aboutsummaryrefslogtreecommitdiffstats
path: root/include/rdma/ib_verbs.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-22RDMA/nldev: Provide MR statisticsErez Alfasi1-0/+7
Add RDMA nldev netlink interface for dumping MR statistics information. Output example: $ ./ibv_rc_pingpong -o -P -s 500000000 local address: LID 0x0001, QPN 0x00008a, PSN 0xf81096, GID :: $ rdma stat show mr dev mlx5_0 mrn 2 page_faults 122071 page_invalidations 0 Link: https://lore.kernel.org/r/20191016062308.11886-5-leon@kernel.org Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22IB/mlx5: Introduce ODP diagnostic countersErez Alfasi1-0/+5
Introduce ODP diagnostic counters and count the following per MR within IB/mlx5 driver: 1) Page faults: Total number of faulted pages. 2) Page invalidations: Total number of pages invalidated by the OS during all invalidation events. The translations can be no longer valid due to either non-present pages or mapping changes. Link: https://lore.kernel.org/r/20191016062308.11886-2-leon@kernel.org Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22RDMA/rw: Support threshold for registration vs scattering to local pagesYamin Friedman1-0/+2
If there are more scatter entries than the recommended limit provided by the ib device, UMR registration is used. This will provide optimal performance when performing large RDMA READs over devices that advertise the threshold capability. With ConnectX-5 running NVMeoF RDMA with FIO single QP 128KB writes: Without use of cap: 70Gb/sec With use of cap: 84Gb/sec Link: https://lore.kernel.org/r/20191007135933.12483-3-leon@kernel.org Signed-off-by: Yamin Friedman <yaminf@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-3/+71
Pull RDMA subsystem updates from Jason Gunthorpe: "This cycle mainly saw lots of bug fixes and clean up code across the core code and several drivers, few new functional changes were made. - Many cleanup and bug fixes for hns - Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed, bnxt_re, efa - Share the query_port code between all the iWarp drivers - General rework and cleanup of the ODP MR umem code to fit better with the mmu notifier get/put scheme - Support rdma netlink in non init_net name spaces - mlx5 support for XRC devx and DC ODP" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits) RDMA: Fix double-free in srq creation error flow RDMA/efa: Fix incorrect error print IB/mlx5: Free mpi in mp_slave mode IB/mlx5: Use the original address for the page during free_pages RDMA/bnxt_re: Fix spelling mistake "missin_resp" -> "missing_resp" RDMA/hns: Package operations of rq inline buffer into separate functions RDMA/hns: Optimize cmd init and mode selection for hip08 IB/hfi1: Define variables as unsigned long to fix KASAN warning IB/{rdmavt, hfi1, qib}: Add a counter for credit waits IB/hfi1: Add traces for TID RDMA READ RDMA/siw: Relax from kmap_atomic() use in TX path IB/iser: Support up to 16MB data transfer in a single command RDMA/siw: Fix page address mapping in TX path RDMA: Fix goto target to release the allocated memory RDMA/usnic: Avoid overly large buffers on stack RDMA/odp: Add missing cast for 32 bit RDMA/hns: Use devm_platform_ioremap_resource() to simplify code Documentation/infiniband: update name of some functions RDMA/cma: Fix false error message RDMA/hns: Fix wrong assignment of qp_access_flags ...
