aboutsummaryrefslogtreecommitdiffstats
path: root/include/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-08-31ip-tunnel: Use API to access tunnel metadata options.Pravin B Shelar2-53/+45
Currently tun-info options pointer is used in few cases to pass options around. But tunnel options can be accessed using ip_tunnel_info_opts() API without using the pointer. Following patch removes the redundant pointer and consistently make use of API. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-30net: Introduce helper functions to get the per cpu dataRaghavendra K T1-0/+10
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29vxlan: do not receive IPv4 packets on IPv6 socketJiri Benc1-1/+2
By default (subject to the sysctl settings), IPv6 sockets listen also for IPv4 traffic. Vxlan is not prepared for that and expects IPv6 header in packets received through an IPv6 socket. In addition, it's currently not possible to have both IPv4 and IPv6 vxlan tunnel on the same port (unless bindv6only sysctl is enabled), as it's not possible to create and bind both IPv4 and IPv6 vxlan interfaces and there's no way to specify both IPv4 and IPv6 remote/group IP addresses. Set IPV6_V6ONLY on vxlan sockets to fix both of these issues. This is not done globally in udp_tunnel, as l2tp and tipc seems to work okay when receiving IPv4 packets on IPv6 socket and people may rely on this behavior. The other tunnels (geneve and fou) do not support IPv6. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29ip_tunnels: record IP version in tunnel infoJiri Benc2-0/+11
There's currently nothing preventing directing packets with IPv6 encapsulation data to IPv4 tunnels (and vice versa). If this happens, IPv6 addresses are incorrectly interpreted as IPv4 ones. Track whether the given ip_tunnel_key contains IPv4 or IPv6 data. Store this in ip_tunnel_info. Reject packets at appropriate places if they are supposed to be encapsulated into an incompatible protocol. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29ip_tunnels: convert the mode field of ip_tunnel_info to flagsJiri Benc2-8/+2
The mode field holds a single bit of information only (whether the ip_tunnel_info struct is for rx or tx). Change the mode field to bit flags. This allows more mode flags to be added. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller1-8/+15
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree. In sum, patches to address fallout from the previous round plus updates from the IPVS folks via Simon Horman, they are: 1) Add a new scheduler to IPVS: The weighted overflow scheduling algorithm directs network connections to the server with the highest weight that is currently available and overflows to the next when active connections exceed the node's weight. From Raducu Deaconu. 2) Fix locking ordering in IPVS, always take rtnl_lock in first place. Patch from Julian Anastasov. 3) Allow to indicate the MTU to the IPVS in-kernel state sync daemon. From Julian Anastasov. 4) Enhance multicast configuration for the IPVS state sync daemon. Also from Julian. 5) Resolve sparse warnings in the nf_dup modules. 6) Fix a linking problem when CONFIG_NF_DUP_IPV6 is not set. 7) Add ICMP codes 5 and 6 to IPv6 REJECT target, they are more informative subsets of code 1. From Andreas Herz. 8) Revert the jumpstack size calculation from mark_source_chains due to chain depth miscalculations, from Florian Westphal. 9) Calm down more sparse warning around the Netfilter tree, again from Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add support for VRFs to inetpeer cacheDavid Ahern1-5/+12
inetpeer caches based on address only, so duplicate IP addresses within a namespace return the same cached entry. Enhance the ipv4 address key to contain both the IPv4 address and VRF device index. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Refactor inetpeer address structDavid Ahern1-16/+19
Move the inetpeer_addr_base union to inetpeer_addr and drop inetpeer_addr_base. Both the a6 and in6_addr overlays are not needed; drop the __be32 version and rename in6 to a6 for consistency with ipv4. Add a new u32 array to the union which removes the need for the typecast in the compare function and the use of a consistent arg for both ipv4 and ipv6 addresses which makes the compare function more readable. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add helper function to compare inetpeer addressesDavid Ahern1-0/+16
