path: root/include/sound (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-01-14ALSA: constify functions in ac97Hanno Boeck1-1/+1
Signed-off-by: Hanno Boeck <hanno@hboeck.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-13Merge branch 'topic/asoc' into for-linusTakashi Iwai4-57/+177
2011-01-10ALSA: core, oxygen, virtuoso: add an enum control info helperClemens Ladisch1-1/+3
Introduce the helper function snd_ctl_enum_info() to fill out the elem_info fields for an enumerated control. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-17ASoC: soc-dapm: Introduce the new snd_soc_dapm_virt_mux typeDimitris Papastamos1-0/+9
This new type is a virtual version of snd_soc_dapm_mux. It is used when a backing register value is not necessary for deciding which input path to connect. A simple virtual enumeration control e.g. SOC_DAPM_ENUM_VIRT() can be exposed to userspace which will be used to choose which path to connect. The snd_soc_dapm_virt_mux type ensures that during the initial path setup, the first (which is also the default) input path will be connected. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-17ASoC: Do DAPM control updates in the middle of DAPM sequencesMark Brown1-0/+10
Attempt to minimise audible effects from mixer and mux updates by implementing the actual register changes between powering down widgets that have become unused and powering up widgets that are newly used. This means that we're making the change with the minimum set of widgets powered, that the input path is connected when we're powering up widgets (so things like DC offset correction can run with their signal active) and that we bring things down to cold before switching away. Since hardware tends to be designed for the power on/off case more than for dynamic reconfiguration this should minimise pops and clicks during reconfiguration while active. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-15ASoC: Extend DAPM to handle power changes on cross-device pathsJarkko Nikula2-0/+6
Power change event like stream start/stop or kcontrol change in a cross-device path originates from one device but codec bias and widget power changes must be populated to another devices on that path as well. This patch modifies the dapm_power_widgets so that all the widgets on a sound card are checked for a power change, not just those that are specific to originating device. Also bias management is extended to check all the devices. Only exception in bias management are widgetless codecs whose bias state is changed only if power change is originating from that context. DAPM context test is added to dapm_seq_run to take care of if power sequence extends to an another device which requires separate register writes. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-15ASoC: Move widgets from DAPM context to snd_soc_cardJarkko Nikula2-1/+2
Decoupling widgets from DAPM context is required when extending the ASoC core to cross-device paths. Even the list of widgets are now kept in struct snd_soc_card, the widget listing in sysfs and debugs remain sorted per device. This patch makes possible to build cross-device paths but does not extend yet the DAPM to handle codec bias and widget power changes of an another device. Cross-device paths are registered by listing the widgets from device A in a map for device B. In case of conflicting widget names between the devices, a uniform name prefix is needed to separate them. See commit ead9b91 "ASoC: Add optional name_prefix for kcontrol, widget and route names" for help. An example below shows a path that connects MONO out of A into Line In of B: static const struct snd_soc_dapm_route mapA[] = { {"MONO", NULL, "DAC"}, }; static const struct snd_soc_dapm_route mapB[] = { {"Line In", NULL, "MONO"}, }; Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-15ASoC: Move DAPM paths from DAPM context to snd_soc_cardJarkko Nikula2-1/+2
Decoupling DAPM paths from DAPM context is a first prerequisite when extending ASoC core to cross-device paths. This patch is almost a nullop and does not allow to construct cross-device setup but the path clean-up part in dapm_free_widgets is prepared to remove cross-device paths between a device being removed and others. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-15ASoC: Remove unused DAPM_DOUBLE control typesMark Brown1-16/+0
There are no users of these and it's not clear what they would do given the mono flow modelling which DAPM does. If need arises we can add them again. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: dapm: Add output driver widgetOlaya, Margarita1-0/+10
In some cases it was not possible to follow the appropiate power ON/OFF sequence like in cases where the PGA needs to be enabled before the driver and disabled before the PGA for pop reduction. Add a widget to support output driver (speaker, haptic, vibra, etc) drivers where power ON/OFF ordering is important. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-13Merge branch 'topic/workq-update' into topic/miscTakashi Iwai1-2/+4
2010-12-13Merge branch 'topic/workq-update' into topic/asocTakashi Iwai1-2/+4