2019-08-21RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'Jason Gunthorpe1-3/+0
This is a significant simplification, no extra list is kept per FD, and the interval tree is now shared between all the ucontexts, reducing overhead if there are multiple ucontexts active. Link: https://lore.kernel.org/r/20190806231548.25242-7-jgg@ziepe.ca Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21Merge branch 'odp_fixes' into rdma.git for-nextJason Gunthorpe1-3/+5
Jason Gunthorpe says: ==================== This is a collection of general cleanups for ODP to clarify some of the flows around umem creation and use of the interval tree. ==================== The branch is based on v5.3-rc5 due to dependencies * odp_fixes: RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr RDMA/mlx5: Use ib_umem_start instead of umem.address RDMA/core: Make invalidate_range a device operation RDMA/odp: Use kvcalloc for the dma_list and page_list RDMA/odp: Check for overflow when computing the umem_odp end RDMA/odp: Provide ib_umem_odp_release() to undo the allocs RDMA/odp: Split creating a umem_odp from ib_umem_get RDMA/odp: Make the three ways to create a umem_odp clear RMDA/odp: Consolidate umem_odp initialization RDMA/odp: Make it clearer when a umem is an implicit ODP umem RDMA/odp: Iterate over the whole rbtree directly RDMA/odp: Use the common interval tree library instead of generic RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21RDMA/core: Make invalidate_range a device operationMoni Shoua1-2/+2
The callback function 'invalidate_range' is implemented in a driver so the place for it is in the ib_device_ops structure and not in ib_ucontext. Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Link: https://lore.kernel.org/r/20190819111710.18440-11-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-20RDMA: Delete DEBUG codeLeon Romanovsky1-3/+0
There is no need to keep DEBUG defines for out-of-the tree testing. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190819114547.20704-1-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-12RDMA: Introduce ib_port_phys_state enumKamal Heib1-0/+10
In order to improve readability, add ib_port_phys_state enum to replace the use of magic numbers. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Andrew Boyer <aboyer@tobark.org> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Acked-by: Bernard Metzler <bmt@zurich.ibm.com> Link: https://lore.kernel.org/r/20190807103138.17219-2-kamalheib1@gmail.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-05RDMA/core: Introduce ratelimited ibdev printk functionsGal Pressman1-0/+42
Add ratelimited helpers to the ibdev_* printk functions. Implementation inspired by counterpart dev_*_ratelimited functions. Signed-off-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190801171447.54440-2-galpress@amazon.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-05rdma: Enable ib_alloc_cq to spread work over a device's comp_vectorsChuck Lever1-0/+19
Send and Receive completion is handled on a single CPU selected at the time each Completion Queue is allocated. Typically this is when an initiator instantiates an RDMA transport, or when a target accepts an RDMA connection. Some ULPs cannot open a connection per CPU to spread completion workload across available CPUs and MSI vectors. For such ULPs, provide an API that allows the RDMA core to select a completion vector based on the device's complement of available comp_vecs. ULPs that invoke ib_alloc_cq() with only comp_vector 0 are converted to use the new API so that their completion workloads interfere less with each other. Suggested-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Cc: <linux-cifs@vger.kernel.org> Cc: <v9fs-developer@lists.sourceforge.net> Link: https://lore.kernel.org/r/20190729171923.13428.52555.stgit@manet.1015granger.net Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-01RDMA/devices: Remove the lock around remove_client_contextJason Gunthorpe1-1/+0
Due to the complexity of client->remove() callbacks it is desirable to not hold any locks while calling them. Remove the last one by tracking only the highest client ID and running backwards from there over the xarray. Since the only purpose of that lock was to protect the linked list, we can drop the lock. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190731081841.32345-3-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-01RDMA/devices: Do not deadlock during client removalJason Gunthorpe1-0/+3