tcp_metrics and inetpeer both have functions to compare inetpeer addresses. Consolidate into 1 version. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add set,get helpers for inetpeer addressesDavid Ahern1-0/+23
Use inetpeer set,get helpers in tcp_metrics rather than peeking into the inetpeer_addr struct. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Introduce ipv4_addr_hash and use it for tcp metricsDavid Ahern1-0/+5
Refactors a common line into helper function. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net: sched: register noqueue qdiscPhil Sutter1-0/+1
This way users can attach noqueue just like any other qdisc using tc without having to mess with tx_queue_len first. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27geneve: Consolidate Geneve functionality in single module.Pravin B Shelar1-34/+0
geneve_core module handles send and receive functionality. This way OVS could use the Geneve API. Now with use of tunnel meatadata mode OVS can directly use Geneve netdevice. So there is no need for separate module for Geneve. Following patch consolidates Geneve protocol processing in single module. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27geneve: Add support to collect tunnel metadata.Pravin B Shelar1-0/+3
Following patch create new tunnel flag which enable tunnel metadata collection on given device. These devices can be used by tunnel metadata based routing or by OVS. Geneve Consolidation patch get rid of collect_md_tun to simplify tunnel lookup further. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27tunnel: introduce udp_tun_rx_dst()Pravin B Shelar2-0/+65
Introduce function udp_tun_rx_dst() to initialize tunnel dst on receive path. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net: sched: consolidate tc_classify{,_compat}Daniel Borkmann1-3/+1
For classifiers getting invoked via tc_classify(), we always need an extra function call into tc_classify_compat(), as both are being exported as symbols and tc_classify() itself doesn't do much except handling of reclassifications when tp->classify() returned with TC_ACT_RECLASSIFY. CBQ and ATM are the only qdiscs that directly call into tc_classify_compat(), all others use tc_classify(). When tc actions are being configured out in the kernel, tc_classify() effectively does nothing besides delegating. We could spare this layer and consolidate both functions. pktgen on single CPU constantly pushing skbs directly into the netif_receive_skb() path with a dummy classifier on ingress qdisc attached, improves slightly from 22.3Mpps to 23.1Mpps. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27netfilter: connlabels: Export setting connlabel lengthJoe Stringer1-0/+4
Add functions to change connlabel length into nf_conntrack_labels.c so they may be reused by other modules like OVS and nftables without needing to jump through xt_match_check() hoops. Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Florian Westphal <fw@strlen.de> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27dst: Add __skb_dst_copy() variationJoe Stringer1-2/+7
This variation on skb_dst_copy() doesn't require two skbs. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-26net_sched: act_bpf: remove spinlock in fast pathAlexei Starovoitov1-1/+1
Similar to act_gact/act_mirred, act_bpf can be lockless in packet processing with extra care taken to free bpf programs after rcu grace period. Replacement of existing act_bpf (very rare) is done with synchronize_rcu() and final destruction is done from tc_action_ops->cleanup() callback that is called from tcf_exts_destroy()->tcf_action_destroy()->__tcf_hash_release() when bind and refcnt reach zero which is only possible when classifier is destroyed. Previous two patches fixed the last two classifiers (tcindex and rsvp) to call tcf_exts_destroy() from rcu callback. Similar to gact/mirred there is a race between prog->filter and prog->tcf_action. Meaning that the program being replaced may use previous default action if it happened to return TC_ACT_UNSPEC. act_mirred race betwen tcf_action and tcfm_dev is similar. In all cases the race is harmless. Long term we may want to improve the situation by replacing the whole tc_action->priv as single pointer instead of updating inner fields one by one. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-26net_sched: make tcf_hash_destroy() staticAlexei Starovoitov1-1/+0