Conflicts: sound/soc/codecs/wm8350.c sound/soc/codecs/wm8753.c sound/soc/sh/fsi.c sound/soc/soc-core.c
2010-12-09ASoC: Remove unnecessary structure definitionsSeungwhan Youn1-3/+0
This patch removes some legacy structure definitions which are not using in current ASoC drivers. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06ASoC: soc-cache: Add optional cache name member to snd_soc_cache_opsDimitris Papastamos1-0/+1
Added an optional name member to snd_soc_cache_ops to enable more sensible diagnostic messages during cache init, exit and sync. Remove redundant newline in source code. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06ASoC: Add post-CODEC bias level callback for machine driverMark Brown1-0/+2
Currently the machine driver can only do bias level configuration before the CODEC bias level is brought up. This means that the machine cannot do any configuration which depends on the CODEC bias level being maintained. Provide a post-CODEC callback which allows the machine driver to do things like enable the FLL on a CODEC which is brought down to BIAS_OFF when idle. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-03ASoC: Constify struct snd_soc_codec_driverMark Brown1-2/+2
Allow the CODEC driver structure to be marked const by making all the APIs that use it do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-03ASoC: soc-core: Allow machine drivers to override compress_typeDimitris Papastamos1-0/+1
This patch allows machine drivers to override the compression type provided by the codec driver. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-03ASoC: soc-cache: Use reg_def_copy instead of reg_cache_defaultDimitris Papastamos1-0/+1
Make sure to use codec->reg_def_copy instead of codec_drv->reg_cache_default wherever necessary. This change is necessary because in the next patch we move the cache initialization code outside snd_soc_register_codec() and by that time any data marked as __devinitconst such as the original reg_cache_default array might have already been freed by the kernel. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-03ASoC: soc-core: Generalize snd_soc_prefix_map and rename to snd_soc_codec_confDimitris Papastamos1-7/+15
The snd_soc_codec_conf struct now holds codec specific configuration information. A new configuration option has been added to allow machine drivers to override the compression type set by the codec driver. In the absence of providing an snd_soc_codec_conf struct or when providing one but not setting the compress_type member to anything, the one supplied by the codec driver will be used instead. In all other cases the one set in the snd_soc_codec_conf struct takes effect. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-03ASoC: Change the base value of compress_typeDimitris Papastamos1-1/+1
Ensure that the base value of compress_type starts at 1 so that we know whether the machine driver has provided a compress_type for overriding the codec supplied one. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-03ASoC: Add compress_type as a member to snd_soc_codecDimitris Papastamos1-0/+1
We need to keep a copy of the compress_type supplied by the codec driver so that we can override it if necessary with whatever the machine driver has provided us with. The reason for not modifying the codec->driver struct directly is that ideally we'd like to keep it const. Adjust the code in soc-cache and soc-core to make use of the compress_type member in the snd_soc_codec struct. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-03ASoC: Move active copy of CODEC read and write into runtime structureMark Brown1-0/+2
We shouldn't be assigning to the driver structure (which really ought to be const, further patch to follow) though there's unlikely to be any actual problem except in the unlikely case that two devices with the same driver but different bus types appear in the same system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-03ASoC: Make the DAI ops constant in the DAI structureMark Brown1-1/+1
Neither drivers nor the core should be fiddling with the actual ops structure at runtime. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-01ALSA: hdsp - Add support for RPM io boxFlorian Faber1-0/+1
Add support for the RME HDSP RPM IO box. Changes have been made in the identification of the IO box and the neccessary controls have been added. Signed-off-by: Florian Faber <faberman@linuxproaudio.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-30ASoC: Add support for optional auxiliary dailess codecsJarkko Nikula1-0/+17
This makes possible to register auxiliary dailess codecs in a machine driver. Term dailess is used here for amplifiers and codecs without DAI or DAI being unused. Dailess auxiliary codecs are kept in struct snd_soc_aux_dev and those codecs are probed after initializing the DAI links. There are no major differences between DAI link codecs and dailess codecs in ASoC core point of view. DAPM handles them equally and sysfs and debugfs directories for dailess codecs are similar except the pmdown_time node is not created. Only suspend and resume functions are modified to traverse all probed codecs instead of DAI link codecs. Example below shows a dailess codec registration. struct snd_soc_aux_dev foo_aux_dev[] = { { .name = "Amp", .codec_name = "codec.2", .init = foo_init2, }, }; static struct snd_soc_card card = { ... .aux_dev = foo_aux_dev, .num_aux_devs = ARRAY_SIZE(foo_aux_dev), }; Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-29ASoC: soc-cache: Ensure consistent cache namingDimitris Papastamos1-1/+1
