aboutsummaryrefslogtreecommitdiffstats
path: root/include/net/nfc (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner2-26/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 399Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 33 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081038.745679586@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner1-10/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner2-26/+2
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-06nfc: nci: Potential off by one in ->pipes[] arrayDan Carpenter1-1/+1
This is similar to commit e285d5bfb7e9 ("NFC: Fix the number of pipes") where we changed NFC_HCI_MAX_PIPES from 127 to 128. As the comment next to the define explains, the pipe identifier is 7 bits long. The highest possible pipe is 127, but the number of possible pipes is 128. As the code is now, then there is potential for an out of bounds array access: net/nfc/nci/hci.c:297 nci_hci_cmd_received() warn: array off by one? 'ndev->hci_dev->pipes[pipe]' '0-127 == 127' Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18NFC: Fix the number of pipesSuren Baghdasaryan1-1/+1
According to ETSI TS 102 622 specification chapter 4.4 pipe identifier is 7 bits long which allows for 128 unique pipe IDs. Because NFC_HCI_MAX_PIPES is used as the number of pipes supported and not as the max pipe ID, its value should be 128 instead of 127. nfc_hci_recv_from_llc extracts pipe ID from packet header using NFC_HCI_FRAGMENT(0x7F) mask which allows for pipe ID value of 127. Same happens when NCI_HCP_MSG_GET_PIPE() is being used. With pipes array having only 127 elements and pipe ID of 127 the OOB memory access will result. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Allen Pais <allen.pais@oracle.com> Cc: "David S. Miller" <davem@davemloft.net> Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05NFC: Add nfc_dbg() macroAndy Shevchenko1-0/+1
In some cases nfc_dbg() is useful. Add such macro to a header. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-11NFC: digital: Add support for NFC DEP Response Waiting TimeThierry Escande1-0/+1
When sending an ATR_REQ, the initiator must wait for the ATR_RES at least 'RWT(nfcdep,activation) + dRWT(nfcdep)' and no more than 'RWT(nfcdep,activation) + dRWT(nfcdep) + dT(nfcdep,initiator)'. This gives a timeout value between 1237 ms and 1337 ms. This patch defines DIGITAL_ATR_RES_RWT to 1337 used for the timeout value of ATR_REQ command. For other DEP PDUs, the initiator must wait between 'RWT + dRWT(nfcdep)' and 'RWT + dRWT(nfcdep) + dT(nfcdep,initiator)' where RWT is given by the following formula: '(256 * 16 / f(c)) * 2^wt' where wt is the value of the TO field in the ATR_RES response and is in the range between 0 and 14. This patch declares a mapping table for wt values and gives RWT max values between 100 ms and 5049 ms. This patch also defines DIGITAL_ATR_RES_TO_WT, the maximum wt value in target mode, to 8. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-11NFC: digital: Fix handling of saved PDU sk_buff pointersThierry Escande1-1/+0
This patch fixes the way an I-PDU is saved in case it needs to be sent again. It is now copied using pskb_copy() and not simply referenced using skb_get() since it could be modified by the driver. digital_in_send_saved_skb() and digital_tg_send_saved_skb() still get a reference on the saved skb which is re-sent but release it if the send operation fails. That way the caller doesn't have to take care about skb ref in case of error. RTOX supervisor PDU must not be saved as this can override a previously saved I-PDU that should be re-sent later on. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-04NFC: digital: Add a delay between poll cyclesThierry Escande1-1/+1
This replaces the polling work struct with a delayed work struct and add a 10 ms delay between 2 poll cycles. This avoids to flood the device with 'switch off'/'switch on' commands. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-04NFC: hci: delete unused nfc_llc_get_rx_head_tail_room()Denys Vlasenko1-4/+0
It used to be EXPORTed, but then EXPORT usage was cleaned up (in 2012), without noticing that the function has no users at all (and curiously, never had any users). Delete it. While at it, remove non-static "inline" hints on nearby functions: these hints don't work across compilation units anyway, and these functions are not used in their .c file, thus they are never inlined. IOW: "inline" here does not help in any way. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: Samuel Ortiz <sameo@linux.intel.com> CC: Christophe Ricard <christophe.ricard@gmail.com> CC: linux-wireless@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-05-04nfc: nci: Add nci_nfcc_loopback to the nci coreChristophe Ricard1-0/+2