lockdep reports: WARNING: possible circular locking dependency detected modprobe/302 is trying to acquire lock: 0000000007c8919c ((wq_completion)ib_cm){+.+.}, at: flush_workqueue+0xdf/0x990 but task is already holding lock: 000000002d3d2ca9 (&device->client_data_rwsem){++++}, at: remove_client_context+0x79/0xd0 [ib_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&device->client_data_rwsem){++++}: down_read+0x3f/0x160 ib_get_net_dev_by_params+0xd5/0x200 [ib_core] cma_ib_req_handler+0x5f6/0x2090 [rdma_cm] cm_process_work+0x29/0x110 [ib_cm] cm_req_handler+0x10f5/0x1c00 [ib_cm] cm_work_handler+0x54c/0x311d [ib_cm] process_one_work+0x4aa/0xa30 worker_thread+0x62/0x5b0 kthread+0x1ca/0x1f0 ret_from_fork+0x24/0x30 -> #1 ((work_completion)(&(&work->work)->work)){+.+.}: process_one_work+0x45f/0xa30 worker_thread+0x62/0x5b0 kthread+0x1ca/0x1f0 ret_from_fork+0x24/0x30 -> #0 ((wq_completion)ib_cm){+.+.}: lock_acquire+0xc8/0x1d0 flush_workqueue+0x102/0x990 cm_remove_one+0x30e/0x3c0 [ib_cm] remove_client_context+0x94/0xd0 [ib_core] disable_device+0x10a/0x1f0 [ib_core] __ib_unregister_device+0x5a/0xe0 [ib_core] ib_unregister_device+0x21/0x30 [ib_core] mlx5_ib_stage_ib_reg_cleanup+0x9/0x10 [mlx5_ib] __mlx5_ib_remove+0x3d/0x70 [mlx5_ib] mlx5_ib_remove+0x12e/0x140 [mlx5_ib] mlx5_remove_device+0x144/0x150 [mlx5_core] mlx5_unregister_interface+0x3f/0xf0 [mlx5_core] mlx5_ib_cleanup+0x10/0x3a [mlx5_ib] __x64_sys_delete_module+0x227/0x350 do_syscall_64+0xc3/0x6a4 entry_SYSCALL_64_after_hwframe+0x49/0xbe Which is due to the read side of the client_data_rwsem being obtained recursively through a work queue flush during cm client removal. The lock is being held across the remove in remove_client_context() so that the function is a fence, once it returns the client is removed. This is required so that the two callers do not proceed with destruction until the client completes removal. Instead of using client_data_rwsem use the existing device unregistration refcount and add a similar client unregistration (client->uses) refcount. This will fence the two unregistration paths without holding any locks. Cc: <stable@vger.kernel.org> Fixes: 921eab1143aa ("RDMA/devices: Re-organize device.c locking") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190731081841.32345-2-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-08RDMA/core: Provide RDMA DIM support for ULPsYamin Friedman1-0/+4
Added the interface in the infiniband driver that applies the rdma_dim adaptive moderation. There is now a special function for allocating an ib_cq that uses rdma_dim. Performance improvement (ConnectX-5 100GbE, x86) running FIO benchmark over NVMf between two equal end-hosts with 56 cores across a Mellanox switch using null_blk device: READS without DIM: blk size | BW | IOPS | 99th percentile latency | 99.99th latency 512B | 3.8GiB/s | 7.7M | 1401 usec | 2442 usec 4k | 7.0GiB/s | 1.8M | 4817 usec | 6587 usec 64k | 10.7GiB/s| 175k | 9896 usec | 10028 usec IO WRITES without DIM: blk size | BW | IOPS | 99th percentile latency | 99.99th latency 512B | 3.6GiB/s | 7.5M | 1434 usec | 2474 usec 4k | 6.3GiB/s | 1.6M | 938 usec | 1221 usec 64k | 10.7GiB/s| 175k | 8979 usec | 12780 usec IO READS with DIM: blk size | BW | IOPS | 99th percentile latency | 99.99th latency 512B | 4GiB/s | 8.2M | 816 usec | 889 usec 4k | 10.1GiB/s| 2.65M| 3359 usec | 5080 usec 64k | 10.7GiB/s| 175k | 9896 usec | 10028 usec IO WRITES with DIM: blk size | BW | IOPS | 99th percentile latency | 99.99th latency 512B | 3.9GiB/s | 8.1M | 799 usec | 922 usec 4k | 9.6GiB/s | 2.5M | 717 usec | 1004 usec 64k | 10.7GiB/s| 176k | 8586 usec | 12256 usec The rdma_dim algorithm was designed to measure the effectiveness of moderation on the flow in a general way and thus should be appropriate for all RDMA storage protocols. rdma_dim is configured to be the default option based on performance improvement seen after extensive tests. Signed-off-by: Yamin Friedman <yaminf@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08IB/mlx5: Report correctly tag matching rendezvous capabilityDanit Goldberg1-2/+2
Userspace expects the IB_TM_CAP_RC bit to indicate that the device supports RC transport tag matching with rendezvous offload. However the firmware splits this into two capabilities for eager and rendezvous tag matching. Only if the FW supports both modes should userspace be told the tag matching capability is available. Cc: <stable@vger.kernel.org> # 4.13 Fixes: eb761894351d ("IB/mlx5: Fill XRQ capabilities") Signed-off-by: Danit Goldberg <danitg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/nldev: Allow get default counter statistics through RDMA netlinkMark Zhang1-0/+1
This patch adds the ability to return the hwstats of per-port default counters (which can also be queried through sysfs nodes). Signed-off-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/netlink: Implement counter dumpit calbackMark Zhang1-0/+10
This patch adds the ability to return all available counters together with their properties and hwstats. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/counter: Add "auto" configuration mode supportMark Zhang1-0/+18
