aboutsummaryrefslogtreecommitdiffstats
path: root/include/net/nfc/nci_core.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-08-20NFC: nci: export nci_core_reset and nci_core_initRobert Baldyga1-0/+2
Some drivers needs to have ability to reinit NCI core, for example after updating firmware in setup() of post_setup() callback. This patch makes nci_core_reset() and nci_core_init() functions public, to make it possible. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20NFC: nci: Add post_setup handlerRobert Baldyga1-0/+1
Some drivers require non-standard configuration after NCI_CORE_INIT request, because they need to know ndev->manufact_specific_info or ndev->manufact_id. This patch adds post_setup handler allowing to do such custom configuration. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-11NFC: nci: add generic uart supportVincent Cuissard1-0/+47
Some NFC controller supports UART as host interface. As with SPI, a lot of code can be shared between vendor drivers. This patch add the generic support of UART and provides some extension API for vendor specific needs. This code is strongly inspired by the Bluetooth HCI ldisc implementation. NCI UART vendor drivers will have to register themselves to this layer via nci_uart_register. Underlying tty will have to be configured from user land thanks to an ioctl. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: Introduce vendor commands structuresSamuel Ortiz1-0/+7
Together with inline routines to associate a vendor commands array with an NFC device. Vendor commands allow vendors to implement their very specific operations from driver code instead of adding new stack ops for non NFC generic commands. Vendors need to select their own unique IDs and use that as a namespace for defining sub commands. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: Add nci_prop_cmd allowing to send proprietary nci cmdChristophe Ricard1-0/+2
Handle allowing to send proprietary nci commands anywhere in the nci state machine. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: Add nci init ops for early device initializationChristophe Ricard1-0/+1
Some device may need to execute some proprietary commands in order to "wake-up"; Before the nci state initialization. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: Handle proprietary response and notificationsSamuel Ortiz1-0/+14
Allow for drivers to explicitly define handlers for each proprietary notifications and responses they expect to support. Reviewed-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-04-06nfc: nci: Add comment to explain NCI_HCI_MAX_PIPESChristophe Ricard1-0/+4
According to specification etsi 102 622 chapter 4.4 pipes identifier is 7 bits long giving a 127 possible pipes value. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-03-26NFC: nci: Add firmware download supportClément Perrochaud1-0/+1
A simple forward for firmware download (i.e. sending a new firmware to the NFC adapter) from the NFC subsystem to the drivers. This feature is required to update the firmware of NXP-NCI NFC controllers but can be used by any NCI driver. This feature has been present in the HCI subsystem since 9a695d. Signed-off-by: Clément Perrochaud <clement.perrochaud@effinnov.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04NFC: nci: Move logical connection structure allocationChristophe Ricard1-0/+1
conn_info is currently allocated only after nfcee_discovery_ntf which is not generic enough for logical connection other than NFCEE. The corresponding conn_info is now created in nci_core_conn_create_rsp(). Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04NFC: nci: Support all destinations type when creating a connectionChristophe Ricard1-1/+3
The current implementation limits nci_core_conn_create_req() to only manage NCI_DESTINATION_NFCEE. Add new parameters to nci_core_conn_create() to support all destination types described in the NCI specification. Because there are some parameters with variable size dynamic buffer allocation is needed. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04NFC: nci: Add reference to the RF logical connectionChristophe Ricard1-0/+1
The NCI_STATIC_RF_CONN_ID logical connection is the most used connection. Keeping it directly accessible in the nci_dev structure will simplify and optimize the access. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02NFC: nci: Add HCI over NCI protocol supportChristophe Ricard1-0/+93
According to the NCI specification, one can use HCI over NCI to talk with specific NFCEE. The HCI network is viewed as one logical NFCEE. This is needed to support secure element running HCI only firmwares embedded on an NCI capable chipset, like e.g. the st21nfcb. There is some duplication between this piece of code and the HCI core code, but the latter would need to be abstracted even more to be able to use NCI as a logical transport for HCP packets. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02NFC: nci: Support logical connections managementChristophe Ricard1-0/+3
In order to communicate with an NFCEE, we need to open a logical connection to it, by sending the NCI_OP_CORE_CONN_CREATE_CMD command to the NFCC. It's left up to the drivers to decide when to close an already opened logical connection. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02NFC: nci: Add NFCEE enabling and disabling supportChristophe Ricard1-0/+1