For test purpose, provide the generic nci loopback function. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-05-04nfc: nci: Add an additional parameter to identify a connection idChristophe Ricard1-3/+12
According to NCI specification, destination type and destination specific parameters shall uniquely identify a single destination for the Logical Connection. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: netlink: HCI event connectivity implementationChristophe Ricard1-0/+1
Add support for missing HCI event EVT_CONNECTIVITY and forward it to userspace. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-28NFC: nci: non-static functions can not be inlineRobert Dolca1-4/+4
This fixes a build error that seems to be toochain dependent (Not seen with gcc v5.1): In file included from net/nfc/nci/rsp.c:36:0: net/nfc/nci/rsp.c: In function ‘nci_rsp_packet’: include/net/nfc/nci_core.h:355:12: error: inlining failed in call to always_inline ‘nci_prop_rsp_packet’: function body not available inline int nci_prop_rsp_packet(struct nci_dev *ndev, __u16 opcode, Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: NCI: allow spi driver to choose transfer clockVincent Cuissard1-0/+6
In some cases low level drivers might want to update the SPI transfer clock (e.g. during firmware download). This patch adds this support. Without any modification the driver will use the default SPI clock (from pdata or device tree). Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: nfcmrvl: add i2c driverVincent Cuissard1-0/+1
This driver adds the support of I2C-based Marvell NFC controller. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: NCI: export nci_send_frame and nci_send_cmd functionVincent Cuissard1-0/+1
Export nci_send_frame and nci_send_cmd symbols to allow drivers to use it. This is needed for example if NCI is used during firmware download phase. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: netlink: Add mode parameter to deactivate_target functionsChristophe Ricard1-1/+1
In order to manage in a better way the nci poll mode state machine, add mode parameter to deactivate_target functions. This way we can manage different target state. mode parameter make sense only in nci core. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: Add support for proprietary commandsChristophe Ricard1-0/+1
Add support for proprietary commands useful mainly for factory testings. Here is a list: - FACTORY_MODE: Allow to set the driver into a mode where no secure element are activated. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_DM_PUT_DATA: Allow to configure specific CLF registry like for example RF trimmings or low level drivers configurations (I2C, SPI, SWP). - HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing table following RF technology, CLF mode or protocol. - HCI_DM_GET_INFO: Allow to retrieve CLF information. - HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low level drivers configurations or RF trimmings. - HCI_DM_DIRECT_LOAD: Allow to load a firmware into the CLF. A complete packet can be more than 8KB. - HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF configuration changes without CLF power off. - HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the white list). - HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF technology. When using this command to anti-collision is done. - HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF connectivity. - HCI_DM_VDC_MEASUREMENT_VALUE: Allow to measure the field applied on the CLF antenna. A value between 0 and 0x0f is returned. 0 is maximum. - HCI_DM_FWUPD_START: Allow to put CLF into firmware update mode. It is a specific CLF command as there is no GPIO for this. - HCI_DM_FWUPD_END: Allow to complete firmware update. - HCI_DM_VDC_VALUE_COMPARISON: Allow to compare the field applied on the CLF antenna to a reference value. - MANUFACTURER_SPECIFIC: Allow to retrieve manufacturer specific data received during a NCI_CORE_INIT_CMD. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: st-nci: Add support for NCI_HCI_IDENTITY_MGMT_GATEChristophe Ricard1-0/+1
NCI_HCI_IDENTITY_MGMT_GATE might be useful to get information about hardware or firmware version. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: add nci_hci_clear_all_pipes functionsChristophe Ricard1-0/+1
nci_hci_clear_all_pipes might be use full in some cases for example after a firmware update. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: add nci_get_conn_info_by_id functionRobert Dolca1-0/+1
This functin takes as a parameter a pointer to the nci_dev struct and the first byte from the values of the first domain specific parameter that was used for the connection creation. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: rename nci_prop_ops to nci_driver_opsRobert Dolca1-3/+3
