aboutsummaryrefslogtreecommitdiffstats
path: root/include/soc (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-02-08Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds5-162/+213
Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+16
2020-01-12riscv: move sifive_l2_cache.h to include/socYash Shah1-0/+16
The commit 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") moves the sifive L2 cache driver to driver/soc. It did not move the header file along with the driver. Therefore this patch moves the header file to driver/soc Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> [paul.walmsley@sifive.com: updated to fix the include guard] Fixes: 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-05net: mscc: ocelot: export ANA, DEV and QSYS registers to include/soc/msccVladimir Oltean3-0/+1170
Since the Felix DSA driver is implementing its own PHYLINK instance due to SoC differences, it needs access to the few registers that are common, mainly for flow control. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05net: mscc: ocelot: make phy_mode a member of the common struct ocelot_portVladimir Oltean1-0/+2
The Ocelot switchdev driver and the Felix DSA one need it for different reasons. Felix (or at least the VSC9959 instantiation in NXP LS1028A) is integrated with the traditional NXP Layerscape PCS design which does not support runtime configuration of SerDes protocol. So it needs to pre-validate the phy-mode from the device tree and prevent PHYLINK from attempting to change it. For this, it needs to cache it in a private variable. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09soc: fsl: qe: avoid IS_ERR_VALUE in ucc_fast.cRasmus Villemoes1-2/+2
When building this on a 64-bit platform gcc rightly warns that the error checking is broken (-ENOMEM stored in an u32 does not compare greater than (unsigned long)-MAX_ERRNO). Instead, change the ucc_fast_[tr]x_virtual_fifo_base_offset members to s32 and use an ordinary check-for-negative. Also, this avoids treating 0 as "this cannot have been returned from qe_muram_alloc() so don't free it". Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: avoid IS_ERR_VALUE in ucc_slow.cRasmus Villemoes1-3/+3
When trying to build this for a 64-bit platform, one gets warnings from using IS_ERR_VALUE on something which is not sizeof(long). Instead, change the various *_offset fields to store a signed integer, and simply check for a negative return from qe_muram_alloc(). Since qe_muram_free() now accepts and ignores a negative argument, we only need to make sure these fields are initialized with -1, and we can just unconditionally call qe_muram_free() in ucc_slow_free(). Note that the error case for us_pram_offset failed to set that field to 0 (which, as noted earlier, is anyway a bogus sentinel value). Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: make cpm_muram_free() return voidRasmus Villemoes1-3/+2
Nobody uses the return value from cpm_muram_free, and functions that free resources usually return void. One could imagine a use for a "how much have I allocated" a la ksize(), but knowing how much one had access to after the fact is useless. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: change return type of cpm_muram_alloc() to s32Rasmus Villemoes1-8/+8
There are a number of problems with cpm_muram_alloc() and its callers. Most callers assign the return value to some variable and then use IS_ERR_VALUE to check for allocation failure. However, when that variable is not sizeof(long), this leads to warnings - and it is indeed broken to do e.g. u32 foo = cpm_muram_alloc(); if (IS_ERR_VALUE(foo)) on a 64-bit platform, since the condition foo >= (unsigned long)-ENOMEM is tautologically false. There are also callers that ignore the possibility of error, and then there are those that check for error by comparing the return value to 0... One could fix that by changing all callers to store the return value temporarily in an "unsigned long" and test that. However, use of IS_ERR_VALUE() is error-prone and should be restricted to things which are inherently long-sized (stuff in pt_regs etc.). Instead, let's aim for changing to the standard kernel style int foo = cpm_muram_alloc(); if (foo < 0) deal_with_it() some->where = foo; Changing the return type from unsigned long to s32 (aka signed int) doesn't change the value that gets stored into any of the callers' variables except if the caller was storing the result in a u64 _and_ the allocation failed, so in itself this patch should be a no-op. Another problem with cpm_muram_alloc() is that it can certainly validly return 0 - and except if some cpm_muram_alloc_fixed() call interferes, the very first cpm_muram_alloc() call will return just that. But that shows that both ucc_slow_free() and ucc_fast_free() are buggy, since they assume that a value of 0 means "that field was never allocated". We'll later change cpm_muram_free() to accept (and ignore) a negative offset, so callers can use a sentinel of -1 instead of 0 and just unconditionally call cpm_muram_free(). Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc/fsl/qe/qe.h: update include path for cpm.hRasmus Villemoes1-1/+1