tcf_hash_destroy() used once. Make it static. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25vxlan: fix multiple inclusion of vxlan.hJiri Benc1-1/+2
The vxlan_get_sk_family inline function was added after the last #endif, making multiple inclusion of net/vxlan.h fail. Move it to the proper place. Reported-by: Mark Rustad <mark.d.rustad@intel.com> Fixes: 705cc62f6728c ("vxlan: provide access function for vxlan socket address family") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25inetpeer: remove dead codeDavid Ahern1-67/+0
Remove various inlined functions not referenced in the kernel. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25tcp: refine pacing rate determinationEric Dumazet1-0/+2
When TCP pacing was added back in linux-3.12, we chose to apply a fixed ratio of 200 % against current rate, to allow probing for optimal throughput even during slow start phase, where cwnd can be doubled every other gRTT. At Google, we found it was better applying a different ratio while in Congestion Avoidance phase. This ratio was set to 120 %. We've used the normal tcp_in_slow_start() helper for a while, then tuned the condition to select the conservative ratio as soon as cwnd >= ssthresh/2 : - After cwnd reduction, it is safer to ramp up more slowly, as we approach optimal cwnd. - Initial ramp up (ssthresh == INFINITY) still allows doubling cwnd every other RTT. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25tcp: fix slow start after idle vs TSO/GSOEric Dumazet1-0/+13
slow start after idle might reduce cwnd, but we perform this after first packet was cooked and sent. With TSO/GSO, it means that we might send a full TSO packet even if cwnd should have been reduced to IW10. Moving the SSAI check in skb_entail() makes sense, because we slightly reduce number of times this check is done, especially for large send() and TCP Small queue callbacks from softirq context. As Neal pointed out, we also need to perform the check if/when receive window opens. Tested: Following packetdrill test demonstrates the problem // Test of slow start after idle `sysctl -q net.ipv4.tcp_slow_start_after_idle=1` 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 65535 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 6> +.100 < . 1:1(0) ack 1 win 511 +0 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_SOCKET, SO_SNDBUF, [200000], 4) = 0 +0 write(4, ..., 26000) = 26000 +0 > . 1:5001(5000) ack 1 +0 > . 5001:10001(5000) ack 1 +0 %{ assert tcpi_snd_cwnd == 10 }% +.100 < . 1:1(0) ack 10001 win 511 +0 %{ assert tcpi_snd_cwnd == 20, tcpi_snd_cwnd }% +0 > . 10001:20001(10000) ack 1 +0 > P. 20001:26001(6000) ack 1 +.100 < . 1:1(0) ack 26001 win 511 +0 %{ assert tcpi_snd_cwnd == 36, tcpi_snd_cwnd }% +4 write(4, ..., 20000) = 20000 // If slow start after idle works properly, we should send 5 MSS here (cwnd/2) +0 > . 26001:31001(5000) ack 1 +0 %{ assert tcpi_snd_cwnd == 10, tcpi_snd_cwnd }% +0 > . 31001:36001(5000) ack 1 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24lwt: Add cfg argument to build_stateTom Herbert1-0/+3
Add cfg and family arguments to lwt build state functions. cfg is a void pointer and will either be a pointer to a fib_config or fib6_config structure. The family parameter indicates which one (either AF_INET or AF_INET6). LWT encpasulation implementation may use the fib configuration to build the LWT state. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-23Merge tag 'nfc-next-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-nextDavid S. Miller2-0/+44
Samuel Ortiz says: ==================== NFC 4.3 pull request This is the NFC pull request for 4.3. With this one we have: - A new driver for Samsung's S3FWRN5 NFC chipset. In order to properly support this driver, a few NCI core routines needed to be exported. Future drivers like Intel's Fields Peak will benefit from this. - SPI support as a physical transport for STM st21nfcb. - An additional netlink API for sending replies back to userspace from vendor commands. - 2 small fixes for TI's trf7970a - A few st-nci fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-23route: fix breakage after moving lwtunnel stateJiri Benc1-2/+5
