aboutsummaryrefslogtreecommitdiffstats
path: root/include/scsi (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2010-12-31[SCSI] libiscsi: do not take host lock in queuecommandMike Christie1-1/+2
iscsi_tcp, ib_iser, cxgb*, be2iscsi and bnx2i do not use the host lock and do not take the session lock against a irq, so this patch drops the DEF_SCSI_QCMD use. Instead we just take the session lock and disable bhs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-31[SCSI] libiscsi: add more informative failure message during iscsi scsi ehMike Christie1-0/+1
This adds a more informative error code and message for the iscsi scsi eh session drop paths. This allows you to distinguish if the session was dropped due to a connection failure vs the iscsi layer dropping the session due to scsi eh failure processing. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] Add missing SPC-4 CDB and MAINTENANCE_[IN,OUT] service action definitionsNicholas Bellinger1-0/+28
This patch adds a handful of missing CDBs defs that are used by TCM persistent reservation logic in the SPC-4 defined CDB exclusion table for registrations and reservations. This includes a number of missing MI_* and MO_* prefixed service actions defs for MAINTENANCE_IN and MAINTENANCE_OUT that are mentioned wrt to persistent registration and reservation status for the SCSI Initiator Port. Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] libfc: fix statistics for FCP input/output megabytesJoe Eykholt1-4/+4
The statistics for InputMegabytes and OutputMegabytes are misnamed. They're accumulating bytes, not megabytes. The statistic returned via /sys must be in megabytes, however, which is what the HBA-API wants. The FCP code needs to accumulate it in bytes and then divide by 1,000,000 (not 2^20) before it presented via sysfs. This affects fcoe.ko only, not fnic. The fnic driver correctly by accumulating bytes and then converts to megabytes. I checked that libhbalinux is using the /sys file directly without conversion. BTW, qla2xxx does divide by 2^20, which I'm not fixing here. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] libfcoe: retry rejected FLOGI to another FCF if possibleJoe Eykholt1-0/+8
Switches using multiple-FCFs may reject FLOGI in order to balance the load between multiple FCFs. Even though the FCF was available, it may have more load at the point we actually send the FLOGI. If the FLOGI fails, select a different FCF if possible, among those with the same priority. If no other FCF is available, just deliver the reject to libfc for retry. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] libfc: remove tgt_flags from fc_fcp_pkt structjohn fastabend1-2/+0
We can easily remove the tgt_flags from fc_fcp_pkt struct and use rpriv->tgt_flags directly where needed. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] bnx2i: Added fix for NOP-Out response panic from unsolicited NOP-InEddie Wai1-0/+1
The patch fixes the following situations where NOP-Out pkt is called for: - local unsolicited NOP-Out requests (requesting no NOP-In response) - local NOP-Out responses to unsolicited NOP-In requests kernel panic is observed due to double session spin_lock requests; one in the bnx2i_process_nopin_local_cmpl routine in bnx2i_hwi.c and the other in the iscsi_put_task routine in libiscsi.c The proposed fix is to export the currently static __iscsi_put_task() routine and have bnx2i call it directly instead of the iscsi_put_task() routine which holds the session spin lock. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Anil Veerabhadrappa <anilgv@broadcom.com> Acked-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] libsas: fix definition of wideport, include local sas addressDan Williams1-0/+2
To date libsas has only looked at the attached sas address when determining the formation of wide ports. The specification and some hardware expects that phys with different addresses will not form a wide port unless the local peer phys also match each other. Introduce a flag to select stricter behavior at sas_register_ha() time. The flag can be dropped once it is known that all libsas users expect the same behavior. Current drivers just initialize this field to zero and get the traditional behavior. Reported-by: Patrick Thomson <patrick.s.thomson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-16sr: implement sr_check_events()Tejun Heo1-0/+1
Replace sr_media_change() with sr_check_events(). It normally only uses GET_EVENT_STATUS_NOTIFICATION to check both media change and eject request. If @clearing includes DISK_EVENT_MEDIA_CHANGE, it issues TUR and compares whether media presence has changed. The SCSI specific media change uevent is kept for compatibility. sr_media_change() was doing both media change check and revalidation. The revalidation part is split into sr_block_revalidate_disk(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-16SCSI host lock push-downJeff Garzik4-8/+24
Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König1-2/+2
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-26[SCSI] libosd: write/read_sg_kern APIBoaz Harrosh1-0/+7
This is a trivial addition to the SG API that can receive kernel pointers. It is only used by the out-of-tree test module. So it's immediate need is questionable. For maintenance ease it might just get in, as it's very small. John. do you need this in the Kernel, or is it only for osd_ktest.ko? Signed-off-by: John A. Chandy <john.chandy@uconn.edu> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26[SCSI] libosd: Support for scatter gather write/read commandsBoaz Harrosh3-1/+55
This patch adds the Scatter-Gather (sg) API to libosd. Scatter-gather enables a write/read of multiple none-contiguous areas of an object, in a single call. The extents may overlap and/or be in any order. The Scatter-Gather list is sent to the target in what is called a "cdb continuation segment". This is yet another possible segment in the osd-out-buffer. It is unlike all other segments in that it sits before the actual "data" segment (which until now was always first), and that it is signed by itself and not part of the data buffer. This is because the cdb-continuation-segment is considered a spill-over of the CDB data, and is therefor signed under OSD_SEC_CAPKEY and higher. TODO: A new osd_finalize_request_ex version should be supplied so the @caps received on the network also contains a size parameter and can be spilled over into the "cdb continuation segment". Thanks to John Chandy <john.chandy@uconn.edu> for the original code, and investigations. And the implementation of SG support in the osd-target. Original-coded-by: John Chandy <john.chandy@uconn.edu> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] libfc: Do not let disc work cancel itselfBhanu Prakash Gollapudi1-1/+1
When number of NPIV ports created are greater than the xids allocated per pool -- for eg., creating 255 NPIV ports on a system with nr_cpu_ids of 32, with each pool containing 128 xids -- and then generating a link event - for eg., shutdown/no shutdown -- on the switch port causes the hang with the following stack trace. Call Trace: schedule_timeout+0x19d/0x230 wait_for_common+0xc0/0x170 __cancel_work_timer+0xcf/0x1b0 fc_disc_stop+0x16/0x30 [libfc] fc_lport_reset_locked+0x47/0x90 [libfc] fc_lport_enter_reset+0x67/0xe0 [libfc] fc_lport_disc_callback+0xbc/0xe0 [libfc] fc_disc_done+0xa8/0xf0 [libfc] fc_disc_timeout+0x29/0x40 [libfc] run_workqueue+0xb8/0x140 worker_thread+0x96/0x110 kthread+0x96/0xa0 child_rip+0xa/0x20 Fix is to not cancel the disc_work if discovery is already stopped, thus allowing lport state machine to restart and try discovery again. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Acked-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-22IB/srp: Implement SRP_CRED_REQ and SRP_AER_REQDavid Dillow1-0/+38
This patch adds support for SRP_CRED_REQ to avoid a lockup by targets that use that mechanism to return credits to the initiator. This prevents a lockup observed in the field where we would never add the credits from the SRP_CRED_REQ to our current count, and would therefore never send another command to the target. Minimal support for SRP_AER_REQ is also added, as these messages can also be used to convey additional credits to the initiator. Based upon extensive debugging and code by Bart Van Assche and a bug report by Chris Worley. Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-22USB: gadget: storage: reuse definitions from scsi.h header fileMichal Nazarewicz1-0/+2
This commit changes storage_common.h, file_storage.c and f_mass_storage.c to use definitions of SCSI commands from scsi/scsi.h file instead of redefining the commands in storage_common.c. scsi/scsi.h header file was missing READ_FORMAT_CAPACITIES and READ_HEADER so this commit also add those to the header. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22scsi/sd: add a no_read_capacity_16 scsi_device flagHans de Goede1-0/+1
