| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull rdma fixes from Jason Gunthorpe:
"Here are eight fairly small fixes collected over the last two weeks.
Regression and crashing bug fixes:
- mlx4/5: Fixes for issues found from various checkers
- A resource tracking and uverbs regression in the core code
- qedr: NULL pointer regression found during testing
- rxe: Various small bugs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/rxe: Fix missing completion for mem_reg work requests
RDMA/core: Save kernel caller name when creating CQ using ib_create_cq()
IB/uverbs: Fix ordering of ucontext check in ib_uverbs_write
IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()'
RDMA/qedr: Fix NULL pointer dereference when running over iWARP without RDMA-CM
IB/mlx5: Fix return value check in flow_counters_set_data()
IB/mlx5: Fix memory leak in mlx5_ib_create_flow
IB/rxe: avoid double kfree skb
|
|
Few kernel applications like SCST-iSER create CQ using ib_create_cq(),
where accessing CQ structures using rdma restrack tool leads to below NULL
pointer dereference. This patch saves caller kernel module name similar to
ib_alloc_cq().
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8132ca70>] skip_spaces+0x30/0x30
PGD 738bac067 PUD 8533f0067 PMD 0
Oops: 0000 [#1] SMP
R10: ffff88017fc03300 R11: 0000000000000246 R12: 0000000000000000
R13: ffff88082fa5a668 R14: ffff88017475a000 R15: 0000000000000000
FS: 00002b32726582c0(0000) GS:ffff88087fc40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000008491a1000 CR4: 00000000003607e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
[<ffffffffc05af69c>] ? fill_res_name_pid+0x7c/0x90 [ib_core]
[<ffffffffc05af79f>] fill_res_cq_entry+0xef/0x170 [ib_core]
[<ffffffffc05af4c4>] res_get_common_dumpit+0x3c4/0x480 [ib_core]
[<ffffffffc05af5d3>] nldev_res_get_cq_dumpit+0x13/0x20 [ib_core]
[<ffffffff815bc1e7>] netlink_dump+0x117/0x2e0
[<ffffffff815bcb8b>] __netlink_dump_start+0x1ab/0x230
[<ffffffffc059fead>] ibnl_rcv_msg+0x11d/0x1f0 [ib_core]
[<ffffffffc05af5c0>] ? nldev_res_get_mr_dumpit+0x20/0x20 [ib_core]
[<ffffffffc059fd90>] ? rdma_nl_multicast+0x30/0x30 [ib_core]
[<ffffffff815bea49>] netlink_rcv_skb+0xa9/0xc0
[<ffffffffc05a0018>] ibnl_rcv+0x98/0xb0 [ib_core]
[<ffffffff815be132>] netlink_unicast+0xf2/0x1b0
[<ffffffff815be50f>] netlink_sendmsg+0x31f/0x6a0
[<ffffffff8156b580>] sock_sendmsg+0xb0/0xf0
[<ffffffff816ace9e>] ? _raw_spin_unlock_bh+0x1e/0x20
[<ffffffff8156f998>] ? release_sock+0x118/0x170
[<ffffffff8156b731>] SYSC_sendto+0x121/0x1c0
[<ffffffff81568340>] ? sock_alloc_file+0xa0/0x140
[<ffffffff81221265>] ? __fd_install+0x25/0x60
[<ffffffff8156c2ce>] SyS_sendto+0xe/0x10
[<ffffffff816b6c2a>] system_call_fastpath+0x16/0x1b
RIP [<ffffffff8132ca70>] skip_spaces+0x30/0x30
RSP <ffff88072be97760>
CR2: 0000000000000000
Cc: <stable@vger.kernel.org>
Fixes: f66c8ba4c9fa ("RDMA/core: Save kernel caller name when creating PD and CQ objects")
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The flows were hidden from the C compiler; expose them as a zero-length
array to allow struct_size to work.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Resource tracking is supposed to be dual licensed: GPL-2.0 and
OpenIB, but the SPDX tag was not compliant to it. Update the tag to
properly reflect license.
