path: root/include/rdma/ib_addr.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-10-25IB/core: Add VLAN support for IBoEEli Cohen1-4/+39
Add 802.1q VLAN support to IBoE. The VLAN tag is encoded within the GID derived from a link local address in the following way: GID[11] GID[12] contain the VLAN ID when the GID contains a VLAN. The 3 bits user priority field of the packets are identical to the 3 bits of the SL. In case of rdma_cm apps, the TOS field is used to generate the SL field by doing a shift right of 5 bits effectively taking to 3 MS bits of the TOS field. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-13RDMA/cm: Add RDMA CM support for IBoE devicesEli Cohen1-1/+98
Add support for IBoE device binding and IP --> GID resolution. Path resolving and multicast joining are implemented within cma.c by filling in the responses and running callbacks in the CMA work queue. IP --> GID resolution always yields IPv6 link local addresses; remote GIDs are derived from the destination MAC address of the remote port. Multicast GIDs are always mapped to multicast MACs as is done in IPv6. (IPv4 multicast is enabled by translating IPv4 multicast addresses to IPv6 multicast as described in <http://www.mail-archive.com/ipng@sunroof.eng.sun.com/msg02134.html>.) Some helper functions are added to ib_addr.h. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-11-19RDMA/cm: fix loopback address supportSean Hefty1-21/+10
The RDMA CM is intended to support the use of a loopback address when establishing a connection; however, the behavior of the CM when loopback addresses are used is confusing and does not always work, depending on whether loopback was specified by the server, the client, or both. The defined behavior of rdma_bind_addr is to associate an RDMA device with an rdma_cm_id, as long as the user specified a non- zero address. (ie they weren't just trying to reserve a port) Currently, if the loopback address is passed to rdam_bind_addr, no device is associated with the rdma_cm_id. Fix this. If a loopback address is specified by the client as the destination address for a connection, it will fail to establish a connection. This is true even if the server is listing across all addresses or on the loopback address itself. The issue is that the server tries to translate the IP address carried in the REQ message to a local net_device address, which fails. The translation is not needed in this case, since the REQ carries the actual HW address that should be used. Finally, cleanup loopback support to be more transport neutral. Replace separate calls to get/set the sgid and dgid from the device address to a single call that behaves correctly depending on the format of the device address. And support both IPv4 and IPv6 address formats. Signed-off-by: Sean Hefty <sean.hefty@intel.com> [ Fixed RDS build by s/ib_addr_get/rdma_addr_get/ - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-11-19IB/addr: Store net_device type instead of translating to RDMA transportSean Hefty1-1/+2
The struct rdma_dev_addr stores net_device address information: the source device address, destination hardware address, and broadcast address. For consistency, store the net_device type rather than converting it to the rdma_node_type. The type indicates the format of the various hardware addresses, which is what we're concerned with, and not the RDMA node type that the address may map to. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-11-19RDMA/cma: Replace net_device pointer with indexSean Hefty1-1/+1
Provide the device interface when resolving route information to ensure that the correct outbound device is used. This will also simplify processing of sin6_scope_id for IPv6 support. Based on work from: David Wilder <dwilder@us.ibm.com> Jason Gunthorpe <jgunthrope@obsidianresearch.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14RDMA/addr: Keep pointer to netdevice in struct rdma_dev_addrOr Gerlitz1-0/+1
Keep a pointer to the local (src) netdevice in struct rdma_dev_addr, and copy it in as part of rdma_copy_addr(). Use rdma_translate_ip() in cma_new_conn_id() to reduce some code duplication and also make sure the src_dev member gets set. In a high-availability configuration the netdevice pointer can be used by the RDMA CM to align RDMA sessions to use the same links as the IP stack does under fail-over and route change cases. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14RDMA: Fix license textSean Hefty1-19/+23
The license text for several files references a third software license that was inadvertently copied in. Update the license to what was intended. This update was based on a request from HP. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16IB/sa: Track multicast join/leave requestsSean Hefty1-0/+6
The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-02RDMA/addr: Use client registration to fix module unload raceSean Hefty1-1/+19
Require registration with ib_addr module to prevent caller from unloading while a callback is in progress. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22RDMA: iWARP Core Changes.Tom Tucker1-1/+16
Modifications to the existing rdma header files, core files, drivers, and ulp files to support iWARP, including: - Hook iWARP CM into the build system and use it in rdma_cm. - Convert enum ib_node_type to enum rdma_node_type, which includes the possibility of RDMA_NODE_RNIC, and update everything for this. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-14[PATCH] IB/addr: gid structure alignment fixMichael S. Tsirkin1-4/+6
The device address contains unsigned character arrays, which contain raw GID addresses. The GIDs may not be naturally aligned, so do not cast them to structures or unions. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-17IB: address translation to map IP toIB addresses (GIDs)Sean Hefty1-0/+114
Add an address translation service that maps IP addresses to InfiniBand GID addresses using IPoIB. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>