__recnt and related fields need to be in its own cacheline for performance reasons. Commit 61adedf3e3f1 ("route: move lwtunnel state to dst_entry") broke that on 32bit archs, causing BUILD_BUG_ON in dst_hold to be triggered. This patch fixes the breakage by moving the lwtunnel state to the end of dst_entry on 32bit archs. Unfortunately, this makes it share the cacheline with __refcnt and may affect performance, thus further patches may be needed. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 61adedf3e3f1 ("route: move lwtunnel state to dst_entry") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-23vxlan: GRO support at tunnel layerTom Herbert1-0/+1
Add calls to gro_cells infrastructure to do GRO when receiving on a tunnel. Testing: Ran 200 netperf TCP_STREAM instance - With fix (GRO enabled on VXLAN interface) Verify GRO is happening. 9084 MBps tput 3.44% CPU utilization - Without fix (GRO disabled on VXLAN interface) Verified no GRO is happening. 9084 MBps tput 5.54% CPU utilization Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21ipvs: add more mcast parameters for the sync daemonJulian Anastasov1-0/+4
- mcast_group: configure the multicast address, now IPv6 is supported too - mcast_port: configure the multicast port - mcast_ttl: configure the multicast TTL/HOP_LIMIT Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2015-08-21ipvs: add sync_maxlen parameter for the sync daemonJulian Anastasov1-8/+11
Allow setups with large MTU to send large sync packets by adding sync_maxlen parameter. The default value is now based on MTU but no more than 1500 for compatibility reasons. To avoid problems if MTU changes allow fragmentation by sending packets with DF=0. Problem reported by Dan Carpenter. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2015-08-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller8-15/+134
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next This is second pull request includes the conflict resolution patch that resulted from the updates that we got for the conntrack template through kmalloc. No changes with regards to the previously sent 15 patches. The following patchset contains Netfilter updates for your net-next tree, they are: 1) Rework the existing nf_tables counter expression to make it per-cpu. 2) Prepare and factor out common packet duplication code from the TEE target so it can be reused from the new dup expression. 3) Add the new dup expression for the nf_tables IPv4 and IPv6 families. 4) Convert the nf_tables limit expression to use a token-based approach with 64-bits precision. 5) Enhance the nf_tables limit expression to support limiting at packet byte. This comes after several preparation patches. 6) Add a burst parameter to indicate the amount of packets or bytes that can exceed the limiting. 7) Add netns support to nfacct, from Andreas Schultz. 8) Pass the nf_conn_zone structure instead of the zone ID in nf_tables to allow accessing more zone specific information, from Daniel Borkmann. 9) Allow to define zone per-direction to support netns containers with overlapping network addressing, also from Daniel. 10) Extend the CT target to allow setting the zone based on the skb->mark as a way to support simple mappings from iptables, also from Daniel. 11) Make the nf_tables payload expression aware of the fact that VLAN offload may have removed a vlan header, from Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextPablo Neira Ayuso18-136/+380
Resolve conflicts with conntrack template fixes. Conflicts: net/netfilter/nf_conntrack_core.c net/netfilter/nf_synproxy_core.c net/netfilter/xt_CT.c Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-08-20ipv6: route: extend flow representation with tunnel keyJiri Benc1-0/+1
Use flowi_tunnel in flowi6 similarly to what is done with IPv4. This complements commit 1b7179d3adff ("route: Extend flow representation with tunnel key"). Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20vxlan: provide access function for vxlan socket address familyJiri Benc1-0/+5
Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20ipv6: ndisc: inherit metadata dst when creating ndisc requestsJiri Benc1-1/+2
If output device wants to see the dst, inherit the dst of the original skb in the ndisc request. This is an IPv6 counterpart of commit 0accfc268f4d ("arp: Inherit metadata dst when creating ARP requests"). Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20route: move lwtunnel state to dst_entryJiri Benc5-25/+7
Currently, the lwtunnel state resides in per-protocol data. This is a problem if we encapsulate ipv6 traffic in an ipv4 tunnel (or vice versa). The xmit function of the tunnel does not know whether the packet has been routed to it by ipv4 or ipv6, yet it needs the lwtstate data. Moving the lwtstate data to dst_entry makes such inter-protocol tunneling possible. As a bonus, this brings a nice diffstat. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20ip_tunnels: use tos and ttl fields also for IPv6Jiri Benc1-4/+4
Rename the ipv4_tos and ipv4_ttl fields to just 'tos' and 'ttl', as they'll be used with IPv6 tunnels, too. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20ip_tunnels: add IPv6 addresses to ip_tunnel_keyJiri Benc1-4/+20
Add the IPv6 addresses as an union with IPv4 ones. When using IPv4, the newly introduced padding after the IPv4 addresses needs to be zeroed out. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20ip_tunnels: use offsetofendJiri Benc1-3/+1
Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20ip_tunnels: use u8/u16/u32Jiri Benc1-8/+8
The ip_tunnels.h include file uses mixture of __u16 and u16 (etc.) types. Unify it to the non-underscore variants. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20ip_tunnels: remove custom alignment and packingJiri Benc1-1/+1
The custom alignment of struct ip_tunnel_key is unnecessary. In struct sw_flow_key, it starts at offset 256, in struct ip_tunnel_info it's the first field. The structure is also packed even without the __packed keyword. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20nfc: netlink: Add capability to reply to vendor_cmd with dataChristophe Ricard1-0/+41
A proprietary vendor command may send back useful data to the user application. For example, the field level applied on the NFC router antenna. Still based on net/wireless/nl80211.c implementation, add nfc_vendor_cmd_alloc_reply_skb and nfc_vendor_cmd_reply in order to send back over netlink data generated by a proprietary command. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20NFC: nci: export nci_core_reset and nci_core_initRobert Baldyga1-0/+2
Some drivers needs to have ability to reinit NCI core, for example after updating firmware in setup() of post_setup() callback. This patch makes nci_core_reset() and nci_core_init() functions public, to make it possible. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20NFC: nci: Add post_setup handlerRobert Baldyga1-0/+1
Some drivers require non-standard configuration after NCI_CORE_INIT request, because they need to know ndev->manufact_specific_info or ndev->manufact_id. This patch adds post_setup handler allowing to do such custom configuration. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-19vrf: vrf_master_ifindex_rcu is not always called with rcu read lockNikolay Aleksandrov1-2/+18
While running net-next I hit this: [ 634.073119] =============================== [ 634.073150] [ INFO: suspicious RCU usage. ] [ 634.073182] 4.2.0-rc6+ #45 Not tainted [ 634.073213] ------------------------------- [ 634.073244] include/net/vrf.h:38 suspicious rcu_dereference_check() usage! [ 634.073274] other info that might help us debug this: [ 634.073307] rcu_scheduler_active = 1, debug_locks = 1 [ 634.073338] 2 locks held by swapper/0/0: [ 634.073369] #0: (((&n->timer))){+.-...}, at: [<ffffffff8112bc35>] call_timer_fn+0x5/0x480 [ 634.073412] #1: (slock-AF_INET){+.-...