Fixes: 02d8883f520e ("RDMA/restrack: Add general infrastructure to track RDMA resources")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
T10-PI offload capability is currently supported in iSER protocol only,
and the definition of the HCA protection information checks are missing
from the core layer. Add those definition to avoid code duplication in
other drivers (such iSER target and NVMeoF).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Pull verbs counters series from Leon Romanovsky:
====================
Verbs flow counters support
This series comes to allow user space applications to monitor real time
traffic activity and events of the verbs objects it manages, e.g.: ibv_qp,
ibv_wq, ibv_flow.
The API enables generic counters creation and define mapping to
association with a verbs object, the current mlx5 driver is using this API
for flow counters.
With this API, an application can monitor the entire life cycle of object
activity, defined here as a static counters attachment. This API also
allows dynamic counters monitoring of measurement points for a partial
period in the verbs object life cycle.
In addition it presents the implementation of the generic counters
interface.
This will be achieved by extending flow creation by adding a new flow
count specification type which allows the user to associate a previously
created flow counters using the generic verbs counters interface to the
created flow, once associated the user could read statistics by using the
read function of the generic counters interface.
The API includes:
1. create and destroyed API of a new counters objects
2. read the counters values from HW
Note:
Attaching API to allow application to define the measurement points per
objects is a user space only API and this data is passed to kernel when
the counted object (e.g. flow) is created with the counters object.
===================
* tag 'verbs_flow_counters':
IB/mlx5: Add counters read support
IB/mlx5: Add flow counters read support
IB/mlx5: Add flow counters binding support
IB/mlx5: Add counters create and destroy support
IB/uverbs: Add support for flow counters
IB/core: Add support for flow counters
IB/core: Support passing uhw for create_flow
IB/uverbs: Add read counters support
IB/core: Introduce counters read verb
IB/uverbs: Add create/destroy counters support
IB/core: Introduce counters object and its create/destroy
IB/uverbs: Add an ib_uobject getter to ioctl() infrastructure
net/mlx5: Export flow counter related API
net/mlx5: Use flow counter pointer as input to the query function
|
|
A counters object could be attached to flow on creation by providing the
counter specification action.
General counters description which count packets and bytes are introduced,
downstream patches from this series will use them as part of flow counters
binding.
In addition, increase number of flow specifications supported layers to 10
upon adding count specification and for the previously added drop
specification.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This is required when user-space drivers need to pass extra information
regarding how to handle this flow steering specification.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The user supplies counters instance and a reference to an output array of
uint64_t. The driver reads the hardware counters values and writes them
to the output index location in the user supplied array. All counters
values are represented as uint64_t types.
To be able to successfully read the data the counters must be first bound
to an IB object.
Downstream patches will present binding method for flow counters.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
A verbs application may need to get statistics and info on various aspects
of a verb object (e.g. Flow, QP, ...), in general case the application
will state which object's counters its interested in (we refer to this
action as attach), bind this new counters object to the appropriate verb
object and on later stage read their values using the counters object.
This series introduces a general API for counters object that may
accumulate any ib object counters type, bound and read on demand.
Counters instance is allocated on an IB context and belongs to that
context. Upon successful creation the counters can be bound to a verbs
object so that hardware counter instances can be created and read.
Downstream patches in this series will introduce the attach, bind and the
read functionality.
Counters instance can be de-allocated, upon successful destruction the
related hardware resources are released.
Prior to destroy call the user must first make sure that the counters is
not being used by any IB object, e.g. not attached to any of its counted
type otherwise an EBUSY error is invoked.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Previously, the user had to dig inside the attribute to get the uobject.
Add a helper function that correctly extract it (and do the required
checks) for him/her.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Update mlx4 to support user MR creation against read-only memory, previously
it required the memory to be writable.
Based on rdma for-rc due to dependencies.
* mr_fix: (2 commits)
IB/mlx4: Mark user MR as writable if actual virtual memory is writable
IB/core: Make testing MR flags for writability a static inline function
|
|
Make the MR writability flags check, which is performed in umem.c,
a static inline function in file ib_verbs.h
This allows the function to be used by low-level infiniband drivers.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
Instead of open coding memcmp() to check whether a given GID is zero or
not, use a helper function to do so, and replace instances of
memcpy(z,&zgid) with memset.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The err pointer comes from uverbs_attr_get, not from the uobject member,
which does not store an ERR_PTR.