NFCEEs can be enabled or disabled by sending the NCI_OP_NFCEE_MODE_SET_CMD command to the NFCC. This patch provides an API for drivers to enable and disable e.g. their NCI discoveredd secure elements. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02NFC: nci: Add NFCEE discover supportChristophe Ricard1-0/+4
NFCEEs (NFC Execution Environment) have to be explicitly discovered by sending the NCI_OP_NFCEE_DISCOVER_CMD command. The NFCC will respond to this command by telling us how many NFCEEs are connected to it. Then the NFCC sends a notification command for each and every NFCEE connected. Here we implement support for sending NCI_OP_NFCEE_DISCOVER_CMD command, receiving the response and the potential notifications. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02NFC: nci: Add dynamic logical connections supportChristophe Ricard1-7/+25
The current NCI core only support the RF static connection. For other NFC features such as Secure Element communication, we may need to create logical connections to the NFCEE (Execution Environment. In order to track each logical connection ID dynamically, we add a linked list of connection info pointers to the nci_dev structure. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Add se_io NCI operandChristophe Ricard1-0/+3
se_io allows to send apdu over the CLF to the embedded Secure Element. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Update nci_disable_se to run proprietary commands to disable a secure elementChristophe Ricard1-0/+1
Some NFC controller using NCI protocols may need a proprietary commands flow to disable a secure element Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Update nci_enable_se to run proprietary commands to enable a secure elementChristophe Ricard1-0/+1
Some NFC controller using NCI protocols may need a proprietary commands flow to enable a secure element Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Update nci_discover_se to run proprietary commands to discover all available secure elementChristophe Ricard1-0/+1
Some NFC controller using NCI protocols may need a proprietary commands flow to discover all available secure element Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-11-28NFC: NCI: Handle Target mode activationJulien Lefrique1-0/+3
Changes: * Extract the Listen mode activation parameters from RF_INTF_ACTIVATED_NTF. * Store the General Bytes of ATR_REQ. * Signal that Target mode is activated in case of an activation in NFC-DEP. * Update the NCI state accordingly. * Use the various constants defined in nfc.h. * Fix the ATR_REQ and ATR_RES maximum size. As per NCI 1.0 and NCI 1.1, the Activation Parameters for both Poll and Listen mode contain all the bytes of ATR_REQ/ATR_RES starting and including Byte 3 as defined in [DIGITAL]. In [DIGITAL], the maximum size of ATR_REQ/ATR_RES is 64 bytes and they are numbered starting from Byte 1. Signed-off-by: Julien Lefrique <lefrique@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-24NFC: nci: Add support for proprietary RF ProtocolsChristophe Ricard1-4/+5
In NFC Forum NCI specification, some RF Protocol values are reserved for proprietary use (from 0x80 to 0xfe). Some CLF vendor may need to use one value within this range for specific technology. Furthermore, some CLF may not becompliant with NFC Froum NCI specification 2.0 and therefore will not support RF Protocol value 0x06 for PROTOCOL_T5T as mention in a draft specification and in a recent push. Adding get_rf_protocol handle to the nci_ops structure will help to set the correct technology to target. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-17Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davemJohn W. Linville1-0/+2
2014-01-07NFC: NCI: Add set_config APIAmitkumar Karwar1-0/+1
This API can be used by drivers to send their custom configuration using SET_CONFIG NCI command to the device. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-07NFC: NCI: Add setup handlerAmitkumar Karwar1-0/+1
Some drivers require special configuration while initializing. This patch adds setup handler for this custom configuration. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-12-06include/net/: Fix FSF address in file headersJeff Kirsher1-2/+1
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25NFC: NCI: Modify NCI SPI to implement CS/INT handshake per the specEric Lapuyade1-10/+3