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-24ARM: mach-shmobile: ap4evb: FSI clock use proper process for HDMIKuninori Morimoto1-2/+4
Current AP4 FSI set_rate function used bogus clock process which didn't care enable/disable and clk->usecound. To solve this issue, this patch also modify FSI driver to call set_rate with enough options. This patch modify it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24ALSA: support module on-demand loading for seq and timerKay Sievers1-2/+2
If CONFIG_SND_DYNAMIC_MINORS is used, assign /dev/snd/seq and /dev/snd/timer the usual static minors, and export specific module aliases to generate udev module on-demand loading instructions: $ cat /lib/modules/ # Device nodes to trigger on-demand module loading. microcode cpu/microcode c10:184 fuse fuse c10:229 ppp_generic ppp c108:0 tun net/tun c10:200 uinput uinput c10:223 dm_mod mapper/control c10:236 snd_timer snd/timer c116:33 snd_seq snd/seq c116:1 The last two lines instruct udev to create device nodes, even when the modules are not loaded at that time. As soon as userspace accesses any of these nodes, the in-kernel module-loader will load the module, and the device can be used. The header file minor calculation needed to be simplified to make __stringify() (supports only two indirections) in the MODULE_ALIAS macro work. This is part of systemd's effort to get rid of unconditional module load instructions and needless init scripts. Cc: Lennart Poettering <lennart@poettering.net> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-22ASoC: Remove cyclic dependency between soc.h and soc-dapm.h/soc-dai.hJarkko Nikula2-3/+0
There is no need anymore to include soc.h in soc-dapm.h and soc-dai.h as drivers are converted to include only soc.h. Thanks to Lars-Peter Clausen <lars@metafoo.de> for pointing out the issue. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22ALSA: pcm: support for period wakeup disablingClemens Ladisch2-0/+4
This patch allows to disable period interrupts which are not needed when the application relies on a system timer to wake-up and refill the ring buffer. The behavior of the driver is left unchanged, and interrupts are only disabled if the application requests this configuration. The behavior in case of underruns is slightly different, instead of being detected during the period interrupts the underruns are detected when the application calls snd_pcm_update_avail, which in turns forces a refresh of the hw pointer and shows the buffer is empty. More specifically this patch makes a lot of sense when PulseAudio relies on timer-based scheduling to access audio devices such as HDAudio or Intel SST. Disabling interrupts removes two unwanted wake-ups due to period elapsed events in low-power playback modes. It also simplifies PulseAudio voice modules used for speech calls. To quote Lennart "This patch looks very interesting and desirable. This is something have long been waiting for." Support for this in hardware drivers is optional. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-15ASoC: Add optional name_prefix for codec kcontrol, widget and route namesJarkko Nikula1-0/+13
There is a need to prefix codec kcontrol, widget and internal route names in an ASoC machine that has multiple codecs with conflicting names. The name collision would occur when codec drivers try to registering kcontrols with the same name or when building audio paths. This patch introduces optional prefix_map into struct snd_soc_card. With it machine drivers can specify a unique name prefix to each codec that have conflicting names with anothers. Prefix to codec is matched with codec name. Following example illustrates a machine that has two same codec instances. Name collision from kcontrol registration is avoided by specifying a name prefix "foo" for the second codec. As the codec widget names are prefixed then second audio map for that codec shows a prefixed widget name. static const struct snd_soc_dapm_route map0[] = { {"Spk", NULL, "MONO"}, }; static const struct snd_soc_dapm_route map1[] = { {"Vibra", NULL, "foo MONO"}, }; static struct snd_soc_prefix_map codec_prefix[] = { { .dev_name = "codec.2", .name_prefix = "foo", }, }; static struct snd_soc_card card = { ... .prefix_map = codec_prefix, .num_prefixes = ARRAY_SIZE(codec_prefix), }; Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11ASoC: soc-cache: Add support for rbtree based register cachingDimitris Papastamos1-1/+2