asm/cpm.h under arch/powerpc is now just a wrapper for including soc/fsl/cpm.h. In order to make the qe.h header usable on other architectures, use the latter path directly. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: move cpm.h from powerpc/include/asm to include/soc/fslRasmus Villemoes1-0/+171
Some drivers, e.g. ucc_uart, need definitions from cpm.h. In order to allow building those drivers for non-ppc based SOCs, move the header to include/soc/fsl. For now, leave a trivial wrapper at the old location so drivers can be updated one by one. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: merge qe_ic.h headers into qe_ic.cRasmus Villemoes1-56/+0
The public qe_ic.h header is no longer included by anything but qe_ic.c. Merge both headers into qe_ic.c, and drop the unused constants. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: make qe_ic_get_{low,high}_irq staticRasmus Villemoes1-10/+0
These are only called from within qe_ic.c, so make them static. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: remove unused qe_ic_set_* functionsRasmus Villemoes1-4/+0
There are no current callers of these functions, and they use the ppc-specific virq_to_hw(). So removing them gets us one step closer to building QE support for ARM. If the functionality is ever actually needed, the code can be dug out of git and then adapted to work on all architectures, but for future reference please note that I believe qe_ic_set_priority is buggy: The "priority < 4" should be "priority <= 4", and in the else branch 24 should be replaced by 28, at least if I'm reading the data sheet right. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: move qe_ic_cascade_* functions to qe_ic.cRasmus Villemoes1-42/+0
These functions are only ever called through a function pointer, and therefore it makes no sense for them to be "static inline" - gcc has no choice but to emit a copy in each translation unit that takes the address of one of these. Since they are now only referenced from qe_ic.c, just make them local to that file. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: move calls of qe_ic_init out of arch/powerpc/Rasmus Villemoes1-7/+0
Having to call qe_ic_init() from platform-specific code makes it awkward to allow building the QE drivers for ARM. It's also a needless duplication of code, and slightly error-prone: Instead of the caller needing to know the details of whether the QUICC Engine High and QUICC Engine Low are actually the same interrupt (see e.g. the machine_is() in mpc85xx_mds_qeic_init), just let the init function choose the appropriate handlers after it has parsed the DT and figured it out. If the two interrupts are distinct, use separate handlers, otherwise use the handler which first checks the CHIVEC register (for the high priority interrupts), then the CIVEC. All existing callers pass 0 for flags, so continue to do that from the new single caller. Later cleanups will remove that argument from qe_ic_init and simplify the body, as well as make qe_ic_init into a proper init function for an IRQCHIP_DECLARE, eliminating the need to manually look up the fsl,qe-ic node. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: use qe_ic_cascade_{low, high}_mpic also on 83xxRasmus Villemoes1-20/+4
The *_ipic and *_mpic handlers are almost identical - the only difference is that the latter end with an unconditional chip->irq_eoi() call. Since IPIC does not have ->irq_eoi, we can reduce some code duplication by calling irq_eoi conditionally. This is similar to what is already done in mpc8xxx_gpio_irq_cascade(). This leaves the functions slightly misnamed, but that will be fixed in a subsequent patch. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: introduce qe_io{read,write}* wrappersRasmus Villemoes1-9/+25
The QUICC engine drivers use the powerpc-specific out_be32() etc. In order to allow those drivers to build for other architectures, those must be replaced by iowrite32be(). However, on powerpc, out_be32() is a simple inline function while iowrite32be() is out-of-line. So in order not to introduce a performance regression on powerpc when making the drivers work on other architectures, introduce qe_io* helpers. Also define the qe_{clr,set,clrset}bits* helpers in terms of these new macros. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09soc: fsl: qe: rename qe_(clr/set/clrset)bit* helpersRasmus Villemoes1-9/+9