I seem to have a knack for digging up buggy usb devices which don't work with Linux, and I'm crazy enough to try to make them work. So this time a friend of mine asked me to get an mp4 player (an mp3 player which can play videos on a small screen) to work with Linux. It is based on the well known rockbox chipset for which we already have an unusual devs entries to work around some of its bugs. But this model comes with an additional twist. This model chokes on read_capacity_16 calls. Now normally we don't make those calls, but this model comes with an sdcard slot and when there is no card in there (and shipped from the factory there is none), it reports a size of 0. However this time the programmers actually got the read_capacity_10 response right! So they substract one from the size as stored internally in the mp3 player before reporting it back, resulting in an answer of ... 0xffffffff sectors, causing sd.c to try a read_capacity_16, on which the device crashes. This patch adds a flag to scsi_device to indicate that a a device cannot handle read_capacity_16, and when this flag is set if a device reports an lba of 0xffffffff as answer to a read_capacity_10, assumes it tries to report a size of 0. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22scsi/sr: add no_read_disc_info scsi_device flagHans de Goede1-0/+1
Some USB devices emulate a usb-mass-storage attached (scsi) cdrom device, usually this fake cdrom contains the windows software for the device. While working on supporting Appotech ax3003 based photoframes, which do this I discovered that they will go of into lala land when ever they see a READ_DISC_INFO scsi command. Thus this patch adds a scsi_device flag (which can then be set by the usb-storage driver through an unsual-devs entry), to indicate this, and makes the sr driver honor this flag. I know this sucks, but as discussed on linux-scsi list there is no other way to make this device work properly. Looking at usb traces made under windows, windows never sends a READ_DISC_INFO during normal interactions with a usb cdrom device. So as this cdrom emulation thingie becomes more common we might see more of this problem. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-08[SCSI] libsas: Don't issue commands to devices that have been hot-removedDarrick J. Wong1-0/+1
sd will get hung up issuing commands to flush write cache if a SAS device behind the expander is unplugged without warning. Change libsas to reject commands to domain devices that have already gone away. [maciej.trela@intel.com: removed setting ->gone in sas_deform_port() to permit sync cache commands at module removal] Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Tested-by: Haipao Fan <haipao.fan@intel.com> Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-07[SCSI] fc class: add fc host dev loss sysfs fileMike Christie1-4/+3
This adds a fc host dev loss sysfs file. Instead of calling into the driver using the get_host_def_dev_loss_tmo callback, we allow drivers to init the dev loss like is done for other fc host params, and then the fc class will handle updating the value if the user writes to the new sysfs file. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-10block/scsi: Provide a limit on the number of integrity segmentsMartin K. Petersen2-0/+13
Some controllers have a hardware limit on the number of protection information scatter-gather list segments they can handle. Introduce a max_integrity_segments limit in the block layer and provide a new scsi_host_template setting that allows HBA drivers to provide a value suitable for the hardware. Add support for honoring the integrity segment limit when merging both bios and requests. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2010-09-10block: remove spurious uses of REQ_HARDBARRIERTejun Heo1-5/+1
REQ_HARDBARRIER is deprecated. Remove spurious uses in the following users. Please note that other than osdblk, all other uses were already spurious before deprecation. * osdblk: osdblk_rq_fn() won't receive any request with REQ_HARDBARRIER set. Remove the test for it. * pktcdvd: use of REQ_HARDBARRIER in pkt_generic_packet() doesn't mean anything. Removed. * aic7xxx_old: Setting MSG_ORDERED_Q_TAG on REQ_HARDBARRIER is spurious. Removed. * sas_scsi_host: Setting TASK_ATTR_ORDERED on REQ_HARDBARRIER is spurious. Removed. * scsi_tcq: The ordered tag path wasn't being used anyway. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Boaz Harrosh <bharrosh@panasas.com> Cc: James Bottomley <James.Bottomley@suse.de> Cc: Peter Osterlund <petero2@telia.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-05[SCSI] fc class: add fc host default default dev loss settingMike Christie1-0/+4
This patch adds a fc_host setting to store the default dev_loss_tmo. It is used if the driver has a callack to get the value from the LLD. If the callback is not set, then we use the fc class module default value. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-11scsi: use __uX types for headers exported to user spacePeter Korsgaard2-6/+6
