aboutsummaryrefslogtreecommitdiffstats
path: root/include/net/tc_act (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2013-10-03atl1e: enable support for NETIF_F_RXALL and NETIF_F_RXCRC featuresAndrea Merello1-4/+42
This patch allows (optionally, via ethtool) the atl1e NIC to: - Receive bad frames (runt, bad-fcs, etc..) - Receive full frames without stripping the FCS. This has been tested on my board by injecting runt and bad-fcs frames with a FPGA-based device. The particular scenario of receiving very short frames (<4 bytes) without passing FCS to the upper layer has been also tested: This could be potentially dangerous because the driver performs a 4 byte subtraction on the frame length, but I finally have NOT added anything to avoid this because it seems the NIC always discards frames so much short.. If someone still have some reason to worry about this, please tell me.. I will add an explicit SW check.. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-033com: Fix drivers/net/ethernet/3com/Kconfig references to PCMCIA and 3c515Matthew Whitehead1-2/+2
The Vortex driver works with PCI and Cardbus devices, not PCMCIA. There never was an EISA 3c515 card, only ISA, so remove that option. Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03net: ipv4: Change variable type to boolPeter Senna Tschudin1-1/+1
The variable fully_acked is only assigned the values true and false. Change its type to bool. The simplified semantic patch that find this problem is as follows (http://coccinelle.lip6.fr/): @exists@ type T; identifier b; @@ - T + bool b = ...; ... when any b = \(true\|false\) Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03net: myri10ge: Change variable type to boolPeter Senna Tschudin1-2/+2
There is the rc variable on both myri10ge_ss_lock_napi and myri10ge_ss_lock_poll functions. In both cases rc is only assigned the values true and false. Both functions already return bool. Change rc type to bool. The simplified semantic patch that find this problem is as follows (http://coccinelle.lip6.fr/): @exists@ type T; identifier b; @@ - T + bool b = ...; ... when any b = \(true\|false\) Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03net: bnx2x: Change variable type to boolPeter Senna Tschudin1-1/+1
The variable rc is only assigned the values true and false. The function bnx2x_prev_is_path_marked already returns bool. Change rc type to bool. The simplified semantic patch that find this problem is as follows (http://coccinelle.lip6.fr/): @exists@ type T; identifier b; @@ - T + bool b = ...; ... when any b = \(true\|false\) Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03net: atl1c: Change variable type to boolPeter Senna Tschudin1-1/+1
The variable ret is only assigned the values true and false. The function atl1c_read_eeprom already returns bool. Change ret type to bool. The simplified semantic patch that find this problem is as follows (http://coccinelle.lip6.fr/): @exists@ type T; identifier b; @@ - T + bool b = ...; ... when any b = \(true\|false\) Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03bonding: document the new xmit policy modes and update the changed onesNikolay Aleksandrov1-30/+36
Add new documentation for encap2+3 and encap3+4, also update the formula for the old modes due to the changes. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03bonding: modify the old and add new xmit hash policiesNikolay Aleksandrov5-134/+72
This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03flow_dissector: factor out the ports extraction in skb_flow_get_portsNikolay Aleksandrov2-11/+29
Factor out the code that extracts the ports from skb_flow_dissect and add a new function skb_flow_get_ports which can be re-used. Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03inet: consolidate INET_TW_MATCHEric Dumazet7-40/+21
TCP listener refactoring, part 2 : We can use a generic lookup, sockets being in whatever state, if we are sure all relevant fields are at the same place in all socket types (ESTABLISH, TIME_WAIT, SYN_RECV) This patch removes these macros : inet_addrpair, inet_addrpair, tw_addrpair, tw_portpair And adds : sk_portpair, sk_addrpair, sk_daddr, sk_rcv_saddr Then, INET_TW_MATCH() is really the same than INET_MATCH() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02ath10k: wmi: Convert use of 6 to ETH_ALENJoe Perches1-1/+1