Make it clear that these operate on big-endian registers (i.e. use the iowrite*be primitives) before we introduce more uses of them and allow the QE drivers to be built for platforms other than ppc32. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-06Merge tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+65
Pull more drm updates from Dave Airlie: "Rob pointed out I missed his pull request for msm-next, it's been in next for a while outside of my tree so shouldn't cause any unexpected issues, it has some OCMEM support in drivers/soc that is acked by other maintainers as it's outside my tree. Otherwise it's a usual fixes pull, i915, amdgpu, the main ones, with some tegra, omap, mgag200 and one core fix. Summary: msm-next: - OCMEM support for a3xx and a4xx GPUs. - a510 support + display support core: - mst payload deletion fix i915: - uapi alignment fix - fix for power usage regression due to security fixes - change default preemption timeout to 640ms from 100ms - EHL voltage level display fixes - TGL DGL PHY fix - gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning - CI spotted deadlock fix - EHL port D programming fix amdgpu: - VRAM lost fixes on BACO for CI/VI - navi14 DC fixes - misc SR-IOV, gfx10 fixes - XGMI fixes for arcturus - SRIOV fixes amdkfd: - KFD on ppc64le enabled - page table optimisations radeon: - fix for r1xx/2xx register checker. tegra: - displayport regression fixes - DMA API regression fixes mgag200: - fix devices that can't scanout except at 0 addr omap: - fix dma_addr refcounting" * tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm: (100 commits) drm/dp_mst: Correct the bug in drm_dp_update_payload_part1() drm/omap: fix dma_addr refcounting drm/tegra: Run hub cleanup on ->remove() drm/tegra: sor: Make the +5V HDMI supply optional drm/tegra: Silence expected errors on IOMMU attach drm/tegra: vic: Export module device table drm/tegra: sor: Implement system suspend/resume drm/tegra: Use proper IOVA address for cursor image drm/tegra: gem: Remove premature import restrictions drm/tegra: gem: Properly pin imported buffers drm/tegra: hub: Remove bogus connection mutex check ia64: agp: Replace empty define with do while agp: Add bridge parameter documentation agp: remove unused variable num_segments agp: move AGPGART_MINOR to include/linux/miscdevice.h agp: remove unused variable size in agp_generic_create_gatt_table drm/dp_mst: Fix build on systems with STACKTRACE_SUPPORT=n drm/radeon: fix r1xx/r2xx register checker for POT textures drm/amdgpu: fix GFX10 missing CSIB set(v3) drm/amdgpu: should stop GFX ring in hw_fini ...
2019-12-05Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-1/+1
Pull ARM SoC driver updates from Olof Johansson: "Various driver updates for platforms: - A larger set of work on Tegra 2/3 around memory controller and regulator features, some fuse cleanups, etc.. - MMP platform drivers, in particular for USB PHY, and other smaller additions. - Samsung Exynos 5422 driver for DMC (dynamic memory configuration), and ASV (adaptive voltage), allowing the platform to run at more optimal operating points. - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas - Clock/reset control driver for TI/OMAP - Meson-A1 reset controller support - Qualcomm sdm845 and sda845 SoC IDs for socinfo" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits) firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT soc: fsl: add RCPM driver dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition memory: tegra: Consolidate registers definition into common header memory: tegra: Ensure timing control debug features are disabled memory: tegra: Introduce Tegra30 EMC driver memory: tegra: Do not handle error from wait_for_completion_timeout() memory: tegra: Increase handshake timeout on Tegra20 memory: tegra: Print a brief info message about EMC timings memory: tegra: Pre-configure debug register on Tegra20 memory: tegra: Include io.h instead of iopoll.h memory: tegra: Adapt for Tegra20 clock driver changes memory: tegra: Don't set EMC rate to maximum on probe for Tegra20 memory: tegra: Add gr2d and gr3d to DRM IOMMU group memory: tegra: Set DMA mask based on supported address bits soc: at91: Add Atmel SFR SN (Serial Number) support memory: atmel-ebi: switch to SPDX license identifiers memory: atmel-ebi: move NUM_CS definition inside EBI driver soc: mediatek: Refactor bus protection control soc: mediatek: Refactor sram control ...