Commit 9e4f5e29 ("FC Pass Thru support") exported a number of header files in include/scsi to user space, but didn't change the uX types to the userspace-compatible __uX types. Without that you'll get compile errors when including them - E.G.: include/scsi/scsi.h:145: error: expected specifier-qualifier-list before `u8' Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: James Smart <james.smart@emulex.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-28[SCSI] implement runtime Power ManagementAlan Stern1-0/+8
This patch (as1398b) adds runtime PM support to the SCSI layer. Only the machanism is provided; use of it is up to the various high-level drivers, and the patch doesn't change any of them. Except for sg -- the patch expicitly prevents a device from being runtime-suspended while its sg device file is open. The implementation is simplistic. In general, hosts and targets are automatically suspended when all their children are asleep, but for them the runtime-suspend code doesn't actually do anything. (A host's runtime PM status is propagated up the device tree, though, so a runtime-PM-aware lower-level driver could power down the host adapter hardware at the appropriate times.) There are comments indicating where a transport class might be notified or some other hooks added. LUNs are runtime-suspended by calling the drivers' existing suspend handlers (and likewise for runtime-resume). Somewhat arbitrarily, the implementation delays for 100 ms before suspending an eligible LUN. This is because there typically are occasions during bootup when the same device file is opened and closed several times in quick succession. The way this all works is that the SCSI core increments a device's PM-usage count when it is registered. If a high-level driver does nothing then the device will not be eligible for runtime-suspend because of the elevated usage count. If a high-level driver wants to use runtime PM then it can call scsi_autopm_put_device() in its probe routine to decrement the usage count and scsi_autopm_get_device() in its remove routine to restore the original count. Hosts, targets, and LUNs are not suspended while they are being probed or removed, or while the error handler is running. In fact, a fairly large part of the patch consists of code to make sure that things aren't suspended at such times. [jejb: fix up compile issues in PM config variations] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] Unify SAM_ and SAM_STAT_ macrosJames Bottomley1-10/+1
We have two separate definitions for identical constants with nearly the same name. One comes from the generic headers in scsi.h; the other is an enum in libsas.h ... it's causing confusion about which one is correct (fortunately they both are). Fix this by eliminating the libsas.h duplicate Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] iscsi_transport: wait on session in error handler pathMike Christie1-0/+2
wait for session to come online in eh_device_reset_handler and eh_target_reset_handler Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfc: don't require a local exchange for incoming requestsJoe Eykholt1-11/+5
Incoming requests shouldn't require a local exchange if we're just going to reply with one or two frames and don't expect anything further. Don't allocate exchanges for such requests until requested by the upper-layer protocol. The sequence is always NULL for new requests, so remove that as an argument to request handlers. Also change the first argument to lport->tt.seq_els_rsp_send from the sequence pointer to the received frame pointer, to supply the exchange IDs and destination ID info. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfc: add interface to allocate a sequence for incoming requestsJoe Eykholt1-0/+7
For incoming ELS and FCP requests, we often don't require an exchange and sequence, however, sometimes we do. For those cases, (primarily FCP requests for targets) add a function to set up the exchange and sequence. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfc: add fc_fill_reply_hdr() and fc_fill_hdr()Joe Eykholt2-0/+11
Add functions to fill in an FC header given a request header. These reduces code lines in fc_lport and fc_rport and works without an exchange/sequence assigned. fc_fill_reply_hdr() fills a header for a final reply frame. fc_fill_hdr() which is similar but allows specifying the f_ctl parameter. Add defines for F_CTL values FC_FCTL_REQ and FC_FCTL_RESP. These can be used for most request and response sequences. v2 of patch adds a line to copy the frame encapsulation info from the received frame. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfc: add fc_frame_sid() and fc_frame_did() functionsJoe Eykholt2-19/+44