In auto mode all QPs belong to one category are bind automatically to a single counter set. Currently only "qp type" is supported. In this mode the qp counter is set in RST2INIT modification, and when a qp is destroyed the counter is unbound. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/counter: Add set/clear per-port auto mode supportMark Zhang1-0/+2
Add an API to support set/clear per-port auto mode. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28Merge tag 'v5.2-rc6' into rdma.git for-nextJason Gunthorpe1-0/+1
For dependencies in next patches. Resolve conflicts: - Use uverbs_get_cleared_udata() with new cq allocation flow - Continue to delete nes despite SPDX conflict - Resolve list appends in mlx5_command_str() - Use u16 for vport_rule stuff - Resolve list appends in struct ib_client Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/mlx5: Remove unused IB_WR_REG_SIG_MR codeIsrael Rukshin1-19/+0
IB_WR_REG_SIG_MR is not needed after IB_WR_REG_MR_INTEGRITY was used. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Validate integrity handover device capMax Gurtovoy1-0/+1
Protect the case that a ULP tries to allocate a QP with signature enabled flag while the LLD doesn't support this feature. While we're here, also move integrity_en attribute from mlx5_qp to ib_qp as a preparation for adding new integrity API to the rw-API (that is part of ib_core module). Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Rename signature qp create flag and signature device capabilityIsrael Rukshin1-2/+2
Rename IB_QP_CREATE_SIGNATURE_EN to IB_QP_CREATE_INTEGRITY_EN and IB_DEVICE_SIGNATURE_HANDOVER to IB_DEVICE_INTEGRITY_HANDOVER. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/mlx5: Introduce and implement new IB_WR_REG_MR_INTEGRITY work requestMax Gurtovoy1-0/+1
This new WR will be used to perform PI (protection information) handover using the new API. Using the new API, the user will post a single WR that will internally perform all the needed actions to complete PI operation. This new WR will use a memory region that was allocated as IB_MR_TYPE_INTEGRITY and was mapped using ib_map_mr_sg_pi to perform the registration. In the old API, in order to perform a signature handover operation, each ULP should perform the following: 1. Map and register the data buffers. 2. Map and register the protection buffers. 3. Post a special reg WR to configure the signature handover operation layout. 4. Invalidate the signature memory key. 5. Invalidate protection buffers memory key. 6. Invalidate data buffers memory key. In the new API, the mapping of both data and protection buffers is performed using a single call to ib_map_mr_sg_pi function. Also the registration of the buffers and the configuration of the signature operation layout is done by a single new work request called IB_WR_REG_MR_INTEGRITY. This patch implements this operation for mlx5 devices that are capable to offload data integrity generation/validation while performing the actual buffer transfer. This patch will not remove the old signature API that is used by the iSER initiator and target drivers. This will be done in the future. In the internal implementation, for each IB_WR_REG_MR_INTEGRITY work request, we are using a single UMR operation to register both data and protection buffers using KLM's. Afterwards, another UMR operation will describe the strided block format. These will be followed by 2 SET_PSV operations to set the memory/wire domains initial signature parameters passed by the user. In the end of the whole transaction, only the signature memory key (the one that exposed for the RDMA operation) will be invalidated. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/mlx5: Add attr for max number page list length for PI operationMax Gurtovoy1-0/+1
PI offload (protection information) is a feature that each RDMA provider can implement differently. Thus, introduce new device attribute to define the maximal length of the page list for PI fast registration operation. For example, mlx5 driver uses a single internal MR to map both data and protection SGL's, so it's equal to max_fast_reg_page_list_len / 2. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Add signature attrs element for ib_mr structureMax Gurtovoy1-1/+1
This element will describe the needed characteristics for the signature operation per signature enabled memory region (type IB_MR_TYPE_INTEGRITY). Also add meta_length attribute to ib_sig_attrs structure for saving the mapped metadata length (needed for the new API implementation). Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Introduce ib_map_mr_sg_pi to map data/protection sgl'sMax Gurtovoy1-0/+9
This function will map the previously dma mapped SG lists for PI (protection information) and data to an appropriate memory region for future registration. The given MR must be allocated as IB_MR_TYPE_INTEGRITY. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Introduce IB_MR_TYPE_INTEGRITY and ib_alloc_mr_integrity APIIsrael Rukshin1-0/+10