Initially it was used to create hooks in the driver for proprietary operations. Currently it is being used for hooks for both proprietary and generic operations. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Allow the driver to set handler for core nci opsRobert Dolca1-2/+9
The driver may be required to act when some responses or notifications arrive. For example the NCI core does not have a handler for NCI_OP_CORE_GET_CONFIG_RSP. The NFCC can send a config response that has to be read by the driver and the packet may contain vendor specific data. The Fields Peak driver needs to take certain actions when a reset notification arrives (packet also not handled by the nfc core). The driver handlers do not interfere with the core and they are called after the core processes the packet. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Introduce nci_core_cmdRobert Dolca1-0/+1
This allows sending core commands from the driver. The driver should be able to send NCI core commands like CORE_GET_CONFIG_CMD. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Introduce new core opcodesRobert Dolca1-0/+7
Add NCI_OP_CORE_GET_CONFIG_CMD, NCI_OP_CORE_GET_CONFIG_RSP and NCI_OP_CORE_RESET_NTF. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Add function to get max packet size for connRobert Dolca1-0/+1
FDP driver needs to send the firmware as regular packets (not fragmented). The driver should have a way to get the max packet size for a given connection. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20nfc: netlink: Add capability to reply to vendor_cmd with dataChristophe Ricard1-0/+41
A proprietary vendor command may send back useful data to the user application. For example, the field level applied on the NFC router antenna. Still based on net/wireless/nl80211.c implementation, add nfc_vendor_cmd_alloc_reply_skb and nfc_vendor_cmd_reply in order to send back over netlink data generated by a proprietary command. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20NFC: nci: export nci_core_reset and nci_core_initRobert Baldyga1-0/+2
Some drivers needs to have ability to reinit NCI core, for example after updating firmware in setup() of post_setup() callback. This patch makes nci_core_reset() and nci_core_init() functions public, to make it possible. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20NFC: nci: Add post_setup handlerRobert Baldyga1-0/+1
Some drivers require non-standard configuration after NCI_CORE_INIT request, because they need to know ndev->manufact_specific_info or ndev->manufact_id. This patch adds post_setup handler allowing to do such custom configuration. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-11NFC: nci: add generic uart supportVincent Cuissard2-0/+48
Some NFC controller supports UART as host interface. As with SPI, a lot of code can be shared between vendor drivers. This patch add the generic support of UART and provides some extension API for vendor specific needs. This code is strongly inspired by the Bluetooth HCI ldisc implementation. NCI UART vendor drivers will have to register themselves to this layer via nci_uart_register. Underlying tty will have to be configured from user land thanks to an ioctl. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: Introduce vendor commands structuresSamuel Ortiz3-0/+36
Together with inline routines to associate a vendor commands array with an NFC device. Vendor commands allow vendors to implement their very specific operations from driver code instead of adding new stack ops for non NFC generic commands. Vendors need to select their own unique IDs and use that as a namespace for defining sub commands. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: Add nci_prop_cmd allowing to send proprietary nci cmdChristophe Ricard1-0/+2
Handle allowing to send proprietary nci commands anywhere in the nci state machine. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: Add nci init ops for early device initializationChristophe Ricard1-0/+1
Some device may need to execute some proprietary commands in order to "wake-up"; Before the nci state initialization. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: Handle proprietary response and notificationsSamuel Ortiz1-0/+14
Allow for drivers to explicitly define handlers for each proprietary notifications and responses they expect to support. Reviewed-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-04-06nfc: nci: Add comment to explain NCI_HCI_MAX_PIPESChristophe Ricard1-0/+4
According to specification etsi 102 622 chapter 4.4 pipes identifier is 7 bits long giving a 127 possible pipes value. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-04-06nfc: Reduce nfc_evt_transaction params length to 0Christophe Ricard1-1/+1