2019-11-27net: mscc: ocelot: use skb queue instead of skbs listYangbo Lu1-8/+1
Convert to use skb queue instead of the list of skbs. The skb queue could provide protection with lock. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: mscc: ocelot: convert to use ocelot_port_add_txtstamp_skb()Yangbo Lu1-0/+2
Convert to use ocelot_port_add_txtstamp_skb() for adding skbs which require TX timestamp into list. Export it so that DSA Felix driver could reuse it too. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: mscc: ocelot: convert to use ocelot_get_txtstamp()Yangbo Lu1-1/+8
The method getting TX timestamp by reading timestamp FIFO and matching skbs list is common for DSA Felix driver too. So move code out of ocelot_board.c, convert to use ocelot_get_txtstamp() function and export it. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: mscc: ocelot: export ocelot_hwstamp_get/set functionsYangbo Lu1-0/+2
Export ocelot_hwstamp_get/set functions so that DSA driver is able to reuse them. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15net: mscc: ocelot: publish ocelot_sys.h to include/soc/msccVladimir Oltean1-0/+144
The Felix DSA driver needs to write to SYS_RAM_INIT_RAM_INIT for its own chip initialization process. Also update the MAINTAINERS file such that the headers exported by the ocelot driver are under the same maintainers' umbrella as the driver itself. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15net: mscc: ocelot: publish structure definitions to include/soc/mscc/ocelot.hVladimir Oltean1-0/+539
We will be registering another switch driver based on ocelot, which lives under drivers/net/dsa. Make sure the Felix DSA front-end has the necessary abstractions to implement a new Ocelot driver instantiation. This includes the function prototypes for implementing DSA callbacks. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11memory: tegra: Introduce Tegra30 EMC driverDmitry Osipenko1-1/+1
Introduce driver for the External Memory Controller (EMC) found on Tegra30 chips, it controls the external DRAM on the board. The purpose of this driver is to program memory timing for external memory on the EMC clock rate change. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-10-31dpaa_eth: register a device link for the qman portal usedMadalin Bucur1-7/+0
Before this change, unbinding the QMan portals did not trigger a corresponding unbinding of the dpaa_eth making use of it; the first QMan portal related operation issued afterwards crashed the kernel. The device link ensures the dpaa_eth dependency upon the qman portal used is honoured at the QMan portal removal. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31soc: fsl: qbman: allow registering a device link for the portal userMadalin Bucur1-0/+18
Introduce the API required to make sure that the devices that use the QMan portal are unbound when the portal is unbound. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07soc: qcom: ocmem: add missing includesBrian Masney1-0/+3
The kbuild bot reported the following compiler errors when compiling on MIPS with CONFIG_QCOM_OCMEM disabled: In file included from <command-line>:0:0: >> include/soc/qcom/ocmem.h:43:49: warning: 'struct device' declared inside parameter list will not be visible outside of this definition or declaration static inline struct ocmem *of_get_ocmem(struct device *dev) ^~~~~~ include/soc/qcom/ocmem.h: In function 'of_get_ocmem': >> include/soc/qcom/ocmem.h:45:9: error: implicit declaration of function 'ERR_PTR' [-Werror=implicit-function-declaration] return ERR_PTR(-ENODEV); ^~~~~~~ >> include/soc/qcom/ocmem.h:45:18: error: 'ENODEV' undeclared (first use in this function) return ERR_PTR(-ENODEV); Add the proper includes to fix the compiler errors. Signed-off-by: Brian Masney <masneyb@onstation.org> Reported-by: kbuild test robot <lkp@intel.com> Tested-by: Gabriel Francisco <frc.gabriel@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07soc: qcom: add OCMEM driverBrian Masney1-0/+62
The OCMEM driver handles allocation and configuration of the On Chip MEMory that is present on some Snapdragon SoCs. Devices which have OCMEM do not have GMEM inside the GPU core, so the GPU must instead use OCMEM to be functional. Since the GPU is currently the only OCMEM user with an upstream driver, this is just a minimal implementation sufficient for statically allocating to the GPU it's chunk of OCMEM. This driver currently does not read the gmu-sram node that is described in the device tree bindings. The starting memory address of the GPU's reserved memory region is hardcoded to zero to match what the hardware expects. The driver can be updated to read the reserved memory regions from device tree once other users of OCMEM are added upstream. Signed-off-by: Brian Masney <masneyb@onstation.org> Co-developed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Gabriel Francisco <frc.gabrielgmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-18Merge tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds1-1/+19
Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver pull request for 5.4-rc1. As has been happening in previous releases, more and more individual driver subsystem trees are ending up in here. Now if that is good or bad I can't tell, but hopefully it makes your life easier as it's more of an aggregation of trees together to one merge point for you. Anyway, lots of stuff in here: - habanalabs driver updates - thunderbolt driver updates - misc driver updates - coresight and intel_th hwtracing driver updates - fpga driver updates - extcon driver updates - some dma driver updates - char driver updates - android binder driver updates - nvmem driver updates - phy driver updates - parport driver fixes - pcmcia driver fix - uio driver updates - w1 driver updates - configfs fixes - other assorted driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits) misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation habanalabs: correctly cast variable to __le32 habanalabs: show correct id in error print habanalabs: stop using the acronym KMD habanalabs: display card name as sensors header habanalabs: add uapi to retrieve aggregate H/W events habanalabs: add uapi to retrieve device utilization habanalabs: Make the Coresight timestamp perpetual habanalabs: explicitly set the queue-id enumerated numbers habanalabs: print to kernel log when reset is finished habanalabs: replace __le32_to_cpu with le32_to_cpu habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64 habanalabs: Handle HW_IP_INFO if device disabled or in reset habanalabs: Expose devices after initialization is done habanalabs: improve security in Debug IOCTL habanalabs: use default structure for user input in Debug IOCTL habanalabs: Add descriptive name to PSOC app status register habanalabs: Add descriptive names to PSOC scratch-pad registers habanalabs: create two char devices per ASIC habanalabs: change device_setup_cdev() to be more generic ...
2019-09-11Merge branches 'arm/omap', 'arm/exynos', 'arm/smmu', 'arm/mediatek', 'arm/qcom', 'arm/renesas', 'x86/amd', 'x86/vt-d' and 'core' into nextJoerg Roedel1-5/+0
2019-09-03Merge tag 'icc-5.4-rc1' of https://git.linaro.org/people/georgi.djakov/linux into char-misc-nextGreg Kroah-Hartman1-1/+19
Georgi writes: interconnect patches for 5.4 Here are the interconnect driver updates for the 5.4-rc1 merge window. - New feature is the path tagging support that helps with grouping and aggregating the bandwidth requests into separate buckets based on a tag. - The first user of the path tagging is the Qualcomm sdm845 driver that now implements support for wake/sleep sets. This allows consumer drivers to express their bandwidth needs for the different CPU power states. - New interconnect driver for the qcs404 platforms and a driver that communicates bandwidth requests with remote processor over shared memory. - Cleanups and fixes. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> * tag 'icc-5.4-rc1' of https://git.linaro.org/people/georgi.djakov/linux: drivers: qcom: Add BCM vote macro to header interconnect: qcom: remove COMPILE_TEST from CONFIG_INTERCONNECT_QCOM_QCS404 interconnect: qcom: Add QCS404 interconnect provider driver interconnect: qcom: Add interconnect RPM over SMD driver dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings interconnect: qcom: Add tagging and wake/sleep support for sdm845 interconnect: Add pre_aggregate() callback interconnect: Add support for path tags
2019-08-30iommu/mediatek: Clean up struct mtk_smi_iommuYong Wu1-4/+0
Remove the "struct mtk_smi_iommu" to simplify the code since it has only one item in it right now. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-30memory: mtk-smi: Get rid of need_larbidYong Wu1-1/+0
The "mediatek,larb-id" has already been parsed in MTK IOMMU driver. It's no need to parse it again in SMI driver. Only clean some codes. This patch is fit for all the current mt2701, mt2712, mt7623, mt8173 and mt8183. After this patch, the "mediatek,larb-id" only be needed for mt2712 which have 2 M4Us. In the other SoCs, we can get the larb-id from M4U in which the larbs in the "mediatek,larbs" always are ordered. Correspondingly, the larb_nr in the "struct mtk_smi_iommu" could also be deleted. CC: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-27Merge tag 'arc-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds1-0/+11
Pull ARC updates from Vineet Gupta: - support for Edge Triggered IRQs in ARC IDU intc - other fixes here and there * tag 'arc-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arc: prefer __section from compiler_attributes.h dt-bindings: IDU-intc: Add support for edge-triggered interrupts dt-bindings: IDU-intc: Clean up documentation ARCv2: IDU-intc: Add support for edge-triggered interrupts ARC: unwind: Mark expected switch fall-throughs ARC: [plat-hsdk]: allow to switch between AXI DMAC port configurations ARC: fix typo in setup_dma_ops log message ARCv2: entry: early return from exception need not clear U & DE bits
2019-08-26ARCv2: IDU-intc: Add support for edge-triggered interruptsMischa Jonker1-0/+11
This adds support for an optional extra interrupt cell to specify edge vs level triggered. It is backward compatible with dts files with only one cell, and will default to level-triggered in such a case. Note that I had to make a change to idu_irq_set_affinity as well, as this function was setting the interrupt type to "level" unconditionally, since this was the only type supported previously. Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com> Reviewed-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-08-20drivers: qcom: Add BCM vote macro to headerJordan Crouse1-1/+19
The macro to generate a Bus Controller Manager (BCM) TCS command is used by the interconnect driver but might also be interesting to other drivers that need to construct TCS commands for sub processors so move it out of the sdm845 specific file and into the header. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-07-22Merge branch 'pdf_fixes_v1' of https://git.linuxtv.org/mchehab/experimental into mauroJonathan Corbet1-1/+1
Bring in a set of post-thrashup fixes from Mauro.