Fixes: be934cca9e98 ("IB/uverbs: Add device memory registration ioctl support")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
|
|
Add a helper function for iwarp drivers to be able to map an
rdma_cm_id to an iw_cm_id. This is useful for dumping driver specific
NLDEV/RESTRACK connection state.
Add a helper to return the rdma_cm_id pointer from the rdma_restack
pointer. This is needed for rdma drivers to map a res entry back to
the public rdma_cm_id struct.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add a new MPLS steering match filter that can match against
a single MPLS tag field.
Since the MPLS header can reside in different locations in the packet's
protocol stack as well as be encapsulated with a tunnel protocol, it
is required to know the exact location of the header in the protocol
stack.
Therefore, when including the MPLS protocol spec in the specs list,
it is mandatory to provide the list in an ordered manner, so
that it represents the actual header order in a matching packet.
Drivers that process the spec list and apply the matching rule
should treat the position of the MPLS spec in the spec list as the
actual location of the MPLS label in the packet's protocol stack.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Adding a new GRE steering match filter that can match against
key and protocol fields.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
User-space may invoke ibv_reg_mr and ibv_dereg_mr in different threads.
If ibv_dereg_mr is called after the thread which invoked ibv_reg_mr has
exited, get_pid_task will return NULL and ib_umem_release will not
decrease mm->pinned_vm.
Instead of using threads to locate the mm, use the overall tgid from the
ib_ucontext struct instead. This matches the behavior of ODP and
disassociate in handling the mm of the process that called ibv_reg_mr.
Cc: <stable@vger.kernel.org>
Fixes: 87773dd56d54 ("IB: ib_umem_release() should decrement mm->pinned_vm from ib_umem_get")
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Moving receive-side WQE allocation logic into rdmavt will allow
further code reuse between qib and hfi1 drivers.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Currently the driver doesn't support completion vectors. These
are used to indicate which sets of CQs should be grouped together
into the same vector. A vector is a CQ processing thread that
runs on a specific CPU.
If an application has several CQs bound to different completion
vectors, and each completion vector runs on different CPUs, then
the completion queue workload is balanced. This helps scale as more
nodes are used.
Implement CQ completion vector support using a global workqueue
where a CQ entry is queued to the CPU corresponding to the CQ's
completion vector. Since the workqueue is global, it's guaranteed
to always be there when queueing CQ entries; Therefore, the RCU
locking for cq->rdi->worker in the hot path is superfluous.
Each completion vector is assigned to a different CPU. The number of
completion vectors available is computed by taking the number of
online, physical CPUs from the local NUMA node and subtracting the
CPUs used for kernel receive queues and the general interrupt.
Special use cases:
* If there are no CPUs left for completion vectors, the same CPU
for the general interrupt is used; Therefore, there would only
be one completion vector available.
* For multi-HFI systems, the number of completion vectors available
for each device is the total number of completion vectors in
the local NUMA node divided by the number of devices in the same
NUMA node. If there's a division remainder, the first device to
get initialized gets an extra completion vector.
Upon a CQ creation, an invalid completion vector could be specified.
Handle it as follows:
* If the completion vector is less than 0, set it to 0.
* Set the completion vector to the result of the passed completion
vector moded with the number of device completion vectors
available.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
All threads queuing CQ entries on different CQs are unnecessarily
synchronized by a spin lock to check if the CQ kthread worker hasn't
been destroyed before queuing an CQ entry.
The lock used in 6efaf10f163d ("IB/rdmavt: Avoid queuing work into a
destroyed cq kthread worker") is a device global lock and will have
poor performance at scale as completions are entered from a large
number of CPUs.
Convert to use RCU where the read side of RCU is rvt_cq_enter() to
determine that the worker is alive prior to triggering the
completion event.
Apply write side RCU semantics in rvt_driver_cq_init() and
rvt_cq_exit().