This patch adds support for rbtree compression when storing the register cache. It does this by not adding any uninitialized registers (those whose value is 0). If any of those registers is written with a nonzero value they get added into the rbtree. Consider a sample device with a large sparse register map. The register indices are between [0, 0x31ff]. An array of 12800 registers is thus created each of which is 2 bytes. This results in a 25kB region. This array normally lives outside soc-core, normally in the driver itself. The original soc-core code would kmemdup this region resulting in 50kB total memory. When using the rbtree compression technique and __devinitconst on the original array the figures are as follows. For this typical device, you might have 100 initialized registers, that is registers that are nonzero by default. We build an rbtree with 100 nodes, each of which is 24 bytes. This results in ~2kB of memory. Assuming that the target arch can freeup the memory used by the initial __devinitconst array, we end up using about ~2kB bytes of actual memory. The memory footprint will increase as uninitialized registers get written and thus new nodes created in the rbtree. In practice, most of those registers are never changed. If the target arch can't freeup the __devinitconst array, we end up using a total of ~27kB. The difference between the rbtree and the LZO caching techniques, is that if using the LZO technique the size of the cache will increase slower as more uninitialized registers get changed. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11ASoC: soc-cache: Add support for LZO register cachingDimitris Papastamos1-1/+2
This patch adds support for LZO compression when storing the register cache. The initial register defaults cache is marked as __devinitconst and the only change required for a driver to use LZO compression is to set the compress_type member in codec->driver to SND_SOC_LZO_COMPRESSION. For a typical device whose register map would normally occupy 25kB or 50kB by using the LZO compression technique, one can get down to ~5-7kB. There might be a performance penalty associated with each individual read/write due to decompressing/compressing the underlying cache, however that should not be noticeable. These memory benefits depend on whether the target architecture can get rid of the memory occupied by the original register defaults cache which is marked as __devinitconst. Nevertheless there will be some memory gain even if the target architecture can't get rid of the original register map, this should be around ~30-32kB instead of 50kB. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-11ASoC: soc-cache: Add support for flat register cachingDimitris Papastamos1-0/+27
This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-06ASoC: Move pop time from DAPM context to sound cardJarkko Nikula2-2/+3
Based on discussion the dapm_pop_time in debugsfs should be per card rather than per device. Single pop time value for entire card is cleaner when the DAPM sequencing is extended to cross-device paths. debugfs/asoc/{card->name}/{codec dir}/dapm_pop_time -> debugfs/asoc/{card->name}/dapm_pop_time Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-06ASoC: Add sound card directory under debugfs/asoc/Jarkko Nikula1-0/+4
There will be need to have sound card specific debugfs entries. This patch introduces a new debugfs/asoc/{card->name}/ directory but does not add yet any entries there. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-06ASoC: Decouple DAPM from CODECsLiam Girdwood2-20/+38
Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-03ASoC: Push snd_soc_write() and snd_soc_read() into the source fileMark Brown1-11/+3
Facilitating adding trace type stuff. For a first pass add some dev_dbg() statements into them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-02Merge branch 'for-2.6.37' into HEADMark Brown1-6/+0
WARN() fix from Joe moved. Conflicts: sound/soc/codecs/wm_hubs.c
2010-11-01Merge branch 'for-2.6.37' into for-2.6.38Mark Brown5-3/+12
2010-10-25Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds13-168/+360
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits) ALSA: hda - Disable sticky PCM stream assignment for AD codecs ALSA: usb - Creative USB X-Fi volume knob support ALSA: ca0106: Use card specific dac id for mute controls. ALSA: ca0106: Allow different sound cards to use different SPI channel mappings. ALSA: ca0106: Create a nice spot for mapping channels to dacs. ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence. ALSA: ca0106: Pull out dac powering routine into separate function. ALSA: ca0106 - add Sound Blaster 5.1vx info. ASoC: tlv320dac33: Use usleep_range for delays ALSA: usb-audio: add Novation Launchpad support ALSA: hda - Add workarounds for CT-IBG controllers ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs ASoC: tpa6130a2: Error handling for broken chip ASoC: max98088: Staticise m98088_eq_band ASoC: soc-core: Fix codec->name memory leak ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066 ALSA: hda - Add some workarounds for Creative IBG ALSA: hda - Fix wrong SPDIF NID assignment for CA0110 ALSA: hda - Fix codec rename rules for ALC662-compatible codecs ALSA: hda - Add alc_init_jacks() call to other codecs ...