Use the appropriate define instead of 6. Signed-off-by: Joe Perches <joe@perches.com> Noticed-by: Julia Lawall <julia.lawall@lip6.fr> via spatch script Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02net:drivers/net: Miscellaneous conversions to ETH_ALENJoe Perches57-149/+146
Convert the memset/memcpy uses of 6 to ETH_ALEN where appropriate. Also convert some struct definitions and u8 array declarations of [6] to ETH_ALEN. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02include/linux/skbuff.h: move CONFIG_XFRM check inside the skb_sec_path()Denis Kirjanov1-5/+2
And thus we have only one function definition Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02tcp: sndbuf autotuning improvementsEric Dumazet2-14/+26
tcp_fixup_sndbuf() is underestimating initial send buffer requirements. It was not noticed because big GSO packets were escaping the limitation, but with smaller TSO packets (or TSO/GSO/SG off), application hits sk_sndbuf before having a chance to fill enough packets in socket write queue. - initial cwnd can be bigger than 10 for specific routes - SKB_TRUESIZE() is a bit under real needs in some cases, because of power-of-two rounding in kmalloc() - Fast Recovery (RFC 5681 3.2) : Cubic needs 70% factor - Extra cushion (application might react slowly to POLLOUT) tcp_v4_conn_req_fastopen() needs to call tcp_init_metrics() before calling tcp_init_buffer_space() Then we realize tcp_new_space() should call tcp_fixup_sndbuf() instead of duplicating this stuff. Rename tcp_fixup_sndbuf() to tcp_sndbuf_expand() to be more descriptive. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02fib_trie: avoid a redundant bit judgement in inflatebaker.zhang1-6/+3
Because 'node' is the i'st child of 'oldnode', thus, here 'i' equals tkey_extract_bits(node->key, oldtnode->pos, oldtnode->bits) we just get 1 more bit, and need not care the detail value of this bits. I apologize for the mistake. I generated the patch on a branch version, and did not notice the put_child has been changed. I have redone the test on HEAD version with my patch. two cases are used. case 1. inflate a node which has a leaf child node. case 2: inflate a node which has a an child node with skipped bits test env: ip link set eth0 up ip a add dev eth0 192.168.11.1/32 here, we just focus on route table(MAIN), so I use a "192.168.11.1/32" address to simplify the test case. call trace: + fib_insert_node + + trie_rebalance + + + resize + + + + inflate Test case 1: inflate a node which has a leaf child node. =========================================================== step 1. prepare a fib trie ------------------------------------------ ip r a 192.168.0.0/24 via 192.168.11.1 ip r a 192.168.1.0/24 via 192.168.11.1 we get a fib trie. root@baker:~# cat /proc/net/fib_trie Main: +-- 192.168.0.0/23 1 0 0 |-- 192.168.0.0 /24 universe UNICAST |-- 192.168.1.0 /24 universe UNICAST Local: ..... step 2. Add the third route ------------------------------------------ root@baker:~# ip r a 192.168.2.0/24 via 192.168.11.1 A fib_trie leaf will be inserted in fib_insert_node before trie_rebalance. For function 'inflate': 'inflate' is called with following trie. +-- 192.168.0.0/22 1 1 0 <=== tn node +-- 192.168.0.0/23 1 0 0 <== node a |-- 192.168.0.0 /24 universe UNICAST |-- 192.168.1.0 /24 universe UNICAST |-- 192.168.2.0 <== leaf(node b) When process node b, which is a leaf. here: i is 1, node key "192.168.2.0" oldnode is (pos:22, bits:1) unpatch source: tkey_extract_bits(node->key, oldtnode->pos + oldtnode->bits, 1) it equals: tkey_extract_bits("192.168,2,0", 22 + 1, 1) thus got 0, and call put_child(tn, 2*i, node); <== 2*i=2. patched source: tkey_extract_bits(node->key, oldtnode->pos, oldtnode->bits + 1), tkey_extract_bits("192.168,2,0", 22, 1 + 1) <== get 2. Test case 2: inflate a node which has a an child node with skipped bits ========================================================================== step 1. prepare a fib trie. ip link set eth0 up ip a add dev eth0 192.168.11.1/32 ip r a 192.168.128.0/24 via 192.168.11.1 ip r a 192.168.0.0/24 via 192.168.11.1 ip r a 192.168.16.0/24 via 192.168.11.1 ip r a 192.168.32.0/24 via 192.168.11.1 ip r a 192.168.48.0/24 via 192.168.11.1 ip r a 192.168.144.0/24 via 192.168.11.1 ip r a 192.168.160.0/24 via 192.168.11.1 ip r a 192.168.176.0/24 via 192.168.11.1 check: root@baker:~# cat /proc/net/fib_trie Main: +-- 192.168.0.0/16 1 0 0 +-- 192.168.0.0/18 2 0 0 |-- 192.168.0.0 /24 universe UNICAST |-- 192.168.16.0 /24 universe UNICAST |-- 192.168.32.0 /24 universe UNICAST |-- 192.168.48.0 /24 universe UNICAST +-- 192.168.128.0/18 2 0 0 |-- 192.168.128.0 /24 universe UNICAST |-- 192.168.144.0 /24 universe UNICAST |-- 192.168.160.0 /24 universe UNICAST |-- 192.168.176.0 /24 universe UNICAST Local: ... step 2. add a route to trigger inflate. ip r a 192.168.96.0/24 via 192.168.11.1 This command will call serveral times inflate. In the first time, the fib_trie is: ________________________ +-- 192.168.128.0/(16, 1) <== tn node +-- 192.168.0.0/(17, 1) <== node a +-- 192.168.0.0/(18, 2) |-- 192.168.0.0 |-- 192.168.16.0 |-- 192.168.32.0 |-- 192.168.48.0 |-- 192.168.96.0 +-- 192.168.128.0/(18, 2) <== node b. |-- 192.168.128.0 |-- 192.168.144.0 |-- 192.168.160.0 |-- 192.168.176.0 NOTE: node b is a interal node with skipped bits. here, i:1, node->key "192.168.128.0", oldnode:(pos:16, bits:1) so tkey_extract_bits(node->key, oldtnode->pos + oldtnode->bits, 1) it equals: tkey_extract_bits("192.168,128,0", 16 + 1, 1) <=== 0 tkey_extract_bits(node->key, oldtnode->pos, oldtnode->bits, 1) it equals: tkey_extract_bits("192.168,128,0", 16, 1+1) <=== 2 2*i + 0 == 2, so the result is same. Signed-off-by: baker.zhang <baker.kernel@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02isdn: eicon: free pointer after using it in log msg in divas_um_idi_delete_entity()Jesper Juhl1-1/+1
Not really a problem, but nice IMHO; the Coverity static analyzer complains that we use the pointer 'e' after it has been freed, so move the freeing below the final use, even if that use is just using the value of the pointer and not actually dereferencing it. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02xen-netfront: convert to GRO APIWei Liu1-1/+3
Anirban was seeing netfront received MTU size packets, which downgraded throughput. The following patch makes netfront use GRO API which improves throughput for that case. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Cc: Anirban Chakraborty <abchak@juniper.net> Cc: Ian Campbell <ian.campbell@citrix.com> Acked-by: Konrad Wilk <konrad.wilk@oracle.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02tg3: use phylib when robo switch is in useHauke Mehrtens1-1/+10
When a switch is connected as a PHY to the MAC driven by tg3, use phylib and provide the phy address to tg3 from the sprom. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02ssb: provide phy address for Gigabit Ethernet driverHauke Mehrtens1-0/+14
Add a function to provide the phy address which should be used to the Gigabit Ethernet driver connected to ssb. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02tg3: add support a phy at an address different than 01Hauke Mehrtens1-19/+19
When phylib was in use tg3 only searched at address 01 on the mdio bus and did not work with any other address. On the BCM4705 SoCs the switch is connected as a PHY behind the MAC driven by tg3 and it is at PHY address 30 in most cases. This is a preparation patch to allow support for such switches. phy_addr is set to TG3_PHY_MII_ADDR for all devices, which are using phylib, so this should not change any behavior. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01fs/super.c: fix lru_list leak for realAl Viro1-2/+2
Freeing ->s_{inode,dentry}_lru in deactivate_locked_super() is wrong; the right place is destroy_super(). As it is, we leak them if sget() decides that new superblock it has allocated (and never shown to anybody) isn't needed and should be freed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-01pkt_sched: fq: rate limiting improvementsEric Dumazet1-19/+26