Fixes: 6efaf10f163d ("IB/rdmavt: Avoid queuing work into a destroyed cq kthread worker")
Cc: <stable@vger.kernel.org> # 4.14.x
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
These help rdma drivers to fill out the driver entries.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Each driver can register a "fill entry" function with the restrack core.
This function will be called when filling out a resource, allowing the
driver to add driver-specific details. The details consist of a
nltable of nested attributes, that are in the form of <key, [print-type],
value> tuples. Both key and value attributes are mandatory. The key
nlattr must be a string, and the value nlattr can be one of the driver
attributes that are generic, but typed, allowing the attributes to be
validated. Currently the driver nlattr types include string, s32,
u32, s64, and u64. The print-type nlattr allows a driver to specify
an alternative display format for user tools displaying the attribute.
For example, a u32 attribute will default to "%u", but a print-type
attribute can be included for it to be displayed in hex. This allows
the user tool to print the number in the format desired by the driver
driver.
More attrs can be defined as they become needed by drivers.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The only thing it does is block module unload while work is posted from
rdma_resolve_ip().
However, this is not the right place to do this. The users of
rdma_resolve_ip() must ensure their own module does not unload until
rdma_resolve_ip() calls the callback, or until rdma_addr_cancel() is
called.
Similarly callers to rdma_addr_find_l2_eth_by_grh() must ensure their
module does not unload while they are calling code.
The only two users are already safe, so there is no need for this.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Pull rdma updates from Jason Gunthorpe:
"Doug and I are at a conference next week so if another PR is sent I
expect it to only be bug fixes. Parav noted yesterday that there are
some fringe case behavior changes in his work that he would like to
fix, and I see that Intel has a number of rc looking patches for HFI1
they posted yesterday.
Parav is again the biggest contributor by patch count with his ongoing
work to enable container support in the RDMA stack, followed by Leon
doing syzkaller inspired cleanups, though most of the actual fixing
went to RC.
There is one uncomfortable series here fixing the user ABI to actually
work as intended in 32 bit mode. There are lots of notes in the commit
messages, but the basic summary is we don't think there is an actual
32 bit kernel user of drivers/infiniband for several good reasons.
However we are seeing people want to use a 32 bit user space with 64
bit kernel, which didn't completely work today. So in fixing it we
required a 32 bit rxe user to upgrade their userspace. rxe users are
still already quite rare and we think a 32 bit one is non-existing.
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back).
This series addresses an IRQ performance issue (patch 1),
cleanups related to the fix for the IRQ performance problem
(patches 2-6), and then extends the fragmented completion queue
support that already exists in the net side of the driver to the
ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the
remaining 10 patches to the IB subsystem. This series extends
the current 'representor' framework when the mlx5 driver is in
switchdev mode from being a netdev only construct to being a
netdev/IB dev construct. The IB dev is limited to raw Eth queue
pairs only, but by having an IB dev of this type attached to the
representor for a switchdev port, it enables DPDK to work on the
switchdev device.
* All net related, but needed as infrastructure for the rdma
driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users
need to set the port for ib_srpt to listen on in configfs in order
for it to be enabled
(/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while
working on new code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from
Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device
memory' user API features
- Infrastructure updates for the new IOCTL interface, based on
increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64
bit kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them"
* tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (199 commits)
IB/rxe: Fix for oops in rxe_register_device on ppc64le arch
IB/mlx5: Device memory mr registration support
net/mlx5: Mkey creation command adjustments
IB/mlx5: Device memory support in mlx5_ib
net/mlx5: Query device memory capabilities
IB/uverbs: Add device memory registration ioctl support
IB/uverbs: Add alloc/free dm uverbs ioctl support
IB/uverbs: Add device memory capabilities reporting
IB/uverbs: Expose device memory capabilities to user
RDMA/qedr: Fix wmb usage in qedr
IB/rxe: Removed GID add/del dummy routines
RDMA/qedr: Zero stack memory before copying to user space
IB/mlx5: Add ability to hash by IPSEC_SPI when creating a TIR
IB/mlx5: Add information for querying IPsec capabilities
IB/mlx5: Add IPsec support for egress and ingress
{net,IB}/mlx5: Add ipsec helper
IB/mlx5: Add modify_flow_action_esp verb
IB/mlx5: Add implementation for create and destroy action_xfrm
IB/uverbs: Introduce ESP steering match filter
IB/uverbs: Add modify ESP flow_action
...
|
|
Adding new ioctl method for the MR object - REG_DM_MR.