This is a preparation for signature verbs API re-design. In the new design a single MR with IB_MR_TYPE_INTEGRITY type will be used to perform the needed mapping for data integrity operations. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Save the MR type in the ib_mr structureMax Gurtovoy1-0/+10
This is a preparation for the signature verbs API change. This change is needed since the MR type will define, in the upcoming patches, the need for allocating internal resources in LLD for signature handover related operations. It will also help to make sure that signature related functions are called with an appropriate MR type and fail otherwise. Also introduce new mr types IB_MR_TYPE_USER, IB_MR_TYPE_DMA and IB_MR_TYPE_DM for correctness. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Introduce new header file for signature operationsMax Gurtovoy1-111/+1
Ease the exhausted ib_verbs.h file and make the code more readable. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-20RDMA: Convert destroy_wq to be voidLeon Romanovsky1-1/+1
All callers of destroy WQ are always success and there is no need to check their return value, so convert destroy_wq to be void. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-18RDMA: Report available cdevs through RDMA_NLDEV_CMD_GET_CHARDEVJason Gunthorpe1-0/+1
Update the struct ib_client for all modules exporting cdevs related to the ibdevice to also implement RDMA_NLDEV_CMD_GET_CHARDEV. All cdevs are now autoloadable and discoverable by userspace over netlink instead of relying on sysfs. uverbs also exposes the DRIVER_ID for drivers that are able to support driver id binding in rdma-core. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-18RDMA: Add NLDEV_GET_CHARDEV to allow char dev discovery and autoloadJason Gunthorpe1-0/+4
Allow userspace to issue a netlink query against the ib_device for something like "uverbs" and get back the char dev name, inode major/minor, and interface ABI information for "uverbs0". Since we are now in netlink this can also trigger a module autoload to make the uverbs device come into existence. Largely this will let us replace searching and reading inside sysfs to setup devices, and provides an alternative (using driver_id) to device name based provider binding for things like rxe. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-17RDMA: Move rdma_node_type to uapi/Jason Gunthorpe1-12/+1
This enum is exposed over the sysfs file 'node_type' and over netlink via RDMA_NLDEV_ATTR_DEV_NODE_TYPE, so declare it in the uapi headers. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-11RDMA: Convert CQ allocations to be under core responsibilityLeon Romanovsky1-3/+3
Ensure that CQ is allocated and freed by IB/core and not by drivers. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-11RDMA: Clean destroy CQ in drivers do not return errorsLeon Romanovsky1-1/+1
Like all other destroy commands, .destroy_cq() call is not supposed to fail. In all flows, the attempt to return earlier caused to memory leaks. This patch converts .destroy_cq() to do not return any errors. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Gal Pressman <galpress@amazon.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-10RDMA: Move owner into struct ib_device_opsJason Gunthorpe1-1/+1
This more closely follows how other subsytems work, with owner being a member of the structure containing the function pointers. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-10RDMA: Move uverbs_abi_ver into struct ib_device_opsJason Gunthorpe1-1/+1
No reason for every driver to emit code to set this, just make it part of the driver's existing static const ops structure. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-10RDMA: Move driver_id into struct ib_device_opsJason Gunthorpe1-1/+2
No reason for every driver to emit code to set this, just make it part of the driver's existing static const ops structure. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21RDMA/core: Make ib_destroy_cq() voidLeon Romanovsky1-2/+2
Kernel destroy CQ flows can't fail and the returned value of ib_destroy_cq() is not interested in those flows. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21RDMA/srp: Rename SRP sysfs name after IB device rename triggerLeon Romanovsky1-0/+1