FQ rate limiting suffers from two problems, reported by Steinar : 1) FQ enforces a delay when flow quantum is exhausted in order to reduce cpu overhead. But if packets are small, current delay computation is slightly wrong, and observed rates can be too high. Steinar had this problem because he disabled TSO and GSO, and default FQ quantum is 2*1514. (Of course, I wish recent TSO auto sizing changes will help to not having to disable TSO in the first place) 2) maxrate was not used for forwarded flows (skbs not attached to a socket) Tested: tc qdisc add dev eth0 root est 1sec 4sec fq maxrate 8Mbit netperf -H lpq84 -l 1000 & sleep 10 ; tc -s qdisc show dev eth0 qdisc fq 8003: root refcnt 32 limit 10000p flow_limit 100p buckets 1024 quantum 3028 initial_quantum 15140 maxrate 8000Kbit Sent 16819357 bytes 11258 pkt (dropped 0, overlimits 0 requeues 0) rate 7831Kbit 653pps backlog 7570b 5p requeues 0 44 flows (43 inactive, 1 throttled), next packet delay 2977352 ns 0 gc, 0 highprio, 5545 throttled lpq83:~# tcpdump -p -i eth0 host lpq84 -c 12 09:02:52.079484 IP lpq83 > lpq84: . 1389536928:1389538376(1448) ack 3808678021 win 457 <nop,nop,timestamp 961812 572609068> 09:02:52.079499 IP lpq83 > lpq84: . 1448:2896(1448) ack 1 win 457 <nop,nop,timestamp 961812 572609068> 09:02:52.079906 IP lpq84 > lpq83: . ack 2896 win 16384 <nop,nop,timestamp 572609080 961812> 09:02:52.082568 IP lpq83 > lpq84: . 2896:4344(1448) ack 1 win 457 <nop,nop,timestamp 961815 572609071> 09:02:52.082581 IP lpq83 > lpq84: . 4344:5792(1448) ack 1 win 457 <nop,nop,timestamp 961815 572609071> 09:02:52.083017 IP lpq84 > lpq83: . ack 5792 win 16384 <nop,nop,timestamp 572609083 961815> 09:02:52.085678 IP lpq83 > lpq84: . 5792:7240(1448) ack 1 win 457 <nop,nop,timestamp 961818 572609074> 09:02:52.085693 IP lpq83 > lpq84: . 7240:8688(1448) ack 1 win 457 <nop,nop,timestamp 961818 572609074> 09:02:52.086117 IP lpq84 > lpq83: . ack 8688 win 16384 <nop,nop,timestamp 572609086 961818> 09:02:52.088792 IP lpq83 > lpq84: . 8688:10136(1448) ack 1 win 457 <nop,nop,timestamp 961821 572609077> 09:02:52.088806 IP lpq83 > lpq84: . 10136:11584(1448) ack 1 win 457 <nop,nop,timestamp 961821 572609077> 09:02:52.089217 IP lpq84 > lpq83: . ack 11584 win 16384 <nop,nop,timestamp 572609090 961821> Reported-by: Steinar H. Gunderson <sesse@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01ip6tnl: allow to use rtnl ops on fb tunnelNicolas Dichtel1-2/+1
rtnl ops where introduced by c075b13098b3 ("ip6tnl: advertise tunnel param via rtnl"), but I forget to assign rtnl ops to fb tunnels. Now that it is done, we must remove the explicit call to unregister_netdevice_queue(), because the fallback tunnel is added to the queue in ip6_tnl_destroy_tunnels() when checking rtnl_link_ops of all netdevices (this is valid since commit 0bd8762824e7 ("ip6tnl: add x-netns support")). Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01sit: allow to use rtnl ops on fb tunnelNicolas Dichtel1-1/+1
rtnl ops where introduced by ba3e3f50a0e5 ("sit: advertise tunnel param via rtnl"), but I forget to assign rtnl ops to fb tunnels. Now that it is done, we must remove the explicit call to unregister_netdevice_queue(), because the fallback tunnel is added to the queue in sit_destroy_tunnels() when checking rtnl_link_ops of all netdevices (this is valid since commit 5e6700b3bf98 ("sit: add support of x-netns")). Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01igb: Add ethtool support to configure number of channelsLaura Mihaela Vasilescu3-0/+107
This patch adds the ethtool callbacks necessary to configure the number of RSS queues. The maximum number of queues is in accordance with the datasheets. Signed-off-by: Laura Mihaela Vasilescu <laura.vasilescu@rosedu.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01igb: Add ethtool offline tests for i354Fujinaka, Todd1-2/+4
Add the ethtool offline tests for i354 devices. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01ixgbe: remove marketing names from busy poll codeJacob Keller3-23/+23