This command can be used by users to register an allocated
device memory buffer as an MR and receive lkey and rkey
to be used within work requests.
It is added as a new method under the MR object and using a new
ib_device callback - reg_dm_mr.
The command creates a standard ib_mr object which represents the
registered memory.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This change adds uverbs support for allocation/freeing
of device memory commands.
A new uverbs object is defined of type idr to represent
and track the new resource type allocation per context.
The API requires provider driver to implement 2 new ib_device
callbacks - one for allocation and one for deallocation which
return and accept (respectively) the ib_dm object which represents
the allocated memory on the device.
The support is added via the ioctl command infrastructure
only.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This change allows vendors to report device memory capability
max_dm_size - to user via uverbs command.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Adding a new ESP steering match filter that could match against
spi and seq used in IPSec protocol.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
flow_actions of ESP type could be modified during runtime. This could be
common for example when ESN should be changed. Adding a new
UVERBS_FLOW_ACTION_ESP_MODIFY method for changing ESP parameters of an
existing ESP flow_action.
The new method uses the UVERBS_FLOW_ACTION_ESP_CREATE attributes, but
adds a new IB_FLOW_ACTION_ESP_FLAGS_MOD_ESP_ATTRS which means ESP_ATTRS
should be changed.
In addition, we add a new FLOW_ACTION_ESP_REPLAY_NONE replay type that
could be used when one wants to disable a replay protection over a
specific flow_action.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The egress flag indicates that this flow steering rule is for egress
traffic. The scope of an egress rule is port-wide, meaning all packets
originated from that port, which match the steering rule specification
will be effected by this steering rule's action.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Binding a flow_action to flow steering rule requires using a new
specification. Therefore, adding such an IB_FLOW_SPEC_ACTION_HANDLE flow
specification.
Flow steering rules could use flow_action(s) and as of that we need to
avoid deleting flow_action(s) as long as they're being used.
Moreover, when the attached rules are deleted, action_handle reference
count should be decremented. Introducing a new mechanism of flow
resources to keep track on the attached action_handle(s). Later on, this
mechanism should be extended to other attached flow steering resources
like flow counters.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
A verbs application may receive and transmits packets using a data
path pipeline. Sometimes, the first stage in the receive pipeline or
the last stage in the transmit pipeline involves transforming a
packet, either in order to make it easier for later stages to process
it or to prepare it for transmission over the wire. Such transformation
could be stripping/encapsulating the packet (i.e. vxlan),
decrypting/encrypting it (i.e. ipsec), altering headers, doing some
complex FPGA changes, etc.
Some hardware could do such transformations without software data path
intervention at all. The flow steering API supports steering a
packet (either to a QP or dropping it) and some simple packet
immutable actions (i.e. tagging a packet). Complex actions, that may
change the packet, could bloat the flow steering API extensively.
Sometimes the same action should be applied to several flows.
In this case, it's easier to bind several flows to the same action and
modify it than change all matching flows.
Introducing a new flow_action object that abstracts any packet
transformation (out of a standard and well defined set of actions).
This flow_action object could be tied to a flow steering rule via a
new specification.