SRP logic used device name and port index as symlink to relevant kobject. If the IB device is renamed then the prior name will be re-used by the next device plugged in and sysfs will panic as SRP will try to re-use the same name. mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0 sysfs: cannot create duplicate filename '/class/infiniband_srp/srp-mlx5_0-1' CPU: 3 PID: 1107 Comm: modprobe Not tainted 5.1.0-for-upstream-perf-2019-05-12_15-09-52-87 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0x5a/0x73 sysfs_warn_dup+0x58/0x70 sysfs_do_create_link_sd.isra.2+0xa3/0xb0 device_add+0x33f/0x660 srp_add_one+0x301/0x4f0 [ib_srp] add_client_context+0x99/0xe0 [ib_core] enable_device_and_get+0xd1/0x1b0 [ib_core] ib_register_device+0x533/0x710 [ib_core] ? mutex_lock+0xe/0x30 __mlx5_ib_add+0x23/0x70 [mlx5_ib] mlx5_add_device+0x4e/0xd0 [mlx5_core] mlx5_register_interface+0x85/0xc0 [mlx5_core] ? 0xffffffffa0791000 do_one_initcall+0x4b/0x1cb ? kmem_cache_alloc_trace+0xc6/0x1d0 ? do_init_module+0x22/0x21f do_init_module+0x5a/0x21f load_module+0x17f2/0x1ca0 ? m_show+0x1c0/0x1c0 __do_sys_finit_module+0x94/0xe0 do_syscall_64+0x48/0x120 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f157cce10d9 The module load/unload sequence was used to trigger such kernel panic: sudo modprobe ib_srp sudo modprobe -r mlx5_ib sudo modprobe -r mlx5_core sudo modprobe mlx5_core Have SRP track the name of the core device so that it can't have a name collision. Fixes: d21943dd19b5 ("RDMA/core: Implement IB device rename function") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06RDMA: Add EFA related definitionsGal Pressman1-1/+3
Add EFA driver ID to the IOCTL interface uapi. This patch also adds unspecified node/transport type that will be used by EFA (usnic is left unchanged as it's already part of our ABI). Signed-off-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06RDMA/verbs: Add a DMA iterator to return aligned contiguous memory blocksShiraz Saleem1-0/+47
This helper iterates over a DMA-mapped SGL and returns contiguous memory blocks aligned to a HW supported page size. Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-06RDMA/umem: Add API to find best driver supported page size in an MRShiraz Saleem1-0/+24
This helper iterates through the SG list to find the best page size to use from a bitmap of HW supported page sizes. Drivers that support multiple page sizes, but not mixed sizes in an MR can use this API. Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03RDMA/core: Allow detaching gid attribute netdevice for RoCEParav Pandit1-1/+1
When there is active traffic through a GID, a QP/AH holds reference to this GID entry. RoCE GID entry holds reference to its attached netdevice. Due to this when netdevice is deleted by admin user, its refcount is not dropped. Therefore, while deleting RoCE GID, wait for all GID attribute's netdev users to finish accessing netdev in rcu context. Once all users done accessing it, release the netdev refcount. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03RDMA: Get rid of iw_cm_verbsKamal Heib1-4/+19
Integrate iw_cm_verbs data members into ib_device_ops and ib_device structs, this is done to achieve the following: 1) Avoid memory related bugs durring error unwind 2) Make the code more cleaner 3) Reduce code duplication Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-01RDMA/core: Introduce RDMA subsystem ibdev_* print functionsGal Pressman1-0/+30
Similarly to dev/netdev/etc printk helpers, add standard printk helpers for the RDMA subsystem. Example output: efa 0000:00:06.0 efa_0: Hello World! efa_0: Hello World! (no parent device set) (NULL ib_device): Hello World! (ibdev is NULL) Cc: Jason Baron <jbaron@akamai.com> Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Suggested-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-04-24Merge branch 'rdma_mmap' into rdma.git for-nextJason Gunthorpe1-9/+0
Jason Gunthorpe says: ==================== Upon review it turns out there are some long standing problems in BAR mapping area: * BAR pages intended for read-only can be switched to writable via mprotect. * Missing use of rdma_user_mmap_io for the mlx5 clock BAR page. * Disassociate causes SIGBUS when touching the pages. * CPU pages are being mapped through to the process via remap_pfn_range instead of the more appropriate vm_insert_page, causing weird behaviors during disassociation. This series adds the missing VM_* flag manipulation, adds faulting a zero page for disassociation and revises the CPU page mappings to use vm_insert_page. ==================== For dependencies this branch is based on for-rc from git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git * branch 'rdma_mmap': RDMA: Remove rdma_user_mmap_page RDMA/mlx5: Use get_zeroed_page() for clock_info RDMA/ucontext: Fix regression with disassociate RDMA/mlx5: Use rdma_user_map_io for mapping BAR pages RDMA/mlx5: Do not allow the user to write to the clock page Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24RDMA: Remove rdma_user_mmap_pageJason Gunthorpe1-9/+0
Upon further research drivers that want this should simply call the core function vm_insert_page(). The VMA holds a reference on the page and it will be automatically freed when the last reference drops. No need for disassociate to sequence the cleanup. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08RDMA: Handle SRQ allocations by IB/coreLeon Romanovsky1-4/+5
Convert SRQ allocation from drivers to be in the IB/core Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.