2010-10-25Merge branch 'topic/hda' into for-linusTakashi Iwai1-1/+3
2010-10-25Merge branch 'topic/asoc' into for-linusTakashi Iwai8-165/+349
Conflicts: arch/powerpc/platforms/85xx/p1022_ds.c
2010-10-22driver core: remove CONFIG_SYSFS_DEPRECATED_V2 but keep it for block devicesKay Sievers1-6/+0
This patch removes the old CONFIG_SYSFS_DEPRECATED_V2 config option, but it keeps the logic around to handle block devices in the old manner as some people like to run new kernel versions on old (pre 2007/2008) distros. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: "James E.J. Bottomley" <James.Bottomley@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-21ASoC: add support for alc562[123] codecsArnaud Patard (Rtp)1-0/+15
This patch is adding support for alc562[123] codecs. It's based on the source code available in HP source code and other places. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-18ASoC: Restore MAX98088 CODEC driverMark Brown1-0/+50
This reverts commit f6765502f8daae3d237a394889276c8987f3e299 and adds the missing include file. Signed-off-by: Peter Hsiang <Peter.Hsiang@maxim-ic.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-18ALSA: emu10k1: Fix warning: "CCR" redefinedNobuhiro Iwamatsu1-0/+2
CCR is defined in emu10k1, but SuperH is defined too. If user use this driver with SuperH, it becomes a double definition. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-17ALSA: tlv - Define numbers in sound/tlv.hTakashi Iwai1-1/+3
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-17ALSA: fix unused warnings with snd_power_get_stateMike Frysinger1-1/+1
If we compile the ASoC code with PM disabled, we hit stuff like: sound/soc/soc-dapm.c: In function 'snd_soc_dapm_suspend_check': sound/soc/soc-dapm.c:440: warning: unused variable 'codec' So tweak the stub macro to avoid these issues. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-13ASoC: don't register AC97 devices twiceMika Westerberg1-0/+1
With generic AC97 ASoC glue driver (codec/ac97.c), we get following warning when the device is registered (slightly stripped the backtrace): kobject (c5a863e8): tried to init an initialized object, something is seriously wrong. [<c00254fc>] (unwind_backtrace+0x0/0xec) [<c014fad0>] (kobject_init+0x38/0x70) [<c0171e94>] (device_initialize+0x20/0x70) [<c017267c>] (device_register+0xc/0x18) [<bf20db70>] (snd_soc_instantiate_cards+0x924/0xacc [snd_soc_core]) [<bf20e0d0>] (snd_soc_register_platform+0x16c/0x198 [snd_soc_core]) [<c0175304>] (platform_drv_probe+0x18/0x1c) [<c0174454>] (driver_probe_device+0xb0/0x16c) [<c017456c>] (__driver_attach+0x5c/0x7c) [<c0173cec>] (bus_for_each_dev+0x48/0x78) [<c0173600>] (bus_add_driver+0x98/0x214) [<c0174834>] (driver_register+0xa4/0x130) [<c001f410>] (do_one_initcall+0xd0/0x1a4) [<c0062ddc>] (sys_init_module+0x12b0/0x1454) This happens because the generic AC97 glue driver creates its codec->ac97 via calling snd_ac97_mixer(). snd_ac97_mixer() provides own version of snd_device.register which handles the device registration when snd_card_register() is called. To avoid registering the AC97 device twice, we add a new flag to the snd_soc_codec: ac97_created which tells whether the AC97 device was created by SoC subsystem. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>