Currently, we support esp flow_action, which encrypts or decrypts a
packet according to the given parameters. However, we present a
flexible schema that could be used to other transformation actions tied
to flow rules.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Methods sometimes need to get one attribute out of a group of
pre-defined attributes. This is an enum-like behavior. Since
this is a common requirement, we add a new ENUM attribute to the
generic uverbs ioctl() layer. This attribute is embedded in methods,
like any other attributes we currently have. ENUM attributes point to
an array of standard UVERBS_ATTR_PTR_IN. The user-space encodes the
enum's attribute id in the id field and the internal PTR_IN attr id in
the enum_data.elem_id field. This ENUM attribute could be shared by
several attributes and it can get UVERBS_ATTR_SPEC_F_MANDATORY flag,
stating this attribute must be supported by the kernel, like any other
attribute.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Now that ib_gid_attr contains device, port and index, simplify the
provider APIs add_gid() and del_gid() to use device, port and index
fields from the ib_gid_attr attributes structure.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Code is refactored to prepare separate functions for RoCE which can do more
complex operations related to reference counting, while still
maintainining code readability. This includes
(a) Simplification to not perform netdevice checks and modifications
for IB link layer.
(b) Do not add RoCE GID entry which has NULL netdevice; instead return
an error.
(c) If GID addition fails at provider level add_gid(), do not add the
entry in the cache and keep the entry marked as INVALID.
(d) Simplify and reuse the ib_cache_gid_add()/del() routines so that they
can be used even for modifying default GIDs. This avoid some code
duplication in modifying default GIDs.
(e) find_gid() routine refers to the data entry flags to qualify a GID
as valid or invalid GID rather than depending on attributes and zeroness
of the GID content.
(f) gid_table_reserve_default() sets the GID default attribute at
beginning while setting up the GID table. There is no need to use
default_gid flag in low level functions such as write_gid(), add_gid(),
del_gid(), as they never need to update the DEFAULT property of the GID
entry while during GID table update.
As as result of this refactor, reserved GID 0:0:0:0:0:0:0:0 is no longer
searchable as described below.
A unicast GID entry of 0:0:0:0:0:0:0:0 is Reserved GID as per the IB
spec version 1.3 section 4.1.1, point (6) whose snippet is below.
"The unicast GID address 0:0:0:0:0:0:0:0 is reserved - referred to as
the Reserved GID. It shall never be assigned to any endport. It shall
not be used as a destination address or in a global routing header
(GRH)."
GID table cache now only stores valid GID entries. Before this patch,
Reserved GID 0:0:0:0:0:0:0:0 was searchable in the GID table using
ib_find_cached_gid_by_port() and other similar find routines.
Zero GID is no longer searchable as it shall not to be present in GRH or
path recored entry as described in IB spec version 1.3 section 4.1.1,
point (6), section 12.7.10 and section 12.7.20.
ib_cache_update() is simplified to check link layer once, use unified
locking scheme for all link layers, removed temporary gid table
allocation/free logic.
Additionally,
(a) Expand ib_gid_attr to store port and index so that GID query
routines can get port and index information from the attribute structure.
(b) Expand ib_gid_attr to store device as well so that in future code when
GID reference counting is done, device is used to reach back to the GID
table entry.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
query_gid() should return right GID value for iWarp and IB link layers.
It is a no-op for RoCE link layer. Update the documentation to reflect
this.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c,
we had some overlapping changes:
1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE -->
MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE
2) In 'net-next' params->log_rq_size is renamed to be
params->log_rq_mtu_frames.
3) In 'net-next' params->hard_mtu is added.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rdma_cm_state enum is internal to rdma_cm kernel module.
It is not required to expose state enums to ULP modules.
So lets keep its scope limited to rdma_cm module in cma_priv.h file.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Since the rdma_port_space enum is being passed between user and kernel for
user cm_id setup, we need it in a UAPI header. So add it to
rdma_user_cm.h.
This also fixes the cm_id restrack changes which pass up the port space
value via the RDMA_NLDEV_ATTR_RES_PS attribute.
Fixes: 00313983cda6 ("RDMA/nldev: provide detailed CM_ID information")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This is no longer supported, so remove it.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
There are several places in the ucma ABI where userspace can pass in a
sockaddr but set the address family to AF_IB. When that happens,
rdma_addr_size() will return a size bigger than sizeof struct sockaddr_in6,
and the ucma kernel code might end up copying past the end of a buffer
not sized for a struct sockaddr_ib.
