done by creating a temporary string buffer in an outer debug macro and writing addresses' string representations into it from another macro which can only be used when inside the outer one. Signed-off-by: Julius Volz <juliusv@google.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05IPVS: Add general v4/v6 helper functions / data structuresJulius Volz1-0/+49
Add a struct ip_vs_iphdr for easier handling of common v4 and v6 header fields in the same code path. ip_vs_fill_iphdr() helps to fill this struct from an IPv4 or IPv6 header. Add further helper functions for copying and comparing addresses. Signed-off-by: Julius Volz <juliusv@google.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2008-09-05IPVS: Change IPVS data structures to support IPv6 addressesJulius Volz1-6/+12
Introduce new 'af' fields into IPVS data structures for specifying an entry's address family. Convert IP addresses to be of type union nf_inet_addr. Signed-off-by: Julius Volz <juliusv@google.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2008-08-15ipvs: Create init functions for estimator codeSven Wegener1-0/+2
Commit 8ab19ea36c5c5340ff598e4d15fc084eb65671dc ("ipvs: Fix possible deadlock in estimator code") fixed a deadlock condition, but that condition can only happen during unload of IPVS, because during normal operation there is at least our global stats structure in the estimator list. The mod_timer() and del_timer_sync() calls are actually initialization and cleanup code in disguise. Let's make it explicit and move them to their own init and cleanup function. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Signed-off-by: Simon Horman <horms@verge.net.au>
2008-08-11ipvs: Embed estimator object into stats objectSven Wegener1-2/+26
There's no reason for dynamically allocating an estimator object for every stats object. Directly embed an estimator object into every stats object and switch to using the kernel-provided list implementation. This makes the code much simpler and faster, as we do not need to traverse the list of all estimators to find the one belonging to a stats object. There's no need to use an rwlock, as we only have one reader. Also reorder the members of the estimator structure slightly to avoid padding overhead. This can't be done with the stats object as the members are currently copied to our user space object via memcpy() and changing it would break ABI. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Simon Horman <horms@verge.net.au>
2008-08-11ipvs: Mark net_vs_ctl_path constSven Wegener1-1/+1
Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Simon Horman <horms@verge.net.au>
2008-08-11ipvs: Use ARRAY_SIZE()Sven Wegener1-1/+1
Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Simon Horman <horms@verge.net.au>
2008-07-31ipvs: Move userspace definitions to include/linux/ip_vs.hJulius Volz1-245/+8
Current versions of ipvsadm include "/usr/src/linux/include/net/ip_vs.h" directly. This file also contains kernel-only definitions. Normally, public definitions should live in include/linux, so this patch moves the definitions shared with userspace to a new file, "include/linux/ip_vs.h". This also removes the unused NFC_IPVS_PROPERTY bitmask, which was once used to point into skb->nfcache. To make old ipvsadms still compile with this, the old header file includes the new one. Thanks to Dave Miller and Horms for noting/adding the missing Kbuild entry for the new header file. Signed-off-by: Julius Volz <juliusv@google.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.