The NFC Forum NCI specification defines both a hardware and software protocol when using a SPI physical transport to connect an NFC NCI Chipset. The hardware requirement is that, after having raised the chip select line, the SPI driver must wait for an INT line from the NFC chipset to raise before it sends the data. The chip select must be raised first though, because this is the signal that the NFC chipset will detect to wake up and then raise its INT line. If the INT line doesn't raise in a timely fashion, the SPI driver should abort operation. When data is transferred from Device host (DH) to NFC Controller (NFCC), the signaling sequence is the following: Data Transfer from DH to NFCC • 1-Master asserts SPI_CSN • 2-Slave asserts SPI_INT • 3-Master sends NCI-over-SPI protocol header and payload data • 4-Slave deasserts SPI_INT • 5-Master deasserts SPI_CSN When data must be transferred from NFCC to DH, things are a little bit different. Data Transfer from NFCC to DH • 1-Slave asserts SPI_INT -> NFC chipset irq handler called -> process reading from SPI • 2-Master asserts SPI_CSN • 3-Master send 2-octet NCI-over-SPI protocol header • 4-Slave sends 2-octet NCI-over-SPI protocol payload length • 5-Slave sends NCI-over-SPI protocol payload • 6-Master deasserts SPI_CSN In this case, SPI driver should function normally as it does today. Note that the INT line can and will be lowered anytime between beginning of step 3 and end of step 5. A low INT is therefore valid after chip select has been raised. This would be easily implemented in a single driver. Unfortunately, we don't write the SPI driver and I had to imagine some workaround trick to get the SPI and NFC drivers to work in a synchronized fashion. The trick is the following: - send an empty spi message: this will raise the chip select line, and send nothing. We expect the /CS line will stay arisen because we asked for it in the spi_transfer cs_change field - wait for a completion, that will be completed by the NFC driver IRQ handler when it knows we are in the process of sending data (NFC spec says that we use SPI in a half duplex mode, so we are either sending or receiving). - when completed, proceed with the normal data send. This has been tested and verified to work very consistently on a Nexus 10 (spi-s3c64xx driver). It may not work the same with other spi drivers. The previously defined nci_spi_ops{} whose intended purpose were to address this problem are not used anymore and therefore totally removed. The nci_spi_send() takes a new optional write_handshake_completion completion pointer. If non NULL, the nci spi layer will run the above trick when sending data to the NFC Chip. If NULL, the data is sent normally all at once and it is then the NFC driver responsibility to know what it's doing. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: NCI: nci_spi_recv_frame() now returns (not forward) the read frameEric Lapuyade1-1/+1
Previously, nci_spi_recv_frame() would directly transmit incoming frames to the NCI Core. However, it turns out that some NFC NCI Chips will add additional proprietary headers that must be handled/removed before NCI Core gets a chance to handle the frame. With this modification, the chip phy or driver are now responsible to transmit incoming frames to NCI Core after proper treatment, and NCI SPI becomes a driver helper instead of sitting between the NFC driver and NCI Core. As a general rule in NFC, *_recv_frame() APIs are used to deliver an incoming frame to an upper layer. To better suit the actual purpose of nci_spi_recv_frame(), and go along with its nci_spi_send() counterpart, the function is renamed to nci_spi_read() The skb is returned as the function result Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: NCI: Simplify NCI SPI to become a simple framing/checking layerEric Lapuyade1-30/+11
NCI SPI layer should not manage the nci dev, this is the job of the nci chipset driver. This layer should be limited to frame/deframe nci packets, and optionnaly check integrity (crc) and manage the ack/nak protocol. The NCI SPI must not be mixed up with an NCI dev. spi_[dev|device] are therefore renamed to a simple spi for more clarity. The header and crc sizes are moved to nci.h so that drivers can use them to reserve space in outgoing skbs. nci_spi_send() is exported to be accessible by drivers. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: NCI: Rename spi ndev -> nsdev and nci_dev -> ndev for consistencyEric Lapuyade1-13/+13
An hci dev is an hdev. An nci dev is an ndev. Calling an nci spi dev an ndev is misleading since it's not the same thing. The nci dev contained in the nci spi dev is also named inconsistently. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Remove the static supported_se fieldSamuel Ortiz1-1/+0
Supported secure elements are typically found during a discovery process initiated when the NFC controller is up and running. For a given NFC chipset there can be many configurations (embedded SE or not, with or without a SIM card wired to the NFC controller SWP interface, etc...) and thus driver code will never know before hand which SEs are available. So we remove this field, it will be replaced by a real SE discovery mechanism. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Add NCI over SPI receiveFrederic Danis1-0/+1
Before any operation, driver interruption is de-asserted to prevent race condition between TX and RX. Transaction starts by emitting "Direct read" and acknowledged mode bytes. Then packet length is read allowing to allocate correct NCI socket buffer. After that payload is retrieved. A delay after the transaction can be added. This delay is determined by the driver during nci_spi_allocate_device() call and can be 0. If acknowledged mode is set: - CRC of header and payload is checked - if frame reception fails (CRC error): NACK is sent - if received frame has ACK or NACK flag: unblock nci_spi_send() Payload is passed to NCI module. At the end, driver interruption is re asserted. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Add NCI over SPI sendFrederic Danis1-0/+3