}, at: [<ffffffff8174f0f5>] icmp_send+0x155/0x5f0 [ 634.073450] stack backtrace: [ 634.073483] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc6+ #45 [ 634.073514] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 634.073545] 0000000000000000 0593ba8242d9ace4 ffff88002fc03b48 ffffffff81803f1b [ 634.073612] 0000000000000000 ffffffff81e12500 ffff88002fc03b78 ffffffff811003c5 [ 634.073642] 0000000000000000 ffff88002ec4e600 ffffffff81f00f80 ffff88002fc03cf0 [ 634.073669] Call Trace: [ 634.073694] <IRQ> [<ffffffff81803f1b>] dump_stack+0x4c/0x65 [ 634.073728] [<ffffffff811003c5>] lockdep_rcu_suspicious+0xc5/0x100 [ 634.073763] [<ffffffff8174eb56>] icmp_route_lookup+0x176/0x5c0 [ 634.073793] [<ffffffff8174f2fb>] ? icmp_send+0x35b/0x5f0 [ 634.073818] [<ffffffff8174f274>] ? icmp_send+0x2d4/0x5f0 [ 634.073844] [<ffffffff8174f3ce>] icmp_send+0x42e/0x5f0 [ 634.073873] [<ffffffff8170b662>] ipv4_link_failure+0x22/0xa0 [ 634.073899] [<ffffffff8174bdda>] arp_error_report+0x3a/0x80 [ 634.073926] [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0 [ 634.073952] [<ffffffff816d396e>] neigh_invalidate+0x8e/0x110 [ 634.073984] [<ffffffff816d62ae>] neigh_timer_handler+0x1ae/0x290 [ 634.074013] [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0 [ 634.074013] [<ffffffff8112bce3>] call_timer_fn+0xb3/0x480 [ 634.074013] [<ffffffff8112bc35>] ? call_timer_fn+0x5/0x480 [ 634.074013] [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0 [ 634.074013] [<ffffffff8112c2bc>] run_timer_softirq+0x20c/0x430 [ 634.074013] [<ffffffff810af50e>] __do_softirq+0xde/0x630 [ 634.074013] [<ffffffff810afc97>] irq_exit+0x117/0x120 [ 634.074013] [<ffffffff81810976>] smp_apic_timer_interrupt+0x46/0x60 [ 634.074013] [<ffffffff8180e950>] apic_timer_interrupt+0x70/0x80 [ 634.074013] <EOI> [<ffffffff8106b9d6>] ? native_safe_halt+0x6/0x10 [ 634.074013] [<ffffffff81101d8d>] ? trace_hardirqs_on+0xd/0x10 [ 634.074013] [<ffffffff81027d43>] default_idle+0x23/0x200 [ 634.074013] [<ffffffff8102852f>] arch_cpu_idle+0xf/0x20 [ 634.074013] [<ffffffff810f89ba>] default_idle_call+0x2a/0x40 [ 634.074013] [<ffffffff810f8dcc>] cpu_startup_entry+0x39c/0x4c0 [ 634.074013] [<ffffffff817f9cad>] rest_init+0x13d/0x150 [ 634.074013] [<ffffffff81f69038>] start_kernel+0x4a8/0x4c9 [ 634.074013] [<ffffffff81f68120>] ? early_idt_handler_array+0x120/0x120 [ 634.074013] [<ffffffff81f68339>] x86_64_start_reservations+0x2a/0x2c [ 634.074013] [<ffffffff81f68485>] x86_64_start_kernel+0x14a/0x16d It would seem vrf_master_ifindex_rcu() can be called without RCU held in other contexts as well so introduce a new helper which acquires rcu and returns the ifindex. Also add curly braces around both the "if" and "else" parts as per the style guide. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-19lwtunnel: Fix the sparse warnings in fib_encap_matchYing Xue1-0/+4
When CONFIG_LWTUNNEL config is not enabled, the lwtstate_free() is not declared in lwtunnel.h at all. However, even in this case, the function is still referenced in fib_semantics.c so that there appears the following sparse warnings: net/ipv4/fib_semantics.c:553:17: error: undefined identifier 'lwtstate_free' CC net/ipv4/fib_semantics.o net/ipv4/fib_semantics.c: In function ‘fib_encap_match’: net/ipv4/fib_semantics.c:553:3: error: implicit declaration of function ‘lwtstate_free’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[1]: *** [net/ipv4/fib_semantics.o] Error 1 make: *** [net/ipv4/fib_semantics.o] Error 2 To eliminate the error, we define an empty function for lwtstate_free() in lwtunnel.h when CONFIG_LWTUNNEL is disabled. Fixes: df383e6240ef ("lwtunnel: fix memory leak") Cc: Jiri Benc <jbenc@redhat.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18vrf: drop unused num_slaves memberNikolay Aleksandrov1-1/+0
slave_queue has a num_slaves member which is unused, drop it. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18lwtunnel: fix memory leakJiri Benc1-1/+6
The built lwtunnel_state struct has to be freed after comparison. Fixes: 571e722676fe3 ("ipv4: support for fib route lwtunnel encap attributes") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: dsa: Add dsa_is_dsa_port() helperAndrew Lunn1-0/+5
Add an inline helper for determining is a port is a DSA port. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: Add inet_proto_csum_replace_by_diff utility functionTom Herbert1-0/+2
This function updates a checksum field value and skb->csum based on a value which is the difference between the old and new checksum. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.