To pave the way for eliminating exchanges from incoming requests, add simple inline fc_frame_sid() and fc_frame_did() functions which get the FC_IDs from the frame header. This can be almost as efficient as getting them from the sequence/exchange. Move ntohll, htonll, ntoh24 and hton24 to <scsi/fc_frame.h> since we need them there and that's included by <scsi/libfc.h> Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfc: eliminate rport LOGO stateJoe Eykholt1-2/+0
The LOGO state hasn't been used in a while, except in a brief transition to DELETE state while holding the rport mutex. All port LOGO responses have been ignored as well as any timeout if we don't get a response. So this patch just removes LOGO state and simplifies the response handler. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfcoe: fcoe: fnic: add FIP VN2VN point-to-multipoint supportJoe Eykholt1-1/+41
The FC-BB-6 committee is proposing a new FIP usage model called VN_port to VN_port mode. It allows VN_ports to discover each other over a loss-free L2 Ethernet without any FCF or Fibre-channel fabric services. This is point-to-multipoint. There is also a variant of this called point-to-point which provides for making sure there is just one pair of ports operating over the Ethernet fabric. We add these new states: VNMP_START, _PROBE1, _PROBE2, _CLAIM, and _UP. These usually go quickly in that sequence. After waiting a random amount of time up to 100 ms in START, we select a pseudo-random proposed locally-unique port ID and send out probes in states PROBE1 and PROBE2, 100 ms apart. If no probe responses are heard, we proceed to CLAIM state 400 ms later and send a claim notification. We wait another 400 ms to receive claim responses, which give us a list of the other nodes on the network, including their FC-4 capabilities. After another 400 ms we go to VNMP_UP state and should start interoperating with any of the nodes for whic we receivec claim responses. More details are in the spec.j Add the new mode as FIP_MODE_VN2VN. The driver must specify explicitly that it wants to operate in this mode. There is no automatic detection between point-to-multipoint and fabric mode, and the local port initialization is affected, so it isn't anticipated that there will ever be any such automatic switchover. It may eventually be possible to have both fabric and VN2VN modes on the same L2 network, which may be done by two separate local VN_ports (lports). When in VN2VN mode, FIP replaces libfc's fabric-oriented discovery module with its own simple code that adds remote ports as they are discovered from incoming claim notifications and responses. These hooks are placed by fcoe_disc_init(). A linear list of discovered vn_ports is maintained under the fcoe_ctlr struct. It is expected to be short for now, and accessed infrequently. It is kept under RCU for lock-ordering reasons. The lport and/or rport mutexes may be held when we need to lookup a fcoe_vnport during an ELS send. Change fcoe_ctlr_encaps() to lookup the destination vn_port in the list of peers for the destination MAC address of the FIP-encapsulated frame. Add a new function fcoe_disc_init() to initialize just the discovery portion of libfcoe for VN2VN mode. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfcoe: add protocol description of FIP VN2VN modeJoe Eykholt2-3/+50
The FC-BB-6 committee is proposing a new FIP usage model called VN_port to VN_port mode. It allows VN_ports to discover each other over a loss-free L2 Ethernet without any FCF or Fibre-channel fabric services. This is point-to-multipoint. There is also a variant of this called point-to-point which provides for making sure there is just one pair of ports operating over the Ethernet fabric. This patch defines the new message type and subtypes as well as one new descriptor type used by VN2VN mode. These are all still at the proposed stage and subject to change. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfc: track FIP exchangesJoe Eykholt2-0/+5
When an exchange is received with a FIP encapsulation, we need to know that the response must be sent via FIP and what the original ELS opcode was. This becomes important for VN2VN mode, where we may receive FLOGI or LOGO from several peer VN_ports, and the LS_ACC or LS_RJT must be sent FIP-encapsulated with the correct sub-type. Add a field to the struct fc_frame, fr_encaps, to indicate the encapsulation values. That term is chosen to be neutral and LLD-agnostic in case non-FCoE/FIP LLDs might find it useful. The frame fr_encaps is transferred from the ingress frame to the exchange by fc_exch_recv_req(), and back to the outgoing frame by fc_seq_send(). This is taking the last byte in the skb->cb array. If needed, we could combine the info in sof, eof, flags, and encaps together into one field, but it'd be better to do that if and when its needed. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfc: add FLOGI state to rport for VN2VNJoe Eykholt2-0/+6