Before any operation, driver interruption is de-asserted to prevent race condition between TX and RX. The NCI over SPI header is added in front of NCI packet. If acknowledged mode is set, CRC-16-CCITT is added to the packet. Then the packet is forwarded to SPI module to be sent. A delay after the transaction is added. This delay is determined by the driver during nci_spi_allocate_device() call and can be 0. After data has been sent, driver interruption is re-asserted. If acknowledged mode is set, nci_spi_send will block until acknowledgment is received. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Add basic NCI over SPIFrederic Danis1-0/+49
The NFC Forum defines a transport interface based on Serial Peripheral Interface (SPI) for the NFC Controller Interface (NCI). This module implements the SPI transport of NCI, calling SPI module directly to read/write data to NFC controller (NFCC). NFCC driver should provide functions performing device open and close. It should also provide functions asserting/de-asserting interruption to prevent TX/RX race conditions. NFCC driver can also fix a delay between transactions if needed by the hardware. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: NCI: Fix skb->dev usageFrederic Danis1-2/+2
skb->dev is used for carrying a net_device pointer and not an nci_dev pointer. Remove usage of skb-dev to carry nci_dev and replace it by parameter in nci_recv_frame(), nci_send_frame() and driver send() functions. NfcWilink driver is also updated to use those functions. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: Initial Secure Element APISamuel Ortiz1-0/+1
Each NFC adapter can have several links to different secure elements and that property needs to be exported by the drivers. A secure element link can be enabled and disabled, and card emulation will be handled by the currently active one. Otherwise card emulation will be host implemented. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Implement NCI dep_link_up and dep_link_downIlan Elias1-0/+4
During NFC-DEP target activation, store the remote general bytes to be used later in dep_link_up. When dep_link_up is called, activate the NFC-DEP target, and forward the remote general bytes. When dep_link_down is called, deactivate the target. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Set local general bytes in nci_start_pollIlan Elias1-0/+1
If initiator protocol is NFC-DEP, set the local general bytes in nci_start_poll. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06NFC: NCI code identation fixesSamuel Ortiz1-5/+5
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24NFC: Add NCI multiple targets supportIlan Elias1-1/+8
Add the ability to select between multiple targets in NCI. If only one target is found, it will be auto-activated. If more than one target is found, then DISCOVER_NTF will be generated for each target, and the host should select one by calling DISCOVER_SELECT_CMD. Then, the target will be activated. If the activation fails, GENERIC_ERROR_NTF is generated. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24NFC: Clearly separate NCI states from flagsIlan Elias1-4/+10
Make a clear separation between NCI states and flags. This is required in order to support more NCI states (e.g. for multiple targets support). Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24NFC: Add NCI data exchange timerIlan Elias1-0/+3
Add NCI data exchange timer to catch timeouts, and call the data exchange callback with an error. Signed-off-by: Ilan Elias <ilane@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24NFC: Increase NCI deactivate timeoutIlan Elias1-1/+1
Increase NCI deactivate timeout from 5 sec to 30 sec. NCI deactivate procedure might take a long time, depending on the local and remote parameters. Signed-off-by: Ilan Elias <ilane@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04NFC: Update names and structs to NCI spec 1.0 d22Ilan Elias1-2/+4
Addition, deletion, and modification of NCI constants. Changes in NCI commands, responses, and notifications structures. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-11NFC: Removal of unused operations for NCI spec 1.0 d18Ilan Elias1-4/+0
Remove unused NCI operations, e.g. create static rf connection. Signed-off-by: Ilan Elias <ilane@ti.com> Acked-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-11NFC: Update names and structs to NCI spec 1.0 d18Ilan Elias1-5/+6
Addition, deletion and modification of NCI constants. Changes in NCI commands, responses and notifications structures. Signed-off-by: Ilan Elias <ilane@ti.com> Acked-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27NFC: protect nci_data_exchange transactionsIlan Elias1-0/+1
Protect 'cb' and 'cb_context' arguments in nci_data_exchange. In fact, this implements a queue with max length of 1 data exchange transactions in parallel. Signed-off-by: Ilan Elias <ilane@ti.com> Acked-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20NFC: basic NCI protocol implementationIlan Elias1-0/+183
The NFC Controller Interface (NCI) is a standard communication protocol between an NFC Controller (NFCC) and a Device Host (DH), defined by the NFC Forum. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.