This patch renames the LL_EXTENDED_STATS and some of the functions required to implement busy polling in the ixgbe driver, in order to remove the marketing "low latency" blurb which hides what the code actually does. This furthers work which was requested by Linus Torvalds when the initial busy poll code was included in the kernel. The code in the ixgbe driver itself was never properly renamed to reflect the change to busy polling as the title. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01ixgbe: Cleanup the use of tabs and spacesJeff Kirsher2-26/+26
Cleans up the whitespace issues noticed during code review where a mix of tabs and spaces were used for indentation. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01ixgbe: ethtool DCB registers dump for 82599 and x540Leonardo Potenza2-15/+65
Added support for DCB registers dump using ethtool -d option both for 82599 and x540 ethernet controllers Signed-off-by: Leonardo Potenza <leonardo.potenza@intel.com> Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01ixgbevf: move API neg to reset pathDon Skidmore1-11/+10
After this patch the API negotiation will occur in the reset path. So now the PF will be informed of the API version earlier. This will also require the mailbox lock to be initialize sooner as well. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01ixgbevf: add wait for Rx queue disableDon Skidmore1-17/+44
New function was added to wait for Rx queues to be disabled before disabling NAPI. This function also allows us to modify ixgbevf_rx_desc_queue_enable() to better match ixgbe. I also cleaned up some msleep calls to usleep_range while I was in this code anyway. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01ixgbevf: cleanup redundant mailbox read failure checkDon Skidmore1-27/+2
Since we are already checking for read failure in check_link we don't need to do it here. Instead just make sure the watchdog task gets scheduled, if we are up, and it can be done there. This will better follow igbvf method of handling a mailbox event and message timeout. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01ixgbevf: do not print registers to dmesg in ixgbevf_get_regsJacob Keller1-53/+2
This patch removes the use of hw_dbg in ixgbevf when the ixgbe_get_regs function is called from ethtool. This goes along side a patch to ethtool which enables proper support for ixgbevf pretty-printing of registers. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01be2net: add a counter for pkts dropped in xmit pathSathya Perla3-2/+8
In the xmit path, the driver may drop some pkts due to reasons such as DMA mapping errors, out of memory conditions or to protect HW from unrecoverable errors. Add a counter in TX-stats for such drops. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01be2net: fix adaptive interrupt coalescingSathya Perla5-73/+115
The current EQ delay calculation for AIC is based only on RX packet rate. This fails to be effective when there's only TX and no RX. This patch inclues: - Calculating EQ-delay based on both RX and TX pps. - Modifying EQ-delay of all EQs via one cmd, instead of issuing a separate cmd for each EQ. - A new structure to store interrupt coalescing parameters, in a separate cache-line from the EQ-obj. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01be2net: call ENABLE_VF cmd for Skyhawk-R tooVasundhara Volam2-2/+3
This cmd needs to be sent to FW when enabling VFs (currently used only for Lancer.) Also, avoid calling the cmd when driver loads and finds that VFs are already enabled from a previous load. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01be2net: Create single TXQ on BE3-R 1G portsVasundhara Volam1-9/+2
On BE3-R 1G ports (identified by port numbers 2 and 3) the FW cannot properly support multiple TXQs. This also makes the number of RX and TX queues symmetric as only a single RXQ is available on 1G ports. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01be2net: pass if_id for v1 and V2 versions of TX_CREATE cmdVasundhara Volam1-1/+2