The FIP proposal for VN_port to VN_port point-to-multipoint operation requires a FLOGI be sent to each remote port. The FLOGI is sent with the assigned S_ID and D_IDs of the local and remote ports. This and the response get FIP-encapsulated for Ethernet. Add FLOGI state to the remote port state machine. This will be skipped if not in point-to-multipoint mode. To reduce a little duplication between PLOGI and FLOGI response handling, added fc_rport_login_complete(), which handles the parameters for the rdata struct. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfc: Add local port point-to-multipoint flagJoe Eykholt1-0/+2
For VN_port to VN_port mode, the transport sets the port_id and there's no lport FLOGI. This is similar to FC loop mode. Add a point_to_multipoint flag that indicates the local port is in point-to-multipoint mode. This skips FLOGI and discovery. It also skips resetting the port_id on resets other than link down. Add function fc_lport_set_local_id() that sets the local port_id. This is called by libfcoe on behalf of the low-level driver to set the port_id when the link comes up. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfcoe: fcoe: fnic: change fcoe_ctlr_init interface to specify modeJoe Eykholt1-1/+10
There are three modes that libfcoe currently supports, and a new one is coming. Change the fcoe_ctlr_init() interface to add the mode desired. This should not change any functionality. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfc: add discovery-private pointer for LLDJoe Eykholt1-2/+7
For VN_port to VN_port mode, FIP will do discovery and needs a way to find its state from the local port or discovery structure. It seems that any other LLD that implements its own discovery would also need something like this. Replace disc->lport with disc->priv, and use container_of to find the lport. We could use disc->priv for that, but container_of is smaller and faster. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfcoe: convert FIP to lock with mutex instead of spin lockJoe Eykholt1-7/+2
It turns out most of the FIP work is now done from worker threads or process context now, so there's no need to use a spin lock. Change to use mutex instead of spin lock and delayed_work instead of a timer. This will make it nicer for the VN_port to VN_port feature that will interact more with the libfc layers requiring that spinlocks not be held. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfc: provide space for LLD after remote port structureJoe Eykholt1-0/+2
Add pre-zeroed space after the allocation for fc_rport_priv for use by the lower-level driver. This is primarily for VN2VN FIP mode, but could be used in other ways someday. The space required is specified in lport->rport_priv_size. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfc: convert rport lookup to be RCU safeJoe Eykholt1-0/+2
To allow LLD to do lookups on rports without grabbing a mutex, make them RCU-safe. The caller of lport->tt.rport_lookup will have the choice of holding disc_mutex or the rcu_read_lock(). Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] fcoe: adds src and dest mac address checking for fcoe framesVasu Dev1-0/+10
This is per FC-BB-5 Annex-D recommendation and per that if address checking fails then drop the frame. FIP code paths are already doing this so only needed for fcoe frames. The src address checking is limited to only fip mode since this might break non-fip mode used in p2p due to used OUI based addressing in some p2p code paths, going forward FIP will be the only mode, therefore limited this to only FIP mode so that it won't break non-fip p2p mode for now. -v2 Removes FCOE packet type checking since fcoe_rcv is registered to receive only FCoE type packets from netdev and it is already checked by netdev. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] fcoe: make it possible to verify fcoe with sparseBart Van Assche1-2/+2
