aboutsummaryrefslogtreecommitdiffstats
path: root/include/net/switchdev.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-08-09net: switchdev: support static FDB addressesVivien Didelot1-0/+1
This patch adds a is_static boolean to the switchdev_obj_fdb structure, in order to set the ndm_state to either NUD_NOARP or NUD_REACHABLE. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-09net: switchdev: change fdb addr for a byte arrayVivien Didelot1-1/+1
The address in the switchdev_obj_fdb structure is currently represented as a pointer. Replacing it for a 6-byte array allows switchdev to carry addresses directly read from hardware registers, not stored by the switch chip driver (as in Rocker). Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-20switchdev: add offload_fwd_mark generator helperScott Feldman1-0/+9
skb->offload_fwd_mark and dev->offload_fwd_mark are 32-bit and should be unique for device and may even be unique for a sub-set of ports within device, so add switchdev helper function to generate unique marks based on port's switch ID and group_ifindex. group_ifindex would typically be the container dev's ifindex, such as the bridge's ifindex. The generator uses a global hash table to store offload_fwd_marks hashed by {switch ID, group_ifindex} key. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23switchdev: rename vlan vid_start to vid_beginScott Feldman1-1/+1
Use vid_begin/end to be consistent with BRIDGE_VLAN_INFO_RANGE_BEGIN/END. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17switchdev: add support for fdb add/del/dump via switchdev_port_obj ops.Samudrala, Sridhar1-0/+50
- introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13switchdev: don't use anonymous union on switchdev attr/obj structsScott Feldman1-2/+2
Older gcc versions (e.g. gcc version 4.4.6) don't like anonymous unions which was causing build issues on the newly added switchdev attr/obj structs. Fix this by using named union on structs. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13switchdev: align comment with other comments in blockScott Feldman1-1/+1
Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: convert fib_ipv4_add/del over to switchdev_port_obj_add/delScott Feldman1-11/+10
The IPv4 FIB ops convert nicely to the switchdev objs and we're left with only four switchdev ops: port get/set and port add/del. Other objs will follow, such as FDB. So go ahead and convert IPv4 FIB over to switchdev obj for consistency, anticipating more objs to come. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: add new switchdev_port_bridge_getlinkScott Feldman1-0/+10
Like bridge_setlink, add switchdev wrapper to handle bridge_getlink and call into port driver to get port attrs. For now, only BR_LEARNING and BR_LEARNING_SYNC are returned. To add more, we'll probably want to break away from ndo_dflt_bridge_getlink() and build the netlink skb directly in the switchdev code. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: remove unused switchdev_port_bridge_dellinkScott Feldman1-15/+0
Now we can remove old wrappers for dellink. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: add new switchdev_port_bridge_dellinkScott Feldman1-0/+6
Same change as setlink. Provide the wrapper op for SELF ndo_bridge_dellink and call into the switchdev driver to delete afspec VLANs. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: remove old switchdev_port_bridge_setlinkScott Feldman1-9/+0
New attr-based bridge_setlink can recurse lower devs and recover on err, so remove old wrapper (including ndo_dflt_switchdev_port_bridge_setlink). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: add bridge port flags attrScott Feldman1-0/+2
rocker: use switchdev get/set attr for bridge port flags Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: add port vlan objScott Feldman1-0/+8
VLAN obj has flags (PVID and untagged) as well as start and end vid ranges. The switchdev driver can optimize programing the device using the ranges. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: introduce switchdev add/del obj opsScott Feldman1-0/+31
Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: convert STP update to switchdev attr setScott Feldman1-11/+2
STP update is just a settable port attribute, so convert switchdev_port_stp_update to an attr set. For DSA, the prepare phase is skipped and STP updates are only done in the commit phase. This is because currently the DSA drivers don't need to allocate any memory for STP updates and the STP update will not fail to HW (unless something horrible goes wrong on the MDIO bus, in which case the prepare phase wouldn't have been able to predict anyway). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: convert parent_id_get to switchdev attr getScott Feldman1-14/+4
Switch ID is just a gettable port attribute. Convert switchdev op switchdev_parent_id_get to a switchdev attr. Note: for sysfs and netlink interfaces, SWITCHDEV_ATTR_PORT_PARENT_ID is called with SWITCHDEV_F_NO_RECUSE to limit switch ID user-visiblity to only port netdevs. So when a port is stacked under bond/bridge, the user can only query switch id via the switch ports, but not via the upper devices Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: introduce get/set attrs opsScott Feldman1-0/+43
Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: s/swdev_/switchdev_/Jiri Pirko1-15/+15
Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/Jiri Pirko1-55/+56
Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20switchdev: kernel-doc cleanup on swithdev opsScott Feldman1-16/+7
Suggested-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16switchdev: add swdev opsScott Feldman1-0/+38
As discussed at netconf, introduce swdev_ops as first step to move switchdev ops from ndo to swdev. This will keep switchdev from cluttering up ndo ops space. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09switchdev: add netlink flags to IPv4 FIB add opScott Feldman1-2/+4
Pass in the netlink flags (NLM_F_*) into switchdev driver for IPv4 FIB add op to allow driver to 1) optimize hardware updates, 2) handle ip route prepend and append commands correctly. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06fib: make netdev_switch_fib_ipv4_abort in header file static inlineWillem de Bruijn1-1/+1
When building without CONFIG_NET_SWITCHDEV, netdev_switch_fib_ipv4_abort is defined in the header file. It must be static inline to avoid build failure at link time. Fixes: 8e05fd7166c6 ("fib: hook IPv4 fib for hardware offload") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06fib: hook IPv4 fib for hardware offloadScott Feldman1-0/+5
Call into the switchdev driver any time an IPv4 fib entry is added/modified/deleted from the kernel's FIB. The switchdev driver may or may not install the route to the offload device. In the case where the driver tries to install the route and something goes wrong (device's routing table is full, etc), then all of the offloaded routes will be flushed from the device, route forwarding falls back to the kernel, and no more routes are offloading. We can refine this logic later. For now, use the simplist model of offloading routes up to the point of failure, and then on failure, undo everything and mark IPv4 offloading disabled. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06switchdev: add IPv4 fib ndo ops wrappersScott Feldman1-0/+19
Add IPv4 fib ndo wrapper funcs and stub them out for now. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-01swdevice: add new apis to set and del bridge port attributesRoopa Prabhu1-1/+36
This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18switchdev: fix typo in inline function definitionJiri Pirko1-1/+1
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18net: replace br_fdb_external_learn_* calls with switchdev notifier eventsJiri Pirko1-0/+11
This patch benefits from newly introduced switchdev notifier and uses it to propagate fdb learn events from rocker driver to bridge. That avoids direct function calls and possible use by other listeners (ovs). Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18switchdev: introduce switchdev notifierJiri Pirko1-0/+31
This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-02bridge: call netdev_sw_port_stp_update when bridge port STP status changesScott Feldman1-0/+7
To notify switch driver of change in STP state of bridge port, add new .ndo op and provide switchdev wrapper func to call ndo op. Use it in bridge code then. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-02net: introduce generic switch devices supportJiri Pirko1-0/+30
The goal of this is to provide a possibility to support various switch chips. Drivers should implement relevant ndos to do so. Now there is only one ndo defined: - for getting physical switch id is in place. Note that user can use random port netdevice to access the switch. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Thomas Graf <tgraf@suug.ch> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.