2019-07-19Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2-0/+17
Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: - A driver for SCU (system control) on NXP i.MX8QXP - Qualcomm Always-on Subsystem messaging driver (AOSS QMP) - Qualcomm PM support for MSM8998 - Support for a newer version of DRAM PHY driver for Broadcom (DPFE) - Reset controller support for Bitmain BM1880 - TI SCI (System Control Interface) support for CPU control on AM654 processors - More TI sysc refactoring and rework" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits) reset: remove redundant null check on pointer dev soc: rockchip: work around clang warning dt-bindings: reset: imx7: Fix the spelling of 'indices' soc: imx: Add i.MX8MN SoC driver support soc: aspeed: lpc-ctrl: Fix probe error handling soc: qcom: geni: Add support for ACPI firmware: ti_sci: Fix gcc unused-but-set-variable warning firmware: ti_sci: Use the correct style for SPDX License Identifier soc: imx8: Use existing of_root directly soc: imx8: Fix potential kernel dump in error path firmware/psci: psci_checker: Park kthreads before stopping them memory: move jedec_ddr.h from include/memory to drivers/memory/ memory: move jedec_ddr_data.c from lib/ to drivers/memory/ MAINTAINERS: Remove myself as qcom maintainer soc: aspeed: lpc-ctrl: make parameter optional soc: qcom: apr: Don't use reg for domain id soc: qcom: fix QCOM_AOSS_QMP dependency and build errors memory: tegra: Fix -Wunused-const-variable firmware: tegra: Early resume BPMP soc/tegra: Select pinctrl for Tegra194 ...
2019-07-17docs: powerpc: convert docs to ReST and rename to *.rstMauro Carvalho Chehab1-1/+1
Convert docs to ReST and add them to the arch-specific book. The conversion here was trivial, as almost every file there was already using an elegant format close to ReST standard. The changes were mostly to mark literal blocks and add a few missing section title identifiers. One note with regards to "--": on Sphinx, this can't be used to identify a list, as it will format it badly. This can be used, however, to identify a long hyphen - and "---" is an even longer one. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> # cxl
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner13-53/+13
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-17Merge tag 'soc-fsl-next-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/driversOlof Johansson2-0/+17
NXP/FSL SoC driver updates for v5.3 DPAA2 Console driver - Add driver to export two char devices to dump logs for MC and AIOP DPAA2 DPIO driver - Add support for memory backed QBMan portals - Increase the timeout period to prevent false error - Add APIs to retrieve QBMan portal probing status DPAA Qman driver - Only make liodn fixup on powerpc SoCs with PAMU iommu * tag 'soc-fsl-next-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: qbman_portals: add APIs to retrieve the probing status soc: fsl: qman: fixup liodns only on ppc targets soc: fsl: dpio: Add support for memory backed QBMan portals bus: mc-bus: Add support for mapping shareable portals soc: fsl: dpio: Increase timeout for QBMan Management Commands soc: fsl: add DPAA2 console support Documentation: DT: Add entry for DPAA2 console soc: fsl: guts: Add definition for LX2160A Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 399Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 33 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081038.745679586@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner6-54/+6
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner1-10/+1
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201Thomas Gleixner2-24/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.