Analyzing fcoe with sparse currently fails. This is because struct fcoe_rcv_info contains two enum members that have been declared with __attribute__((packed)). Apparently gcc honors this attribute while sparse ignores it. The result is that sizeof(struct fcoe_rcv_info) == sizeof(struct sk_buff::cb) == 48 on a 64-bit system according to gcc, but not according to sparse. The patch below modifies the definition of struct fcoe_rcv_info such that gcc and sparse interpret this structure definition in the same way. The current sparse output is as follows: $ cd linux-2.6.34 $ make C=2 M=drivers/scsi/fcoe modules CHECK drivers/scsi/fcoe/fcoe.c include/scsi/fc_frame.h:81:9: error: invalid bitfield width, -1. CC [M] drivers/scsi/fcoe/fcoe.o CHECK drivers/scsi/fcoe/libfcoe.c include/scsi/fc_frame.h:81:9: error: invalid bitfield width, -1. drivers/scsi/fcoe/libfcoe.c:56:37: error: invalid initializer Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com> Cc: jeykholt@cisco.com Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] iscsi_transport: added new iscsi_param to display target alias in sysfsVikas Chaudhary1-0/+2
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] libfc: fix indefinite rport restartJoe Eykholt1-0/+2
Remote ports were restarting indefinitely after getting rejects in PRLI. Fix by adding a counter of restarts and limiting that with the port login retry limit as well. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] libfc: Fix remote port restart problemJoe Eykholt1-3/+2
This patch somewhat combines two fixes to remote port handing in libfc. The first problem was that rport work could be queued on a deleted and freed rport. This is handled by not resetting rdata->event ton NONE if the rdata is about to be deleted. However, that fix led to the second problem, described by Bhanu Gollapudi, as follows: > Here is the sequence of events. T1 is first LOGO receive thread, T2 is > fc_rport_work() scheduled by T1 and T3 is second LOGO receive thread and > T4 is fc_rport_work scheduled by T3. > > 1. (T1)Received 1st LOGO in state Ready > 2. (T1)Delete port & enter to RESTART state. > 3. (T1)schdule event_work, since event is RPORT_EV_NONE. > 4. (T1)set event = RPORT_EV_LOGO > 5. (T1)Enter RESTART state as disc_id is set. > 6. (T2)remember to PLOGI, and set event = RPORT_EV_NONE > 6. (T3)Received 2nd LOGO > 7. (T3)Delete Port & enter to RESTART state. > 8. (T3)schedule event_work, since event is RPORT_EV_NONE. > 9. (T3)Enter RESTART state as disc_id is set. > 9. (T3)set event = RPORT_EV_LOGO > 10.(T2)work restart, enter PLOGI state and issues PLOGI > 11.(T4)Since state is not RESTART anymore, restart is not set, and the > event is not reset to RPORT_EV_NONE. (current event is RPORT_EV_LOGO). > 12. Now, PLOGI succeeds and fc_rport_enter_ready() will not schedule > event_work, and hence the rport will never be created, eventually losing > the target after dev_loss_tmo. So, the problem here is that we were tracking the desire for the rport be restarted by state RESTART, which was otherwise equivalent to DELETE. A contributing factor is that we dropped the lock between steps 6 and 10 in thread T2, which allows the state to change, and we didn't completely re-evaluate then. This is hopefully corrected by the following minor redesign: Simplify the rport restart logic by making the decision to restart after deleting the transport rport. That decision is based on a new STARTED flag that indicates fc_rport_login() has been called and fc_rport_logoff() has not been called since then. This replaces the need for the RESTART state. Only restart if the rdata is still in DELETED state and only if it still has the STARTED flag set. Also now, since we clear the event code much later in the work thread, allow for the possibility that the rport may have become READY again via incoming PLOGI, and if so, queue another event to handle that. In the problem scenario, the second LOGO received will cause the LOGO event to occur again. Reported-by: Bhanu Gollapudi <bprakash@broadcom.com> Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] libfc: Handle unsolicited PRLO requestBhanu Prakash Gollapudi1-0/+9
Resubmitting after incorporating Joe's review comment. Unsolicited PRLO request is now handled by sending LS_ACC, and then relogin to the remote port if an N-port login session exists for that remote port. Note that this patch should be applied on top of Joe Eykholt's "Fix remote port restart problem" patch. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] fcoe: clean up TBD comments in FCoE prototype headerJoe Eykholt1-11/+4
Some old comments in fc_fcoe.h say TBD long after the standard has been passed by T11. Clean them up. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-06-02SCSI: implement sd_unlock_native_capacity()Tejun Heo1-0/+8
Implement sd_unlock_native_capacity() method which calls into hostt->unlock_native_capacity() if implemented. This will be invoked by block layer if partitions extend beyond the end of the device and can be used to implement, for example, on-demand ATA host protected area unlocking. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>