It is a required field for all TX_CREATE cmd versions > 0. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01be2net: Call be_vf_setup() even when VFs are enbaled from previous loadVasundhara Volam2-5/+5
Re-define the sriov_want() macro to check for number of VFs that need to be enabled in the current load of the driver or the number of VFs that still remain enabled from the previous load (attached VFs cannot be disabled.) Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01ip_tunnel: Remove double unregister of the fallback deviceSteffen Klassert1-2/+0
When queueing the netdevices for removal, we queue the fallback device twice in ip_tunnel_destroy(). The first time when we queue all netdevices in the namespace and then again explicitly. Fix this by removing the explicit queueing of the fallback device. Bug was introduced when network namespace support was added with commit 6c742e714d8 ("ipip: add x-netns support"). Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01ip_tunnel_core: Change __skb_push back to skb_pushSteffen Klassert1-1/+1
Git commit 0e6fbc5b ("ip_tunnels: extend iptunnel_xmit()") moved the IP header installation to iptunnel_xmit() and changed skb_push() to __skb_push(). This makes possible bugs hard to track down, so change it back to skb_push(). Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01ip_tunnel: Add fallback tunnels to the hash listsSteffen Klassert1-1/+3
Currently we can not update the tunnel parameters of the fallback tunnels because we don't find them in the hash lists. Fix this by adding them on initialization. Bug was introduced with commit c544193214 ("GRE: Refactor GRE tunneling code.") Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01ip_tunnel: Fix a memory corruption in ip_tunnel_xmitSteffen Klassert1-6/+6
We might extend the used aera of a skb beyond the total headroom when we install the ipip header. Fix this by calling skb_cow_head() unconditionally. Bug was introduced with commit c544193214 ("GRE: Refactor GRE tunneling code.") Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01qlcnic: Fix SR-IOV configurationManish Chopra1-1/+7
o Interface needs to be brought down and up while configuring SR-IOV. Protect interface up/down using rtnl_lock()/rtnl_unlock() Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01ll_temac: Reset dma descriptors indexes on ndo_openRicardo Ribalda1-0/+6
The dma descriptors indexes are only initialized on the probe function. If a packet is on the buffer when temac_stop is called, the dma descriptors indexes can be left on a incorrect state where no other package can be sent. So an interface could be left in an usable state after ifdow/ifup. This patch makes sure that the descriptors indexes are in a proper status when the device is open. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01net: can: c_can_platform: Remove redundant of_match_ptrSachin Kamat1-1/+1
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: linux-can@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01net: ethernet: cpsw-phy-sel: Remove redundant of_match_ptrSachin Kamat1-1/+1
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01net: ethernet: cpsw: Remove redundant of_match_ptrSachin Kamat1-1/+1
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-30skbuff: size of hole is wrong in a commentNicolas Dichtel1-1/+1
Since commit c93bdd0e03e8 ("netvm: allow skb allocation to use PFMEMALLOC reserves"), hole size is one bit less than what is written in the comment. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-30ipv6 mcast: use in6_dev_put in timer handlers instead of __in6_dev_putSalam Noureddine1-3/+3
It is possible for the timer handlers to run after the call to ipv6_mc_down so use in6_dev_put instead of __in6_dev_put in the handler function in order to do proper cleanup when the refcnt reaches 0. Otherwise, the refcnt can reach zero without the inet6_dev being destroyed and we end up leaking a reference to the net_device and see messages like the following, unregister_netdevice: waiting for eth0 to become free. Usage count = 1 Tested on linux-3.4.43. Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.