According to etsi 102 622 chapter 11.2.2.4 EVT_TRANSACTION, the nfc_evt_transaction parameters can be 0 up to 255 byte long. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-04-06nfc: hci: Add comment to explain NFC_HCI_MAX_PIPESChristophe Ricard1-0/+4
According to specification etsi 102 622 chapter 4.4 pipes identifier is 7 bits long giving a 127 possible pipes value. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-03-26NFC: nci: Add firmware download supportClément Perrochaud1-0/+1
A simple forward for firmware download (i.e. sending a new firmware to the NFC adapter) from the NFC subsystem to the drivers. This feature is required to update the firmware of NXP-NCI NFC controllers but can be used by any NCI driver. This feature has been present in the HCI subsystem since 9a695d. Signed-off-by: Clément Perrochaud <clement.perrochaud@effinnov.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04NFC: nci: Move logical connection structure allocationChristophe Ricard1-0/+1
conn_info is currently allocated only after nfcee_discovery_ntf which is not generic enough for logical connection other than NFCEE. The corresponding conn_info is now created in nci_core_conn_create_rsp(). Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04NFC: nci: Change credits field to credits_cntChristophe Ricard1-1/+1
For consistency sake change nci_core_conn_create_rsp structure credits field to credits_cnt. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04NFC: nci: Support all destinations type when creating a connectionChristophe Ricard2-9/+13
The current implementation limits nci_core_conn_create_req() to only manage NCI_DESTINATION_NFCEE. Add new parameters to nci_core_conn_create() to support all destination types described in the NCI specification. Because there are some parameters with variable size dynamic buffer allocation is needed. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04NFC: nci: Add reference to the RF logical connectionChristophe Ricard1-0/+1
The NCI_STATIC_RF_CONN_ID logical connection is the most used connection. Keeping it directly accessible in the nci_dev structure will simplify and optimize the access. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02NFC: nci: Add RF NFCEE action notification supportChristophe Ricard1-0/+8
The NFCC sends an NCI_OP_RF_NFCEE_ACTION_NTF notification to the host (DH) to let it know that for example an RF transaction with a payment reader is done. For now the notification handler is empty. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02NFC: Forward NFC_EVT_TRANSACTION to user spaceChristophe Ricard1-0/+27
NFC_EVT_TRANSACTION is sent through netlink in order for a specific application running on a secure element to notify userspace of an event. Typically the secure element application counterpart on the host could interpret that event and act upon it. Forwarded information contains: - SE host generating the event - Application IDentifier doing the operation - Applications parameters Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02NFC: nci: Add HCI over NCI protocol supportChristophe Ricard1-0/+93
According to the NCI specification, one can use HCI over NCI to talk with specific NFCEE. The HCI network is viewed as one logical NFCEE. This is needed to support secure element running HCI only firmwares embedded on an NCI capable chipset, like e.g. the st21nfcb. There is some duplication between this piece of code and the HCI core code, but the latter would need to be abstracted even more to be able to use NCI as a logical transport for HCP packets. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02NFC: nci: Support logical connections managementChristophe Ricard2-0/+33
In order to communicate with an NFCEE, we need to open a logical connection to it, by sending the NCI_OP_CORE_CONN_CREATE_CMD command to the NFCC. It's left up to the drivers to decide when to close an already opened logical connection. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02NFC: nci: Add NFCEE enabling and disabling supportChristophe Ricard2-0/+10
NFCEEs can be enabled or disabled by sending the NCI_OP_NFCEE_MODE_SET_CMD command to the NFCC. This patch provides an API for drivers to enable and disable e.g. their NCI discoveredd secure elements. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02NFC: nci: Add NFCEE discover supportChristophe Ricard1-0/+4
NFCEEs (NFC Execution Environment) have to be explicitly discovered by sending the NCI_OP_NFCEE_DISCOVER_CMD command. The NFCC will respond to this command by telling us how many NFCEEs are connected to it. Then the NFCC sends a notification command for each and every NFCEE connected. Here we implement support for sending NCI_OP_NFCEE_DISCOVER_CMD command, receiving the response and the potential notifications. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.