Fix this by introducing new variants
int rdma_addr_size_in6(struct sockaddr_in6 *addr);
int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr);
that are type-safe for the types used in the ucma ABI and return 0 if the
size computed is bigger than the size of the type passed in. We can use
these new variants to check what size userspace has passed in before
copying any addresses.
Reported-by: <syzbot+6800425d54ed3ed8135d@syzkaller.appspotmail.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Currently access to hardware stats buffer isn't protected, this can
result in multiple writes and reads at the same time to the same
memory location. This can lead to providing an incorrect value to
the user. Add a mutex to protect against it.
Fixes: b40f4757daa1 ("IB/core: Make device counter infrastructure dynamic")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Last user is gone after bdf5bd7f2132 "rds: tcp: remove
register_netdevice_notifier infrastructure.", so we can
remove this netdevice command. This allows to delete
rtnl_lock() in netdev_run_todo(), which is hot path for
net namespace unregistration.
dev_change_net_namespace() and netdev_wait_allrefs()
have rcu_barrier() before NETDEV_UNREGISTER_FINAL call,
and the source commits say they were introduced to
delemit the call with NETDEV_UNREGISTER, but this patch
leaves them on the places, since they require additional
analysis, whether we need in them for something else.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently CM request for RoCE follows following flow.
rdma_create_id()
rdma_resolve_addr()
rdma_resolve_route()
For RC QPs:
rdma_connect()
->cma_connect_ib()
->ib_send_cm_req()
->cm_init_av_by_path()
->ib_init_ah_attr_from_path()
For UD QPs:
rdma_connect()
->cma_resolve_ib_udp()
->ib_send_cm_sidr_req()
->cm_init_av_by_path()
->ib_init_ah_attr_from_path()
In both the flows, route is already resolved before sending CM requests.
Therefore, code is refactored to avoid resolving route second time in
ib_cm layer.
ib_init_ah_attr_from_path() is extended to resolve route when it is not
yet resolved for RoCE link layer. This is achieved by caller setting
route_resolved field in path record whenever it has route already
resolved.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The restrack clean routine had simple, but powerful WARN_ON check
to see if all resources are cleared prior to releasing device.
The WARN_ON check performed very well, but lack of information
which device caused to resource leak, the object type and origin
made debug to be fun and challenging at the same time.
The fact that all dumps were the same because restrack_clean() is
called in dealloc() didn't help either.
So let's fix spelling error and convert WARN_ON to be more debug
friendly. The dmesg cut below gives example of how the output
will look output for the case fixed in patch [1]
[ 438.421372] restrack: ------------[ cut here ]------------
[ 438.423448] restrack: BUG: RESTRACK detected leak of resources on mlx5_2
[ 438.425600] restrack: Kernel PD object allocated by mlx5_ib is not freed
[ 438.427753] restrack: Kernel CQ object allocated by mlx5_ib is not freed
[ 438.429660] restrack: ------------[ cut here ]------------
[1] https://patchwork.kernel.org/patch/10298695/
Cc: Michal Kalderon <Michal.Kalderon@cavium.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Previously, adding driver specific attributes required drivers to
declare all the hierarchy - object tree, object, methods and the
attributes themselves. A common use case is adding a few attributes to
an existing common method.
In order to simplify the driver's code, we add some macros to do all
these declarations automatically.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Currently, all objects are declared in uverbs_std_types. This could lead
to a huge file once we implement all objects, methods and handlers.
Moving each object to its own file to keep the files smaller and more
readable. uverbs_std_types.c will only contain the parsing tree
definition and objects without any methods.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The ioctl() based uverbs is based on merging feature trees. This teaches
the generic parser how to parse methods according to the provider's
support. In order to support merging with the common objects, exporting
the common-object-tree to the provider drivers.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
Linus Torvalds
Bharat Potnuri
Matthew Wilcox
Leon Romanovsky
Max Gurtovoy
Jason Gunthorpe
Raed Salem
Matan Barak
Jack Morgenstein
Parav Pandit
Steve Wise
Ariel Levkovich
Lidong Chen
Brian Welty
Sebastian Sanchez
Boris Pismenny
David S. Miller
Roland Dreier
Mark Bloch
Kirill Tkhai